Zhao Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhao Zhang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Kun Liu
Tianjin University
7 shared publications - Junfeng Jiang
Tianjin University
6 shared publications - Jinying Ma
Tianjin University of Technology and Education
3 shared publications - Pengxiang Chang
School of Integrated Circuit Science and Engineering, Tianjin University of Technology, Tianjin, China
3 shared publications - Shuang Wang
Tianjin University
3 shared publications - Tianhua Xu
University of Warwick
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (20) , 9126-9133
Toward Practical Speckle-Free Imaging in Multimode Fiber Endoscopy via Semi-Supervised Cycle-Consistent Generative Networks With Optimal Weighted Convolution
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (20) , 9126-9133
Toward Practical Speckle-Free Imaging in Multimode Fiber Endoscopy via Semi-Supervised Cycle-Consistent Generative Networks With Optimal Weighted Convolution
- Top Cited Papers
- 16 December 2021
- Published by Optica Publishing Group in Photonics Research
- Vol. 10 (1) , 126-147
Performance improvement approaches for optical fiber SPR sensors and their sensing applications
Optical fiber surface plasmon resonance (SPR) sensors point toward promising application potential in the fields of biomarker detection, food allergen screening, and environmental monitoring due to their unique advantages. This review outlines approaches in improving the fiber SPR sensing performance, e.g., sensitivity, detection accuracy, reliability, cross-sensitivity, selectivity, convenience and efficiency, and corresponding sensing applications. The sensing principles of SPR sensors, especially the performance indicators and their influencing factors, have been introduced. Current technologies for improving the fiber SPR performance and their application scenarios are then reviewed from the aspects of fiber substrate, intrinsic layer (metal layer), and surface nanomaterial modification. Reasonable design of the substrate can strengthen the evanescent electromagnetic field and realize the multi-parameter sensing, and can introduce the in situ sensing self-compensation, which allows corrections for errors induced by temperature fluctuation, non-specific binding, and external disturbances. The change of the intrinsic layer can adjust the column number, the penetration depth, and the propagation distance of surface plasmon polaritons. This can thereby promote the capability of sensors to detect the large-size analytes and can reduce the full width at half-maximum of SPR curves. The modification of various-dimensionality nanomaterials on the sensor surfaces can heighten the overlap integral of the electromagnetic field intensity in the analyte region and can strengthen interactions between plasmons and excitons as well as interactions between analyte molecules and metal surfaces. Moreover, future directions of fiber SPR sensors are prospected based on the important and challenging problems in the development of fiber SPR sensors.
- 16 December 2021
- Published by Optica Publishing Group in Photonics Research
- Vol. 10 (1) , 126-147
Top Cited PapersPerformance improvement approaches for optical fiber SPR sensors and their sensing applications
Optical fiber surface plasmon resonance (SPR) sensors point toward promising application potential in the fields of biomarker detection, food allergen screening, and environmental monitoring due to their unique advantages. This review outlines approaches in improving the fiber SPR sensing performance, e.g., sensitivity, detection accuracy, reliability, cross-sensitivity, selectivity, convenience and efficiency, and corresponding sensing applications. The sensing principles of SPR sensors, especially the performance indicators and their influencing factors, have been introduced. Current technologies for improving the fiber SPR performance and their application scenarios are then reviewed from the aspects of fiber substrate, intrinsic layer (metal layer), and surface nanomaterial modification. Reasonable design of the substrate can strengthen the evanescent electromagnetic field and realize the multi-parameter sensing, and can introduce the in situ sensing self-compensation, which allows corrections for errors induced by temperature fluctuation, non-specific binding, and external disturbances. The change of the intrinsic layer can adjust the column number, the penetration depth, and the propagation distance of surface plasmon polaritons. This can thereby promote the capability of sensors to detect the large-size analytes and can reduce the full width at half-maximum of SPR curves. The modification of various-dimensionality nanomaterials on the sensor surfaces can heighten the overlap integral of the electromagnetic field intensity in the analyte region and can strengthen interactions between plasmons and excitons as well as interactions between analyte molecules and metal surfaces. Moreover, future directions of fiber SPR sensors are prospected based on the important and challenging problems in the development of fiber SPR sensors.
- 26 August 2021
- Published by Elsevier in Optics Communications
- Vol. 502, 127416
Black phosphorus thin film integrated long-period fiber grating for highly refractive index and biomolecules detection
- 26 August 2021
- Published by Elsevier in Optics Communications
- Vol. 502, 127416
Black phosphorus thin film integrated long-period fiber grating for highly refractive index and biomolecules detection
- Open Access
- 22 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2137
Double-Antibody Sandwich Immunoassay and Plasmonic Coupling Synergistically Improved Long-Range SPR Biosensor with Low Detection Limit
A long-range surface plasmonic resonance (LR-SPR) biosensor modified with double-antibody sandwich immunoassay and plasmonic coupling is demonstrated for human-immunoglobulin G detection with a low limit of detection (LOD). The double-antibody sandwich immunoassay dramatically changes the average refractive index of the medium layer on the sensor surface. The near-field electron coupling between the localized surface plasmon and the long-range surface plasmon leads to a significant perturbation of the evanescent field. The large penetration depth and the long propagation distance of the long-range surface plasmonic waves facilitate the LR-SPR sensor in the detection of biological macromolecules. The unique light absorption characteristic of the nanocomposite material in the sensor provides the in situ self-compensation for the disturbance. Therefore, besides the inherent advantages of optical fiber sensors, the developed biosensor can realize the detection of biomolecules with high sensitivity, low LOD and high accuracy and reliability. Experimental results demonstrate that the LOD of the biosensor is as low as 0.11 μg/mL in the detection of the phosphate-buffered saline sample, and the spike-and-repetition rate is 105.56% in the detection of the real serum sample, which partly shows the practicability of the biosensor. This indicates that the LR-SPR biosensor provides better response compared with existing similar sensors and can be regarded as a valuable method for biochemical analysis and disease detection.
- 22 August 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (8) , 2137
Open AccessDouble-Antibody Sandwich Immunoassay and Plasmonic Coupling Synergistically Improved Long-Range SPR Biosensor with Low Detection Limit
A long-range surface plasmonic resonance (LR-SPR) biosensor modified with double-antibody sandwich immunoassay and plasmonic coupling is demonstrated for human-immunoglobulin G detection with a low limit of detection (LOD). The double-antibody sandwich immunoassay dramatically changes the average refractive index of the medium layer on the sensor surface. The near-field electron coupling between the localized surface plasmon and the long-range surface plasmon leads to a significant perturbation of the evanescent field. The large penetration depth and the long propagation distance of the long-range surface plasmonic waves facilitate the LR-SPR sensor in the detection of biological macromolecules. The unique light absorption characteristic of the nanocomposite material in the sensor provides the in situ self-compensation for the disturbance. Therefore, besides the inherent advantages of optical fiber sensors, the developed biosensor can realize the detection of biomolecules with high sensitivity, low LOD and high accuracy and reliability. Experimental results demonstrate that the LOD of the biosensor is as low as 0.11 μg/mL in the detection of the phosphate-buffered saline sample, and the spike-and-repetition rate is 105.56% in the detection of the real serum sample, which partly shows the practicability of the biosensor. This indicates that the LR-SPR biosensor provides better response compared with existing similar sensors and can be regarded as a valuable method for biochemical analysis and disease detection.
- Open Access
- 21 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1423
Refractometric Sensitivity Enhancement of Weakly Tilted Fiber Bragg Grating Integrated with Black Phosphorus
The sensitivity enhancement of the weakly tilted fiber Bragg grating (WTFBG) integrated with black phosphorus (BP) was investigated via numerical simulations and experimental demonstrations. BP nanosheets were deposited twice on the cylindrical WTFBG surface using the in situ layer-by-layer (i-LbL) deposition technique. The resonance intensity of the deepest cladding mode located around 1552 nm of WTFBG had a 9.2 dB decrease after the BP deposition process. This allows for the application of the intensity-modulated refractive index (RI) sensor. The sensing platform was implemented on the use of the BP integrated with WTFBG (BP-WTFBG). The refractometric sensing was achieved with the sensitivity enhancement of the resonance intensity modulation of the deepest cladding mode for the BP-WTFBG. The sensitivities were 137.6 dB/RIU and 75.6 dB/RIU in the RI region of 1.33–1.35 and 1.35–1.38, respectively. This platform shows great potential applications for biochemical sensing because of its highly sensitive RI sensing ability around the biochemical sensing window.
- 21 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1423
Open AccessRefractometric Sensitivity Enhancement of Weakly Tilted Fiber Bragg Grating Integrated with Black Phosphorus
The sensitivity enhancement of the weakly tilted fiber Bragg grating (WTFBG) integrated with black phosphorus (BP) was investigated via numerical simulations and experimental demonstrations. BP nanosheets were deposited twice on the cylindrical WTFBG surface using the in situ layer-by-layer (i-LbL) deposition technique. The resonance intensity of the deepest cladding mode located around 1552 nm of WTFBG had a 9.2 dB decrease after the BP deposition process. This allows for the application of the intensity-modulated refractive index (RI) sensor. The sensing platform was implemented on the use of the BP integrated with WTFBG (BP-WTFBG). The refractometric sensing was achieved with the sensitivity enhancement of the resonance intensity modulation of the deepest cladding mode for the BP-WTFBG. The sensitivities were 137.6 dB/RIU and 75.6 dB/RIU in the RI region of 1.33–1.35 and 1.35–1.38, respectively. This platform shows great potential applications for biochemical sensing because of its highly sensitive RI sensing ability around the biochemical sensing window.
- 12 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11436, 114360H-36
The effect of metal layer microstructure on optical fiber SPR sensor: a simulation study
The performance of an optic fiber SPR sensor is affected by the optical property of the metal layer. The optical property of the metal layer is affected by the surface morphology and the grain structure of itself. In this paper, the optical property of metal film based on the Drude-Lorentz model is improved by employing the Fuchs-Sondheimer theory and the Mayadas-Shatzkes theory. In the new law, the surface roughness and the grain structure are taken into account to describe the permittivity of metal layer theoretically. Then the improved model is used to analyze the performance of the optical fiber SPR sensor. The results shows that the surface roughness and the grain structure of metal layer significantly affect the resonance properties of the sensor. Specifically, the surface roughness of metal film can change the resonance wavelength of the SPR sensor. When the surface becomes smooth, resonance wavelength of SPR will decrease. In addition, with the increasing of grain size, the depth of the SPR curve increases obviously, while the full width at half maximum of the sensor decreases a lot. It means that, for a certain metal layer, the effects of the surface roughness and the grain structure should be considered in SPR technique.
- 12 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11436, 114360H-36
The effect of metal layer microstructure on optical fiber SPR sensor: a simulation study
The performance of an optic fiber SPR sensor is affected by the optical property of the metal layer. The optical property of the metal layer is affected by the surface morphology and the grain structure of itself. In this paper, the optical property of metal film based on the Drude-Lorentz model is improved by employing the Fuchs-Sondheimer theory and the Mayadas-Shatzkes theory. In the new law, the surface roughness and the grain structure are taken into account to describe the permittivity of metal layer theoretically. Then the improved model is used to analyze the performance of the optical fiber SPR sensor. The results shows that the surface roughness and the grain structure of metal layer significantly affect the resonance properties of the sensor. Specifically, the surface roughness of metal film can change the resonance wavelength of the SPR sensor. When the surface becomes smooth, resonance wavelength of SPR will decrease. In addition, with the increasing of grain size, the depth of the SPR curve increases obviously, while the full width at half maximum of the sensor decreases a lot. It means that, for a certain metal layer, the effects of the surface roughness and the grain structure should be considered in SPR technique.
- Open Access
- 18 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 33990-33997
Performance Enhancement of the Surface Plasmon Resonance Sensor Through the Annealing Process
An improved Drude-Lorentz model was proposed to describe the effect of annealing on the surface Plasmon resonance (SPR) sensor. In the new model, the grain structure is taken into account to describe theoretically the dispersion of gold films. Then the improved model is used to analyze the performance of SPR sensors before and after annealing. The results indicate that the grain structure of the gold film affect the resonance properties significantly. In our research, a considerable improvement in SPR fiber sensor performance is observed after annealing. The grain size of the gold film rises from 10.8 nm to 34.3 nm, and the absorption spectrum of the SPR fiber sensor becomes deeper and sharper, with the figure of merit increasing from 18.5 to 22.8 after annealing. Comparing with other sensor performance enhancement methods, the annealing progress does not change the sensor structure or add new modified layer. Therefore, most SPR sensors can be further annealed to improve the quality of the sensor after fabrication. This property makes the application of annealing very promising in optical sensing region.
- 18 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 33990-33997
Open AccessPerformance Enhancement of the Surface Plasmon Resonance Sensor Through the Annealing Process
An improved Drude-Lorentz model was proposed to describe the effect of annealing on the surface Plasmon resonance (SPR) sensor. In the new model, the grain structure is taken into account to describe theoretically the dispersion of gold films. Then the improved model is used to analyze the performance of SPR sensors before and after annealing. The results indicate that the grain structure of the gold film affect the resonance properties significantly. In our research, a considerable improvement in SPR fiber sensor performance is observed after annealing. The grain size of the gold film rises from 10.8 nm to 34.3 nm, and the absorption spectrum of the SPR fiber sensor becomes deeper and sharper, with the figure of merit increasing from 18.5 to 22.8 after annealing. Comparing with other sensor performance enhancement methods, the annealing progress does not change the sensor structure or add new modified layer. Therefore, most SPR sensors can be further annealed to improve the quality of the sensor after fabrication. This property makes the application of annealing very promising in optical sensing region.
- Open Access
- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 169961-169968
Theoretical and Experimental Investigation of an All-Fiber Waveguide Coupled Surface Plasmon Resonance Sensor With Au–ZnO–Au Sandwich Structure
In this paper, we proposed an all-fiber waveguide coupled surface Plasmon resonance (SPR) sensor which was designed and fabricated with Au-ZnO-Au sandwich multi-layer structure. Based on the transfer matrix method (TMM), the theoretical modeling of the proposed sensor structure was investigated. The influence of the layer thickness on the transmission spectrum of the sensor was studied numerically, in order to optimize each layer thickness, leading to sensitivity enhancement in the infrared spectral range. Meanwhile, an experimental testbed for the refractive index measurement was implemented based on the proposed all-fiber waveguide coupled SPR sensor. Using this waveguide coupled SPR sensor, the refractive index sensing was realized with a sensitivity enhancement of 7%—131% compared with conventional SPR sensors.
- 25 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 169961-169968
Open AccessTheoretical and Experimental Investigation of an All-Fiber Waveguide Coupled Surface Plasmon Resonance Sensor With Au–ZnO–Au Sandwich Structure
In this paper, we proposed an all-fiber waveguide coupled surface Plasmon resonance (SPR) sensor which was designed and fabricated with Au-ZnO-Au sandwich multi-layer structure. Based on the transfer matrix method (TMM), the theoretical modeling of the proposed sensor structure was investigated. The influence of the layer thickness on the transmission spectrum of the sensor was studied numerically, in order to optimize each layer thickness, leading to sensitivity enhancement in the infrared spectral range. Meanwhile, an experimental testbed for the refractive index measurement was implemented based on the proposed all-fiber waveguide coupled SPR sensor. Using this waveguide coupled SPR sensor, the refractive index sensing was realized with a sensitivity enhancement of 7%—131% compared with conventional SPR sensors.