Maysara Ghaith
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maysara Ghaith has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Yosri
Department of Civil Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada
5 shared publications - Zhong Li
Department of Civil Engineering, McMaster University, Hamilton, ON L8S 4L8, Canada
4 shared publications Wael El-Dakhakhni
Department of Civil Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada; School of Computational Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S4K1, Canada
3 shared publications- Wael El-Dakhakhni
McMaster University
3 shared publications Ahmad Siam
Postdoctoral Fellow, Dept. of Civil Engineering, McMaster Univ., 1280 Main St. West, Hamilton, ON, Canada L8S 4L7
1 shared publication- Ahmed Elsayed
Department of Civil Engineering McMaster University Hamilton Ontario Canada
1 shared publication
Latest Publications
- Open Access
GeoFlood Enhancement for Robust Flood Inundation Mapping in Flat Terrain Zones
Flash floods in arid regions dictate a rapid flood inundation mapping for early warning. However, hydrodynamic models, such as HEC-RAS, provide accurate flood mapping but require extensive topographical data and high computational resources. The GeoFlood method offers a rapid alternative for early warning relying on terrain-driven framework and simple hydraulics. This study examined GeoFlood applicability on two arid catchments and tested its sensitivity for different return periods, Manning coefficients, and wadi length segmentations. The original GeoFlood method showed good consistency with HEC-RAS in well-defined wadis but relatively poor performance in flat areas, with segmentation and slope calculation significantly affecting GeoFlood accuracy and robustness. To overcome these limitations, slope calculation was improved using the Theil–Sen trend, and segmentation was automated using the penalized cost approach Continuous Piecewise Optimal Partitioning (CPOP) to detect slope breakpoints. CPOP provides superior and robust performance without prior knowledge of the best segmentation lengths, producing smoother slopes at accurate breakpoints with a Fowlkes–Mallows (FM) index of 0.88 in flat areas and an error bias of 1.05 compared to a variable FM from 0.72 to 0.88 and an error bias from 0.81 to 1.3 for the original GeoFlood. The enhanced GeoFlood provides reliable robust results in arid regions when data are scarce.
Open AccessGeoFlood Enhancement for Robust Flood Inundation Mapping in Flat Terrain Zones
Flash floods in arid regions dictate a rapid flood inundation mapping for early warning. However, hydrodynamic models, such as HEC-RAS, provide accurate flood mapping but require extensive topographical data and high computational resources. The GeoFlood method offers a rapid alternative for early warning relying on terrain-driven framework and simple hydraulics. This study examined GeoFlood applicability on two arid catchments and tested its sensitivity for different return periods, Manning coefficients, and wadi length segmentations. The original GeoFlood method showed good consistency with HEC-RAS in well-defined wadis but relatively poor performance in flat areas, with segmentation and slope calculation significantly affecting GeoFlood accuracy and robustness. To overcome these limitations, slope calculation was improved using the Theil–Sen trend, and segmentation was automated using the penalized cost approach Continuous Piecewise Optimal Partitioning (CPOP) to detect slope breakpoints. CPOP provides superior and robust performance without prior knowledge of the best segmentation lengths, producing smoother slopes at accurate breakpoints with a Fowlkes–Mallows (FM) index of 0.88 in flat areas and an error bias of 1.05 compared to a variable FM from 0.72 to 0.88 and an error bias from 0.81 to 1.3 for the original GeoFlood. The enhanced GeoFlood provides reliable robust results in arid regions when data are scarce.
- Open Access
Analytically Enhanced Random Walk Approach for Rapid Concentration Mapping in Fractured Aquifers
The efficient management and remediation of contaminated fractured aquifers necessitate an accurate prediction of the spatial distribution of contaminant concentration within the system. Related existing analytical solutions are only applicable to single fractures and have not yet been extrapolated to the aquifer scale where a network of connected fractures exists. The Random Walk Particle Tracking (RWPT) method has been extensively adopted for concentration mapping in Discrete Fracture Networks (DFNs), albeit at exorbitant computational costs and without efficiently accommodating complex physical processes (e.g., two-site kinetics). This study introduces an analytically enhanced Spatiotemporal Random Walk (STRW) approach that facilitates the efficient time-dependent mapping of contaminant concentration in DFNs. The STRW approach employs a distribution function to simultaneously estimate the displacement of particles released through the system either instantaneously or over time. The STRW approach efficiently reproduced the contaminant concentration, calculated using available analytical solutions under a range of fate and transport mechanisms. The efficacy of the STRW approach is also confirmed in a synthetic impermeable DFN through replicating the concentration maps produced using the RWPT method. The developed approach represents an accurate and computationally efficient dynamic concentration mapping technique that can support the effective operation, management, and remediation of fractured aquifers under contamination events.
Open AccessAnalytically Enhanced Random Walk Approach for Rapid Concentration Mapping in Fractured Aquifers
The efficient management and remediation of contaminated fractured aquifers necessitate an accurate prediction of the spatial distribution of contaminant concentration within the system. Related existing analytical solutions are only applicable to single fractures and have not yet been extrapolated to the aquifer scale where a network of connected fractures exists. The Random Walk Particle Tracking (RWPT) method has been extensively adopted for concentration mapping in Discrete Fracture Networks (DFNs), albeit at exorbitant computational costs and without efficiently accommodating complex physical processes (e.g., two-site kinetics). This study introduces an analytically enhanced Spatiotemporal Random Walk (STRW) approach that facilitates the efficient time-dependent mapping of contaminant concentration in DFNs. The STRW approach employs a distribution function to simultaneously estimate the displacement of particles released through the system either instantaneously or over time. The STRW approach efficiently reproduced the contaminant concentration, calculated using available analytical solutions under a range of fate and transport mechanisms. The efficacy of the STRW approach is also confirmed in a synthetic impermeable DFN through replicating the concentration maps produced using the RWPT method. The developed approach represents an accurate and computationally efficient dynamic concentration mapping technique that can support the effective operation, management, and remediation of fractured aquifers under contamination events.
- Open Access
- 14 March 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 356, 120510
Genetic programming expressions for effluent quality prediction: Towards AI-driven monitoring and management of wastewater treatment plants
- 14 March 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 356, 120510
Open AccessGenetic programming expressions for effluent quality prediction: Towards AI-driven monitoring and management of wastewater treatment plants
- Open Access
- 3 February 2024
- Published by Elsevier in Journal of Hydrology
- Vol. 631, 130817
Deep learning rapid flood risk predictions for climate resilience planning
- 3 February 2024
- Published by Elsevier in Journal of Hydrology
- Vol. 631, 130817
Open AccessDeep learning rapid flood risk predictions for climate resilience planning
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Uncertainty Quantification in Hydrological and Environmental Modeling based on Polynomial Chaos Expansion
There are significant uncertainties associated with the estimates of model parameters in hydrological and environmental modeling. Such uncertainties could propagate within a modeling framework, leading to considerable deviation of the predicted value from its real value. Quantifying the uncertainties associated with model parameters could be computationally exhaustive and is still a daunting challenge to hydrological and environmental engineers. In this study, a series of Polynomial Chaos Expansion (PCE) methods, which have a significant advantage in computational efficiency, is developed to assess the propagation of parameter uncertainty. The proposed approaches were applied to two hydrological/environmental modeling case studies. The uncertainty quantification results will be compared with those from the traditional Monte Carlo simulation technique, to demonstrate the effectiveness and efficiency of the proposed approaches. This work will provide an efficient and reliable alternative to assess the impacts of the parameter uncertainties in hydrological and environmental modeling.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessUncertainty Quantification in Hydrological and Environmental Modeling based on Polynomial Chaos Expansion
There are significant uncertainties associated with the estimates of model parameters in hydrological and environmental modeling. Such uncertainties could propagate within a modeling framework, leading to considerable deviation of the predicted value from its real value. Quantifying the uncertainties associated with model parameters could be computationally exhaustive and is still a daunting challenge to hydrological and environmental engineers. In this study, a series of Polynomial Chaos Expansion (PCE) methods, which have a significant advantage in computational efficiency, is developed to assess the propagation of parameter uncertainty. The proposed approaches were applied to two hydrological/environmental modeling case studies. The uncertainty quantification results will be compared with those from the traditional Monte Carlo simulation technique, to demonstrate the effectiveness and efficiency of the proposed approaches. This work will provide an efficient and reliable alternative to assess the impacts of the parameter uncertainties in hydrological and environmental modeling.
- Open Access
Synchronization-Enhanced Deep Learning Early Flood Risk Predictions: The Core of Data-Driven City Digital Twins for Climate Resilience Planning
Floods have been among the costliest hydrometeorological hazards across the globe for decades, and are expected to become even more frequent and cause larger devastating impacts in cities due to climate change. Digital twin technologies can provide decisionmakers with effective tools to rapidly evaluate city resilience under projected floods. However, the development of city digital twins for flood predictions is challenging due to the time-consuming, uncertain processes of developing, calibrating, and coupling physics-based hydrologic and hydraulic models. In this study, a flood prediction methodology (FPM) that integrates synchronization analysis and deep-learning is developed to directly simulate the complex relationships between rainfall and flood characteristics, bypassing the computationally expensive hydrologic-hydraulic models, with the City of Calgary being used for demonstration. The developed FPM presents the core of data-driven digital twins that, with real-time sensor data, can rapidly provide early warnings before flood realization, as well as information about vulnerable areas—enabling city resilience planning considering different climate change scenarios.
Open AccessSynchronization-Enhanced Deep Learning Early Flood Risk Predictions: The Core of Data-Driven City Digital Twins for Climate Resilience Planning
Floods have been among the costliest hydrometeorological hazards across the globe for decades, and are expected to become even more frequent and cause larger devastating impacts in cities due to climate change. Digital twin technologies can provide decisionmakers with effective tools to rapidly evaluate city resilience under projected floods. However, the development of city digital twins for flood predictions is challenging due to the time-consuming, uncertain processes of developing, calibrating, and coupling physics-based hydrologic and hydraulic models. In this study, a flood prediction methodology (FPM) that integrates synchronization analysis and deep-learning is developed to directly simulate the complex relationships between rainfall and flood characteristics, bypassing the computationally expensive hydrologic-hydraulic models, with the City of Calgary being used for demonstration. The developed FPM presents the core of data-driven digital twins that, with real-time sensor data, can rapidly provide early warnings before flood realization, as well as information about vulnerable areas—enabling city resilience planning considering different climate change scenarios.
- 3 June 2022
- Published by Springer Nature
- p. 577-588
Digital Twin: A City-Scale Flood Imitation Framework
- 3 June 2022
- Published by Springer Nature
- p. 577-588
Digital Twin: A City-Scale Flood Imitation Framework
- Open Access
- 18 August 2021
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 57 (8)
Uncertainty Analysis for Hydrological Models With Interdependent Parameters: An Improved Polynomial Chaos Expansion Approach
The use of polynomial chaos expansion (PCE) has gained a lot of attention due to its ability to efficiently estimate the effects of parameter uncertainty on model outputs. The traditional PCE technique requires the studied parameters to be independent. In hydrological modeling, although model parameters are often assumed to be independent for simplicity of computation, such an assumption is not always valid. Neglecting parameter correlations could significantly affect the analysis of uncertainty, leading to distorted modeling results. In this study, an improved PCE approach is proposed to address this issue and support the uncertainty analysis for hydrological models with correlated parameters. The proposed approach is based on the integration of principle component analysis (PCA) and PCE, where PCA is used to transform correlated parameters into orthogonal independent components. To demonstrate the applicability of this approach, the Soil & Water Assessment Tool (SWAT) model is applied to the Guadalupe River Watershed in Texas, US, and the integrated PCA‐PCE framework is used to assess the propagation of uncertainty of SWAT's interdependent parameters. A traditional Monte‐Carlo (MC) simulation is also used to address the uncertainty in the developed SWAT model. The results show that PCA‐PCE could generate similar probabilistic flow results compared to MC while maintaining a very high computational efficiency. The coefficients of determination (R2) for the mean and variance are 0.998 and 0.973, respectively, and the computational requirement is reduced by 99% using the developed PCA‐PCE approach. It is shown that the PCA‐PCE approach is reliable and efficient in assessing uncertainties in hydrological models with interdependent parameters.
- 18 August 2021
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 57 (8)
Open AccessUncertainty Analysis for Hydrological Models With Interdependent Parameters: An Improved Polynomial Chaos Expansion Approach
The use of polynomial chaos expansion (PCE) has gained a lot of attention due to its ability to efficiently estimate the effects of parameter uncertainty on model outputs. The traditional PCE technique requires the studied parameters to be independent. In hydrological modeling, although model parameters are often assumed to be independent for simplicity of computation, such an assumption is not always valid. Neglecting parameter correlations could significantly affect the analysis of uncertainty, leading to distorted modeling results. In this study, an improved PCE approach is proposed to address this issue and support the uncertainty analysis for hydrological models with correlated parameters. The proposed approach is based on the integration of principle component analysis (PCA) and PCE, where PCA is used to transform correlated parameters into orthogonal independent components. To demonstrate the applicability of this approach, the Soil & Water Assessment Tool (SWAT) model is applied to the Guadalupe River Watershed in Texas, US, and the integrated PCA‐PCE framework is used to assess the propagation of uncertainty of SWAT's interdependent parameters. A traditional Monte‐Carlo (MC) simulation is also used to address the uncertainty in the developed SWAT model. The results show that PCA‐PCE could generate similar probabilistic flow results compared to MC while maintaining a very high computational efficiency. The coefficients of determination (R2) for the mean and variance are 0.998 and 0.973, respectively, and the computational requirement is reduced by 99% using the developed PCA‐PCE approach. It is shown that the PCA‐PCE approach is reliable and efficient in assessing uncertainties in hydrological models with interdependent parameters.
- 1 February 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 25 (2)
Hybrid Hydrological Data-Driven Approach for Daily Streamflow Forecasting
Hydrological forecasting is key for water resources allocation and flood risk management. Although a number of advanced hydrological forecasting methods have been developed in the past, daily (or subdaily) forecasting remains a major challenge in engineering hydrology. The uncertainties associated with input data, model parameters, and model structure necessitate developing more robust modeling techniques. In this study, a hybrid machine-learning approach based on hydrological and data-driven modeling is developed for daily streamflow forecasting. The proposed hybrid hydrological data-driven model (HHDD) approach succeeds in improving daily prediction compared to that predicted by the standard conceptual hydrological model (HYMOD). In addition, the developed HHDD model is more robust in terms of providing direct uncertainty analysis results. The results indicate that a better resemblance of streamflow pattern is achieved by integrating physically based and data-driven approaches into the developed HHDD model.
- 1 February 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 25 (2)
Hybrid Hydrological Data-Driven Approach for Daily Streamflow Forecasting
Hydrological forecasting is key for water resources allocation and flood risk management. Although a number of advanced hydrological forecasting methods have been developed in the past, daily (or subdaily) forecasting remains a major challenge in engineering hydrology. The uncertainties associated with input data, model parameters, and model structure necessitate developing more robust modeling techniques. In this study, a hybrid machine-learning approach based on hydrological and data-driven modeling is developed for daily streamflow forecasting. The proposed hybrid hydrological data-driven model (HHDD) approach succeeds in improving daily prediction compared to that predicted by the standard conceptual hydrological model (HYMOD). In addition, the developed HHDD model is more robust in terms of providing direct uncertainty analysis results. The results indicate that a better resemblance of streamflow pattern is achieved by integrating physically based and data-driven approaches into the developed HHDD model.