MCMurthy Cherukuri

Murthy Cherukuri

*This is an algorithmically generated author record based on publicly available information.

Murthy Cherukuri has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    IoT Based Transmission Line Fault Classification Using Regularized RBF-ELM and Virtual PMU in a Smart Grid

    by Kunjabihari Swain, Murthy Cherukuri, Indu Sekhar Samanta, Bhargav Appasani, Nicu Bizon, Mihai Oproescu

    Transmission line faults pose a significant threat to power system resilience, underscoring the need for accurate and rapid fault identification to facilitate proper resource monitoring, economic loss prevention, and blackout avoidance. Extreme learning machine (ELM) offers a compelling solution for rapid classification, achieving network training in a single epoch. Leveraging the Internet of Things (IoT) and the virtual instrumentation capabilities of LabVIEW, ELM can enable the swift and precise identification of transmission line faults. This paper presents a regularized radial basis function (RBF) ELM-based fault detection and classification system for transmission lines, utilizing a LabVIEW based virtual phasor measurement unit (PMU) and IoT sensors. The transmission line fault is identified using the phaselet algorithm applied to the phase current acquired from the virtual PMU. Classification is then performed using the ELM algorithm. The proposed methodology is validated in real-time on a practical transmission line, achieving an accuracy of 99.46%. This has the potential to significantly influence future fault detection strategies incorporating virtual PMUs and machine learning.


  • Open Access

    Fuzzy Markov model for the reliability analysis of hybrid microgrids

    by Kunjabihari Swain, Murthy Cherukuri, Indu Sekhar Samanta, Abhilash Pati, Jayant Giri, Amrutanshu Panigrahi, Hong Qin, Saurav Mallik

    This research presents a process for analyzing a hybrid microgrid's dependability using a fuzzy Markov model. The research initiated an analysis of the various microgrid components, such as wind power systems, solar photovoltaic (PV) systems, and battery storage systems. The states that are induced by component failures are represented using a state-space model. The research continues by suggesting a hybrid microgrid reliability model that analyzes data using a Markov process. Problems arise when trying to estimate reliability metrics for the microgrid using data that is both restricted and imprecise. This is why the study takes uncertainties into account to make microgrid reliability estimations more realistic. The importance of microgrid components concerning their overall availability is evaluated using fuzzy sets and reliability assessments. The study uses numerical analysis and then carefully considers the outcomes. The overall availability of hybrid microgrids is 0.99999.


  • Open Access

    Feature Extraction and Classification of Power Quality Disturbances Using Optimized Tunable-Q Wavelet Transform and Incremental Support Vector Machine

    by Indu Sekhar Samanta, Pravat Kumar Rout, Kunjabihari Swain, Satyasis Mishra, Murthy Cherukuri

    The widespread integration of renewable energy sources (RESs) into power systems using power electronics-based interface devices has led to a substantial rise in power quality (PQ) issues. There is an immediate requirement for effective monitoring, detection, and classification of power quality disturbances (PQDs) that is needed to take remedial measures and design planning of the system architecture. This study presents a hybrid approach with an objective for the feature extraction and classification of PQDs. The proposed hybrid approach is comprised of an optimized tunable-Q wavelet transform (OTQWT) for the feature extraction and incremental support vector machine (ISVM). A four-stage approach is suggested for the PQ detection and classification in this study. In the first stage, the various data are retrieved both in the form of synthetic data by mathematical formulations and real-time data with prototype design setup. In the second stage, regardless of the specified wavelet function, the PQD signals are decomposed into low-pass and high-pass sub-bands using the tunable-Q wavelet transform (TQWT). However, the utilization of default decomposition parameters to address nonstationary PQ signals may lead to information loss and reduced performance of the system. To avoid this limitation, an OTQWT as an enhanced technique to TQWT based on an Adaptive Particle Swarm Optimization (APSO) is suggested. A modified objective function based on the mean square error (MSE) is used to improve the decomposition process. In the third stage, an efficient classifier is suggested based on the ISVM. Lastly, to test and evaluate the performance of the proposed approach, twelve types of PQDs including noise and multiple occurrences are considered. The comparative analysis with other popular methods reflects the better performance of the proposed approach and justifies its use for PQ detection and classification purposes in real-time conditions.


  • Open Access

    Modified Differential Evolution Algorithm for Governing Virtual Inertia of an Isolated Microgrid Integrating Electric Vehicles

    by Debayani Mishra, Manoj Kumar Maharana, Manoj Kumar Kar, Anurekha Nayak, Murthy Cherukuri

    In modern power systems, there is a greater penetration of renewable sources, resulting in the expansion of microgrid. By implementing RES instead of conventional synchronous machines, the systems overall inertia is significantly reduced. Modern and future power systems must reduce system inertia and keep the frequency at its nominal value since frequency oscillation impacts on the functionality, stability, and resilience of the system. Therefore, creating a stable, scalable, and reliable virtual inertia control system is crucial to effectively minimize the deviations during significant contingencies. Consequently, taking into account the probable issues, the foremost objective of this research work is to improve the dynamic security of an island microgrid through the implementation of a frequency control concept based on virtual inertia control. In the research study, the proposed microgrid system comprises of photovoltaics, wind-generating units, thermal power units, storage units, electric vehicles (EVs), and loads. A cascaded PIDFN controller is optimally designed using a novel metaheuristic modified differential evolution (MDE) algorithm that regulates the frequency based on virtual inertia control. In the MATLAB®/SIMULINK environment, various operating situations such as load variations, RES, and EVs disconnection are investigated, and the performance of the VIC-based MDE controller was compared to that of other controllers based on evolutionary optimization algorithms such as DE and TLBO. The results validate that the recommended virtual inertia control strategy enhances the reliability of the system.


  • Compatibility Analysis of IoT with 5G and 6G Communication

    by Indu Sekhar Samanta, Pravat Kumar Rout, Manas Ranjan Lenka, Murthy Cherukuri, Kunjabihari Swain

    The Internet of Things (IoT) has been the talk of the town for quite some time now, and its adoption is growing rapidly. With the growth of IoT, there is a need for high-speed communication networks to support a large number of connected devices and the data they generate. The fifth-generation (5G) and sixth-generation (6G) communication networks are being developed to address this need. This research paper aims to analyze the compatibility of IoT with 5G and 6G communication networks. The paper also discusses the potential benefits and challenges of using 5G and 6G in IoT applications


  • Open Access

    A Novel Metaheuristic Jellyfish Optimization Algorithm for Parameter Extraction of Solar Module

    by Dilip Yadav, Nidhi Singh, Vikas Singh Bhadoria, Nimay Chandra Giri, Murthy Cherukuri

    Accurate parameter identification plays an integral role in the modeling of an optimized solar module which in turn helps in the error-free prediction of its output. Five important parameters: the photoelectric current (Iph), ideality factor(α), saturation current (Io), series resistance (Rs), and shunt resistance (Rsh) are required for the accurate modeling of the PV cells/modules and need to be extracted as these parameters are not provided by the manufacturer in the datasheet. This paper proposes a new metaheuristic jellyfish optimization (JFO) algorithm for the parameter extraction of a solar module. The JFO algorithm achieves the optimal solution without being trapped in local solutions in less time. The parameter extraction using the JFO algorithm is done on two different solar modules i.e., Soltech-1STH-215P and PWP-201. The results are compared in terms of extracted parameters (Iph, α, Io, Rs, and Rsh) with the well-known optimization techniques like PSO, GA, and others available in the literature and with the manufacturer IV and PV characteristics. The proposed technique IV and PV characteristics are validated at different environmental conditions and are found to be similar to that of PSO and GA. It is also observed that the extracted parameters obtained using JFO are comparable with the other twenty-two techniques, and the proposed technique is one of the highly efficient techniques that can be utilized for parameter extraction of PV modules and to predict solar cell characteristics for all commercial modules without setting up any experimental measurements. MATLAB/simulation software is used for implementation and performance validation.


  • Unmanned Integrated Autonomous Vehicle: Swayambhu

    by Ankit Anand, Murthy Cherukuri, Indu Sekhar Samanta, Kunjabihari Swain

    Every human life is valuable. Soldiers are in charge of security at the country's borders. Many soldiers were killed as a result of terror strikes on the frontiers. With advancements in science and technology, Security systems have improved significantly. Robotics is one of the technologies that are now receiving significant attention. The development of autonomous decision-making robots' potential to kill terrorists is one of the most remarkable breakthroughs. These robots can operate at locations where humans cannot reach them. These bots can also execute self-exploiting actions without endangering the soldiers' lives. This autonomous vehicle is intelligent enough to detect buried landmines, bombs, and weaponry, pick bombs with its 6-axis hand and throw them away. The term “autonomous” refers to a system that can control itself and is controlled by the authorized deputed user. This autonomous vehicle has an embedded camera that sends video streams to the headquarters and can also detect suspicious behavior and respond appropriately. This article presents the design and working of an unmanned autonomous vehicle named “Swayambhu.”


  • Open Access

    Design and Analysis of FOPID-Based Damping Controllers Using a Modified Grey Wolf Optimization Algorithm

    by Manoj Kumar Kar, Sanjay Kumar, Arun Kumar Singh, Sibarama Panigrahi, Murthy Cherukuri

    This study proposes a novel modified grey-wolf optimization algorithm (MGWOA) to enhance power system stability. The power system stabilizer and static synchronous series compensator (SSSC) are used as damping controllers. Additionally, fractional-order PID (FOPID) controller is used to handle the system nonlinearities and thus achieve better performance. The control parameters are tuned using the proposed MGWOA method which has been verified on unimodal and multimodal functions. Single-machine infinite bus (SMIB) and multimachine power system (MMPS) are taken as case studies to analyze the efficacy of the proposed controller. Minimization of rotor speed deviation is considered an objective function. The results obtained from the MGWOA-tuned FOPID-based damping controllers are compared with those obtained using recently developed efficient and competitive heuristic algorithms. It was observed that the MGWOA method is well-suited for damping low-frequency oscillations. Furthermore, statistical analysis is performed on the obtained results to justify the superiority of the MGWOA method. The simulation results suggest that the MGWOA exhibits superior performance characteristics when applied to a real power system.