JLJianhua Li

Jianhua Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianhua Li has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Coupled CFD-experimental regulation of load capacity and radial runout in vacuum-preloaded aerostatic turntables

    by Dachao Li, Xiaoxu Hu, Jintao Chen, Fengyu Xu, Guangyi Ren, Zhengtian Zhao, Caihua Peng, Jianhua Li

    Research on vacuum-preloaded aerostatic turntables lacks a system-level understanding of multi-parameter coupling, which restricts the precision design of high-performance aerostatic equipment. To address this gap, this study establishes a theoretical model for the static characteristics of such turntables, and conducts systematic investigations through coupled CFD parametric simulations and validation experiments. Key geometric parameters including air film thickness, throttle orifice depth and pressure chamber depth, as well as operating parameters such as supply positive pressure and vacuum degree, are comprehensively analyzed. Simulation results show air film thickness dominates orifice throttling performance and load capacity, while throttle orifice and pressure chamber depths have minimal effects on load capacity. The optimal ranges of all key parameters are determined based on simulation and experimental conclusions. It is found that increasing supply positive pressure linearly improves load capacity but amplifies radial runout, while vacuum preload effectively suppresses runout via enhanced damping with a slight load capacity tradeoff. The optimized turntable achieves 1800 N load capacity with radial runout below 1 μm. This work clarifies the synergistic mechanism of multi-parameter and dual-pressure interaction, providing critical theoretical and engineering guidance for the precision design of high-performance aerostatic systems.

  • Remaining useful life prediction of binary stochastic degradation equipment based on mixed Copula functions

    by Caihua Peng, Jianhua Li, Lina Ren, Dachao Li, Jintao Chen

    In view of the problem of distorted characterization of correlated performance features in the existing RUL prediction methods for degrading equipment based on multivariate correlation characteristics, which is caused by relying on a single Copula function to model the relationships among multiple degradation features, this paper proposes an RUL prediction method based on a mixed Copula function.First, a stochastic degradation model considering multiple degradation modes is established based on the Wiener process. Second, a mixed Copula function formed by a linear combination of Gumbel, Clayton, and Frank Copulas is constructed to characterize the complex correlations among degradation features. Furthermore, the step - by - step maximum likelihood method is used to estimate the parameters in the model. Finally, the effectiveness of the proposed method is verified through simulated degradation datasets, degradation data of LED lighting systems, and metal crack degradation data.


  • Online prediction of fatigue remaining useful life for alloy equipment based on EM algorithm and nonlinear Wiener process

    by Caihua Peng, Jianhua Li, Lina Ren, Shilin Jia

    Under prolonged fatigue loading, fatigue cracks tend to initiate in stress-concentration areas of alloy equipment. The early-stage crack propagation behavior, influenced by the coupling effects of internal stresses and external environmental factors, exhibits highly complex stochastic degradation characteristics. This process may ultimately lead to structural fracture failures, posing significant safety hazards. To prevent sudden failures and enhance operational safety and reliability, implementing precise fatigue remaining useful life (RUL) prediction during early degradation stages for proactive maintenance holds significant engineering importance. However, traditional failure-mechanism-based RUL prediction methods struggle to accurately characterize such intricate degradation processes and associated measurement uncertainties, resulting in limited prediction accuracy. To address this challenge, this study proposes a nonlinear Wiener process-based fatigue RUL method that considers various degradation scenarios while incorporating measurement errors, combining the flexibility of the Wiener stochastic process according to the crack degradation characteristics of alloy equipment. This approach effectively captures the complex stochasticity inherent in crack evolution. Firstly, based on the basic properties of the Wiener process and the concept of first hitting time (FHT), the probability density function (PDF) expressions of the lifetime and RUL corresponding to the degradation model are given in the paper. For precise parameter identification and dynamic updating, the Expectation-Maximization (EM) algorithm is introduced for parameter estimation, combined with Bayesian theory for online parameter updating. Finally, the feasibility of the proposed method is validated using actual fatigue crack degradation data from 2017-T4 aluminum alloy and platinum alloy equipment. Comparative results demonstrate the novelty and superiority of the presented fatigue RUL prediction approach over existing methods.


  • Automatic Crack Locating Algorithm Using a Convolution Kernel Based on Eddy Current Field for the Fractal Planar Eddy Current Probe

    by Guolong Chen, Le Fan, Jing He, Jianfei Shi, Jianhua Li, Wuyin Jin

    The quantitative evaluation of defects is one of the challenges of eddy current testing. Efficient algorithm that requires a small amount of time and hardware resources is needed. In this paper, based on the principle of the interaction between the eddy current field and the cracks, a ternary convolution kernel convolution algorithm based on an eddy current field is proposed to process the C-scan signal of the planar Koch eddy current sensor and locates the 28 cracks. The proposed algorithm comprises three steps: convolution kernel preparation, signal preprocessing, and convolution and positioning. The absolute and relative errors of the position relation between the #1 and the other cracks were less than 1.95 mm and 2.61%, respectively. This algorithm can be used for differential eddy current sensors to auto-locate the crack.


  • High heat transfer plant-inspired neural network structure controlled by variable magnetic field

    by Dachao Li, Taisen Shi, Jianhua Li, Chunling Li, Zhifeng Shi, Tongkai Gu

    Efficient heat dissipation and thermal protection present urgent challenges in high-power integrated circuits (ICs). Although applying a coating of highly thermally conductive materials on the surface of ICs is anticipated to mitigate heat concentration issues, ensuring thermal protection for adjacent devices continues to pose a challenge. Inspired by the microstructure of unidirectional nutrient transport in plant roots, this study utilizes magnetic liquid metal droplets to develop a high thermal conductivity network capable of adaptively manipulating the heat transfer path. This approach aims to tackle the challenges of heat concentration, disordered thermal dissipation, and thermal protection for high-power ICs, thereby enhancing thermal management efficiency. By controlling the distribution of the magnetic field, this study orchestrates the structure of the thermal conduction network to ensure rapid and orderly heat dissipation of ICs while simultaneously validating the network's thermal protection performance. The temperature in the IC thermal concentration zone reaches thermal equilibrium at 399.1 K when the ambient temperature is at 295 K. As the ambient temperature rises to 333 K, the temperature in the IC heat concentration zone stabilizes at approximately 400 K. Simultaneously, the temperature at a specific point in the thermal path of the network registers at 341 K, with the temperatures of the devices flanking this point at 314 K. The magnetron thermal conduction network, inspired by the root structure of bionic plants, not only boosts the thermal management efficiency of ICs but also shows promising application prospects in aerospace, electronics, and other related industries.


  • Open Access

    Effect of Cutting Crystal Directions on Micro-Defect Evolution of Single Crystal γ-TiAl Alloy with Molecular Dynamics Simulation

    by Jianhua Li, Ruicheng Feng, Haiyang Qiao, Haiyan Li, Maomao Wang, Yongnian Qi, Chunli Lei

    In this work, the distribution and evolution of micro-defect in single crystal γ-TiAl alloy during nanometer cutting is studied by means of molecular dynamics simulation. Nanometer cutting is performed along two typical crystal directions: [ 1 ¯ 00 ] and [ 1 ¯ 01 ] . A machined surface, system potential energy, amorphous layer, lattice deformation and the formation mechanism of chip are discussed. The results indicate that the intrinsic stacking fault, dislocation loop and atomic cluster are generated below the machined surface along the cutting crystal directions. In particular, the Stacking Fault Tetrahedron (SFT) is generated inside the workpiece when the cutting crystal direction is along [ 1 ¯ 00 ] . However, a “V”-shape dislocation loop is formed in the workpiece along [ 1 ¯ 01 ] . Furthermore, atomic distribution of the machined surface indicates that the surface quality along [ 1 ¯ 00 ] is better than that along [ 1 ¯ 01 ] . In a certain range, the thickness of the amorphous layer increases gradually with the rise of cutting force during nanometric cutting process.