MGManuel García-Hipólito

Manuel García-Hipólito

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Manuel García-Hipólito has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Surface-Engineered Magnetoluminescent Nanomaterials for Bone Regeneration and Cancer Theranostics: A Critical Review of Functional Coatings and Biointerfaces

    by Rodrigo Alberto Osorio-Arciniega, Jesús Ángel Arenas-Alatorre, Roxana Marisol Calderón-Olvera, Manuel García-Hipólito, Osmar A. Chanes-Cuevas, José Guillermo Villagómez-Olea, Marco Antonio Álvarez-Pérez

    Magnetoluminescent nanomaterials (MLNPs) integrate magnetic and luminescent components for imaging, delivery, and externally controlled interventions. For bone regeneration, their proposed value lies in combining monitoring with magnetic guidance or stimulation during repair. This critical review evaluates how silica and mesoporous silica shells, polymers, core–shell and Janus architectures, and surface ligands affect emission, magnetic response, colloidal stability, loading, and biological interactions. Bone-relevant evidence remains limited and heterogeneous: reported outcomes range from cell tracking and labeling compatibility to material bioactivity, cellular osteogenesis-related responses, and peri-implant bone formation. These endpoints are evaluated separately, and interface-related effects are interpreted in relation to composition, architecture, and testing conditions. Designs developed for cancer imaging and therapy provide complementary evidence requiring dedicated regenerative validation. Recommended priorities are to define the intended monitoring or repair benefit, verify function in the final scaffold or delivery format, establish added value with matched controls, and follow osteogenic, vascular, and immune responses alongside component fate throughout healing. Translation also requires clinically feasible exposure, sterilization compatibility, and reproducible manufacture. Biological magnetic–photonic synergy requires appropriate stimulation controls and interaction analysis, while adaptive control remains a prospective research objective.

  • Open Access

    ZnO, ZnO:Ce3+ and ZnO:Nd3+ Microflowers on Stainless-Steel Mesh Prepared by Means of Spray Pyrolysis Technique for Photocatalytic and Photoluminescent Applications

    by Natali López García, Adriana Báez Rodríguez, Luis Zamora-Peredo, Óscar Velázquez-Camilo, Rafael Martínez-Martínez, Ciro Falcony-Guajardo, Omar Solorza-Feria, Manuel García-Hipólito, Pablo Cardoso-Ávila, Jaime Martínez-Castillo, et al.

    A homogeneous photocatalyst on a stable substrate is required for photocatalytic reactors in wastewater treatment. ZnO films were synthesized on stainless steel prepared by the spray pyrolysis technique at different deposition temperatures (350 to 500 °C in steps of 50 °C). Scanning electron microscopy showed microflowers formed by nanopetals with an average size of 2 μm. The ZnO wurtzite structure and its defects were studied by Raman spectroscopy, X-ray diffraction, diffuse reflectance, and photoluminescence spectroscopy. A deposition temperature of 400 °C was chosen due to the presence of a higher number of vibrational modes, better distribution of microflowers, smaller crystallite size and a higher number of defects than the other options. Lanthanides were incorporated into ZnO by solution spraying, and then thermal treatment was performed at 600 °C. The photocatalytic evaluation of ZnO showed the best photocatalytic activity under UV light at 365 nm with a 69.34% degradation efficiency at 120 min. Photocatalytic activity toward methylene blue degradation was enhanced in ZnO:Ce3+ (2 and 4 atom%) and ZnO:Nd3+ (0.05 and 2 atom%) samples, achieving degradation efficiencies above 90% within 30 min of UV–visible light irradiation.

  • Open Access

    Electric Field-Assisted Chemical Bath Deposition of ZnO Thin Films: Effects of Field Intensity, Polarity Inversion, and Air Agitation on Film Properties

    by Jesús Bladimir Cepero-Rodríguez, Francisco Ramos-Brito, Jorge Noe Angulo-Rocha, Marco Antonio Sánchez-Alejó, Rafael Martínez-Martínez, Enrique Camarillo-García, Erika Lizárraga-Medina, Fernando J. Sánchez-Rodríguez, Castulo Alejo-Armenta, Adrián Canizalez-Román, et al.

    This study presents an innovative modification to the chemical bath deposition method for synthesizing zinc oxide thin films by incorporating a high-voltage electric field, with and without electrical polarity inversion, to influence film growth dynamics. Two configurations were developed to assess the effects of electric field strength, periodic inversion, air agitation, and solution pH on the morphological, structural, and optical properties of ZnO coatings. Morphology studies revealed that particle size, shape, and distribution were strongly dependent on synthesis parameters, with electric field and air injection enabling higher surface coverage and finer nanostructures. Crystalline structural analysis confirmed the formation of the wurtzite ZnO phase, with reduced interplanar spacing and crystallite size under electric fields, especially when polarity was inverted. Optical measurements showed a consistent increase in the band gap (blue shift) and reduced defect-related absorption when electric field is applied. These findings are evidence that controlled electric field application during chemical bath deposition enables precise tuning of ZnO film properties.


  • Open Access

    Electric Field-Assisted Chemical Bath Deposition of ZnO Thin Films: Effects of Field Intensity, Polarity Inversion, and Air Agitation on Film Properties

    by Jesús Bladimir Cepero-Rodríguez, Francisco Ramos-Brito, Jorge Noé Angulo-Rocha, Marco Antonio Sánchez-Alejo, Rafael Martínez Martínez, Enrique Camarillo-García, Erika Lizárraga-Medina, Fernando J. Sanchez-Rodriguez, Cástulo Anselmo Alejo-Armenta, Vicente Adrián Canizalez-Roman, et al.

    This study presents an innovative modification to the Chemical Bath Deposition (CBD) method for synthesizing zinc oxide (ZnO) thin films by incorporating a high-voltage electric field (HVEF), with and without electrical polarity inversion, to influence film growth dynamics. Two configurations, CBD-HVEF-A and CBD-HVEF-B, were developed to assess the effects of electric field strength, periodic inversion, air agitation, and solution pH on the structural, morphological, and optical properties of ZnO coatings. X-ray diffraction confirmed the formation of the wurtzite ZnO phase, with reduced interplanar spacing and crystallite size under electric fields, especially when polarity was inverted. Scanning electron microscopy revealed that particle size, shape, and distribution were strongly dependent on synthesis parameters, with electric field and air injection enabling higher surface coverage and finer nanostructures. Optical measurements showed a consistent increase in the band gap (blue shift) and reduced defect-related absorption. These findings demonstrate that controlled electric field application during CBD enables precise tuning of ZnO film properties for advanced optoelectronic applications.


  • Open Access

    Fabrication of Li-Doped NiO Thin Films by Ultrasonic Spray Pyrolysis and Its Application in Light-Emitting Diodes

    by Víctor Hugo López-Lugo, Manuel García-Hipólito, Arturo Rodríguez-Gómez, Juan Carlos Alonso-Huitrón

    The fabrication of NiO films by different routes is important to extend and improve their applications as hole-transporting layers in organic and inorganic optoelectronic devices. Here, an automated ultrasonic pyrolysis spray method was used to fabricate NiO and Li-doped NiO thin films using nickel acetylacetonate and lithium acetate dihydrate as metal precursor and dimethylformamide as solvent. The effect of the amount of lithium in the precursor solution on the structural, morphological, optical, and electrical properties were studied. XRD results reveal that all the samples are polycrystalline with cubic structure and crystallite sizes in the range of 21 to 25 nm, without any clear trend with the Li doping level. AFM analysis shows that the crystallites form round-shaped aggregates and all the films have low roughness. The optical transmittance of the films reaches values of 60% to 77% with tendency upward as Li content is increased. The electrical study shows that the films are p-type, with the carrier concentration, resistivity, and carrier mobility depending on the lithium doping. NiO:Li (10%) films were successfully incorporated into inorganic light emitting diodes together with Mn-doped ZnS and ZnO:Al films, all deposited on ITO by the same ultrasonic spray pyrolysis technique.


  • Open Access

    Composite Fiber Spun Mat Synthesis and In Vitro Biocompatibility for Guide Tissue Engineering

    by Rodrigo Osorio-Arciniega, Manuel García-Hipólito, Octavio Alvarez-Fregoso, Marco Antonio Alvarez-Perez

    Composite scaffolds are commonly used strategies and materials employed to achieve similar analogs of bone tissue. This study aims to fabricate 10% wt polylactic acid (PLA) composite fiber scaffolds by the air-jet spinning technique (AJS) doped with 0.5 or 0.1 g of zirconium oxide nanoparticles (ZrO2) for guide bone tissue engineering. ZrO2 nanoparticles were obtained by the hydrothermal method and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). SEM and fourier-transform infrared spectroscopy (FTIR) analyzed the synthesized PLA/ZrO2 fiber scaffolds. The in vitro biocompatibility and bioactivity of the PLA/ZrO2 were studied using human fetal osteoblast cells. Our results showed that the hydrothermal technique allowed ZrO2 nanoparticles to be obtained. SEM analysis showed that PLA/ZrO2 composite has a fiber diameter of 395 nm, and the FITR spectra confirmed that the scaffolds’ chemical characteristics are not affected by the synthesized technique. In vitro studies demonstrated that PLA/ZrO2 scaffolds increased cell adhesion, cellular proliferation, and biomineralization of osteoblasts. In conclusion, the PLA/ZrO2 scaffolds are bioactive, improve osteoblasts behavior, and can be used in tissue bone engineering applications.


  • Open Access

    Photoluminescent ZrO2:Tb3+ thin films synthesized by USP technique using a metal-organic precursor

    by G Juárez-López, Rafael Martínez Martínez, I I Rojas-Velasco, M García-Hipólito, F. Ramos-Brito, E I Velazquez-Cruz, Miguel A Aguilar-Frutis, Ciro Falcony-Guajardo

    Photoluminescent ZrO2 and ZrO2:Tb3+ thin films were synthesized from metal-organic precursor, zirconium acetylacetonate [Zr(C5H7O2)4], using Ultrasonic Spray Pyrolysis method. These thin films were deposited on Corning glass substrates at several deposition temperatures. ZrO2 and ZrO2:Tb3+ (X a/o) films were characterized by x-ray diffraction to identify the crystalline structure; results showed tetragonal phase of zirconia; with a crystalline size of approximately 4 nm according to Scherrer’s formula. Also, SEM micrographs revealed that surface morphology of these films is very flat. Chemical composition microanalysis showed presence of oxygen and zirconium as major species. Analysis by Infrared spectroscopy demonstrates that 900 and 760 nm bands correspond to presence of ZrO2. In addition, these films showed optical transmittances from 75 to 98 % in the visible range. Photoluminescent features varied as a function of excitation wavelength; when excited at λ ex = 286 nm strong green emission is observed, which is associated to electronic transitions 5D4 → 7Fn (n = 6, 5, 4, 3) corresponding to Tb3+ ions. Excitation with λ ex = 336 nm exhibits spectra with simultaneous emissions from host lattice and Tb3+ ions; here, observed color was blue-green.


  • Open Access

    Blue and bluish-white colors from the luminescent ZrO2 and ZrO2: Al3+ films prepared by the USP method

    by R Martínez-Martínez, G Juárez-López, M García-Hipólito, J J Bautista Díaz, Salvador Carmona Téllez, Miguel A Aguilar-Frutis, Gilberto Alarcón Flores, C Falcony

    ZrO2 and ZrO2: Al3+(× at.%) films were deposited by ultrasonic spray pyrolysis process. Luminescent films were produced from Oxychloride Zirconium Octahydrate and Aluminium Chloride Hexahydrate as precursors. Measurements of photo and cathodoluminescence were carried out doing variations on deposition temperature and doping concentration (× at.% Al3+ions). With the increase in substrate temperature, an overall growth of photo-cathodoluminescence intensities was perceived. Furthermore, these films presented luminescence concentration quenching with hight Al doping concentration. Chromaticity coordinates indicated blue emission from host lattice (ZrO2 films) and cold-white emissions from ZrO2: Al3+(× at.%) films. Closest CIE coordinates to the perfect white emission were x = 0.303, y = 0.337. XRD patterns, measured with variations of substrate temperature, showed tetragonal phase of nano-zirconium oxide films. In addition, surface morphology characteristics for studied films are presented.


  • Open Access

    Spray Pyrolysis Technique; High-K Dielectric Films and Luminescent Materials: A Review

    by Ciro Falcony, Miguel Angel Aguilar-Frutis, Manuel García-Hipólito

    The spray pyrolysis technique has been extensively used to synthesize materials for a wide variety of applications such as micro and sub-micrometer dimension MOSFET´s for integrated circuits technology, light emitting devices for displays, and solid-state lighting, planar waveguides and other multilayer structure devices for photonics. This technique is an atmospheric pressure chemical synthesis of materials, in which a precursor solution of chemical compounds in the proper solvent is sprayed and converted into powders or films through a pyrolysis process. The most common ways to generate the aerosol for the spraying process are by pneumatic and ultrasonic systems. The synthesis parameters are usually optimized for the materials optical, structural, electric and mechanical characteristics required. There are several reviews of the research efforts in which spray pyrolysis and the processes involved have been described in detail. This review is intended to focus on research work developed with this technique in relation to high-K dielectric and luminescent materials in the form of coatings and powders as well as multiple layered structures.


  • Tunable white light emission from hafnium oxide films co‐doped with trivalent terbium and europium ions deposited by Pyrosol technique

    by J. C. Guzmán‐Olguín, E. Montes, J. Guzmán‐Mendoza, A. Báez‐Rodríguez, L. Zamora‐Peredo, M. García‐Hipólito, O. Alvarez‐Fregoso, I. Martínez‐Merlín, C. Falcony

    In this paper, the photo and cathodoluminescent properties of HfO2 films optically activated with different atomic concentrations of Tb3+ and Eu3+ ions, deposited by the Pyrosol technique, are reported. These films were deposited at temperatures from 400 to 600 °C, using chlorides as raw materials. The surface morphologies of all deposited films were rough and dense. X‐ray diffraction analysis showed that the films deposited at 600 °C were polycrystalline exhibiting the HfO2 monoclinic phase. The tuning by the means of the excitation wavelength generates photoluminescence spectra, for co‐doped films, in several emissions from blue to yellow (including white light) due to the characteristic electronic transitions of Tb3+ (green), Eu3+(red) ions and the violet‐blue emission associated to the host lattice (HfO2). According to the chromaticity diagram, the best white light is reached for the sample S2 excited with 382 nm (x = 0.3343, y = 0.3406). The cathodoluminescence emission spectra for co‐doped films showed emissions from green to red (including yellow, orange and other intermediate emissions). The averaged quantum efficiency values of the sample labeled as S2 resulted between 47 and 78% depending on the excitation wavelength. In addition, XPS, TEM, SEM and decay times were performed to characterize these films.