Sina Varahram
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sina Varahram has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Peyman Jalali
Vibration and Modal Analysis Research Lab, Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
3 shared publicationsHadi Jafari
2 shared publications- Meysam Bayat
Department of Civil Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 shared publications Mir Mohammad Ettefagh
2 shared publications- Mir Mohammad Ettefagh
Department of Mechanical Engineering, University of Tabriz, Iran
2 shared publications - Mohammadreza Farhadi
Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran
2 shared publications
Latest Publications
- Open Access
- 19 December 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (5) , 1581
Correction: A hybrid wavelet-deep learning approach for vibration-based damage detection in monopile offshore structures considering soil interaction
- 19 December 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (5) , 1581
Open AccessCorrection: A hybrid wavelet-deep learning approach for vibration-based damage detection in monopile offshore structures considering soil interaction
- 2 November 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (2) , 417-444
A hybrid wavelet-deep learning approach for vibration-based damage detection in monopile offshore structures considering soil interaction
- 2 November 2024
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (2) , 417-444
A hybrid wavelet-deep learning approach for vibration-based damage detection in monopile offshore structures considering soil interaction
- Open Access
- 22 November 2019
- Published by Faculty of Mechanical Engineering and Naval Architecture, Univ. of Zagreb in Transactions of FAMENA
- Vol. 43 (3) , 37-52
Experimental Study on the Effect of Excitation Type on the Output-Only Modal Analysis Results
Output-only Modal Analysis (OMA) has found extensive use in the identification of dynamic properties of structures. This study aims to investigate the effect of excitation force on the accuracy of modal parameters. For this purpose, the...
- 22 November 2019
- Published by Faculty of Mechanical Engineering and Naval Architecture, Univ. of Zagreb in Transactions of FAMENA
- Vol. 43 (3) , 37-52
Open AccessExperimental Study on the Effect of Excitation Type on the Output-Only Modal Analysis Results
Output-only Modal Analysis (OMA) has found extensive use in the identification of dynamic properties of structures. This study aims to investigate the effect of excitation force on the accuracy of modal parameters. For this purpose, the...
- 3 February 2017
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 89-98
An Investigation into the Voice Energy Level of Pronounced Persian Explosive Consonants by Signal Processing Approach
A voice is a sound which is created by vibration of the vocal cords, which means that, the vocal cords approach to each other by passing the air through the larynx and followed by different sounds. This vibration is under the influence of the statuses of tongue, teeth and lips, as well as the other effective factors. This vibrating air causes some minor changes around the individual speaker, which is called the voice. Some of the most important procedures in the voice signal analyzing is the signal processing methods in frequency and time-frequency domains; the most conventional approach in frequency domain is the Fast Fourier Transform (FFT) method, on the other hand the time-frequency signal processing methods can identify the frequency components of the signal and extract its time-varying characteristics; moreover they are effective tools for extracting the information of non-stationary signals. Time-frequency analysis methods can be classified into linear and nonlinear categories. The Short-Time Fourier Transform and the Wavelet Transform are the most conventional linear methods. This paper investigates the differences in the energy levels of explosive consonants in voiced mode and unvoiced mode using the most conventional frequency analysis and linear time-frequency analysis methods; these approaches are very effective and profitable in phonetic science and biomedical engineering science in order to diagnosing and determining the severity of laryngeal diseases and brain injuries. Results of this study indicate that the energy level of explosive consonants in voiced mode is more than unvoiced mode; also using Fast Fourier and Wavelet Transforms presents the results in better resolution and better image quality than the short-time Fourier Transform.
- 3 February 2017
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 89-98
An Investigation into the Voice Energy Level of Pronounced Persian Explosive Consonants by Signal Processing Approach
A voice is a sound which is created by vibration of the vocal cords, which means that, the vocal cords approach to each other by passing the air through the larynx and followed by different sounds. This vibration is under the influence of the statuses of tongue, teeth and lips, as well as the other effective factors. This vibrating air causes some minor changes around the individual speaker, which is called the voice. Some of the most important procedures in the voice signal analyzing is the signal processing methods in frequency and time-frequency domains; the most conventional approach in frequency domain is the Fast Fourier Transform (FFT) method, on the other hand the time-frequency signal processing methods can identify the frequency components of the signal and extract its time-varying characteristics; moreover they are effective tools for extracting the information of non-stationary signals. Time-frequency analysis methods can be classified into linear and nonlinear categories. The Short-Time Fourier Transform and the Wavelet Transform are the most conventional linear methods. This paper investigates the differences in the energy levels of explosive consonants in voiced mode and unvoiced mode using the most conventional frequency analysis and linear time-frequency analysis methods; these approaches are very effective and profitable in phonetic science and biomedical engineering science in order to diagnosing and determining the severity of laryngeal diseases and brain injuries. Results of this study indicate that the energy level of explosive consonants in voiced mode is more than unvoiced mode; also using Fast Fourier and Wavelet Transforms presents the results in better resolution and better image quality than the short-time Fourier Transform.
- 1 January 2017
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 89
An Investigation into the Voice Energy Level of Pronounced Persian Explosive Consonants by Signal Processing Approach
A voice is a sound which is created by vibration of the vocal cords, which means that, the vocal cords approach to each other by passing the air through the larynx and followed by different sounds. This vibration is under the influence of the statuses of tongue, teeth and lips, as well as the other effective factors. This vibrating air causes some minor changes around the individual speaker, which is called the voice. Some of the most important procedures in the voice signal analyzing is the signal processing methods in frequency and time-frequency domains; the most conventional approach in frequency domain is the Fast Fourier Transform (FFT) method, on the other hand the time-frequency signal processing methods can identify the frequency components of the signal and extract its time-varying characteristics; moreover they are effective tools for extracting the information of non-stationary signals. Time-frequency analysis methods can be classified into linear and nonlinear categories. The Short-Time Fourier Transform and the Wavelet Transform are the most conventional linear methods. This paper investigates the differences in the energy levels of explosive consonants in voiced mode and unvoiced mode using the most conventional frequency analysis and linear time-frequency analysis methods; these approaches are very effective and profitable in phonetic science and biomedical engineering science in order to diagnosing and determining the severity of laryngeal diseases and brain injuries. Results of this study indicate that the energy level of explosive consonants in voiced mode is more than unvoiced mode; also using Fast Fourier and Wavelet Transforms presents the results in better resolution and better image quality than the short-time Fourier Transform.
- 1 January 2017
- Published by University of Liege in Bulletin de la Société Royale des Sciences de Liège
- p. 89
An Investigation into the Voice Energy Level of Pronounced Persian Explosive Consonants by Signal Processing Approach
A voice is a sound which is created by vibration of the vocal cords, which means that, the vocal cords approach to each other by passing the air through the larynx and followed by different sounds. This vibration is under the influence of the statuses of tongue, teeth and lips, as well as the other effective factors. This vibrating air causes some minor changes around the individual speaker, which is called the voice. Some of the most important procedures in the voice signal analyzing is the signal processing methods in frequency and time-frequency domains; the most conventional approach in frequency domain is the Fast Fourier Transform (FFT) method, on the other hand the time-frequency signal processing methods can identify the frequency components of the signal and extract its time-varying characteristics; moreover they are effective tools for extracting the information of non-stationary signals. Time-frequency analysis methods can be classified into linear and nonlinear categories. The Short-Time Fourier Transform and the Wavelet Transform are the most conventional linear methods. This paper investigates the differences in the energy levels of explosive consonants in voiced mode and unvoiced mode using the most conventional frequency analysis and linear time-frequency analysis methods; these approaches are very effective and profitable in phonetic science and biomedical engineering science in order to diagnosing and determining the severity of laryngeal diseases and brain injuries. Results of this study indicate that the energy level of explosive consonants in voiced mode is more than unvoiced mode; also using Fast Fourier and Wavelet Transforms presents the results in better resolution and better image quality than the short-time Fourier Transform.