Ilyoung Oh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ilyoung Oh has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jungje Ha
Agency for Defense Development, Daejeon, Republic of Korea
4 shared publications - Changseok Cho
Department of Electrical and Electronic Engineering, Yonsei University, Seoul, South Korea
3 shared publications - Jong-Gwan Yook
Yonsei University
3 shared publications - Yongshik Lee
Department of Electrical and Electronic Engineering, Yonsei University, Seoul, South Korea
3 shared publications - Cheongmin Lee
Department of Electrical and Electronic Engineering, Yonsei University, Seoul, Republic of Korea
2 shared publications - Hyunsoo Lee
Agency for Defense Development (ADD), Daejeon, South Korea
2 shared publications
Latest Publications
- Open Access
- 31 July 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (7) , 628-638
Accuracy and Reproducibility Analysis of RCS Measurements in a Non-Anechoic Chamber Environment
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 31 July 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (7) , 628-638
Open AccessAccuracy and Reproducibility Analysis of RCS Measurements in a Non-Anechoic Chamber Environment
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- Open Access
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 41324-41335
Ultra-Low-Cost Radar Cross Section Measurement and Validation Method Using a 3D-Printed Scale Model in a Non-Anechoic Chamber Environment
This paper validates the accuracy of radar cross section (RCS) measurements conducted in an environment that significantly reduces the three main costs associated with RCS measurements: spatial costs, target under test (TUT) production costs, and the costs of constructing and maintaining an anechoic chamber. Measurement results for simple shapes that satisfy far-field conditions, such as metal spheres and metal plates, are presented. Additionally, results are provided for a geometrically complex 1/15 aircraft scale model that does not satisfy far-field conditions. The noise equivalent RCS (NERCS) of the proposed non-anechoic chamber setup is determined by measuring various sizes of metal spheres, and the RCS error over time is evaluated by measuring a metal plate continuously for 12 h in a non-temperature and humidity-controlled environment. The NERCS is found to be -43.2 dBsm. The mean RCS error for the metal plate, measured immediately after background measurement and again after 12 h, is found to be 0.005 dB and 0.220 dB, respectively. For RCS measurements of the 1/15 scale model, an image-based near-field to far-field transformation (NFFFT) algorithm is employed. The NFFFT results, including image filtering, show a mean RCS error of 5.6 dB. This error is 1.9 dB higher than previously reported results obtained in an anechoic chamber environment using an amplifier to enhance the signal-to-noise ratio (SNR). These findings can serve as guidelines for considering measurement results in a highly simplified RCS measurement setup, offering rapid feedback crucial for stealth platform design.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 41324-41335
Open AccessUltra-Low-Cost Radar Cross Section Measurement and Validation Method Using a 3D-Printed Scale Model in a Non-Anechoic Chamber Environment
This paper validates the accuracy of radar cross section (RCS) measurements conducted in an environment that significantly reduces the three main costs associated with RCS measurements: spatial costs, target under test (TUT) production costs, and the costs of constructing and maintaining an anechoic chamber. Measurement results for simple shapes that satisfy far-field conditions, such as metal spheres and metal plates, are presented. Additionally, results are provided for a geometrically complex 1/15 aircraft scale model that does not satisfy far-field conditions. The noise equivalent RCS (NERCS) of the proposed non-anechoic chamber setup is determined by measuring various sizes of metal spheres, and the RCS error over time is evaluated by measuring a metal plate continuously for 12 h in a non-temperature and humidity-controlled environment. The NERCS is found to be -43.2 dBsm. The mean RCS error for the metal plate, measured immediately after background measurement and again after 12 h, is found to be 0.005 dB and 0.220 dB, respectively. For RCS measurements of the 1/15 scale model, an image-based near-field to far-field transformation (NFFFT) algorithm is employed. The NFFFT results, including image filtering, show a mean RCS error of 5.6 dB. This error is 1.9 dB higher than previously reported results obtained in an anechoic chamber environment using an amplifier to enhance the signal-to-noise ratio (SNR). These findings can serve as guidelines for considering measurement results in a highly simplified RCS measurement setup, offering rapid feedback crucial for stealth platform design.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (4) , 2605-2614
Plasma-Assisted Checkerboard Metasurface With 55.4 dB Monostatic Radar Cross-Section (RCS) Reduction
This work presents a pioneering approach that utilizes plasma as a high-loss substrate. By designing a checkerboard metasurface on the dielectric-barrier discharge (DBD) plasma substrate, the magnitude of waves reflected from the metasurface’s alternating tiles is effectively reduced. This improvement enhances tolerance to magnitude imbalance and enables more efficient destructive interference. The plasma-assisted checkerboard metasurface achieves an outstanding radar cross-section (RCS) reduction performance of up to 55.4 dB in the X-band for a plate with a 200×200 mm2 size experimentally, surpassing all previously reported methods. Theoretical analysis, simulations, and experimental findings align well, confirming the effectiveness of the proposed mechanism. This innovative use of plasma as a substrate, rather than a standalone medium, marks a significant departure from conventional plasma-based RCS reduction methods. This suggests the potential of plasma to push boundaries and create countless opportunities across a wide range of applications that can benefit from highly lossy substrates.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (4) , 2605-2614
Plasma-Assisted Checkerboard Metasurface With 55.4 dB Monostatic Radar Cross-Section (RCS) Reduction
This work presents a pioneering approach that utilizes plasma as a high-loss substrate. By designing a checkerboard metasurface on the dielectric-barrier discharge (DBD) plasma substrate, the magnitude of waves reflected from the metasurface’s alternating tiles is effectively reduced. This improvement enhances tolerance to magnitude imbalance and enables more efficient destructive interference. The plasma-assisted checkerboard metasurface achieves an outstanding radar cross-section (RCS) reduction performance of up to 55.4 dB in the X-band for a plate with a 200×200 mm2 size experimentally, surpassing all previously reported methods. Theoretical analysis, simulations, and experimental findings align well, confirming the effectiveness of the proposed mechanism. This innovative use of plasma as a substrate, rather than a standalone medium, marks a significant departure from conventional plasma-based RCS reduction methods. This suggests the potential of plasma to push boundaries and create countless opportunities across a wide range of applications that can benefit from highly lossy substrates.
- Open Access
Compensation of Heat Effect in Dielectric Barrier Discharge (DBD) Plasma System for Radar Cross-Section (RCS) Reduction
In this study, the problems encountered in radar cross-section (RCS) measurement experiments utilizing a dielectric barrier discharge (DBD) plasma system are examined and an effective solution is proposed. A DBD plasma system generates heat due to the high bias voltage required for plasma generation. The thermal-induced structural deformation of the DBD structure caused by this high voltage and its impact on RCS measurements are analyzed. In addition, techniques for minimizing the thermal-induced deformation and compensation methods for addressing the minimized deformation are proposed. Furthermore, RCS measurements are conducted on two kinds of DBD structures using the proposed method to experimentally demonstrate the improved agreement between the simulation and measurement results. For both structures, the RCS experimental results are in very good agreement with the simulation results, which enables accurate plasma characterization. In conclusion, it can be expected that the proposed method can be used to provide more accurate RCS measurements on various DBD structures that generate high heat.
Open AccessCompensation of Heat Effect in Dielectric Barrier Discharge (DBD) Plasma System for Radar Cross-Section (RCS) Reduction
In this study, the problems encountered in radar cross-section (RCS) measurement experiments utilizing a dielectric barrier discharge (DBD) plasma system are examined and an effective solution is proposed. A DBD plasma system generates heat due to the high bias voltage required for plasma generation. The thermal-induced structural deformation of the DBD structure caused by this high voltage and its impact on RCS measurements are analyzed. In addition, techniques for minimizing the thermal-induced deformation and compensation methods for addressing the minimized deformation are proposed. Furthermore, RCS measurements are conducted on two kinds of DBD structures using the proposed method to experimentally demonstrate the improved agreement between the simulation and measurement results. For both structures, the RCS experimental results are in very good agreement with the simulation results, which enables accurate plasma characterization. In conclusion, it can be expected that the proposed method can be used to provide more accurate RCS measurements on various DBD structures that generate high heat.
- Open Access
- 28 February 2021
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 32 (2) , 173-180
FDTD Algorithm Based on the Modified Lorentz Dispersive Model for the Analysis of the Characteristics of Plasma
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 28 February 2021
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 32 (2) , 173-180
Open AccessFDTD Algorithm Based on the Modified Lorentz Dispersive Model for the Analysis of the Characteristics of Plasma
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- Open Access
- 29 February 2020
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 31 (2) , 136-142
Analysis of Shielding Effectiveness for Concrete Material with Crack Using ELND-FDTD Method
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 29 February 2020
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 31 (2) , 136-142
Open AccessAnalysis of Shielding Effectiveness for Concrete Material with Crack Using ELND-FDTD Method
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- Open Access
- 31 March 2018
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 29 (3) , 225-232
Optimization of Extremely Low Numerical-Dispersion FDTD Method Based on H(2,4) Scheme for Wideband Analysis of Lossy Dielectric
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 31 March 2018
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 29 (3) , 225-232
Open AccessOptimization of Extremely Low Numerical-Dispersion FDTD Method Based on H(2,4) Scheme for Wideband Analysis of Lossy Dielectric
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)