Ganna Sabadosh
Ganna Sabadosh has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Igor Stadnyk
Ternopil Ivan Puluj National Technical University
2 shared publications Volodymyr Piddubnyi
Kyiv National University of Trade and Economics, Faculty of Biotechnology and Food Sciences, Department of Technologies and Organization of Restaurant Business, Kyoto str. 19, 02156, Kyiv, Ukraine
2 shared publicationsAndrii Chahaida
Zhytomyr Polytechnic State University, Department of tourism and hotel and restaurant business Chudnivska str., 103, 10005, Zhytomyr, Ukraine
1 shared publicationIgor Dobrotvor
Department of Specialized Computer Systems, Ukraine Str. Ruska, 56, Ternopil, Tel.:+38097-79-84-357
1 shared publicationIurii Radchenko
Azienda Darmi Fabarm, Travagliato Via averolda 31. Italy 25039
1 shared publication- Khrystyna Kravcheniuk
Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
1 shared publication
Latest Publications
- 15 April 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (1) , 144-154
PROCESSES OF BREAD BAKING IN OVEN CHAMBERS: CONTINUA-DISCRETE MODELING
The paper substantiates the relevance of creating a universal mathematical model capable of describing a set of physical and technological processes occurring in multiphase and structurally inhomogeneous media under the action of heat flows. It is shown that the simultaneous presence of continuous phases (solids, liquids, gases) and discrete components (bulk materials, granules, local inclusions) requires the use of a continuous-discrete formulation of the problem. An Euler approach to the description of mass, heat and momentum transfer is proposed, including the level of conservation of mass, momentum, energy, concentration of components and electric potential. A block diagram of the reproduction of physical processes in the American baking chamber of the oven is proposed. The influence of the main parameters on the baking of products is presented through fundamental level models. The baking model describes a system of connected nonlinear levels. A set of constitutive relations detailing the behavior of a multicomponent system is revealed. It is shown that such a model provides a unified basis for the analysis of thermal, hydrodynamic, mass transfer, and electrophysical processes in a wide range of devices: ovens, dryers, reactors, and other equipped food production facilities.
- 15 April 2026
- Published by Odesa National University of Technology in Food Science and Technology
- Vol. 20 (1) , 144-154
PROCESSES OF BREAD BAKING IN OVEN CHAMBERS: CONTINUA-DISCRETE MODELING
The paper substantiates the relevance of creating a universal mathematical model capable of describing a set of physical and technological processes occurring in multiphase and structurally inhomogeneous media under the action of heat flows. It is shown that the simultaneous presence of continuous phases (solids, liquids, gases) and discrete components (bulk materials, granules, local inclusions) requires the use of a continuous-discrete formulation of the problem. An Euler approach to the description of mass, heat and momentum transfer is proposed, including the level of conservation of mass, momentum, energy, concentration of components and electric potential. A block diagram of the reproduction of physical processes in the American baking chamber of the oven is proposed. The influence of the main parameters on the baking of products is presented through fundamental level models. The baking model describes a system of connected nonlinear levels. A set of constitutive relations detailing the behavior of a multicomponent system is revealed. It is shown that such a model provides a unified basis for the analysis of thermal, hydrodynamic, mass transfer, and electrophysical processes in a wide range of devices: ovens, dryers, reactors, and other equipped food production facilities.
- Open Access
- 20 June 2024
- Published by DKS Center in Efektyvna ekonomika
- No. 6
ОСОБЛИВОСТІ ТА ПЕРСПЕКТИВИ РОЗВИТКУ КЕЙТЕРИНГУ В ЗАКАРПАТСЬКІЙ ОБЛАСТІ
- 20 June 2024
- Published by DKS Center in Efektyvna ekonomika
- No. 6
Open AccessОСОБЛИВОСТІ ТА ПЕРСПЕКТИВИ РОЗВИТКУ КЕЙТЕРИНГУ В ЗАКАРПАТСЬКІЙ ОБЛАСТІ
- Open Access
- 29 February 2024
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 18, 251-267
Innovative thermodynamic modeling for enhanced yeast dough mixing: energy perspectives and applications
A thermodynamic model for the calculation of energy exchange in the chamber of a new mixer with effective use of structural and technological parameters of the mixing process without the necessary introduction of experimental data correlations in the distribution of fluid velocities is proposed, which determines the relevance of this direction of calculation with the perspective of its development. The purpose of the presented work is to determine the specific power by substantiating the effective mode parameters of the preparation of the mixture (dough) as a result of evaluating the thermodynamic energy parameters of the kneading process. The assessment was carried out by developing a methodology for determining specific costs for creating a viscous medium when mixing components, which allows you to establish the required power depending on the design and technological parameters of the new mixer. The considered principle of the proposed open-type thermodynamic system of the description of the working process of mixing made it possible to reveal and determine the ways of converting energy into useful work of interphase heat and mass transfer of a heterogeneous medium. In the conditions of circulation mixing with multiple mechanical effects on the mixture of components in the closed circuit of the cylindrical working chamber, which is an effective way to achieve homogeneity of the environment, it was possible to obtain an analytical determination of the specific work and power of the drive in the absence of a clear description of the model of the interconnection of components. The proposed thermodynamic description of the system's energy balance allows to perform only a few experiments. In general, the practical value of the given calculations is of practical importance for improving productivity and efficiency and minimizing energy consumption for the process while reducing the dynamic loads of the designed mixer.
- 29 February 2024
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 18, 251-267
Open AccessInnovative thermodynamic modeling for enhanced yeast dough mixing: energy perspectives and applications
A thermodynamic model for the calculation of energy exchange in the chamber of a new mixer with effective use of structural and technological parameters of the mixing process without the necessary introduction of experimental data correlations in the distribution of fluid velocities is proposed, which determines the relevance of this direction of calculation with the perspective of its development. The purpose of the presented work is to determine the specific power by substantiating the effective mode parameters of the preparation of the mixture (dough) as a result of evaluating the thermodynamic energy parameters of the kneading process. The assessment was carried out by developing a methodology for determining specific costs for creating a viscous medium when mixing components, which allows you to establish the required power depending on the design and technological parameters of the new mixer. The considered principle of the proposed open-type thermodynamic system of the description of the working process of mixing made it possible to reveal and determine the ways of converting energy into useful work of interphase heat and mass transfer of a heterogeneous medium. In the conditions of circulation mixing with multiple mechanical effects on the mixture of components in the closed circuit of the cylindrical working chamber, which is an effective way to achieve homogeneity of the environment, it was possible to obtain an analytical determination of the specific work and power of the drive in the absence of a clear description of the model of the interconnection of components. The proposed thermodynamic description of the system's energy balance allows to perform only a few experiments. In general, the practical value of the given calculations is of practical importance for improving productivity and efficiency and minimizing energy consumption for the process while reducing the dynamic loads of the designed mixer.
- Open Access
- 16 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Innovation researches in students’ scientific work
- No. 2,p. 59-67
DEFINITION OF METHODOLOGY FOR FORMATION OF PROFESSIONAL SKILLS IN THE APPLICATION OF INNOVATIVE TECHNOLOGIES IN FUTURE RESTAURANT BUSINESS TECHNOLOGISTS
У статті використано теоретичні та емпіричні методи дослідження: розглянуто сутність понять «інновація», «інноваційна діяльність», «інноваційний процес» тощо. Досліджено класифікації інновацій за різними ознаками. Впровадження інноваційної складової в технологію харчування та пропозиція спеціальних послуг, застосування інтерактивного меню екранного планшета на столах, сенсорний дисплей, застосування QR-коду в маркетингу підприємства, світлодіодна технологія У статті аналізується оповіщення, харчові 3D-принтери, сенсорні виробники їжі, використання тривимірних проекцій для демонстрації приготування страв, автоматизація та інформатизація процесів на підприємствах, використання веб- і телекомунікаційних технологій. Основними напрямами розвитку сучасних технологій в закладах ресторанного господарства є: створення ресторанів як Free Floor; відкриття фуд-кортів; створення концептуальних підприємств ресторанного господарства; розширення мережі віртуальних ресторанів, що забезпечують замовлення в Інтернеті та доставку до споживача; приготування страв у присутності відвідувачів; організація обслуговування систем харчування та інші. Нові ідеї, передові ресторанні продукти та послуги, технологічні процеси, форми організації та управління стануть результатом інноваційного розвитку закладів ресторанного господарства. Впровадження інновацій коштує недешево, проте, пропонуючи клієнтам ексклюзивні меню та послуги, ресторанні заклади здатні забезпечити виживання та прибуток. Процеси якісної трансформації сфери в цілому та забезпечення конкурентоспроможності окремих її об'єктів є результатом впровадження інноваційних технологій надання послуг та формування сервісу відповідно до сучасних вимог. Інноваційний розвиток ресторанних технологій підвищує конкурентоспроможність закладу в сучасних суворих умовах. Необхідно звернути увагу на основні сучасні тенденції розвитку науки та обладнання, новинки та винаходи в харчовій сфері та на ринку послуг.
- 16 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Innovation researches in students’ scientific work
- No. 2,p. 59-67
Open AccessDEFINITION OF METHODOLOGY FOR FORMATION OF PROFESSIONAL SKILLS IN THE APPLICATION OF INNOVATIVE TECHNOLOGIES IN FUTURE RESTAURANT BUSINESS TECHNOLOGISTS
У статті використано теоретичні та емпіричні методи дослідження: розглянуто сутність понять «інновація», «інноваційна діяльність», «інноваційний процес» тощо. Досліджено класифікації інновацій за різними ознаками. Впровадження інноваційної складової в технологію харчування та пропозиція спеціальних послуг, застосування інтерактивного меню екранного планшета на столах, сенсорний дисплей, застосування QR-коду в маркетингу підприємства, світлодіодна технологія У статті аналізується оповіщення, харчові 3D-принтери, сенсорні виробники їжі, використання тривимірних проекцій для демонстрації приготування страв, автоматизація та інформатизація процесів на підприємствах, використання веб- і телекомунікаційних технологій. Основними напрямами розвитку сучасних технологій в закладах ресторанного господарства є: створення ресторанів як Free Floor; відкриття фуд-кортів; створення концептуальних підприємств ресторанного господарства; розширення мережі віртуальних ресторанів, що забезпечують замовлення в Інтернеті та доставку до споживача; приготування страв у присутності відвідувачів; організація обслуговування систем харчування та інші. Нові ідеї, передові ресторанні продукти та послуги, технологічні процеси, форми організації та управління стануть результатом інноваційного розвитку закладів ресторанного господарства. Впровадження інновацій коштує недешево, проте, пропонуючи клієнтам ексклюзивні меню та послуги, ресторанні заклади здатні забезпечити виживання та прибуток. Процеси якісної трансформації сфери в цілому та забезпечення конкурентоспроможності окремих її об'єктів є результатом впровадження інноваційних технологій надання послуг та формування сервісу відповідно до сучасних вимог. Інноваційний розвиток ресторанних технологій підвищує конкурентоспроможність закладу в сучасних суворих умовах. Необхідно звернути увагу на основні сучасні тенденції розвитку науки та обладнання, новинки та винаходи в харчовій сфері та на ринку послуг.
- Open Access
- 17 September 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 810-823
Formation of heat and mass transfer bonds when mixing components in a suspended state
The method of preparation of wheat paste based on discrete and impulse influence on components is revealed. The basis of the research of the vapors preparation method is the formation of a liquid mixture of interacting dosing components in a suspended state. The interaction occurs due to the humidification of the pulverulent suspended state of the layer of flour particles by a scattered jet of liquid under pressure. The development of this technological process and equipment is considered. A thorough analysis of the mixing of components in a suspended state. The influence of a set of experimental and theoretical researches is noted, where the results of the theoretical direction are aimed at the creation of mathematical models, simulation of the process with the use of the possibility of computer engineering. The characteristics of thermal processes for the transition region from the surface of the flour to the massive formed medium are given, taking into account the effective thermophysical characteristics of the medium in the form of dependences obtained theoretically and experimentally. Dependencies are taken into account as well as heat and mass transfer processes when the liquid phase interacts with flour: external heat and mass transfer processes when interacting in a suspended state on the flour surface and change of working environment with the formation of bonds, and internal mass transfer processes when moving moisture and heat inside the flour particle.
- 17 September 2021
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 15, 810-823
Open AccessFormation of heat and mass transfer bonds when mixing components in a suspended state
The method of preparation of wheat paste based on discrete and impulse influence on components is revealed. The basis of the research of the vapors preparation method is the formation of a liquid mixture of interacting dosing components in a suspended state. The interaction occurs due to the humidification of the pulverulent suspended state of the layer of flour particles by a scattered jet of liquid under pressure. The development of this technological process and equipment is considered. A thorough analysis of the mixing of components in a suspended state. The influence of a set of experimental and theoretical researches is noted, where the results of the theoretical direction are aimed at the creation of mathematical models, simulation of the process with the use of the possibility of computer engineering. The characteristics of thermal processes for the transition region from the surface of the flour to the massive formed medium are given, taking into account the effective thermophysical characteristics of the medium in the form of dependences obtained theoretically and experimentally. Dependencies are taken into account as well as heat and mass transfer processes when the liquid phase interacts with flour: external heat and mass transfer processes when interacting in a suspended state on the flour surface and change of working environment with the formation of bonds, and internal mass transfer processes when moving moisture and heat inside the flour particle.