Arun Kishor Johar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Arun Kishor Johar has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
Dharmendar Boolchandani
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology Jaipur, Jaipur, India
10 shared publicationsTangudu Bharat Kumar
MNIT Jaipur: Malaviya National Institute of Technology
8 shared publicationsAjay Agarwal
Department of Electrical Engineering, Indian Institute of Technology, Jodhpur, India
7 shared publications- Gaurav Kumar Sharma
Malaviya National Institute of Technology, Jaipur, India
7 shared publications C. Periasamy
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology Jaipur, Jaipur, India
6 shared publications- Tarun Varma
Department of Electronics and Communication Engineering, Malaviya National Institute of Technology, Jaipur, India
6 shared publications
Latest Publications
- 1 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (12) , 125021
Dielectric modulated a-IGZO TFT biosensor: a cost-effective design for enhanced biomolecule detection
This paper introduces a low-cost Dielectric Modulated a-IGZO Nanostructured Thin-Film Transistor (DM-IGZO-TFT) biosensor for the detection of several biomolecules such as Uricase, Urease, Streptavidin, and Biotin, Cholesterol Oxidase, and Zein. The proposed DM-IGZO-TFT biosensor has been simulated and analysed using the TCAD Silvaco simulator. The electrostatic behavior of the biosensor is extensively investigated, including the effects of varying charge densities. The performance of the DM-IGZO-TFT device is assessed by threshold voltage sensitivity ( S V th ), drain current sensitivity ( S I DS ), and transconductance sensitivity ( S g m ). The biosensor, when exposed to various biomolecules, exhibits an increase in these sensitivity metrics. It is reported that with the biomolecule shifting from Uricase (k = 1.54) to Zein (k = 5), the S V th increases from 31.01% to 66.18%, S I DS increases from 46.94% to 116.31%, and S g m increases 27.60% to 88.16%. The findings of this study reveal that the DM-IGZO-TFT biosensor can contribute to advancements in biosensing technology.
- 1 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (12) , 125021
Dielectric modulated a-IGZO TFT biosensor: a cost-effective design for enhanced biomolecule detection
This paper introduces a low-cost Dielectric Modulated a-IGZO Nanostructured Thin-Film Transistor (DM-IGZO-TFT) biosensor for the detection of several biomolecules such as Uricase, Urease, Streptavidin, and Biotin, Cholesterol Oxidase, and Zein. The proposed DM-IGZO-TFT biosensor has been simulated and analysed using the TCAD Silvaco simulator. The electrostatic behavior of the biosensor is extensively investigated, including the effects of varying charge densities. The performance of the DM-IGZO-TFT device is assessed by threshold voltage sensitivity ( S V th ), drain current sensitivity ( S I DS ), and transconductance sensitivity ( S g m ). The biosensor, when exposed to various biomolecules, exhibits an increase in these sensitivity metrics. It is reported that with the biomolecule shifting from Uricase (k = 1.54) to Zein (k = 5), the S V th increases from 31.01% to 66.18%, S I DS increases from 46.94% to 116.31%, and S g m increases 27.60% to 88.16%. The findings of this study reveal that the DM-IGZO-TFT biosensor can contribute to advancements in biosensing technology.
- 11 November 2025
- Published by Springer Nature in Silicon
- Vol. 17 (18) , 4319-4329
Photo Sensing Analysis of SiGe Pocket Based Vertical TFET
- 11 November 2025
- Published by Springer Nature in Silicon
- Vol. 17 (18) , 4319-4329
Photo Sensing Analysis of SiGe Pocket Based Vertical TFET
- 13 May 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (7) , 5901-5917
Design and Realization of Novel Dual-Input Logic Gates using Virtual Doped Junctionless Double-Gate TFETs
- 13 May 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (7) , 5901-5917
Design and Realization of Novel Dual-Input Logic Gates using Virtual Doped Junctionless Double-Gate TFETs
- 30 July 2024
- Published by Springer Nature
- p. 221-230
Performance Enhancement of a Film Bulk Acoustic Resonator Using Taguchi DoE and ANOVA Techniques
- 30 July 2024
- Published by Springer Nature
- p. 221-230
Performance Enhancement of a Film Bulk Acoustic Resonator Using Taguchi DoE and ANOVA Techniques
- 12 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085409
Simulation based analysis of HK-Ge-Step-FinFET and its usage as inverter & SRAM
This paper deals with comparative simulation of High-k dielectrics -Germanium Step FinFET (HK-Ge-Step-FinFET) device with reference Step FinFET. For the first time we have investigated the impact of various dimensional parameters like oxide thickness tox, gate length Lg, drain bias voltage Vds on the performance of Proposed and Reference FinFET devices. These FinFET structures have been designed and simulated in Sentaurus TCAD and Cadence Virtuoso. The electrical parameters such as current ratio ION/IOFF, Sub-threshold Swing SS , Drain Induced Barrier Lowering (DIBL), threshold voltage Vth, gate capacitance, intrinsic delay and transconductance are extracted at 10 nm gate length. It is noticed that there is a significant improvement of 28 times and 23 times in ION for proposed device over reference FINFET at Vds = 1 V and Vds = 0.5 V respectively, improvement in ION/IOFF ratio from 8.05 × 108 to 6.65 × 1010, SS of 63.21 mV/decade to 61.5 mV/decade and excellent threshold voltage of 0.18 V in proposed FinFET. The characteristics of the proposed SRAM cell including, static noise margin (SNM), read/write delay, and subthreshold leakage power, are compared with the conventional 6 T SRAM cells. It is reported that the FinFET SRAM cell has RSNM, HSNM, and WNM of 285 mV, 360 mV, and 302 mV, respectively, at Vds = 1 V. Furthermore, the suggested device-based SRAM cell outperforms traditional SRAM cells at 1.0 V in terms of read noise margin, hold noise margin, and write noise margin, as well as leakage power. Thus, it may prove to be a viable option for lowering leakage components, making it effective for low-power and high-performance inverter and SRAM cell design in the nanoscale regime.
- 12 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085409
Simulation based analysis of HK-Ge-Step-FinFET and its usage as inverter & SRAM
This paper deals with comparative simulation of High-k dielectrics -Germanium Step FinFET (HK-Ge-Step-FinFET) device with reference Step FinFET. For the first time we have investigated the impact of various dimensional parameters like oxide thickness tox, gate length Lg, drain bias voltage Vds on the performance of Proposed and Reference FinFET devices. These FinFET structures have been designed and simulated in Sentaurus TCAD and Cadence Virtuoso. The electrical parameters such as current ratio ION/IOFF, Sub-threshold Swing SS , Drain Induced Barrier Lowering (DIBL), threshold voltage Vth, gate capacitance, intrinsic delay and transconductance are extracted at 10 nm gate length. It is noticed that there is a significant improvement of 28 times and 23 times in ION for proposed device over reference FINFET at Vds = 1 V and Vds = 0.5 V respectively, improvement in ION/IOFF ratio from 8.05 × 108 to 6.65 × 1010, SS of 63.21 mV/decade to 61.5 mV/decade and excellent threshold voltage of 0.18 V in proposed FinFET. The characteristics of the proposed SRAM cell including, static noise margin (SNM), read/write delay, and subthreshold leakage power, are compared with the conventional 6 T SRAM cells. It is reported that the FinFET SRAM cell has RSNM, HSNM, and WNM of 285 mV, 360 mV, and 302 mV, respectively, at Vds = 1 V. Furthermore, the suggested device-based SRAM cell outperforms traditional SRAM cells at 1.0 V in terms of read noise margin, hold noise margin, and write noise margin, as well as leakage power. Thus, it may prove to be a viable option for lowering leakage components, making it effective for low-power and high-performance inverter and SRAM cell design in the nanoscale regime.
- 14 April 2024
- Published by Springer Nature in Microsystem Technologies
- Vol. 30 (7) , 821-843
VOCs sensors based on bulk acoustic resonators: a comprehensive review
- 14 April 2024
- Published by Springer Nature in Microsystem Technologies
- Vol. 30 (7) , 821-843
VOCs sensors based on bulk acoustic resonators: a comprehensive review
- 24 April 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (4) , 655-661
FEM modelling and performance evaluation of a flexible film bulk acoustic resonator
- 24 April 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (4) , 655-661
FEM modelling and performance evaluation of a flexible film bulk acoustic resonator
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2782 (1) , 020017
Evaluation of Bi-CAM and TCAM cells with MTJ for low power and high-speed using 180 NM technology
TCAM (Ternary content-addressable memory) works for high-speed search in single clock cycle. In TCAM, memories are searched by data rather than by an address and a memory address among matches is selected while in static random-access memory searches by address and access the data at that address. TCAM search operation is faster than SRAM. Limitations of TCAM are relatively slow access time, low scalability, complex circuitry, low storage density, and very expensive. Several content addressable memories (CAM) and Ternary content addressable memory based on Magnetic Tunnel Junction (MTJ) are proposed. CAM cells and TCAM cells on Cadence Virtuoso with Monte Carlo simulation for 180nm technology are successfully implemented and proposed.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2782 (1) , 020017
Open AccessEvaluation of Bi-CAM and TCAM cells with MTJ for low power and high-speed using 180 NM technology
TCAM (Ternary content-addressable memory) works for high-speed search in single clock cycle. In TCAM, memories are searched by data rather than by an address and a memory address among matches is selected while in static random-access memory searches by address and access the data at that address. TCAM search operation is faster than SRAM. Limitations of TCAM are relatively slow access time, low scalability, complex circuitry, low storage density, and very expensive. Several content addressable memories (CAM) and Ternary content addressable memory based on Magnetic Tunnel Junction (MTJ) are proposed. CAM cells and TCAM cells on Cadence Virtuoso with Monte Carlo simulation for 180nm technology are successfully implemented and proposed.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2782 (1) , 020016
A low voltage low power OTA and three stage class-AB CMOSOTA using bulk driven technique
This work describes a low voltage and low power OTA, also three stage class-AB CMOS OTA, which both use body driven techniques. The proposed Bulk driven (body d
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2782 (1) , 020016
Open AccessA low voltage low power OTA and three stage class-AB CMOSOTA using bulk driven technique
This work describes a low voltage and low power OTA, also three stage class-AB CMOS OTA, which both use body driven techniques. The proposed Bulk driven (body d
- 10 September 2021
- Published by Springer Nature
- p. 129-138
Investigating the Effect of Various Bragg’s Reflector Configurations on the Performance of Flexible FBAR Sensors
- 10 September 2021
- Published by Springer Nature
- p. 129-138
Investigating the Effect of Various Bragg’s Reflector Configurations on the Performance of Flexible FBAR Sensors