Jing Xiong

A stereolithography process with thermal assistance is proposed in this work to address the tradeoff between the flowability and the high concentration of solute loadings at room temperature, through which the improved performance of polymers prepared using stereolithography 3D printing can be achieved. For the experiment, polyethylene glycol diacrylate (PEGDA) with a high molecular weight of 4000 is adopted to improve the mechanical properties of 2-Hydroxyethyl methacrylate (HEMA). For the polymer of HEMA, the highest soluble concentration of PEGDA is about 20 wt% at 25 °C (room temperature) while the concentration could be raised up to 40 wt% as the temperature increases to 60 °C. The 3D printing tests showed that the objects could be easily fabricated with the HEMA polymer loaded with 40 wt% of PEGDA through the thermally assisted projection stereolithography technology. By adding the 40 wt% of PEGDA, the Young’s modulus has been enhanced by nearly 390% compared to the HEMA resin without solute, of which the Young’s modulus is 63.31 ± 2.72 MPa. The results of the cell proliferation test proved that the HEMA resin loaded with PEGDA led to a better biocompatibility compared to the HEMA resin without the loading of the PEGDA solute. All of the results demonstrate that the polymer loaded with high solute is feasible to be precisely 3D-printed using the projection stereolithography process with thermal assistance, and the improved mechanical properties are beneficial for biomedical applications.

Drought stress is known to significantly limit crop growth and productivity. Lateral organ boundary domain (LBD) transcription factors—particularly class-I members—play essential roles in plant development and biotic stress. However, little information is available on class-II LBD genes related to abiotic stress in maize. Here, we cloned a maize class-II LBD transcription factor, ZmLBD5, and identified its function in drought stress. Transient expression, transactivation, and dimerization assays demonstrated that ZmLBD5 was localized in the nucleus, without transactivation, and could form a homodimer or heterodimer. Promoter analysis demonstrated that multiple drought-stress-related and ABA response cis-acting elements are present in the promoter region of ZmLBD5. Overexpression of ZmLBD5 in Arabidopsis promotes plant growth under normal conditions, and suppresses drought tolerance under drought conditions. Furthermore, the overexpression of ZmLBD5 increased the water loss rate, stomatal number, and stomatal apertures. DAB and NBT staining demonstrated that the reactive oxygen species (ROS) decreased in ZmLBD5-overexpressed Arabidopsis. A physiological index assay also revealed that SOD and POD activities in ZmLBD5-overexpressed Arabidopsis were higher than those in wild-type Arabidopsis. These results revealed the role of ZmLBD5 in drought stress by regulating ROS levels.

It has long been considered that mechanical impedance on root will restrict root elongation and consequently promote radial growth. However, we did observe radial expansion but not elongation restriction in maize seedlings after short growth in sands. Mechanical impedance of soil can be classified into frontal- and lateral-type based on the interaction site of root. Therefore, we suspected that radial expansion might be mainly stimulated by lateral rather than frontal impedance. To verify our speculation, frontal and lateral impedance was provided separately. Small plastic caps were used to provide unique frontal impedance on root tip and cylindrical plastic containers were used to provide lateral impedance. Plastic caps could reduce root length remarkably. However, the radial expansion of plastic-cap-fitted roots was significantly inferior to that of the sand-cultured roots. Microstructural analysis revealed that sand-condition thickened root largely dependents on cortical expansion, whereas plastic cap did it mainly by thickening stele. In cylindrical plastic containers, mechanical impedance came only from the lateral direction and promoted the expansion of cortex just as sand-condition. Thus, we proposed that the expansion of the cortex and the consequent radial growth is mainly due to lateral impedance when growing in sands.