Arun Valsangkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arun Valsangkar has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Campbell Bryden
Department of Civil Engineering, University of New Brunswick, Fredericton, NB E3B 5A3, Canada
3 shared publications - Kaveh Arjomandi
University of New Brunswick
3 shared publications Allison B. Schriver
University of New Brunswick
1 shared publicationRochelle Brown
Jacques Whitford and Assoc. Ltd
1 shared publication
Latest Publications
- 1 November 2018
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 23 (4)
Modified Elastic Parameters for the Dynamic Axial Impedance of Driven Piles
Experimental investigations reported in the literature have shown that pile foundations exhibit nonlinear behavior when subject to dynamic axial service loads. The nonlinear characteristics are attributed to soil remolding, soil nonlinearity, and pile–soil separation/slippage. The traditional methodology for computing the nonlinear dynamic response of pile foundations requires the estimation of upward of six parameters pertaining to an inner annular region of weakened soil. This article presents a simplified approach to account for such nonlinear behavior of driven piles by introducing shear-moduli modification factors within the traditional elastic model. The proposed methodology, termed the modified elastic model, is computationally simpler than the traditional nonlinear model and requires significantly fewer parameter estimates. The modified elastic model is validated with nine experimental response curves originating from three test configurations.
- 1 November 2018
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 23 (4)
Modified Elastic Parameters for the Dynamic Axial Impedance of Driven Piles
Experimental investigations reported in the literature have shown that pile foundations exhibit nonlinear behavior when subject to dynamic axial service loads. The nonlinear characteristics are attributed to soil remolding, soil nonlinearity, and pile–soil separation/slippage. The traditional methodology for computing the nonlinear dynamic response of pile foundations requires the estimation of upward of six parameters pertaining to an inner annular region of weakened soil. This article presents a simplified approach to account for such nonlinear behavior of driven piles by introducing shear-moduli modification factors within the traditional elastic model. The proposed methodology, termed the modified elastic model, is computationally simpler than the traditional nonlinear model and requires significantly fewer parameter estimates. The modified elastic model is validated with nine experimental response curves originating from three test configurations.
- 1 July 2018
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 18 (7)
Dynamic Axial Stiffness and Damping Parameters of Tapered Piles
The theoretical models currently reported in the literature idealize a uniformly tapered pile as a step-tapered pile to facilitate dynamic analysis. The step-taper idealization produces approximate solutions, which become more accurate as the number of steps is increased. This paper presents a new theoretical model for obtaining axial stiffness and damping parameters of tapered piles. The underlying theory is consistent with the traditional elastic model for the vertical vibration of cylindrical piles. The governing differential equation for vertical vibration of a uniformly tapered pile is solved numerically using software, and the dynamic response is analyzed; it is observed that the resonant amplitude can be significantly reduced with an increased taper angle. A simple approximate solution is also presented, and the results are in good agreement with the numerical solution. Frequency-dependent axial stiffness and damping parameters of tapered piles can thus be obtained quickly and with sufficient accuracy by implementation of the proposed approximate method.
- 1 July 2018
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 18 (7)
Dynamic Axial Stiffness and Damping Parameters of Tapered Piles
The theoretical models currently reported in the literature idealize a uniformly tapered pile as a step-tapered pile to facilitate dynamic analysis. The step-taper idealization produces approximate solutions, which become more accurate as the number of steps is increased. This paper presents a new theoretical model for obtaining axial stiffness and damping parameters of tapered piles. The underlying theory is consistent with the traditional elastic model for the vertical vibration of cylindrical piles. The governing differential equation for vertical vibration of a uniformly tapered pile is solved numerically using software, and the dynamic response is analyzed; it is observed that the resonant amplitude can be significantly reduced with an increased taper angle. A simple approximate solution is also presented, and the results are in good agreement with the numerical solution. Frequency-dependent axial stiffness and damping parameters of tapered piles can thus be obtained quickly and with sufficient accuracy by implementation of the proposed approximate method.
- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 22 (2)
Explicit Frequency-Dependent Equations for Vertical Vibration of Piles
Practicing engineers generally obtain stiffness and damping coefficients for dynamic design of pile foundations from design charts. The design charts require multiple interpolations and produce approximate frequency-independent coefficients. Explicit expressions consistent with the underlying theory for the vertical vibration of single piles are presented in this technical note. These expressions are easily implemented in a computer program, such as a spreadsheet, for design use. The proposed method preserves the frequency-dependent nature of the dynamic coefficients and enables one to account for the true condition of the pile tip. The effectiveness of the proposed method is illustrated with numerous examples.
- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Practice Periodical on Structural Design and Construction
- Vol. 22 (2)
Explicit Frequency-Dependent Equations for Vertical Vibration of Piles
Practicing engineers generally obtain stiffness and damping coefficients for dynamic design of pile foundations from design charts. The design charts require multiple interpolations and produce approximate frequency-independent coefficients. Explicit expressions consistent with the underlying theory for the vertical vibration of single piles are presented in this technical note. These expressions are easily implemented in a computer program, such as a spreadsheet, for design use. The proposed method preserves the frequency-dependent nature of the dynamic coefficients and enables one to account for the true condition of the pile tip. The effectiveness of the proposed method is illustrated with numerous examples.
- 1 June 2004
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 22 (2) , 187-198
Centrifuge modeling of surface footings on a sand layer underlain by a rigid base
- 1 June 2004
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 22 (2) , 187-198
Centrifuge modeling of surface footings on a sand layer underlain by a rigid base