Bent Herrmann
Research Subjects
Bent Herrmann has a total of 249 co-authors. Here are the top co-authors by number of shared publications:
Manu Sistiaga
Affiliations Fish Capture Division, Institute of Marine Research, Bergen, Norway, Department of Marine Technology, Norwegian University of Science and Technology, Trondheim, Norway
34 shared publications- Ludvig Ahm Krag
DTU Aqua, Technical University of Denmark, Hirtshals, Denmark
31 shared publications - Eduardo Grimaldo
SINTEF Ocean, Brattørkaia 17C, 7010 Trondheim, Norway
26 shared publications Jesse Brinkhof
21 shared publicationsRoger B. Larsen
20 shared publicationsIvan Tatone
The Arctic University of Norway, UiT, Breivika, N-9037 Tromsø, Norway
16 shared publications
Latest Publications
- Open Access
- 20 July 2026
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 101
Size selectivity of hand dredges targeting black clam (Villorita cyprinoides)
- 20 July 2026
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 101
Open AccessSize selectivity of hand dredges targeting black clam (Villorita cyprinoides)
- Open Access
- 26 May 2026
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 98
Addressing rigid gear rules under changing stock dynamics: A first empirical step towards flexible gear choice
- 26 May 2026
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 98
Open AccessAddressing rigid gear rules under changing stock dynamics: A first empirical step towards flexible gear choice
- 4 February 2026
- Published by Wiley in Fisheries Management and Ecology
- Vol. 33 (4) , 761-774
Guidelines to Make Swimming Crab ( Portunus trituberculatus ) Pot Fishery Size Selective
Pot fisheries are a crucial component of small‐scale fisheries worldwide, characterized by their low environmental impact, high species selectivity, and superior catch quality. However, these fisheries are often constrained by poor size selectivity, which results in substantial bycatch of juvenile target species and remains a major challenge for pot fisheries management globally. Incorporating escape gaps or increasing mesh size are effective technical measures to improve pot size selectivity and reduce the unintended capture of undersized individuals. However, the implementation of these measures typically depends on traditional experimental sea trials, which are costly, time‐consuming, and restrict the number of gear designs that can be tested. This study focuses on the Chinese swimming crab ( Portunus trituberculatus ) pot fishery, which is the most economically important crab fishery along the Chinese coast. Laboratory experiments were conducted to establish predictive models for the size selectivity potential of swimming crab in pots. The size selectivity potential of a wide range of escape gap shapes and sizes, as well as mesh size and mesh opening angle, were investigated. The predictive models for the size selectivity potential were compared to earlier sea trial results and demonstrated their usefulness to predict swimming crab size selectivity. Based on these models, we provide guidelines to make swimming crab pot fishery size selective, which would contribute to the sustainable management of this pot fishery.
- 4 February 2026
- Published by Wiley in Fisheries Management and Ecology
- Vol. 33 (4) , 761-774
Guidelines to Make Swimming Crab ( Portunus trituberculatus ) Pot Fishery Size Selective
Pot fisheries are a crucial component of small‐scale fisheries worldwide, characterized by their low environmental impact, high species selectivity, and superior catch quality. However, these fisheries are often constrained by poor size selectivity, which results in substantial bycatch of juvenile target species and remains a major challenge for pot fisheries management globally. Incorporating escape gaps or increasing mesh size are effective technical measures to improve pot size selectivity and reduce the unintended capture of undersized individuals. However, the implementation of these measures typically depends on traditional experimental sea trials, which are costly, time‐consuming, and restrict the number of gear designs that can be tested. This study focuses on the Chinese swimming crab ( Portunus trituberculatus ) pot fishery, which is the most economically important crab fishery along the Chinese coast. Laboratory experiments were conducted to establish predictive models for the size selectivity potential of swimming crab in pots. The size selectivity potential of a wide range of escape gap shapes and sizes, as well as mesh size and mesh opening angle, were investigated. The predictive models for the size selectivity potential were compared to earlier sea trial results and demonstrated their usefulness to predict swimming crab size selectivity. Based on these models, we provide guidelines to make swimming crab pot fishery size selective, which would contribute to the sustainable management of this pot fishery.
- 1 December 2024
- Published by Canadian Science Publishing in Canadian Journal of Fisheries and Aquatic Sciences
- Vol. 81 (12) , 1773-1786
Can operational tactics compensate for weaker tensile properties of biodegradable gillnets?
This study aimed at discriminating between the effects of physical strain due to the interactive effect of gear operation and degradation, and degradation only, on the differences in breaking strength, strain, and stiffness at break of polybutylene succinate-co-adipate-co-terephthalate (PBSAT) (biodegradable) and PA6 (nylon) gillnet materials, and to compare the effect of fish species and resulting capture mode on catch efficiency for a roundfish species, Atlantic cod ( Gadus morhua), and a flatfish species, European plaice ( Pleuronectes platessa) in the Danish coastal gillnet fishery. The PBSAT meshes were much weaker than PA6 already at the start of the experiment. There were 58% (95% Confidence Interval (CI): 38%–79%) less cod and 32% (CI: 17%–49%) less plaice after 4 months in the PBSAT gillnets. We did not observe significant differences between the interactive effect of gear operation and degradation, and degradation only, and in capture modes. We conclude that reduction in catch efficiency results from a combination of weaker mechanical properties worsened by degradation during, e.g., transport and storage, and a species given shape and swimming ability.
- 1 December 2024
- Published by Canadian Science Publishing in Canadian Journal of Fisheries and Aquatic Sciences
- Vol. 81 (12) , 1773-1786
Can operational tactics compensate for weaker tensile properties of biodegradable gillnets?
This study aimed at discriminating between the effects of physical strain due to the interactive effect of gear operation and degradation, and degradation only, on the differences in breaking strength, strain, and stiffness at break of polybutylene succinate-co-adipate-co-terephthalate (PBSAT) (biodegradable) and PA6 (nylon) gillnet materials, and to compare the effect of fish species and resulting capture mode on catch efficiency for a roundfish species, Atlantic cod ( Gadus morhua), and a flatfish species, European plaice ( Pleuronectes platessa) in the Danish coastal gillnet fishery. The PBSAT meshes were much weaker than PA6 already at the start of the experiment. There were 58% (95% Confidence Interval (CI): 38%–79%) less cod and 32% (CI: 17%–49%) less plaice after 4 months in the PBSAT gillnets. We did not observe significant differences between the interactive effect of gear operation and degradation, and degradation only, and in capture modes. We conclude that reduction in catch efficiency results from a combination of weaker mechanical properties worsened by degradation during, e.g., transport and storage, and a species given shape and swimming ability.
- Open Access
- 5 October 2024
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 79
Can automatic measuring replace humans when evaluating a shrimp fishery?
- 5 October 2024
- Published by Elsevier in Regional Studies in Marine Science
- Vol. 79
Open AccessCan automatic measuring replace humans when evaluating a shrimp fishery?
- Open Access
- 10 May 2024
- Published by Elsevier in Ocean Engineering
- Vol. 306
Trade-off between drag and catch performance when designing zooplankton trawls
- 10 May 2024
- Published by Elsevier in Ocean Engineering
- Vol. 306
Open AccessTrade-off between drag and catch performance when designing zooplankton trawls
- Open Access
- 13 December 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (12) , e0295776
Improving the size selectivity and exploitation pattern of cocktail shrimp (Trachypenaeus curvirostris) in shrimp trawl fishery of the South China Sea
In order to improve the size selectivity and exploitation pattern for cocktail shrimp (Trachypenaeus curvirostris) in shrimp trawl fishery of the South China Sea (SCS), selective properties of four codends were tested and compared. These experimental codends involved two mesh sizes, 30 and 35 mm, and two mesh shapes, diamond-mesh (T0) and diamond-mesh turned by 90 degree (T90), respectively. Our results demonstrated that increasing the mesh sizes in T0 codends or/and applying T90 codends would improve the selective properties for cocktail shrimp in the SCS. By comparing selectivity parameters, delta selectivity and exploitation pattern indicators, the T90 codend with 35-mm mesh size (T90_35) presented the best selective properties for cocktail shrimp in the studied areas. It will be a potential choice to substitute the currently legal codend in fisheries management to mitigate the bycatch of undersized cocktail shrimp in shrimp trawl fisheries of the SCS.
- 13 December 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (12) , e0295776
Open AccessImproving the size selectivity and exploitation pattern of cocktail shrimp (Trachypenaeus curvirostris) in shrimp trawl fishery of the South China Sea
In order to improve the size selectivity and exploitation pattern for cocktail shrimp (Trachypenaeus curvirostris) in shrimp trawl fishery of the South China Sea (SCS), selective properties of four codends were tested and compared. These experimental codends involved two mesh sizes, 30 and 35 mm, and two mesh shapes, diamond-mesh (T0) and diamond-mesh turned by 90 degree (T90), respectively. Our results demonstrated that increasing the mesh sizes in T0 codends or/and applying T90 codends would improve the selective properties for cocktail shrimp in the SCS. By comparing selectivity parameters, delta selectivity and exploitation pattern indicators, the T90 codend with 35-mm mesh size (T90_35) presented the best selective properties for cocktail shrimp in the studied areas. It will be a potential choice to substitute the currently legal codend in fisheries management to mitigate the bycatch of undersized cocktail shrimp in shrimp trawl fisheries of the SCS.
- Open Access
- 10 November 2023
- Published by Elsevier in Ocean & Coastal Management
- Vol. 247
One mesh does not fit all: A dual compartment codend provides flexible selectivity opportunities to manage mixed fisheries
- 10 November 2023
- Published by Elsevier in Ocean & Coastal Management
- Vol. 247
Open AccessOne mesh does not fit all: A dual compartment codend provides flexible selectivity opportunities to manage mixed fisheries