Lillian Gungat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lillian Gungat has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Nur Izzi Md. Yusoff
Universiti Kebangsaan Malaysia
4 shared publications Nur Syazleen Hamsah
Universiti Malaysia Sabah
3 shared publicationsNurul Ariqah Ispal
Universiti Malaysia Sabah
3 shared publications- Muhamad Razuhanafi Mat Yazid
Department of Civil Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Malaysia
2 shared publications - Nurmin Bolong
Universiti Malaysia Sabah
2 shared publications - Shabir Hussain Khahro
Prince Sultan University
2 shared publications
Latest Publications
- 3 June 2026
- Published by Springer Nature
- p. 79-90
Enhancing Engineering Properties of Modified Bitumen Using Cup Lump Natural Rubber: A Focus on Mixing Approach
- 3 June 2026
- Published by Springer Nature
- p. 79-90
Enhancing Engineering Properties of Modified Bitumen Using Cup Lump Natural Rubber: A Focus on Mixing Approach
- Open Access
- 30 December 2025
- Published by EngiScience Publisher in Journal of Studies in Science and Engineering
- Vol. 5 (2) , 1-14
A BIM-Enabled Workflow for Energy Use Intensity (EUI) Assessment to Support Sustainable Building Design: Case-Study Validation
Building Information Modelling (BIM) is a powerful tool that enhances sustainability in campus buildings by enabling precise energy analysis, optimizing design for energy efficiency, and integrating sustainable practices throughout the building lifecycle. BIM facilitates detailed simulations and assessments, minimizing energy consumption and reducing environmental impact from design to decommissioning. This study is set against the urgent global need for decarbonization in the building sector, a key driver of energy-related carbon emissions. BIM can model and predict energy performance in institutions with substantial energy demands, leading to significant sustainability gains. This study investigates the energy performance of the Faculty of Science and Natural Resources at Universiti Malaysia Sabah by analyzing EUI (energy use intensity) using BIM technology. A 3D model of the faculty building was created with Autodesk Revit 2023, followed by energy optimization using Autodesk Insight 360. Seven design approaches were evaluated, resulting in a 63.7% improvement in energy efficiency, reducing EUI from 343 to 115 kWh/m²/year, significantly below the Malaysian Standard MS1525:2007 benchmark of 135 kWh/m²/year. The findings demonstrate that BIM can optimize EUI, reduce carbon emissions, and enhance the energy performance of institutional buildings, supporting Malaysia's goal of becoming a carbon-free nation by 2050 and ensuring sustainable and efficient energy.
- 30 December 2025
- Published by EngiScience Publisher in Journal of Studies in Science and Engineering
- Vol. 5 (2) , 1-14
Open AccessA BIM-Enabled Workflow for Energy Use Intensity (EUI) Assessment to Support Sustainable Building Design: Case-Study Validation
Building Information Modelling (BIM) is a powerful tool that enhances sustainability in campus buildings by enabling precise energy analysis, optimizing design for energy efficiency, and integrating sustainable practices throughout the building lifecycle. BIM facilitates detailed simulations and assessments, minimizing energy consumption and reducing environmental impact from design to decommissioning. This study is set against the urgent global need for decarbonization in the building sector, a key driver of energy-related carbon emissions. BIM can model and predict energy performance in institutions with substantial energy demands, leading to significant sustainability gains. This study investigates the energy performance of the Faculty of Science and Natural Resources at Universiti Malaysia Sabah by analyzing EUI (energy use intensity) using BIM technology. A 3D model of the faculty building was created with Autodesk Revit 2023, followed by energy optimization using Autodesk Insight 360. Seven design approaches were evaluated, resulting in a 63.7% improvement in energy efficiency, reducing EUI from 343 to 115 kWh/m²/year, significantly below the Malaysian Standard MS1525:2007 benchmark of 135 kWh/m²/year. The findings demonstrate that BIM can optimize EUI, reduce carbon emissions, and enhance the energy performance of institutional buildings, supporting Malaysia's goal of becoming a carbon-free nation by 2050 and ensuring sustainable and efficient energy.
- Open Access
- 28 May 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 397, 02002
Optimization of Bio Asphalt Derived from Pyrolysis Bio Oil for Bitumen Modification
Due to inadequate crude oil supply and a rising demand for petroleum asphalt in roadconstruction, the asphalt sector faces a continuing shortage. Continous research was conducted on renewable materials such as bio-oils derived via pyrolysis from local palm oil industries. Bio-oil is currently a viable option due to its renewability, environmental friendliness, and variety of sources. Despite numerous studies indicating that biooils enhance the properties of bitumen, the research on the effects of PKS biooil on bitumen properties is minimal and needed further investigations. The application of 2,4-diphenylmethane diisocyanate (MDI) in this study is established to enhance the properties of bio-oil modified bitumen. The objectives of this study are to analyse the relationship between the percentage andratio of PKS bio-oil and 2,4-diphenylmethane diisocyanate (MDI) of the modified bitumen, its physical and chemical effects and the optimization of bio-asphalt mixture after the 2,4diphenylmethane diisocyanate (MDI) has been blended with PKS bio-oil and bitumen. PKS bio-oil and MDI were applied into the bitumen as additive and replacement of bitumen at 3%, 5% and 7% with two different ratios; 1.0:0.6 and 1.0:1.0. The functional groups of the bitumen are identified using Fourier Transform Infrared (FTIR) analysis. The result generated from FTIR analysis showed that the modified bitumen samples were slightly different when compared to the conventional bitumen regarding the functional group. Response surface methodology (RSM)was implemented to determine the statistical analysis and optimum amount of PKS bio-oil and MDI content in the bitumen, through central composite design.
- 28 May 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 397, 02002
Open AccessOptimization of Bio Asphalt Derived from Pyrolysis Bio Oil for Bitumen Modification
Due to inadequate crude oil supply and a rising demand for petroleum asphalt in roadconstruction, the asphalt sector faces a continuing shortage. Continous research was conducted on renewable materials such as bio-oils derived via pyrolysis from local palm oil industries. Bio-oil is currently a viable option due to its renewability, environmental friendliness, and variety of sources. Despite numerous studies indicating that biooils enhance the properties of bitumen, the research on the effects of PKS biooil on bitumen properties is minimal and needed further investigations. The application of 2,4-diphenylmethane diisocyanate (MDI) in this study is established to enhance the properties of bio-oil modified bitumen. The objectives of this study are to analyse the relationship between the percentage andratio of PKS bio-oil and 2,4-diphenylmethane diisocyanate (MDI) of the modified bitumen, its physical and chemical effects and the optimization of bio-asphalt mixture after the 2,4diphenylmethane diisocyanate (MDI) has been blended with PKS bio-oil and bitumen. PKS bio-oil and MDI were applied into the bitumen as additive and replacement of bitumen at 3%, 5% and 7% with two different ratios; 1.0:0.6 and 1.0:1.0. The functional groups of the bitumen are identified using Fourier Transform Infrared (FTIR) analysis. The result generated from FTIR analysis showed that the modified bitumen samples were slightly different when compared to the conventional bitumen regarding the functional group. Response surface methodology (RSM)was implemented to determine the statistical analysis and optimum amount of PKS bio-oil and MDI content in the bitumen, through central composite design.
- Open Access
- 28 May 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 397, 02003
Review of Mixing Mechanism and Performance of Natural Rubber with Bituminous Materials
Road degradation is a common problem in Malaysia which caused by weather changes, expanding loads as well as the effects of ageing, moisture and temperature results in high maintenance expenses on conventional bitumen pavement. Therefore, it has been recommended on the modification of bitumen as a substitute technique to address this issue and extend the pavement’s lifespan. This study addresses the inadequacy of existing solutions by focusing on the direct mixing approach and the use of pre-treatment using chemical solvent and some additives specifically on epoxidized natural rubber, natural rubber latex and cup lump natural rubber (CLNR). Additionally, this study intends to give a brief summary of how bitumen performance is improved by the inclusion of additives or modifiers by emphasizing the key attributes of modified bitumen after the addition of modifiers. Further information is also provided on the quantity and application method of each addition in order to determine the ideal value for different applications. This study will examine the use of several additives based on past research, such as polyphosphoric acid, Zychotherm, as well as the use of toluene and xylene to maintain the homogeneity of the rubberized bitumen. Studies on the usage of cup lump natural rubber (CLNR) are not common, thus future study should investigate more closely at CLNR and its mixing technique. This research contributes to the field by providing insights into the practical application of modified bitumen for sustainable road construction, especially in regions with a significant rubber industry.
- 28 May 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 397, 02003
Open AccessReview of Mixing Mechanism and Performance of Natural Rubber with Bituminous Materials
Road degradation is a common problem in Malaysia which caused by weather changes, expanding loads as well as the effects of ageing, moisture and temperature results in high maintenance expenses on conventional bitumen pavement. Therefore, it has been recommended on the modification of bitumen as a substitute technique to address this issue and extend the pavement’s lifespan. This study addresses the inadequacy of existing solutions by focusing on the direct mixing approach and the use of pre-treatment using chemical solvent and some additives specifically on epoxidized natural rubber, natural rubber latex and cup lump natural rubber (CLNR). Additionally, this study intends to give a brief summary of how bitumen performance is improved by the inclusion of additives or modifiers by emphasizing the key attributes of modified bitumen after the addition of modifiers. Further information is also provided on the quantity and application method of each addition in order to determine the ideal value for different applications. This study will examine the use of several additives based on past research, such as polyphosphoric acid, Zychotherm, as well as the use of toluene and xylene to maintain the homogeneity of the rubberized bitumen. Studies on the usage of cup lump natural rubber (CLNR) are not common, thus future study should investigate more closely at CLNR and its mixing technique. This research contributes to the field by providing insights into the practical application of modified bitumen for sustainable road construction, especially in regions with a significant rubber industry.
- 4 January 2024
- Published by Springer Nature
- p. 103-115
Determination of Optimum Binder Content of Dry-Mixed Crumb Rubber in Stone Mastic Asphalt Using Sandstone Aggregate
- 4 January 2024
- Published by Springer Nature
- p. 103-115
Determination of Optimum Binder Content of Dry-Mixed Crumb Rubber in Stone Mastic Asphalt Using Sandstone Aggregate
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3026 (1)
Utilisation of reclaimed asphalt pavement with warm mix asphalt as sustainable pavement technologies: Comprehensive review and challenges
The production of asphalt mixture for road construction which contributes to the environmental issue precisely due to various gas emissions has been a concern b
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3026 (1)
Utilisation of reclaimed asphalt pavement with warm mix asphalt as sustainable pavement technologies: Comprehensive review and challenges
The production of asphalt mixture for road construction which contributes to the environmental issue precisely due to various gas emissions has been a concern b
- Open Access
- 31 October 2023
- Published by Penerbit UTHM in International Journal of Sustainable Construction Engineering Technology
- Vol. 14 (5) , 399-407
Utilization of Micronized Polyethylene Terephthalate (MPET) as a Filler in Asphalt Pavement
Nowadays, plastic pollution is one of the most critical issues related to sustainability development that need to be solved. Studies indicated that addition of certain amount of recycled plastic from Polyethylene Terephthalate (PET) in asphalt mixture has improved the engineering properties such as marshall stability, moisture resistance, rutting and fatigue resistance. However,the main challenge of direct incorporation of recycled plastic in binder is the thermal incompatibility of two phases which are glass transition and melting temperature.Previous research findings indicated that reduction in particles diameter to micro scale would decrease the PET melting point. Hence, this study investigates the potential of micronized PET from recycled plastic bottle as filler in asphalt pavement. Micronization process at laboratory was carried out to determine the appropriate method prior incorporating it into asphalt mixture. The micronized size of PET incorporated at 0%, 4%, 8%, and 12% by weight of filler is then evaluated for its volumetric properties,mechanical, and adhesion properties. The results showed that the volumetric properties of the asphalt were affected by the presence of micronized PET. The mechanical properties in terms of Resilient Modulus and Indirect Tensile Strength showed increment with addition of micronized PET. Similar trend also observed on adhesion properties. Hence, the findings indicated the potential of utilizing the recycled MPET for local road construction.
- 31 October 2023
- Published by Penerbit UTHM in International Journal of Sustainable Construction Engineering Technology
- Vol. 14 (5) , 399-407
Open AccessUtilization of Micronized Polyethylene Terephthalate (MPET) as a Filler in Asphalt Pavement
Nowadays, plastic pollution is one of the most critical issues related to sustainability development that need to be solved. Studies indicated that addition of certain amount of recycled plastic from Polyethylene Terephthalate (PET) in asphalt mixture has improved the engineering properties such as marshall stability, moisture resistance, rutting and fatigue resistance. However,the main challenge of direct incorporation of recycled plastic in binder is the thermal incompatibility of two phases which are glass transition and melting temperature.Previous research findings indicated that reduction in particles diameter to micro scale would decrease the PET melting point. Hence, this study investigates the potential of micronized PET from recycled plastic bottle as filler in asphalt pavement. Micronization process at laboratory was carried out to determine the appropriate method prior incorporating it into asphalt mixture. The micronized size of PET incorporated at 0%, 4%, 8%, and 12% by weight of filler is then evaluated for its volumetric properties,mechanical, and adhesion properties. The results showed that the volumetric properties of the asphalt were affected by the presence of micronized PET. The mechanical properties in terms of Resilient Modulus and Indirect Tensile Strength showed increment with addition of micronized PET. Similar trend also observed on adhesion properties. Hence, the findings indicated the potential of utilizing the recycled MPET for local road construction.
- 27 January 2022
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 84 (2) , 1-7
INVESTIGATION ON THE BARRIERS OF CRUMB RUBBER USAGE FOR ROADS CONSTRUCTION: CASE STUDY AT SABAH
The usage of crumb rubber in road construction has been widely acknowledged and extensively implemented globally and even locally in Malaysia due to the substantial benefits and versatility of this material contribution in road works. Even though the used of crumb rubber material in road works has been reported since the 1950s, in Malaysia, the implementation of rubberised roads technology concept have been limited and emphasised only in Peninsular Malaysia. In contrast, there have been no recorded trials or construction inroads applying this technology in Sabah. Therefore, there is a necessity to investigate the awareness, advantages, barriers, strategies, and personal opinion regarding crumb rubber usage in the road's construction of Sabah. Questionnaire surveys and structured interviews from stakeholders of the construction industries within Sabah were conducted. The quantitative data collected was tested by descriptive statistics frequencies analysis respective to each section. Further assessment on Cronbach's Alpha test, mean value comparison, relative important index, chi-square test and regression analysis were performed to interested sections. Findings showed that the main advantages and barrier were environmentally friendly factor and financial barriers. Hence respondents propose that guidelines and construction standards as a guidance for the local road agency to be available.
- 27 January 2022
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 84 (2) , 1-7
INVESTIGATION ON THE BARRIERS OF CRUMB RUBBER USAGE FOR ROADS CONSTRUCTION: CASE STUDY AT SABAH
The usage of crumb rubber in road construction has been widely acknowledged and extensively implemented globally and even locally in Malaysia due to the substantial benefits and versatility of this material contribution in road works. Even though the used of crumb rubber material in road works has been reported since the 1950s, in Malaysia, the implementation of rubberised roads technology concept have been limited and emphasised only in Peninsular Malaysia. In contrast, there have been no recorded trials or construction inroads applying this technology in Sabah. Therefore, there is a necessity to investigate the awareness, advantages, barriers, strategies, and personal opinion regarding crumb rubber usage in the road's construction of Sabah. Questionnaire surveys and structured interviews from stakeholders of the construction industries within Sabah were conducted. The quantitative data collected was tested by descriptive statistics frequencies analysis respective to each section. Further assessment on Cronbach's Alpha test, mean value comparison, relative important index, chi-square test and regression analysis were performed to interested sections. Findings showed that the main advantages and barrier were environmentally friendly factor and financial barriers. Hence respondents propose that guidelines and construction standards as a guidance for the local road agency to be available.
- 16 September 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (7) , 10771-10781
Pavement maintenance management framework for flexible roads: a case study of Pakistan
Roads play a pivotal role in the overall economic growth of any country. Developed countries allocated sufficient budget to make new roads and to maintain the existing roads. They also have a proper pavement management system (PMS) in practice to manage roads, whereas developing countries suffer from budgetary issues to make new roads and maintain the existing road network. Therefore, this paper explores the awareness of PMS via direct and indirect methods in Pakistan with a proposed framework of the low-cost model and pavement maintenance indicators for developing countries. This paper also performs a scientometric assessment of PMS. A detailed literature review has been carried out for this study, followed by a quantitative study from experienced professionals. The scientometric data is collected from the Scopus database from 1975 to 2020, whereas the data for PMS awareness assessment has been collected using questionnaires from different experts working directly and indirectly in the road management sector. The data has been analyzed using the arithmetic mean because of the nature of the questions and scope of the study. The direct method results show that experts are aware of PMS for a new road, but they have no PMS to rehabilitate roads. The indirect method results show that the authorities are applying various components of PMS, but there is no proper PMS in practice. This paper helps decision-makers to make better decisions and policies for improved road maintenance and rehabilitation. The proposed framework in the study can significantly assist the UN-SDG 9 (Facilitate Sustainable Infrastructure in Developing Countries) and 11 (Affordable and Sustainable Transport System).
- 16 September 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (7) , 10771-10781
Pavement maintenance management framework for flexible roads: a case study of Pakistan
Roads play a pivotal role in the overall economic growth of any country. Developed countries allocated sufficient budget to make new roads and to maintain the existing roads. They also have a proper pavement management system (PMS) in practice to manage roads, whereas developing countries suffer from budgetary issues to make new roads and maintain the existing road network. Therefore, this paper explores the awareness of PMS via direct and indirect methods in Pakistan with a proposed framework of the low-cost model and pavement maintenance indicators for developing countries. This paper also performs a scientometric assessment of PMS. A detailed literature review has been carried out for this study, followed by a quantitative study from experienced professionals. The scientometric data is collected from the Scopus database from 1975 to 2020, whereas the data for PMS awareness assessment has been collected using questionnaires from different experts working directly and indirectly in the road management sector. The data has been analyzed using the arithmetic mean because of the nature of the questions and scope of the study. The direct method results show that experts are aware of PMS for a new road, but they have no PMS to rehabilitate roads. The indirect method results show that the authorities are applying various components of PMS, but there is no proper PMS in practice. This paper helps decision-makers to make better decisions and policies for improved road maintenance and rehabilitation. The proposed framework in the study can significantly assist the UN-SDG 9 (Facilitate Sustainable Infrastructure in Developing Countries) and 11 (Affordable and Sustainable Transport System).
- Open Access
- 25 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (11) , 5941
Low-Cost Pavement Management System for Developing Countries
Governments face numerous challenges in sustaining road network conditions. This is attributed to road authorities’ shortages of financial and physical infrastructure. As a result, low-cost automated solutions are being pursued to solve these problems and provide people with appropriate road conditions. Several attempts have been made to improve these technologies and incorporate them into a Pavement Management System (PMS) but limited attempts are made for developing countries. This study aimed to design a low-cost pavement management system for flexible pavement maintenance. A detailed literature review has been carried out, followed by a qualitative assessment of the various indicators considered for PMS. The priority ranks of the PMS indicators were made using an Analytical Network Process (ANP) and each rank was validated by a sensitivity assessment test using the Super Decision-Making tool. This paper also provides the conceptual framework for the low-cost PMS, followed by a fishbone diagram of the indicators and sub-indicators. It is concluded that an emergency maintenance plan with an ANP weight of (0.41) is one of the most significant plans for a low-cost PMS, followed by a routine with an ANP weight of (0.39) and periodic maintenance plans with a (0.20) ANP weight. Moreover, the functional indicators with an ANP weight of (0.32) are the most significant indicators for a low-cost PMS, followed by structural (0.26), safety (0.24), and serviceability(0.18) indicators. This model will assist the road planners in making better decisions on pavement maintenance management plans. The model will suggest the pavement sections on a higher priority to be added in the maintenance plans, especially where the maintenance budget is limited.
- 25 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (11) , 5941
Open AccessLow-Cost Pavement Management System for Developing Countries
Governments face numerous challenges in sustaining road network conditions. This is attributed to road authorities’ shortages of financial and physical infrastructure. As a result, low-cost automated solutions are being pursued to solve these problems and provide people with appropriate road conditions. Several attempts have been made to improve these technologies and incorporate them into a Pavement Management System (PMS) but limited attempts are made for developing countries. This study aimed to design a low-cost pavement management system for flexible pavement maintenance. A detailed literature review has been carried out, followed by a qualitative assessment of the various indicators considered for PMS. The priority ranks of the PMS indicators were made using an Analytical Network Process (ANP) and each rank was validated by a sensitivity assessment test using the Super Decision-Making tool. This paper also provides the conceptual framework for the low-cost PMS, followed by a fishbone diagram of the indicators and sub-indicators. It is concluded that an emergency maintenance plan with an ANP weight of (0.41) is one of the most significant plans for a low-cost PMS, followed by a routine with an ANP weight of (0.39) and periodic maintenance plans with a (0.20) ANP weight. Moreover, the functional indicators with an ANP weight of (0.32) are the most significant indicators for a low-cost PMS, followed by structural (0.26), safety (0.24), and serviceability(0.18) indicators. This model will assist the road planners in making better decisions on pavement maintenance management plans. The model will suggest the pavement sections on a higher priority to be added in the maintenance plans, especially where the maintenance budget is limited.