Alex Kootsookos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Alex Kootsookos has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Firoz Alam
School of Engineering (Aerospace, Mechanical and Manufacturing), RMIT University, Melbourne, VIC 3000, Australia
6 shared publications - Harun Chowdhury
RMIT University
4 shared publications Amir Mahyar Khorasani
Faculty of High Technology and Engineering, Iran University of Industries and Mines, 578-Hafez Street, Karimkhan Blv., Tehran, Iran
3 shared publicationsA.P. Mouritz
2 shared publicationsAbdulaziz Aldiab
2 shared publications- Chi-Tsun Cheng
Mechanical, Manufacturing and Mechatronic Engineering Department, School of Engineering, STEM College, RMIT University, Melbourne, VIC 3000, Australia
2 shared publications
Latest Publications
- Open Access
- 16 October 2026
- Published by Elsevier in SSRN Electronic Journal
Cognitive Reappraisal Within the Emotion-Regulation Process in Complex Engineering Management Decisions: A Qualitative Study
How engineering managers regulate emotion during complex decisions remains underexamined. This qualitative study of 20 engineering management professionals examines how cognitive reappraisal operates within a broader emotion-regulation sequence. Using Gross’s process model, reflexive thematic analysis of structured interviews identified four stages: situation evaluation (13 of 20 participants), attentional deployment (10), cognitive reappraisal (15) and response modulation (14). Participant-level co-occurrence did not depart from chance, so the stages are best read as an interconnected set, not a strict sequence. Reappraisal formed one part of a wider regulatory repertoire. The findings extend emotion-regulation theory into engineering management.
- 16 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCognitive Reappraisal Within the Emotion-Regulation Process in Complex Engineering Management Decisions: A Qualitative Study
How engineering managers regulate emotion during complex decisions remains underexamined. This qualitative study of 20 engineering management professionals examines how cognitive reappraisal operates within a broader emotion-regulation sequence. Using Gross’s process model, reflexive thematic analysis of structured interviews identified four stages: situation evaluation (13 of 20 participants), attentional deployment (10), cognitive reappraisal (15) and response modulation (14). Participant-level co-occurrence did not depart from chance, so the stages are best read as an interconnected set, not a strict sequence. Reappraisal formed one part of a wider regulatory repertoire. The findings extend emotion-regulation theory into engineering management.
- Open Access
- 6 May 2026
- Published by Open Access Publishing Association in Intelligent Technologies in Education
- Vol. 1 (1)
Artificial intelligence in higher education learning: transferable skills and academic integrity
The advancement of Generative Artificial Intelligence (AI) chatbots, such as ChatGPT, presents significant and transformative challenges in higher education teaching and learning, such as assessment and evaluation practices. While this is acknowledged, there has been very little research into what this might look like in daily practice in higher education. This study explored these challenges in one area of higher education practice: developing students’ transferable skills, including writing, critical thinking, and information literacy among undergraduate engineering students at RMIT University, Melbourne, Australia. Using a cohort comparison design, this study evaluated the impact of ChatGPT on students' attainment of transferable skills. The effectiveness of AI tools in enhancing educational outcomes was assessed with a standardised assessment framework used by independent assessors to grade students’ reports. The results, analysed using the Mann-Whitney U test and the intraclass correlation coefficient, revealed significant improvements in critical thinking and information literacy among those students who used ChatGPT. The study also explored the ethical implications of using AI in educational settings and highlighted the need for rigorous academic standards and the implementation of measures to ensure the responsible use of AI technologies. While the preliminary findings suggest that AI tools, particularly ChatGPT in this study, can positively impact certain students’ skills, more detailed and controlled studies are necessary to validate these results and explore further the mechanisms through which AI tools influence learning and skill development.
- 6 May 2026
- Published by Open Access Publishing Association in Intelligent Technologies in Education
- Vol. 1 (1)
Open AccessArtificial intelligence in higher education learning: transferable skills and academic integrity
The advancement of Generative Artificial Intelligence (AI) chatbots, such as ChatGPT, presents significant and transformative challenges in higher education teaching and learning, such as assessment and evaluation practices. While this is acknowledged, there has been very little research into what this might look like in daily practice in higher education. This study explored these challenges in one area of higher education practice: developing students’ transferable skills, including writing, critical thinking, and information literacy among undergraduate engineering students at RMIT University, Melbourne, Australia. Using a cohort comparison design, this study evaluated the impact of ChatGPT on students' attainment of transferable skills. The effectiveness of AI tools in enhancing educational outcomes was assessed with a standardised assessment framework used by independent assessors to grade students’ reports. The results, analysed using the Mann-Whitney U test and the intraclass correlation coefficient, revealed significant improvements in critical thinking and information literacy among those students who used ChatGPT. The study also explored the ethical implications of using AI in educational settings and highlighted the need for rigorous academic standards and the implementation of measures to ensure the responsible use of AI technologies. While the preliminary findings suggest that AI tools, particularly ChatGPT in this study, can positively impact certain students’ skills, more detailed and controlled studies are necessary to validate these results and explore further the mechanisms through which AI tools influence learning and skill development.
- Open Access
- 5 September 2024
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 18 (5) , 702-711
Development of a Compression Test Method for Badminton Shuttlecock Feathers
The current badminton shuttlecock products are highly ineffective. The bird feather shuttlecocks used in official competitions have an unsustainably high change count due to rapid breakage from repeated racquet strikes. Meanwhile, the current synthetic shuttlecocks lack the structural properties of their feather counterparts to produce the desired aerodynamics as a projectile. This study discusses two material testing methods: the feather compression and hysteresis test, which can provide relevant mechanical data to be incorporated into the manufacturing process of future synthetic shuttlecocks. The compressive moduli from six feather shuttlecock products (four goose and two duck) were compared using the proposed methods at the strain rate of 1.15 mm/60 s. Subsequently, a three-cycle hysteresis test was conducted at an increasing strain rate of 1.15 mm/120 s, 1.15 mm/80 s, and 1.15 mm/60 s. The compression results were comparable to those from previous studies; however, there are currently no hysteresis data of shuttlecock feathers were available for comparison. The proposed methods have the potential to provide vital mechanical data that should be taken into account for future synthetic shuttlecock designs.
- 5 September 2024
- Published by Fuji Technology Press Ltd. in International Journal of Automation Technology
- Vol. 18 (5) , 702-711
Open AccessDevelopment of a Compression Test Method for Badminton Shuttlecock Feathers
The current badminton shuttlecock products are highly ineffective. The bird feather shuttlecocks used in official competitions have an unsustainably high change count due to rapid breakage from repeated racquet strikes. Meanwhile, the current synthetic shuttlecocks lack the structural properties of their feather counterparts to produce the desired aerodynamics as a projectile. This study discusses two material testing methods: the feather compression and hysteresis test, which can provide relevant mechanical data to be incorporated into the manufacturing process of future synthetic shuttlecocks. The compressive moduli from six feather shuttlecock products (four goose and two duck) were compared using the proposed methods at the strain rate of 1.15 mm/60 s. Subsequently, a three-cycle hysteresis test was conducted at an increasing strain rate of 1.15 mm/120 s, 1.15 mm/80 s, and 1.15 mm/60 s. The compression results were comparable to those from previous studies; however, there are currently no hysteresis data of shuttlecock feathers were available for comparison. The proposed methods have the potential to provide vital mechanical data that should be taken into account for future synthetic shuttlecock designs.
- 1 February 2020
- Published by Elsevier in Acta Astronautica
- Vol. 167, 351-359
Towards space science education: A study of students’ perceptions of the role and value of a space science program
- 1 February 2020
- Published by Elsevier in Acta Astronautica
- Vol. 167, 351-359
Towards space science education: A study of students’ perceptions of the role and value of a space science program
- Top Cited PapersOpen Access
- 1 February 2019
- Published by Elsevier in Energy Procedia
- Vol. 160, 731-737
Utilization of Learning Management Systems (LMSs) in higher education system: A case review for Saudi Arabia
- 1 February 2019
- Published by Elsevier in Energy Procedia
- Vol. 160, 731-737
Top Cited PapersOpen AccessUtilization of Learning Management Systems (LMSs) in higher education system: A case review for Saudi Arabia
- Open Access
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 110, 574-580
Prospect of eLearning in Higher Education Sectors of Saudi Arabia: A Review
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 110, 574-580
Open AccessProspect of eLearning in Higher Education Sectors of Saudi Arabia: A Review
- Open Access
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 110, 537-542
Offshore Engineering Education: Assuring Quality Through Dual Accreditation
- 1 March 2017
- Published by Elsevier in Energy Procedia
- Vol. 110, 537-542
Open AccessOffshore Engineering Education: Assuring Quality Through Dual Accreditation
- Open Access
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 105, 852-857
Scoping e-Portfolios to Engineering and ICT Education
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 105, 852-857
Open AccessScoping e-Portfolios to Engineering and ICT Education
- 20 June 2013
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modeling, Simulation, and Scientific Computing
- Vol. 04 (02)
MODELING AND OPTIMIZATION OF THE CUTTING FLUID FLOW AND PARAMETERS FOR INCREASING TOOL LIFE IN SLOT MILLING ON St52
In this paper the CNC machining of St52 was modeled using an artificial neural network (ANN) in the form of a four-layer multi-layer perceptron (MLP). The cutting parameters used in the model were cutting fluid flow, feed rate, spindle speed and the depth of cut and the model output was the tool life. For obtaining more accuracy and spending less time Taguchi design of experiment (DOE) has been used and correlation between the output of the ANN and the experimental results was 96%. Further optimization process has been done by use of a genetic algorithm (GA). After optimization process tool life was increased about 8% equal to 33 min and was corroborated by experimental tests. This demonstrates that the coupling of an ANN with the GA optimization technique is a valid and useful approach to use.
- 20 June 2013
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modeling, Simulation, and Scientific Computing
- Vol. 04 (02)
MODELING AND OPTIMIZATION OF THE CUTTING FLUID FLOW AND PARAMETERS FOR INCREASING TOOL LIFE IN SLOT MILLING ON St52
In this paper the CNC machining of St52 was modeled using an artificial neural network (ANN) in the form of a four-layer multi-layer perceptron (MLP). The cutting parameters used in the model were cutting fluid flow, feed rate, spindle speed and the depth of cut and the model output was the tool life. For obtaining more accuracy and spending less time Taguchi design of experiment (DOE) has been used and correlation between the output of the ANN and the experimental results was 96%. Further optimization process has been done by use of a genetic algorithm (GA). After optimization process tool life was increased about 8% equal to 33 min and was corroborated by experimental tests. This demonstrates that the coupling of an ANN with the GA optimization technique is a valid and useful approach to use.
- Open Access
- 10 July 2012
- Published by Sciedu Press in Artificial Intelligence Research
- Vol. 1 (1) , p46
CVD and PVD coating process modelling by using artificial neural networks
Thin-film coating plays a prominent role on the manufacture of many industrial devices. Coating can increase material performance due to the deposition process. Having adequate and precise model that can predict the hardness of PVD and CVD processes is so helpful for manufacturers and engineers to choose suitable parameters in order to obtain the best hardness and decreasing cost and time of industrial productions. This paper proposes the estimation of hardness of titanium thin-film layers as protective industrial tools by using multi-layer perceptron (MLP) neural network. Based on the experimental data that was obtained during the process of chemical vapor deposition (CVD) and physical vapor deposition (PVD), the modeling of the coating variables for predicting hardness of titanium thin-film layers, is performed. Then, the obtained results are experimentally verified and very accurate outcomes had been attained.
- 10 July 2012
- Published by Sciedu Press in Artificial Intelligence Research
- Vol. 1 (1) , p46
Open AccessCVD and PVD coating process modelling by using artificial neural networks
Thin-film coating plays a prominent role on the manufacture of many industrial devices. Coating can increase material performance due to the deposition process. Having adequate and precise model that can predict the hardness of PVD and CVD processes is so helpful for manufacturers and engineers to choose suitable parameters in order to obtain the best hardness and decreasing cost and time of industrial productions. This paper proposes the estimation of hardness of titanium thin-film layers as protective industrial tools by using multi-layer perceptron (MLP) neural network. Based on the experimental data that was obtained during the process of chemical vapor deposition (CVD) and physical vapor deposition (PVD), the modeling of the coating variables for predicting hardness of titanium thin-film layers, is performed. Then, the obtained results are experimentally verified and very accurate outcomes had been attained.