Pavel Anistratov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pavel Anistratov has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Björn Olofsson
Department of Automatic Control, Lund University, Lund, Sweden
3 shared publications - Lars Nielsen
Linköping University
3 shared publications Björn Olofsson
Division of Vehicular Systems, Department of Electrical Engineering, Linköping University, Sweden
1 shared publicationLars Nielsen
Division of Vehicular Systems, Department of Electrical Engineering, Linköping University, Sweden
1 shared publication- Oleg Burdakov
Linköping University, Linköping, Sweden
1 shared publication - Victor Fors
Division of Vehicular Systems, Department of Electrical Engineering, Linkping University, Linkping, Sweden
1 shared publication
Latest Publications
- Open Access
- 22 October 2021
- Published by Linkoping University Electronic Press
Autonomous Avoidance Maneuvers for Vehicles using Optimization
To allow future autonomous passenger vehicles to be used in the same driving situations and conditions as ordinary vehicles are used by human drivers today, the control systems must be able to perf ...
- 22 October 2021
- Published by Linkoping University Electronic Press
Open AccessAutonomous Avoidance Maneuvers for Vehicles using Optimization
To allow future autonomous passenger vehicles to be used in the same driving situations and conditions as ordinary vehicles are used by human drivers today, the control systems must be able to perf ...
- 9 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 235 (12) , 3036-3050
Lane-deviation penalty formulation and analysis for autonomous vehicle avoidance maneuvers
Autonomous vehicles hold promise for increased vehicle and traffic safety, and there are several developments in the field where one example is an avoidance maneuver. There it is dangerous for the vehicle to be in the opposing lane, but it is safe to drive in the original lane again after the obstacle. To capture this basic observation, a lane-deviation penalty (LDP) objective function is devised. Based on this objective function, a formulation is developed utilizing optimal all-wheel braking and steering at the limit of road–tire friction. This method is evaluated for a double lane-change scenario by computing the resulting behavior for several interesting cases, where parameters of the emergency situation such as the initial speed of the vehicle and the size and placement of the obstacle are varied, and it performs well. A comparison with maneuvers obtained by minimum-time and other lateral-penalty objective functions shows that the use of the considered penalty function decreases the time that the vehicle spends in the opposing lane.
- 9 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 235 (12) , 3036-3050
Lane-deviation penalty formulation and analysis for autonomous vehicle avoidance maneuvers
Autonomous vehicles hold promise for increased vehicle and traffic safety, and there are several developments in the field where one example is an avoidance maneuver. There it is dangerous for the vehicle to be in the opposing lane, but it is safe to drive in the original lane again after the obstacle. To capture this basic observation, a lane-deviation penalty (LDP) objective function is devised. Based on this objective function, a formulation is developed utilizing optimal all-wheel braking and steering at the limit of road–tire friction. This method is evaluated for a double lane-change scenario by computing the resulting behavior for several interesting cases, where parameters of the emergency situation such as the initial speed of the vehicle and the size and placement of the obstacle are varied, and it performs well. A comparison with maneuvers obtained by minimum-time and other lateral-penalty objective functions shows that the use of the considered penalty function decreases the time that the vehicle spends in the opposing lane.
- 1 April 2021
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 143 (8)
Predictive Force-Centric Emergency Collision Avoidance
A controller for critical vehicle maneuvering is proposed that avoids obstacles and keeps the vehicle on the road while achieving heavy braking. It operates at the limit of friction and is structured in two main steps: a motion-planning step based on receding-horizon planning to obtain acceleration-vector references, and a low-level controller for following these acceleration references and transforming them into actuator commands. The controller is evaluated in a number of challenging scenarios and results in a well behaved vehicle with respect to, e.g., the steering angle, the body slip, and the path. It is also demonstrated that the controller successfully balances braking and avoidance such that it really takes advantage of the braking possibilities. Specifically, for a moving obstacle, it makes use of a widening gap to perform more braking, which is a clear advantage of the online replanning capability if the obstacle should be a moving human or animal. Finally, real-time capabilities are demonstrated. In conclusion, the controller performs well, both from a functional perspective and from a real-time perspective.
- 1 April 2021
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 143 (8)
Predictive Force-Centric Emergency Collision Avoidance
A controller for critical vehicle maneuvering is proposed that avoids obstacles and keeps the vehicle on the road while achieving heavy braking. It operates at the limit of friction and is structured in two main steps: a motion-planning step based on receding-horizon planning to obtain acceleration-vector references, and a low-level controller for following these acceleration references and transforming them into actuator commands. The controller is evaluated in a number of challenging scenarios and results in a well behaved vehicle with respect to, e.g., the steering angle, the body slip, and the path. It is also demonstrated that the controller successfully balances braking and avoidance such that it really takes advantage of the braking possibilities. Specifically, for a moving obstacle, it makes use of a widening gap to perform more braking, which is a clear advantage of the online replanning capability if the obstacle should be a moving human or animal. Finally, real-time capabilities are demonstrated. In conclusion, the controller performs well, both from a functional perspective and from a real-time perspective.
- Open Access
- 31 March 2021
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 60 (7) , 2231-2254
Analysis and design of recovery behaviour of autonomous-vehicle avoidance manoeuvres
Autonomous vehicles allow utilisation of new optimal driving approaches that increase vehicle safety by combining optimal all-wheel braking and steering even at the limit of tyre–road friction. One important case is an avoidance manoeuvre that, in previous research, for example, has been approached by different optimisation formulations. An avoidance manoeuvre is typically composed of an evasive phase avoiding an obstacle followed by a recovery phase where the vehicle returns to normal driving. Here, an analysis of the different aspects of the recovery phase is presented, and a subsequent formulation is developed in several steps based on theory and simulation of a double lane-change scenario. Each step leads to an extension of the optimisation criterion. Two key results are a theoretical redundancy analysis of wheel-torque distribution and the subsequent handling of it. The overall contribution is a general treatment of the recovery phase in an optimisation framework, and the method is successfully demonstrated for three different formulations: lane-deviation penalty, minimum time, and squared lateral-error norm.
- 31 March 2021
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 60 (7) , 2231-2254
Open AccessAnalysis and design of recovery behaviour of autonomous-vehicle avoidance manoeuvres
Autonomous vehicles allow utilisation of new optimal driving approaches that increase vehicle safety by combining optimal all-wheel braking and steering even at the limit of tyre–road friction. One important case is an avoidance manoeuvre that, in previous research, for example, has been approached by different optimisation formulations. An avoidance manoeuvre is typically composed of an evasive phase avoiding an obstacle followed by a recovery phase where the vehicle returns to normal driving. Here, an analysis of the different aspects of the recovery phase is presented, and a subsequent formulation is developed in several steps based on theory and simulation of a double lane-change scenario. Each step leads to an extension of the optimisation criterion. Two key results are a theoretical redundancy analysis of wheel-torque distribution and the subsequent handling of it. The overall contribution is a general treatment of the recovery phase in an optimisation framework, and the method is successfully demonstrated for three different formulations: lane-deviation penalty, minimum time, and squared lateral-error norm.
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 15558-15565
Autonomous-Vehicle Maneuver Planning Using Segmentation and the Alternating Augmented Lagrangian Method
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 15558-15565
Autonomous-Vehicle Maneuver Planning Using Segmentation and the Alternating Augmented Lagrangian Method
- Open Access
- 12 December 2019
- Published by Linkoping University Electronic Press
Computation of Autonomous Safety Maneuvers Using Segmentation and Optimization
This thesis studies motion planning for future autonomous vehicles with main focus on passenger cars. By having automatic steering and braking together with information about the environment, such ...
- 12 December 2019
- Published by Linkoping University Electronic Press
Open AccessComputation of Autonomous Safety Maneuvers Using Segmentation and Optimization
This thesis studies motion planning for future autonomous vehicles with main focus on passenger cars. By having automatic steering and braking together with information about the environment, such ...