Igor Olegovich Nafigin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Igor Olegovich Nafigin has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Stepan Andreevich Ustinov
Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry, Russian Academy of Sciences, Moscow, Russia
6 shared publications - Vasily Alexandrovich Minaev
The Institute of Geology of Ore Deposits, Petrography, Mineralogy, and Geochemistry, Russian Academy of Sciences
4 shared publications - Vladislav Alexandrovich Petrov
Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry Russian Academy of Sciences
4 shared publications S. A. Ustinov
Federal State Budgetary Institution Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry of the Russian Academy of Sciences, Moscow, Russia
3 shared publicationsV. A. Petrov
Federal State Budgetary Institution Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry of the Russian Academy of Sciences, Moscow, Russia
3 shared publications- Alexey Svecherevsky
The Institute of Geology of Ore Deposits, Petrography, Mineralogy, and Geochemistry, Russian Academy of Sciences
2 shared publications
Latest Publications
- Open Access
- 20 June 2025
- Published by Geophysical Center of the Russian Academy of Sciences in Russian Journal of Earth Sciences
- Vol. 25 (4) , 1-14
Regional Remote Sensing Analysis of Fault Tectonics in theNorthwestern Part of the Verkhoyan-Kolyma Orogenic Regionand Assessment of Its Role in Ore Formation
The article presents the results of a comprehensive analysis of fault tectonics in the north-western part of the Verkhoyan-Kolyma orogenic region. The studies were performed on a regional scale. Based on a digital relief model, lineaments were identified manually and automatically. The results obtained in combination with literature data allowed us to perform tectonophysical recon-structions using the model of P. L. Hancock (1985). Based on the reconstructions, we determined the expected areas of tectonic structures that had the highest hydraulic activity during collision processes, which are presumably associated with gold deposits and ore occurrences in Eastern Yakutia. Areas promising for the discovery of new ore objects were identified.
- 20 June 2025
- Published by Geophysical Center of the Russian Academy of Sciences in Russian Journal of Earth Sciences
- Vol. 25 (4) , 1-14
Open AccessRegional Remote Sensing Analysis of Fault Tectonics in theNorthwestern Part of the Verkhoyan-Kolyma Orogenic Regionand Assessment of Its Role in Ore Formation
The article presents the results of a comprehensive analysis of fault tectonics in the north-western part of the Verkhoyan-Kolyma orogenic region. The studies were performed on a regional scale. Based on a digital relief model, lineaments were identified manually and automatically. The results obtained in combination with literature data allowed us to perform tectonophysical recon-structions using the model of P. L. Hancock (1985). Based on the reconstructions, we determined the expected areas of tectonic structures that had the highest hydraulic activity during collision processes, which are presumably associated with gold deposits and ore occurrences in Eastern Yakutia. Areas promising for the discovery of new ore objects were identified.
- 27 October 2024
- Published by The Russian Academy of Sciences in Geologiâ rudnyh mestoroždenij
- Vol. 66 (4) , 329-362
Detection and interpretation of central type structures within the territory of southeastern Transbaikalia for prediction of ore-forming systems
Extremely little attention is paid to the issues of detecting and interpreting of central type structures (CTS) when conducting remote structural-geological and structural-geomorphological studies. At the same time, in the 70–80s of the 20th century, the important role of CTSs in the localization of deposits and ore fields was proven. The position of these structures must necessarily be taken into account when solving problems of searching for and predicting mineral resources in the context of metallogenic analysis and reconstruction of the geological history of development of the studied areas. The almost absence of results of mass detecting and interpreting of CTSs can be explained by the still poorly developed methodology for identifying and analyzing this type of structure. In the present study for the territory of southeastern Transbaikalia, based on modern geoinformation technologies, the use of remote sensing data (radar topographic survey) of high resolution, the creation of a digital elevation model and the application of an integrated structural-spatial analysis, an author’s approach to detection and interpretation of the CTSs is presented, including in connection with the localization of ore objects of various geological-industrial (geological-genetic) types within the framework of the concept of the formation of mineral systems. A statistical analysis of the CTSs identified in the area was carried out, which made it possible to establish a smooth increase in the number of structures with a decrease in their diameter. It is shown that the spatial maxima of ore mineralization extent within the territory are concentrated on the periphery of large CTSs and in their immediate vicinity. Most of the known large ore objects are confined to the internal areas of structures less than 10 km in diameter. Based on the approach of constructing model sections, it was possible to reconstruct the deep position of magma chambers associated with the identified CTSs, and, thereby, to determine the probable sources of metal-bearing fluids. A close spatial relationship between the identified magma chambers and deep faults has been established. To determine the most favorable sites for the deposition of ore mineralization, based on structural-spatial criteria, which include not only structural elements of the CTSs, but also segments of known fault structures, weight of evidence models of the territory have been created. The accuracy of the complex model is 89%. Thus, in accordance with the concept of mineral systems, the sources, migration pathways and sites of the most probable deposition of ore mineralization have been reconstructed.
- 27 October 2024
- Published by The Russian Academy of Sciences in Geologiâ rudnyh mestoroždenij
- Vol. 66 (4) , 329-362
Detection and interpretation of central type structures within the territory of southeastern Transbaikalia for prediction of ore-forming systems
Extremely little attention is paid to the issues of detecting and interpreting of central type structures (CTS) when conducting remote structural-geological and structural-geomorphological studies. At the same time, in the 70–80s of the 20th century, the important role of CTSs in the localization of deposits and ore fields was proven. The position of these structures must necessarily be taken into account when solving problems of searching for and predicting mineral resources in the context of metallogenic analysis and reconstruction of the geological history of development of the studied areas. The almost absence of results of mass detecting and interpreting of CTSs can be explained by the still poorly developed methodology for identifying and analyzing this type of structure. In the present study for the territory of southeastern Transbaikalia, based on modern geoinformation technologies, the use of remote sensing data (radar topographic survey) of high resolution, the creation of a digital elevation model and the application of an integrated structural-spatial analysis, an author’s approach to detection and interpretation of the CTSs is presented, including in connection with the localization of ore objects of various geological-industrial (geological-genetic) types within the framework of the concept of the formation of mineral systems. A statistical analysis of the CTSs identified in the area was carried out, which made it possible to establish a smooth increase in the number of structures with a decrease in their diameter. It is shown that the spatial maxima of ore mineralization extent within the territory are concentrated on the periphery of large CTSs and in their immediate vicinity. Most of the known large ore objects are confined to the internal areas of structures less than 10 km in diameter. Based on the approach of constructing model sections, it was possible to reconstruct the deep position of magma chambers associated with the identified CTSs, and, thereby, to determine the probable sources of metal-bearing fluids. A close spatial relationship between the identified magma chambers and deep faults has been established. To determine the most favorable sites for the deposition of ore mineralization, based on structural-spatial criteria, which include not only structural elements of the CTSs, but also segments of known fault structures, weight of evidence models of the territory have been created. The accuracy of the complex model is 89%. Thus, in accordance with the concept of mineral systems, the sources, migration pathways and sites of the most probable deposition of ore mineralization have been reconstructed.
- Open Access
- 12 September 2024
- Published by Geophysical Center of the Russian Academy of Sciences in Russian Journal of Earth Sciences
- Vol. 24 (3) , 1-21
Regional Remote Sensing Analysis of Fault Tectonics of the Kola Peninsula and Its Role in Ore Formation
The results of a comprehensive analysis of fault tectonics of the Kola Peninsula, carried out on a regional scale, are considered. Based on a digital relief model, generalized for various scale levels, lineaments were identified manually and automatically. The results obtained in combination with literature data made it possible to carry out tectonophysical reconstructions using the Hancock model. Based on the results of these reconstructions, the proposed areas of tectonic structures were identified that had the greatest hydraulic activity at the time of the introduction of mafic-ultrabasic massifs and dike complexes of pegmatite belts, which are associated with ore deposits of scarce types of strategic minerals of the Kola Peninsula (copper, nickel, chromium, rare metals, etc.) The areas were identified, promising for the discovery of new ore objects.
- 12 September 2024
- Published by Geophysical Center of the Russian Academy of Sciences in Russian Journal of Earth Sciences
- Vol. 24 (3) , 1-21
Open AccessRegional Remote Sensing Analysis of Fault Tectonics of the Kola Peninsula and Its Role in Ore Formation
The results of a comprehensive analysis of fault tectonics of the Kola Peninsula, carried out on a regional scale, are considered. Based on a digital relief model, generalized for various scale levels, lineaments were identified manually and automatically. The results obtained in combination with literature data made it possible to carry out tectonophysical reconstructions using the Hancock model. Based on the results of these reconstructions, the proposed areas of tectonic structures were identified that had the greatest hydraulic activity at the time of the introduction of mafic-ultrabasic massifs and dike complexes of pegmatite belts, which are associated with ore deposits of scarce types of strategic minerals of the Kola Peninsula (copper, nickel, chromium, rare metals, etc.) The areas were identified, promising for the discovery of new ore objects.
- 28 August 2024
- Published by Pleiades Publishing Ltd in Geology of Ore Deposits
- Vol. 66 (4) , 345-375
Detection and Interpretation of Central Type Structures within the Territory of Southeastern Transbaikalia for Prediction of Ore-Forming Systems
Extremely little attention is paid to the issues of detecting and interpreting of central type structures (CTSs) when conducting remote structural-geological and structural-geomorphological studies. At the same time, in the 1970–1980s, it was proven that CTSs play an important role in the localization of deposits and ore fields. The position of these structures must necessarily be taken into account when solving problems of searching for and predicting mineral resources in the context of metallogenic analysis and reconstruction of the geological history of development of the studied areas. The almost complete absence of results of mass detection and interpreting of CTSs can be explained by the still poorly developed methodology for identifying and analyzing this type of structure. In the present study for the territory of Southeastern Transbaikalia, based on modern geoinformation technologies, the use of remote sensing data (radar topographic survey) of high resolution, the creation of a digital elevation model, and the application of an integrated structural-spatial analysis, an author’s approach to detection and interpretation of the CTSs is presented, including in connection with the localization of ore objects of various geological-industrial (geological-genetic) types within the framework of the concept of the formation of mineral systems. A statistical analysis of the CTSs identified in the area was carried out, which made it possible to establish a smooth increase in the number of structures with a decrease in their diameter. It is shown that the spatial maxima of ore mineralization extent within the territory are concentrated on the periphery of large CTSs and in their immediate vicinity. Most of the known large ore objects are confined to the internal areas of structures less than 10 km in diameter. Based on the approach of constructing model sections, it was possible to reconstruct the deep position of magma chambers associated with the identified CTSs, and, thereby, to determine the probable sources of metal-bearing fluids. A close spatial relationship between the identified magma chambers and deep faults has been established. To determine the most favorable sites for the deposition of ore mineralization, based on structural-spatial criteria, which include not only structural elements of the CTSs, but also segments of known fault structures, weight of evidence models of the territory have been created. The accuracy of the complex model is 89%. Thus, in accordance with the concept of mineral systems, the sources, migration pathways, and sites of the most probable deposition of ore mineralization have been reconstructed.
- 28 August 2024
- Published by Pleiades Publishing Ltd in Geology of Ore Deposits
- Vol. 66 (4) , 345-375
Detection and Interpretation of Central Type Structures within the Territory of Southeastern Transbaikalia for Prediction of Ore-Forming Systems
Extremely little attention is paid to the issues of detecting and interpreting of central type structures (CTSs) when conducting remote structural-geological and structural-geomorphological studies. At the same time, in the 1970–1980s, it was proven that CTSs play an important role in the localization of deposits and ore fields. The position of these structures must necessarily be taken into account when solving problems of searching for and predicting mineral resources in the context of metallogenic analysis and reconstruction of the geological history of development of the studied areas. The almost complete absence of results of mass detection and interpreting of CTSs can be explained by the still poorly developed methodology for identifying and analyzing this type of structure. In the present study for the territory of Southeastern Transbaikalia, based on modern geoinformation technologies, the use of remote sensing data (radar topographic survey) of high resolution, the creation of a digital elevation model, and the application of an integrated structural-spatial analysis, an author’s approach to detection and interpretation of the CTSs is presented, including in connection with the localization of ore objects of various geological-industrial (geological-genetic) types within the framework of the concept of the formation of mineral systems. A statistical analysis of the CTSs identified in the area was carried out, which made it possible to establish a smooth increase in the number of structures with a decrease in their diameter. It is shown that the spatial maxima of ore mineralization extent within the territory are concentrated on the periphery of large CTSs and in their immediate vicinity. Most of the known large ore objects are confined to the internal areas of structures less than 10 km in diameter. Based on the approach of constructing model sections, it was possible to reconstruct the deep position of magma chambers associated with the identified CTSs, and, thereby, to determine the probable sources of metal-bearing fluids. A close spatial relationship between the identified magma chambers and deep faults has been established. To determine the most favorable sites for the deposition of ore mineralization, based on structural-spatial criteria, which include not only structural elements of the CTSs, but also segments of known fault structures, weight of evidence models of the territory have been created. The accuracy of the complex model is 89%. Thus, in accordance with the concept of mineral systems, the sources, migration pathways, and sites of the most probable deposition of ore mineralization have been reconstructed.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Izvestiya, Atmospheric and Oceanic Physics
- Vol. 59 (9) , 1220-1238
Assessing the Suitability of Territories for Detailed Geological and Mineralogical Mapping Based on Statistical Methods for Processing Remote Sensing Data from the Landsat-8 Spacecraft: Using the Example of Southeastern Zabaykalsky Krai, Russia
This paper considers the suitability of using multispectral remote sensing data from the Landsat-8 satellite for conducting regional geological and mineralogical mapping of the territory of southeastern Zabaykalsky krai (Russia) under conditions of medium–low mountain relief and continental climate. To increase the spectral information content of Landsat-8 satellite data, statistical processing algorithms are used, including principal component analysis (PCA), minimum noise fraction (MNF), and independent component analysis (ICA). Statistical processing results are compared with the classes of geological materials: minerals of the oxide/hydroxide group containing transitional iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing Al-OH and Fe, Mg-OH; and minerals containing divalent iron ion (Fe2+) and vegetation cover. Pseudocolor RGB composites are generated and interpreted, reflecting the distribution and multiplication of classes of geological materials. To build a prospectivity scheme for the discovery of the minerals, the integration of informative thematic layers is carried out using a fuzzy logic model. The resulting scheme is compared with geological information, and positive conclusions are made about the suitability of territory for further remote studies on mapping hydrothermally altered zones and hypergenesis products in order to localize areas that are promising for revealing hydrothermal–metasomatic mineralization.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Izvestiya, Atmospheric and Oceanic Physics
- Vol. 59 (9) , 1220-1238
Assessing the Suitability of Territories for Detailed Geological and Mineralogical Mapping Based on Statistical Methods for Processing Remote Sensing Data from the Landsat-8 Spacecraft: Using the Example of Southeastern Zabaykalsky Krai, Russia
This paper considers the suitability of using multispectral remote sensing data from the Landsat-8 satellite for conducting regional geological and mineralogical mapping of the territory of southeastern Zabaykalsky krai (Russia) under conditions of medium–low mountain relief and continental climate. To increase the spectral information content of Landsat-8 satellite data, statistical processing algorithms are used, including principal component analysis (PCA), minimum noise fraction (MNF), and independent component analysis (ICA). Statistical processing results are compared with the classes of geological materials: minerals of the oxide/hydroxide group containing transitional iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing Al-OH and Fe, Mg-OH; and minerals containing divalent iron ion (Fe2+) and vegetation cover. Pseudocolor RGB composites are generated and interpreted, reflecting the distribution and multiplication of classes of geological materials. To build a prospectivity scheme for the discovery of the minerals, the integration of informative thematic layers is carried out using a fuzzy logic model. The resulting scheme is compared with geological information, and positive conclusions are made about the suitability of territory for further remote studies on mapping hydrothermally altered zones and hypergenesis products in order to localize areas that are promising for revealing hydrothermal–metasomatic mineralization.
- 1 March 2023
- Published by The Russian Academy of Sciences in Issledovanie Zemli iz Kosmosa
- Vol. 2023 (2) , 61-83
Territory Suitability Assessment for Conducting Detailed Geological and Mineralogical Mapping Based on Statistical Methods of Remote Sensing Data Processing Landsat-8: A Case Study in the Southeastern Transbaikalia, Russia
The work considers the suitability of using multispectral satellite remote sensing data Landsat-8 for conducting regional geological and mineralogical mapping of the territory of south-eastern Transbaikalia (Russia) in conditions of medium- low-mountain relief and continental climate. The territory was chosen as the object of study due to its diverse metallogenic specialization (Au, U, Mo, Pb-Zn, Sn, W, Ta, Nb, Li, fluorite). Diversity in composition and age of ore-bearing massifs of intrusive, volcanogenic and sedimentary rocks are also of interest. Statistical processing algorithms to increase spectral information content of satellite data Landsat-8 were used; they include: principal component analysis (PCA); minimum noise fraction (MNF) and independent component analysis (ICA). Eigenvector matrices analysed on the basis of statistical processing results and two-dimensional correlation graphs were built to compare thematic layers with geological material classes: oxide/hydroxide group minerals containing transition iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing A1–OH and Fe, Mg–OH; minerals containing Fe2+ and vegetation cover. Pseudo-coloured RGB composites representing the distribution and multiplication of geological materials classes was generated and interpreted. Integration of informative thematic layers with using fuzzy logic model was carried out to construct a prospectivity map. Received map was compared with geological information, and positive conclusions about territory suitability for further remote mapping research of hydrothermally altered zones and hypergenesis products in order to localize areas promising for identifying hydrothermal-metasomatic mineralization were made.
- 1 March 2023
- Published by The Russian Academy of Sciences in Issledovanie Zemli iz Kosmosa
- Vol. 2023 (2) , 61-83
Territory Suitability Assessment for Conducting Detailed Geological and Mineralogical Mapping Based on Statistical Methods of Remote Sensing Data Processing Landsat-8: A Case Study in the Southeastern Transbaikalia, Russia
The work considers the suitability of using multispectral satellite remote sensing data Landsat-8 for conducting regional geological and mineralogical mapping of the territory of south-eastern Transbaikalia (Russia) in conditions of medium- low-mountain relief and continental climate. The territory was chosen as the object of study due to its diverse metallogenic specialization (Au, U, Mo, Pb-Zn, Sn, W, Ta, Nb, Li, fluorite). Diversity in composition and age of ore-bearing massifs of intrusive, volcanogenic and sedimentary rocks are also of interest. Statistical processing algorithms to increase spectral information content of satellite data Landsat-8 were used; they include: principal component analysis (PCA); minimum noise fraction (MNF) and independent component analysis (ICA). Eigenvector matrices analysed on the basis of statistical processing results and two-dimensional correlation graphs were built to compare thematic layers with geological material classes: oxide/hydroxide group minerals containing transition iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing A1–OH and Fe, Mg–OH; minerals containing Fe2+ and vegetation cover. Pseudo-coloured RGB composites representing the distribution and multiplication of geological materials classes was generated and interpreted. Integration of informative thematic layers with using fuzzy logic model was carried out to construct a prospectivity map. Received map was compared with geological information, and positive conclusions about territory suitability for further remote mapping research of hydrothermally altered zones and hypergenesis products in order to localize areas promising for identifying hydrothermal-metasomatic mineralization were made.
- Open Access
- 28 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (15) , 9242
Geological and Mineralogical Mapping Based on Statistical Methods of Remote Sensing Data Processing of Landsat-8: A Case Study in the Southeastern Transbaikalia, Russia
The work considers the suitability of using multispectral satellite remote sensing data Landsat-8 for conducting regional geological and mineralogical mapping of the territory of south-eastern Transbaikalia (Russia) based on statistical methods for processing remote sensing data in conditions of medium–low-mountain relief and continental climate. The territory was chosen as the object of study due to its diverse metallogenic specialization (Au, U, Mo, Pb-Zn, Sn, W, Ta, Nb, Li, fluorite). Diversity in composition and age of ore-bearing massifs of intrusive, volcanogenic, and sedimentary rocks are also of interest. The work describes the initial data and considers the procedure for their pre-processing, including radiometric and atmospheric correction. Statistical processing algorithms to increase spectral information content of satellite data Landsat-8 were used. They include: principal component analysis, minimum noise fraction, and independent component analysis. Eigenvector matrices analyzed on the basis of statistical processing results and two-dimensional correlation graphs were built to compare thematic layers with geological material classes: oxide/hydroxide group minerals containing transition iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing A1-OH and Fe, Mg-OH; and minerals containing Fe2+ and vegetation cover. Pseudo-colored RGB composites representing the distribution and multiplication of geological material classes are generated and interpreted according to the results of statistical methods. Integration of informative thematic layers using a fuzzy logic model was carried out to construct a prediction scheme for detecting hydrothermal mineralization. The received schema was compared with geological information, and positive conclusions about territory suitability for further remote mapping research of hydrothermally altered zones and hypergenesis products in order to localize areas promising for identifying hydrothermal metasomatic mineralization were made.
- 28 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (15) , 9242
Open AccessGeological and Mineralogical Mapping Based on Statistical Methods of Remote Sensing Data Processing of Landsat-8: A Case Study in the Southeastern Transbaikalia, Russia
The work considers the suitability of using multispectral satellite remote sensing data Landsat-8 for conducting regional geological and mineralogical mapping of the territory of south-eastern Transbaikalia (Russia) based on statistical methods for processing remote sensing data in conditions of medium–low-mountain relief and continental climate. The territory was chosen as the object of study due to its diverse metallogenic specialization (Au, U, Mo, Pb-Zn, Sn, W, Ta, Nb, Li, fluorite). Diversity in composition and age of ore-bearing massifs of intrusive, volcanogenic, and sedimentary rocks are also of interest. The work describes the initial data and considers the procedure for their pre-processing, including radiometric and atmospheric correction. Statistical processing algorithms to increase spectral information content of satellite data Landsat-8 were used. They include: principal component analysis, minimum noise fraction, and independent component analysis. Eigenvector matrices analyzed on the basis of statistical processing results and two-dimensional correlation graphs were built to compare thematic layers with geological material classes: oxide/hydroxide group minerals containing transition iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing A1-OH and Fe, Mg-OH; and minerals containing Fe2+ and vegetation cover. Pseudo-colored RGB composites representing the distribution and multiplication of geological material classes are generated and interpreted according to the results of statistical methods. Integration of informative thematic layers using a fuzzy logic model was carried out to construct a prediction scheme for detecting hydrothermal mineralization. The received schema was compared with geological information, and positive conclusions about territory suitability for further remote mapping research of hydrothermally altered zones and hypergenesis products in order to localize areas promising for identifying hydrothermal metasomatic mineralization were made.
- Open Access
- 10 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 2864
Prospects of Geoinformatics in Analyzing Spatial Heterogeneities of Microstructural Properties of a Tectonic Fault
The paper proposes a special technique for microstructural analysis (STMA) of rock samples based on two provisions. The first one is an algorithm for the automatic detection and digitalization of microstructures in images of oriented thin sections. The second one utilizes geographic information system (GIS) tools for an automatized analysis of objects at the micro scale. Using STMA allows the establishment of geometric features of fissure and pore space of rock samples to determine the parameters of stress–strain fields at different stages of rock massif deformation and to establish a relationship between microstructures and macrostructures. STMA makes it possible to evaluate the spatial heterogeneity of physical and structural properties of rocks at the micro scale. Verification of STMA was carried out using 15 rock samples collected across the core of the Primorsky Fault of the Baikal Rift Zone. Petrographic data were compared to the quantitative parameters of microfracture networks. The damage zone of the Primorsky Fault includes three clusters characterized by different porosity, permeability, and deformation type. Findings point to the efficiency of STMA in revealing the spatial heterogeneity of a tectonic fault.
- 10 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 2864
Open AccessProspects of Geoinformatics in Analyzing Spatial Heterogeneities of Microstructural Properties of a Tectonic Fault
The paper proposes a special technique for microstructural analysis (STMA) of rock samples based on two provisions. The first one is an algorithm for the automatic detection and digitalization of microstructures in images of oriented thin sections. The second one utilizes geographic information system (GIS) tools for an automatized analysis of objects at the micro scale. Using STMA allows the establishment of geometric features of fissure and pore space of rock samples to determine the parameters of stress–strain fields at different stages of rock massif deformation and to establish a relationship between microstructures and macrostructures. STMA makes it possible to evaluate the spatial heterogeneity of physical and structural properties of rocks at the micro scale. Verification of STMA was carried out using 15 rock samples collected across the core of the Primorsky Fault of the Baikal Rift Zone. Petrographic data were compared to the quantitative parameters of microfracture networks. The damage zone of the Primorsky Fault includes three clusters characterized by different porosity, permeability, and deformation type. Findings point to the efficiency of STMA in revealing the spatial heterogeneity of a tectonic fault.
- Open Access
- 16 August 2018
- Published by Sergo Ordshonikidze University in Proceedings of higher educational establishments. Geology and Exploration
- No. 4,p. 61-67
THREE-DIMENSIONAL GIS MODELING OF THE STRELTSOVSKAYA CALDERA’S COVER ON THE BASIS OF SURFACE RELIEF AND THE BASEMENT’S TOP DIGITAL MODELS
На основе рассмотрения и анализа различных подходов к получению данных для построения цифровой модели рельефа и типов трёхмерного представления поверхностей обоснован выбор наиболее оптимальной методики для построения и визуализации трёхмерной модели вулканогенно-осадочного чехла Стрельцовской кальдеры в Восточном Забайкалье. Создание подобной модели определяется необходимостью обнаружения, идентификации и мониторинга процессов, явлений и факторов природного и техногенного происхождения на урановых месторождениях Стрельцовского рудного поля, отрабатываемых подземным способом в сложных горно-геологических условиях. Для решения поставленной задачи на основе данных дистанционного зондирования, геофизических исследований, результатов векторизации и обработки картографических материалов проводилось моделирование рельефа дневной поверхности и кровли фундамента. Пространство, заключённое между построенными поверхностями за счёт алгоритма создания замкнутого каркаса из поверхностей преобразовано в новый объект, представляющий собой трёхмерную объёмную модель вулканогенно-осадочного чехла кальдеры. Полученные результаты позволят создать прогнозную модель тектонодинамического состояния массивов горных пород Стрельцовского рудного поля при отработке месторождений и проектировании горных выработок.
- 16 August 2018
- Published by Sergo Ordshonikidze University in Proceedings of higher educational establishments. Geology and Exploration
- No. 4,p. 61-67
Open AccessTHREE-DIMENSIONAL GIS MODELING OF THE STRELTSOVSKAYA CALDERA’S COVER ON THE BASIS OF SURFACE RELIEF AND THE BASEMENT’S TOP DIGITAL MODELS
На основе рассмотрения и анализа различных подходов к получению данных для построения цифровой модели рельефа и типов трёхмерного представления поверхностей обоснован выбор наиболее оптимальной методики для построения и визуализации трёхмерной модели вулканогенно-осадочного чехла Стрельцовской кальдеры в Восточном Забайкалье. Создание подобной модели определяется необходимостью обнаружения, идентификации и мониторинга процессов, явлений и факторов природного и техногенного происхождения на урановых месторождениях Стрельцовского рудного поля, отрабатываемых подземным способом в сложных горно-геологических условиях. Для решения поставленной задачи на основе данных дистанционного зондирования, геофизических исследований, результатов векторизации и обработки картографических материалов проводилось моделирование рельефа дневной поверхности и кровли фундамента. Пространство, заключённое между построенными поверхностями за счёт алгоритма создания замкнутого каркаса из поверхностей преобразовано в новый объект, представляющий собой трёхмерную объёмную модель вулканогенно-осадочного чехла кальдеры. Полученные результаты позволят создать прогнозную модель тектонодинамического состояния массивов горных пород Стрельцовского рудного поля при отработке месторождений и проектировании горных выработок.