Akhilesh Pandey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Akhilesh Pandey has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Sandeep Dalal
Solid State Physics Laboratory, Delhi, India
9 shared publicationsShankar Dutta
Solid State Physics Laboratory, DRDO, Timarpur, Delhi, India
9 shared publicationsR. Raman
Solid State Physics Laboratory, DRDO, Timarpur, India
8 shared publicationsDavinder Kaur
Department of Physics, Indian Institute of Technology Roorkee, Roorkee, India
5 shared publicationsAmbesh Dixit
Indian Institute of Technology Jodhpur
3 shared publications- Davinder Kaur
Indian Institute of Technology Roorkee
3 shared publications
Latest Publications
- 1 April 2026
- Published by Springer Nature
- p. 113-133
Nanomaterials in Defence and Military Industry: Innovations for Enhanced Security and Operational Efficiency
- 1 April 2026
- Published by Springer Nature
- p. 113-133
Nanomaterials in Defence and Military Industry: Innovations for Enhanced Security and Operational Efficiency
- 13 January 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (2) , 94
Phonon-coupled-IR photon correlation with crystal orientation of tungsten-oxide layers for mid-IR sensing applications
- 13 January 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (2) , 94
Phonon-coupled-IR photon correlation with crystal orientation of tungsten-oxide layers for mid-IR sensing applications
- 22 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (5)
Optoelectronic characteristics of epitaxial GaN layers grown on SiC and sapphire substrates for UV photodetection applications
This paper discusses the optoelectronic characteristics of the GaN epitaxial layer (2µm thick) grown on 4H SiC and sapphire substrates by metal-organic-vapor phase epitaxy (MOVPE) technique for the UV photodetection applications. The structural and morphological characterization of the epi-layers showed better crystalline quality of the GaN/ SiC sample (S2) compared to the GaN/ sapphire sample (S1). Concentric inter-digitated terminals are fabricated on the GaN epilayers to create metal-semiconductor-metal (MSM) photodetector (PD) structures. Both the MSM PDs exhibited low dark current (10-10 A) with a high photo-to-dark current ratio (103) indicating their excellent UV photodetection ability. The effect of applied bias on the photodetection properties of the MSM PDs is studied. At 50 V bias (Electric field: 12.5 kV/ cm), the responsivity of the samples is found to be 12 A/ W (S1) and 18 A/ W (S2) under the UV illumination of (254 nm, 0.5 mW/ cm2). The photocurrent (linked with the responsivity) in the PDs rises with the biasing voltage (60-100 V) due to the higher drift velocity. At 50 V bias, the sample S1 exhibited 1.5 times higher detectivity than the S2 sample, which subsequently rises to 2 times at 100 V bias. They showed substantial small noise equivalent power (~10-16 W/ Hz1/2) indicating a very high sensitivity, high precision, and minimal noise during the UV photodetection. At 50 V, the PDs exhibited high external quantum efficiency values (S1: 59x102 %, S2: 89 x102 %) due to the photoconductive gain (in the MSM structures) greater than unity.
- 22 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (5)
Optoelectronic characteristics of epitaxial GaN layers grown on SiC and sapphire substrates for UV photodetection applications
This paper discusses the optoelectronic characteristics of the GaN epitaxial layer (2µm thick) grown on 4H SiC and sapphire substrates by metal-organic-vapor phase epitaxy (MOVPE) technique for the UV photodetection applications. The structural and morphological characterization of the epi-layers showed better crystalline quality of the GaN/ SiC sample (S2) compared to the GaN/ sapphire sample (S1). Concentric inter-digitated terminals are fabricated on the GaN epilayers to create metal-semiconductor-metal (MSM) photodetector (PD) structures. Both the MSM PDs exhibited low dark current (10-10 A) with a high photo-to-dark current ratio (103) indicating their excellent UV photodetection ability. The effect of applied bias on the photodetection properties of the MSM PDs is studied. At 50 V bias (Electric field: 12.5 kV/ cm), the responsivity of the samples is found to be 12 A/ W (S1) and 18 A/ W (S2) under the UV illumination of (254 nm, 0.5 mW/ cm2). The photocurrent (linked with the responsivity) in the PDs rises with the biasing voltage (60-100 V) due to the higher drift velocity. At 50 V bias, the sample S1 exhibited 1.5 times higher detectivity than the S2 sample, which subsequently rises to 2 times at 100 V bias. They showed substantial small noise equivalent power (~10-16 W/ Hz1/2) indicating a very high sensitivity, high precision, and minimal noise during the UV photodetection. At 50 V, the PDs exhibited high external quantum efficiency values (S1: 59x102 %, S2: 89 x102 %) due to the photoconductive gain (in the MSM structures) greater than unity.
- 24 June 2025
- Published by Elsevier in Optical Materials
- Vol. 167
Transient response of low-temperature ALD-grown ZnO thin film-based p–i–n UV photodetector
- 24 June 2025
- Published by Elsevier in Optical Materials
- Vol. 167
Transient response of low-temperature ALD-grown ZnO thin film-based p–i–n UV photodetector
- 31 May 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (16) , 1-15
Structural and spectroscopic properties of nitrogen ion-implanted GaN epitaxial layers
- 31 May 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (16) , 1-15
Structural and spectroscopic properties of nitrogen ion-implanted GaN epitaxial layers
- Open Access
- 24 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Investigation of surface and interface phonon polariton in nitrogen-implanted GaN epi-layers
In recent decades, gallium nitride (GaN) has garnered significant attention from researchers due to its diverse applications in microelectronics and optoelectronic devices. In this manuscript, using infrared attenuated total reflectance (IR-ATR) spectroscopy, the surface phonon polariton (SPP) and interface phonon polariton modes of unimplanted, N+-ion-implanted, and post-annealed GaN epitaxial layers have been investigated and analyzed at various doses experimentally and theoretically. The position of the SPP mode and its broadening as the increase in implantation doses and post-annealing treatment in the GaN samples are discussed. Shifting in the SPP absorption dip from (698.3–692.7 cm−1) for the unimplanted to implanted dose is correlated with damping factor (ranging from 10 to 80 cm−1) using theoretical reflectance by the model based on damped oscillations between the Ga and N atoms. Unimplanted, implanted, and post-annealed GaN samples Raman spectroscopy and optical absorption have been employed to extract the optical parameters. Optical parameters extracted from Raman spectroscopy and UV–visible spectroscopy such as tensile strain, phonon lifetime, and band-edge absorption have been correlated with the position and broadening of the SPP, as well as the damping factor on unimplanted, N+ ion-implanted, and post-annealed GaN specimens. Notably, the experimental IR-ATR data showed strong agreement with the theoretically modeled results.
- 24 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Open AccessInvestigation of surface and interface phonon polariton in nitrogen-implanted GaN epi-layers
In recent decades, gallium nitride (GaN) has garnered significant attention from researchers due to its diverse applications in microelectronics and optoelectronic devices. In this manuscript, using infrared attenuated total reflectance (IR-ATR) spectroscopy, the surface phonon polariton (SPP) and interface phonon polariton modes of unimplanted, N+-ion-implanted, and post-annealed GaN epitaxial layers have been investigated and analyzed at various doses experimentally and theoretically. The position of the SPP mode and its broadening as the increase in implantation doses and post-annealing treatment in the GaN samples are discussed. Shifting in the SPP absorption dip from (698.3–692.7 cm−1) for the unimplanted to implanted dose is correlated with damping factor (ranging from 10 to 80 cm−1) using theoretical reflectance by the model based on damped oscillations between the Ga and N atoms. Unimplanted, implanted, and post-annealed GaN samples Raman spectroscopy and optical absorption have been employed to extract the optical parameters. Optical parameters extracted from Raman spectroscopy and UV–visible spectroscopy such as tensile strain, phonon lifetime, and band-edge absorption have been correlated with the position and broadening of the SPP, as well as the damping factor on unimplanted, N+ ion-implanted, and post-annealed GaN specimens. Notably, the experimental IR-ATR data showed strong agreement with the theoretically modeled results.
- 13 February 2025
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 704
Investigation of structural and electrical characteristics of sputtered multiphase tungsten-oxide thin films for sensor applications
- 13 February 2025
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 704
Investigation of structural and electrical characteristics of sputtered multiphase tungsten-oxide thin films for sensor applications
- 9 October 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (15)
Functionality in frequency tuning of magnetoelectric heterostructure integrated highly flexible bulk acoustic wave resonator
Functional flexible piezo-resonators are of vital interest for designing micro-electrometrical system (MEMS) based high-frequency wearable devices. The magnetoelectric (ME) heterostructure comprising highly magnetostrictive Ni–Mn–In and piezoelectric AlN films was fabricated over flexible substrates to develop the bulk acoustic wave (BAW) resonator. The BAW resonators fabricated over Ni and Kapton substrates show the fundamental resonance at ∼5.535 and 5.400 GHz, respectively. The comparative study of frequency tuning for both resonators has been executed in the presence of a dc magnetic field. A larger frequency shift (ΔfR) of ∼540 MHz was detected at 1200 Oe for a device fabricated over Ni with a sensitivity of ∼5.4 Hz/nT. However, it is 360 MHz in the case of Kapton, with a sensitivity of ∼3.0 Hz/nT. Moreover, the BAW resonator over the magnetostrictive Ni substrate shows a higher tunability of ∼11.4% compared to ∼8.5% for the resonator fabricated over non-magnetostrictive Kapton. The equivalent modified Butterworth–Van Dyke circuit parameters have been extracted by fitting the experimental data with and without an external magnetic field using advanced design system. The effect of an external magnetic field has been thoroughly investigated on device parameters, such as electromechanical coupling coefficient (K2), acoustic velocity, quality factor (Q), and figure of merit. The anisotropic functionality of the fabricated resonator has been studied by measuring the tunability of the resonator in parallel and perpendicular magnetic fields. The present study motivates the incorporation of flexible magnetostrictive substrates for futuristic multifunctional MEMS magnetic field sensor applications.
- 9 October 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (15)
Functionality in frequency tuning of magnetoelectric heterostructure integrated highly flexible bulk acoustic wave resonator
Functional flexible piezo-resonators are of vital interest for designing micro-electrometrical system (MEMS) based high-frequency wearable devices. The magnetoelectric (ME) heterostructure comprising highly magnetostrictive Ni–Mn–In and piezoelectric AlN films was fabricated over flexible substrates to develop the bulk acoustic wave (BAW) resonator. The BAW resonators fabricated over Ni and Kapton substrates show the fundamental resonance at ∼5.535 and 5.400 GHz, respectively. The comparative study of frequency tuning for both resonators has been executed in the presence of a dc magnetic field. A larger frequency shift (ΔfR) of ∼540 MHz was detected at 1200 Oe for a device fabricated over Ni with a sensitivity of ∼5.4 Hz/nT. However, it is 360 MHz in the case of Kapton, with a sensitivity of ∼3.0 Hz/nT. Moreover, the BAW resonator over the magnetostrictive Ni substrate shows a higher tunability of ∼11.4% compared to ∼8.5% for the resonator fabricated over non-magnetostrictive Kapton. The equivalent modified Butterworth–Van Dyke circuit parameters have been extracted by fitting the experimental data with and without an external magnetic field using advanced design system. The effect of an external magnetic field has been thoroughly investigated on device parameters, such as electromechanical coupling coefficient (K2), acoustic velocity, quality factor (Q), and figure of merit. The anisotropic functionality of the fabricated resonator has been studied by measuring the tunability of the resonator in parallel and perpendicular magnetic fields. The present study motivates the incorporation of flexible magnetostrictive substrates for futuristic multifunctional MEMS magnetic field sensor applications.
- 7 September 2023
- Published by Springer Nature in Applied Physics A
- Vol. 129 (10) , 1-9
H+ ion implantation-induced effect investigations in a-plane GaN layer on r-plane sapphire
- 7 September 2023
- Published by Springer Nature in Applied Physics A
- Vol. 129 (10) , 1-9
H+ ion implantation-induced effect investigations in a-plane GaN layer on r-plane sapphire
- 23 March 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (9) , 1-10
X-ray Pole figure analysis for orienting TGSM grown bulk ZnTe crystal for Terahertz device applications
- 23 March 2023
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 34 (9) , 1-10
X-ray Pole figure analysis for orienting TGSM grown bulk ZnTe crystal for Terahertz device applications