Kai Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kai Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jingmei Zhang
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
4 shared publications - Lei Pan
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
4 shared publications - Yi Pang
Tianjin Chengjian University 1 School of Control and Mechanical Engineering Tianjin
4 shared publications - Dongxing Xu
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
2 shared publications - Junru Zhang
School of Electronics Information Engineering, Taiyuan University of Science and Technology,Taiyuan,China,030024
2 shared publications Beibei Wang
School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin, China
1 shared publication
Latest Publications
- 16 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (4) , 2845-2855
Modulation Method for Nine-Switch Converter Based on Equivalent Mechanism Between Nine-Switch Converter and Dual Six-Switch Converters
In this paper, the equivalent mechanism between Nine-Switch Converter (NSC) and the two Six-Switch Converters (SSCs) is explained in detail. In order to achieve the decoupling of the Upper and Lower AC terminals, the concept of Virtual-Leg is proposed and the decoupling model of NSC is established based on Virtual-Legs. In this model, the NSC is equivalent to dual constrained SSCs. Continually, the Space vector modulation (SVM) method of NSC is proposed based on dual constrained SSCs modulation for both Common Frequency (CF) and Different Frequency (DF) modes. In the proposed modulation method, the concept of Space Vector Distance Function (SVDF) is proposed. SVDF represents the actual switching times between any two actual working states of NSC. The closer distance between the two actual states is, the smaller actual switching loss will be. Using the modulation method, the NSC can realize the independent control of two sets of three-phase AC voltage and achieve the same control performance as the dual SSCs. The validity of the proposed converter is verified through simulations and experiments.
- 16 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (4) , 2845-2855
Modulation Method for Nine-Switch Converter Based on Equivalent Mechanism Between Nine-Switch Converter and Dual Six-Switch Converters
In this paper, the equivalent mechanism between Nine-Switch Converter (NSC) and the two Six-Switch Converters (SSCs) is explained in detail. In order to achieve the decoupling of the Upper and Lower AC terminals, the concept of Virtual-Leg is proposed and the decoupling model of NSC is established based on Virtual-Legs. In this model, the NSC is equivalent to dual constrained SSCs. Continually, the Space vector modulation (SVM) method of NSC is proposed based on dual constrained SSCs modulation for both Common Frequency (CF) and Different Frequency (DF) modes. In the proposed modulation method, the concept of Space Vector Distance Function (SVDF) is proposed. SVDF represents the actual switching times between any two actual working states of NSC. The closer distance between the two actual states is, the smaller actual switching loss will be. Using the modulation method, the NSC can realize the independent control of two sets of three-phase AC voltage and achieve the same control performance as the dual SSCs. The validity of the proposed converter is verified through simulations and experiments.
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (7) , 7674-7688
Modeling of Nine-Switch-Converter Based on Virtual Leg and Its Application in DFIG Wind Generation System
This paper proposes a doubly fed induction generator (DFIG) wind energy conversion system (WECS) based on nine-switch converter (NSC). In this paper, a new concept of Virtual-Leg is proposed, and the equivalent mechanism between the NSC and the dual six-switch converter is first proposed in this research. Furthermore, a mathematical model of the NSC based on the unipolar binary logic switching function is established. In order to simplify the mathematical model of the NSC-based DFIG-WECS, the parameters mapping relationship between the NSC with loads and the NSC-based DFIG-WECS under dq coordinate system is given. Meanwhile, the Adaptive Resonant PI (AR-PI) current controller based on the resonant controller, the PI controller, and the adaptive genetic algorithm is applied for the DFIG wind generation system. As a result, harmonic current content, overshoot, and dynamic response speed of the NSC-based DFIG-WECS have been significantly improved. Finally, the simulations and experimental results verify the validity and reliability of the proposed mathematical model and control algorithm.
- 9 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (7) , 7674-7688
Modeling of Nine-Switch-Converter Based on Virtual Leg and Its Application in DFIG Wind Generation System
This paper proposes a doubly fed induction generator (DFIG) wind energy conversion system (WECS) based on nine-switch converter (NSC). In this paper, a new concept of Virtual-Leg is proposed, and the equivalent mechanism between the NSC and the dual six-switch converter is first proposed in this research. Furthermore, a mathematical model of the NSC based on the unipolar binary logic switching function is established. In order to simplify the mathematical model of the NSC-based DFIG-WECS, the parameters mapping relationship between the NSC with loads and the NSC-based DFIG-WECS under dq coordinate system is given. Meanwhile, the Adaptive Resonant PI (AR-PI) current controller based on the resonant controller, the PI controller, and the adaptive genetic algorithm is applied for the DFIG wind generation system. As a result, harmonic current content, overshoot, and dynamic response speed of the NSC-based DFIG-WECS have been significantly improved. Finally, the simulations and experimental results verify the validity and reliability of the proposed mathematical model and control algorithm.
- 14 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1789-1804
A Novel Space-Vector Modulation Method for Nine-Switch Converter
Nine-switch converter (NSC) has been presented as a dual-output converter with common frequency (CF) or different frequency (DF) operation modes. This paper proposes a novel space-vector modulation (SVM) method for the NSC that supports both the CF and DF modes. This method is based on the simplification of the space-vector diagram of NSC into that of six-switch converter, and the SVM method for NSC can be done like conventional SSC. The proposed voltage vector selection method without using common logical xor operation and the calculation method for dwelling times of voltage vectors are described in detail. In addition, the modulation indices for two ac terminals of NSC have been analyzed deeply, and the derived fitting equations can guide engineering application. The performance of the proposed SVM is verified by the simulation and experimental results, and the low total harmonic distortions and harmonic components for phase currents prove the effectiveness of the proposed method.
- 14 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (2) , 1789-1804
A Novel Space-Vector Modulation Method for Nine-Switch Converter
Nine-switch converter (NSC) has been presented as a dual-output converter with common frequency (CF) or different frequency (DF) operation modes. This paper proposes a novel space-vector modulation (SVM) method for the NSC that supports both the CF and DF modes. This method is based on the simplification of the space-vector diagram of NSC into that of six-switch converter, and the SVM method for NSC can be done like conventional SSC. The proposed voltage vector selection method without using common logical xor operation and the calculation method for dwelling times of voltage vectors are described in detail. In addition, the modulation indices for two ac terminals of NSC have been analyzed deeply, and the derived fitting equations can guide engineering application. The performance of the proposed SVM is verified by the simulation and experimental results, and the low total harmonic distortions and harmonic components for phase currents prove the effectiveness of the proposed method.
- 8 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 8 (3) , 2870-2885
A New Three-Level Neutral-Point-Clamped Fifteen-Switch Inverter for Independent Control of Two Three-Phase Loads
A new topology of a three-level neutral-point-clamped fifteen-switch inverter is proposed. The FSI topology consists of three legs, of which each consists of five switches and two diodes. Afifteen-switch invertercan independently drive two three-phase loads. In addition, a new space vector modulation method suitable for thefifteen-switch inverter to drive two three-phase loads is described in detail; moreover, the space vector modulation method is suitable for both common-frequency and difference-frequency working modes of an FSI. The application on independent control of two three-phase loads for an FSI is verified well by simulations and experiments.
- 8 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 8 (3) , 2870-2885
A New Three-Level Neutral-Point-Clamped Fifteen-Switch Inverter for Independent Control of Two Three-Phase Loads
A new topology of a three-level neutral-point-clamped fifteen-switch inverter is proposed. The FSI topology consists of three legs, of which each consists of five switches and two diodes. Afifteen-switch invertercan independently drive two three-phase loads. In addition, a new space vector modulation method suitable for thefifteen-switch inverter to drive two three-phase loads is described in detail; moreover, the space vector modulation method is suitable for both common-frequency and difference-frequency working modes of an FSI. The application on independent control of two three-phase loads for an FSI is verified well by simulations and experiments.