Ali Sahaf
Research Subjects
Ali Sahaf has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Ali Abdoli
Department of Civil Engineering
2 shared publicationsAbolfazl Mohamadzadeh Moghaddam
Department of Civil Engineering
1 shared publicationAbolfazl Mohammadzadeh Moghaddam
1 shared publication- Abolfazl Mohammadzadeh Moghaddam
Department of Civil Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Razavi Khorasan, Iran
1 shared publication Alireza Razazpor
Faculty of Engineering Department of Civil Engineering Ferdowsi University of Mashhad Iran
1 shared publicationAref Delarami
1 shared publication
Latest Publications
- Open Access
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
3D Sight Distance Calculation and Estimation of its Effect on Road Accidents in GIS Environment
Nowadays, one of the main causes of human death is driving accidents. Across the world 1.2 million people die and several million people get injured annually as a result of road accidents. One of the main solutions that is important in resolving the problem of accidents is identifying the factors and their role and impact and the contribution of each in the accident. The stopping sight distance in the route is one of the initial factors in the driver’s performance error as well as the occurrence of an accident, financial losses, and deaths. The geometric design of roads is generally designed according to two‐dimensional rules and regulations. Hence, today, given the remarkable advances in computer science and programming, there are many possibilities for 3D modeling of the route. Therefore, the calculation of the stopping sight distance should be based on existing facts and new scientific achievements. On the contrary, the stopping sight distance is one of the factors affecting driving crashes; therefore, this paper tries to investigate the accident occurrence probability in other spots of the existing route by calculating 3D stopping sight distance and using drivers’ free flow speed, as well as using the GIS software. In this way, the results of this study can pave the way for improving the geometric design of existing roads as well as prioritizing the correction of the accidental points of existing routes.
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Open Access3D Sight Distance Calculation and Estimation of its Effect on Road Accidents in GIS Environment
Nowadays, one of the main causes of human death is driving accidents. Across the world 1.2 million people die and several million people get injured annually as a result of road accidents. One of the main solutions that is important in resolving the problem of accidents is identifying the factors and their role and impact and the contribution of each in the accident. The stopping sight distance in the route is one of the initial factors in the driver’s performance error as well as the occurrence of an accident, financial losses, and deaths. The geometric design of roads is generally designed according to two‐dimensional rules and regulations. Hence, today, given the remarkable advances in computer science and programming, there are many possibilities for 3D modeling of the route. Therefore, the calculation of the stopping sight distance should be based on existing facts and new scientific achievements. On the contrary, the stopping sight distance is one of the factors affecting driving crashes; therefore, this paper tries to investigate the accident occurrence probability in other spots of the existing route by calculating 3D stopping sight distance and using drivers’ free flow speed, as well as using the GIS software. In this way, the results of this study can pave the way for improving the geometric design of existing roads as well as prioritizing the correction of the accidental points of existing routes.
- Open Access
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Calculating TIN‐Based 3D Sight Distance and Its Evaluation on Drivers Free‐Flow Speed
Sight distance during driving may be limited by side factors such as mountain slopes or trees and buildings in horizontal curves and by the dome of the arc in vertical curves, and the night vision also can be limited in the sag vertical curves by the vehicle’s light. Analyzing driver’s sight distance in the road is very important for traffic safety. In this regard, in order to help the designer, the current rules and guidelines propose the two‐dimensional analysis model for the sight distance. In this analysis, the sight distance is calculated separately in the combination of horizontal and vertical curves, and the smallest amount is considered as the sight distance. While, after constructing and operating the road, drivers control their vehicle according to the conditions in their 3D space. Nowadays, given the remarkable advances in computer science, there are many possibilities for 3D modeling of the route. In this research, the goal is to calculate the three‐dimensional stopping sight distance at each spatial point by computer modeling the existing roads. The speed of various drivers with conventional riding vehicles under free traffic conditions was obtained by a GPS device. The results showed that, in places such as curves, given the provision of sufficient stopping sight distance, driver’s free‐flow speed reduces. Thus, another factor affecting the speed of the drivers is the curvature change rate. Finally, using nonlinear regression modeling a logical relationship was determined and extracted between the three factors of driver’s free‐flow speed, 3D stopping sight distance, and curvature change rate of the path.
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Open AccessCalculating TIN‐Based 3D Sight Distance and Its Evaluation on Drivers Free‐Flow Speed
Sight distance during driving may be limited by side factors such as mountain slopes or trees and buildings in horizontal curves and by the dome of the arc in vertical curves, and the night vision also can be limited in the sag vertical curves by the vehicle’s light. Analyzing driver’s sight distance in the road is very important for traffic safety. In this regard, in order to help the designer, the current rules and guidelines propose the two‐dimensional analysis model for the sight distance. In this analysis, the sight distance is calculated separately in the combination of horizontal and vertical curves, and the smallest amount is considered as the sight distance. While, after constructing and operating the road, drivers control their vehicle according to the conditions in their 3D space. Nowadays, given the remarkable advances in computer science, there are many possibilities for 3D modeling of the route. In this research, the goal is to calculate the three‐dimensional stopping sight distance at each spatial point by computer modeling the existing roads. The speed of various drivers with conventional riding vehicles under free traffic conditions was obtained by a GPS device. The results showed that, in places such as curves, given the provision of sufficient stopping sight distance, driver’s free‐flow speed reduces. Thus, another factor affecting the speed of the drivers is the curvature change rate. Finally, using nonlinear regression modeling a logical relationship was determined and extracted between the three factors of driver’s free‐flow speed, 3D stopping sight distance, and curvature change rate of the path.
- 1 December 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 229
The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture
- 1 December 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 229
The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture
- Open Access
- 1 December 2019
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 11, e00265
Investigation of the fatigue characteristics of warm stone matrix asphalt (WSMA) containing electric arc furnace (EAF) steel slag as coarse aggregate and Sasobit as warm mix additive
- 1 December 2019
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 11, e00265
Open AccessInvestigation of the fatigue characteristics of warm stone matrix asphalt (WSMA) containing electric arc furnace (EAF) steel slag as coarse aggregate and Sasobit as warm mix additive
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 225, 812-828
Evaluation of the mixed mode (I/II) fracture toughness of cement emulsified asphalt mortar (CRTS-II) using mixture design of experiments
- 1 November 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 225, 812-828
Evaluation of the mixed mode (I/II) fracture toughness of cement emulsified asphalt mortar (CRTS-II) using mixture design of experiments
- Open Access
- 4 February 2016
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 10 (5) , 194
Examining the Impact of Micro Silica Gel Additive on the Compressive Strength and Water Absorption of Roller Compacted Concrete Pavement
Roller compacted concrete pavement (RCCP) is one of the different types of concrete pavements which is considered as a new developing technology due to its rapid installation. However, RCCP is difficult to install in high thickness; therefore, it is essential to reduce the thickness of pavement while maintaining strength. Flexural strength and fatigue resistance are the most important parameters effective on design of thick pavements. These parameters are directly related to uniaxial compressive strength of concrete. Hence, this study determines and evaluates the compressive strength of 7-day and 28-day specimens. Given the durability of concrete pavements, particularly their penetrability against water, corrosive materials and minerals, the most important parameter is to reduce water absorption of RCCP. In order to increase strength and reduce water absorption of RCCP, different additives as well as a proper mix design can be significantly effective. This study examines the effect of various mix designs and different percentages of micro silica gel on RCCP. The suggested mix design is continuous aggregation and addition of 7% micro silica gel, which increases strength and durability of RCCP.
- 4 February 2016
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 10 (5) , 194
Open AccessExamining the Impact of Micro Silica Gel Additive on the Compressive Strength and Water Absorption of Roller Compacted Concrete Pavement
Roller compacted concrete pavement (RCCP) is one of the different types of concrete pavements which is considered as a new developing technology due to its rapid installation. However, RCCP is difficult to install in high thickness; therefore, it is essential to reduce the thickness of pavement while maintaining strength. Flexural strength and fatigue resistance are the most important parameters effective on design of thick pavements. These parameters are directly related to uniaxial compressive strength of concrete. Hence, this study determines and evaluates the compressive strength of 7-day and 28-day specimens. Given the durability of concrete pavements, particularly their penetrability against water, corrosive materials and minerals, the most important parameter is to reduce water absorption of RCCP. In order to increase strength and reduce water absorption of RCCP, different additives as well as a proper mix design can be significantly effective. This study examines the effect of various mix designs and different percentages of micro silica gel on RCCP. The suggested mix design is continuous aggregation and addition of 7% micro silica gel, which increases strength and durability of RCCP.
- Open Access
- 31 July 2014
- Published by Academic Journals in Journal of Civil Engineering and Construction Technology
- Vol. 5 (4) , 30-34
Effect of stiffness modulus and dynamic loading on pavement subgrade
An optimum pavement structure design requires characterization of materials under traffic loading. Investigation of stress-strain relationship of materials, under traffic loading is advised to determine the appropriate stiffness modulus. Since stiffness modulus is extensively dependent to loading dynamics, the loading parameters in the laboratory testing condition should simulate the field condition as close as possible. In this paper, the importance of accurate determination of stiffness modulus was discussed. Significant loading parameters including loading waveform, loading time, and rest time were expressed in subgrade layer. It was demonstrated that for subgrade layer; haversine loading waveform can better present what practically occurs in the field compared to the square waveform. Furthermore, for this layer, the effect of loading time is intensified due to the increase in depth and decrease in the quality of materials. In addition, because of elasto-plastic nature of subgrade material, the rest period should be considered in determination of stiffness modulus. Key words: Stiffness modulus, dynamic loading, subgrade layer.
- 31 July 2014
- Published by Academic Journals in Journal of Civil Engineering and Construction Technology
- Vol. 5 (4) , 30-34
Open AccessEffect of stiffness modulus and dynamic loading on pavement subgrade
An optimum pavement structure design requires characterization of materials under traffic loading. Investigation of stress-strain relationship of materials, under traffic loading is advised to determine the appropriate stiffness modulus. Since stiffness modulus is extensively dependent to loading dynamics, the loading parameters in the laboratory testing condition should simulate the field condition as close as possible. In this paper, the importance of accurate determination of stiffness modulus was discussed. Significant loading parameters including loading waveform, loading time, and rest time were expressed in subgrade layer. It was demonstrated that for subgrade layer; haversine loading waveform can better present what practically occurs in the field compared to the square waveform. Furthermore, for this layer, the effect of loading time is intensified due to the increase in depth and decrease in the quality of materials. In addition, because of elasto-plastic nature of subgrade material, the rest period should be considered in determination of stiffness modulus. Key words: Stiffness modulus, dynamic loading, subgrade layer.