Antonina Minorova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antonina Minorova has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Sergiy Narizhnyy
Bila Tserkva National Agrarian University
12 shared publications - Tatiana Rudakova
Institute of Food Resources of the National Academy of Sciences of Ukraine
11 shared publications - Iryna Romanchuk
Institute of Food Resources of the National Academy of Sciences of Ukraine
9 shared publications - Nataliia Krushelnytska
Institute of Food Resources of The National Academy of Agrarian Sciences of Ukraine
9 shared publications - Liudmyla Moiseieva
Institute of food resources of the national academy of sciences, Kyiv, Ukraine
7 shared publications Institute of Food Resources of National Academy of Agrarian Sciences of Ukraine
3 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 54-62
Determining the influence of thermal-mechanical treatment on the structure formation of low-calorie dairy desserts
This study investigates the process of making low-calorie dairy desserts based on buttermilk and retentate using multicomponent stabilization systems containing protein and carbohydrate components. The influence of the modes of thermomechanical processing of the milk mixture on the structure formation of dairy desserts and the formation of complexes between protein and carbohydrate components in the stabilization system remains incompletely explored. It has been established that thermomechanical processing of the milk mixture at a temperature of 85°C and a mixer rotation speed of 2800 rpm made it possible to obtain dessert samples with the most acceptable organoleptic indicators. The viscosity of the cream and pudding based on buttermilk was 2950 mPa·s and 8120 mPa·s, respectively; based on retentate – 4150 mPa·s and 10050 mPa·s, respectively. It has been proven that the interaction of the components in the stabilizer during thermomechanical treatment leads to the formation of "protein-polysaccharide" complexes with the subsequent formation of a homogeneous structure of the dairy dessert. Thus, in the case of pudding production, particles with a size of 50–100 microns made up to 60%, based on the retentate, up to 90% – based on the buttermilk. In the case of cream production, particles with a size of 50–100 microns made up to 80%, based on the retentate; less than 10 microns – up to 90% – based on the buttermilk. A positive effect of the combination of protein and carbohydrate components in the stabilization system on the structural indicators of dairy desserts with the formation of protein-carbohydrate complexes has been established. The results could be used by dairy processing enterprises when developing structured dairy products for dessert purposes using protein milk raw materials and polysaccharides as structure-forming agents and stabilizers
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 54-62
Open AccessDetermining the influence of thermal-mechanical treatment on the structure formation of low-calorie dairy desserts
This study investigates the process of making low-calorie dairy desserts based on buttermilk and retentate using multicomponent stabilization systems containing protein and carbohydrate components. The influence of the modes of thermomechanical processing of the milk mixture on the structure formation of dairy desserts and the formation of complexes between protein and carbohydrate components in the stabilization system remains incompletely explored. It has been established that thermomechanical processing of the milk mixture at a temperature of 85°C and a mixer rotation speed of 2800 rpm made it possible to obtain dessert samples with the most acceptable organoleptic indicators. The viscosity of the cream and pudding based on buttermilk was 2950 mPa·s and 8120 mPa·s, respectively; based on retentate – 4150 mPa·s and 10050 mPa·s, respectively. It has been proven that the interaction of the components in the stabilizer during thermomechanical treatment leads to the formation of "protein-polysaccharide" complexes with the subsequent formation of a homogeneous structure of the dairy dessert. Thus, in the case of pudding production, particles with a size of 50–100 microns made up to 60%, based on the retentate, up to 90% – based on the buttermilk. In the case of cream production, particles with a size of 50–100 microns made up to 80%, based on the retentate; less than 10 microns – up to 90% – based on the buttermilk. A positive effect of the combination of protein and carbohydrate components in the stabilization system on the structural indicators of dairy desserts with the formation of protein-carbohydrate complexes has been established. The results could be used by dairy processing enterprises when developing structured dairy products for dessert purposes using protein milk raw materials and polysaccharides as structure-forming agents and stabilizers
- Open Access
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (142)) , 53-61
Determining the influence of taxifolin on pasteurized milk storage
This work investigates the quality indicators of pasteurized milk with the addition of taxifolin, which form its properties and affect the storage capacity of the product. Current market requires increased guarantees of product quality during its supply and sale in retail chains. Pasteurized milk has a limited shelf life, which predetermines search for new solutions to warrant its quality to the end consumer. The use of plant-based ingredients that have antioxidant and antibacterial properties in traditional products makes it possible to improve their quality and safety indicators, expand the range of dairy products with high biological activity. This study examines the influence of the bioflavonoid taxifolin on the development of the microbiota in pasteurized milk and the extension of its storage period. Positive dynamics in the decrease in the quantity of mesophilic aerobic and facultative anaerobic microorganisms in pasteurized milk with taxifolin have been noted. It was proven that the introduction of taxifolin inhibits the progress of microbiological processes. An increase in the number of microorganisms above the normalized value of 1x105 CFU/cm3 was registered after 35 days of whole milk storage, and after 14 days of low-fat milk storage. Based on the results of organoleptic, physicochemical, and microbiological characteristics, the guaranteed shelf life of pasteurized milk with taxifolin for consumption was established. It was proven that for low-fat pasteurized milk with taxifolin, the shelf life was extended by 7 days, for whole pasteurized milk with taxifolin – by 14 days. The positive effect of the bioflavonoid taxifolin on extending the specified shelf life of pasteurized milk was confirmed, provided that the taste characteristics, quality indicators, and product safety were preserved. This study's results could be used at milk processing enterprises when introducing the technology of pasteurized milk production
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (142)) , 53-61
Open AccessDetermining the influence of taxifolin on pasteurized milk storage
This work investigates the quality indicators of pasteurized milk with the addition of taxifolin, which form its properties and affect the storage capacity of the product. Current market requires increased guarantees of product quality during its supply and sale in retail chains. Pasteurized milk has a limited shelf life, which predetermines search for new solutions to warrant its quality to the end consumer. The use of plant-based ingredients that have antioxidant and antibacterial properties in traditional products makes it possible to improve their quality and safety indicators, expand the range of dairy products with high biological activity. This study examines the influence of the bioflavonoid taxifolin on the development of the microbiota in pasteurized milk and the extension of its storage period. Positive dynamics in the decrease in the quantity of mesophilic aerobic and facultative anaerobic microorganisms in pasteurized milk with taxifolin have been noted. It was proven that the introduction of taxifolin inhibits the progress of microbiological processes. An increase in the number of microorganisms above the normalized value of 1x105 CFU/cm3 was registered after 35 days of whole milk storage, and after 14 days of low-fat milk storage. Based on the results of organoleptic, physicochemical, and microbiological characteristics, the guaranteed shelf life of pasteurized milk with taxifolin for consumption was established. It was proven that for low-fat pasteurized milk with taxifolin, the shelf life was extended by 7 days, for whole pasteurized milk with taxifolin – by 14 days. The positive effect of the bioflavonoid taxifolin on extending the specified shelf life of pasteurized milk was confirmed, provided that the taste characteristics, quality indicators, and product safety were preserved. This study's results could be used at milk processing enterprises when introducing the technology of pasteurized milk production
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (140)) , 72-82
Determining the optimal composition of stabilization systems in structured low-calorie dairy desserts with protein and carbohydrogen components
This study investigates structured low-calorie dairy desserts with multicomponent stabilization systems, including protein and carbohydrate components. The issue of the ratio of stabilization systems' components and their influence on the structural-mechanical and organoleptic characteristics of the product remains insufficiently studied. The lack of substantiated mathematical models complicates the targeted design of recipes with predefined properties. Mathematical models of the dependence of viscosity on the ratio of components in the stabilization system have been constructed. For puddings with the "gelatin-starch-rice flour" system, the effective viscosity based on buttermilk was 12717–14381 mPa·s, based on retentate – 18220–25864 mPa·s. For creams with the "pectin-inulin-whey" system – 3640–5063 mPa·s and 4097–5836 mPa·s, respectively. Organoleptic and physicochemical indicators confirmed that the optimized stabilization systems provide a stable structure of desserts with proper organoleptic characteristics and high moisture retention capacity. It was established that the interaction of protein molecules with polysaccharide chains during thermomechanical processing leads to the formation of a stable gel structure and an increase in water-binding capacity. Taking these interactions into account in mathematical models has made it possible to determine the optimal composition of stabilization systems. The effectiveness of combining rice flour, starch, and gelatin for structuring pudding; inulin, pectin, and demineralized whey for cream was confirmed by mathematical modeling. The results could be used by dairy processing enterprises when devising low-calorie products with a predefined structure.
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (140)) , 72-82
Open AccessDetermining the optimal composition of stabilization systems in structured low-calorie dairy desserts with protein and carbohydrogen components
This study investigates structured low-calorie dairy desserts with multicomponent stabilization systems, including protein and carbohydrate components. The issue of the ratio of stabilization systems' components and their influence on the structural-mechanical and organoleptic characteristics of the product remains insufficiently studied. The lack of substantiated mathematical models complicates the targeted design of recipes with predefined properties. Mathematical models of the dependence of viscosity on the ratio of components in the stabilization system have been constructed. For puddings with the "gelatin-starch-rice flour" system, the effective viscosity based on buttermilk was 12717–14381 mPa·s, based on retentate – 18220–25864 mPa·s. For creams with the "pectin-inulin-whey" system – 3640–5063 mPa·s and 4097–5836 mPa·s, respectively. Organoleptic and physicochemical indicators confirmed that the optimized stabilization systems provide a stable structure of desserts with proper organoleptic characteristics and high moisture retention capacity. It was established that the interaction of protein molecules with polysaccharide chains during thermomechanical processing leads to the formation of a stable gel structure and an increase in water-binding capacity. Taking these interactions into account in mathematical models has made it possible to determine the optimal composition of stabilization systems. The effectiveness of combining rice flour, starch, and gelatin for structuring pudding; inulin, pectin, and demineralized whey for cream was confirmed by mathematical modeling. The results could be used by dairy processing enterprises when devising low-calorie products with a predefined structure.
- Open Access
- 23 December 2024
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 12 (23) , 8-15
BIODEGRADABLE FOOD PACKAGING: INSTITUTIONAL AND SOCIAL ASPECTS
Subject. Consumers’ attitudes to the use of biodegradable food packaging materials as an alternative to conventional plastics, focusing on institutional and social aspects, including environmental challenges, consumer benefits, and barriers to adoption. Challenges of the environmental impact of traditional plastic packaging and the possibility of replacing it with biodegradable materials made from organic raw materials to reduce the environmental burden are studied. Purpose. To analyze consumer willingness to buy products in biodegradable packaging, in particular to assess the factors influencing their choice and to identify the barriers that hinder wider use of such materials. Methods. A non-representative online survey of respondents of all ages was conducted. The methods of systematization, comparative analysis, and graphical methods of data visualization were used. Results. High consumer awareness of biodegradable packaging (89.5%) and a positive attitude towards its use were revealed. However, despite the willingness to pay more, the majority are ready to pay a small surcharge (up to 10%). The main barriers include high price, limited range and lack of information. The survey also revealed support for changes in legislation to stimulate the wider use of biodegradable packaging. Scope of results: The results can be used by food manufacturers to make decisions on the transition to biodegradable packaging, as well as by regulators to formulate policies and develop appropriate programs to stimulate the use of such packaging in food industry practices and for information campaigns to raise consumer awareness.
- 23 December 2024
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 12 (23) , 8-15
Open AccessBIODEGRADABLE FOOD PACKAGING: INSTITUTIONAL AND SOCIAL ASPECTS
Subject. Consumers’ attitudes to the use of biodegradable food packaging materials as an alternative to conventional plastics, focusing on institutional and social aspects, including environmental challenges, consumer benefits, and barriers to adoption. Challenges of the environmental impact of traditional plastic packaging and the possibility of replacing it with biodegradable materials made from organic raw materials to reduce the environmental burden are studied. Purpose. To analyze consumer willingness to buy products in biodegradable packaging, in particular to assess the factors influencing their choice and to identify the barriers that hinder wider use of such materials. Methods. A non-representative online survey of respondents of all ages was conducted. The methods of systematization, comparative analysis, and graphical methods of data visualization were used. Results. High consumer awareness of biodegradable packaging (89.5%) and a positive attitude towards its use were revealed. However, despite the willingness to pay more, the majority are ready to pay a small surcharge (up to 10%). The main barriers include high price, limited range and lack of information. The survey also revealed support for changes in legislation to stimulate the wider use of biodegradable packaging. Scope of results: The results can be used by food manufacturers to make decisions on the transition to biodegradable packaging, as well as by regulators to formulate policies and develop appropriate programs to stimulate the use of such packaging in food industry practices and for information campaigns to raise consumer awareness.
- 28 November 2024
- Published by The Bila Tserkva National Agrarian University in Tehnologìâ virobnictva ì pererobki produktìv tvarinnictva
- No. 2 (190)
Study of structural and mechanical characteristics of dairy desserts with a combined composition of raw materials
Dairy products are complex in chemical composition and have a range of various properties that determine their quality. For a scientifically based consideration of these properties, information on the rheological characteristics of the product is necessary. Therefore, it is important to conduct research on the use of technological methods that allow for a targeted impact on the structural and mechanical characteristics of a dairy product and the effective management of quality indicators, particularly consistency. The aim of the study was to investigate the rheological characteristics of dairy desserts with a combined composition of raw materials. The article presents the results of research on determining the rheological parameters of pudding and cream made using whey protein concentrate, dry demineralized whey, inulin, pectin, rice flour, corn starch on various dairy raw materials. The rheological curves of dairy desserts indicate their structured nature. The structure of the retentate-based pudding is stronger than that of the butter-based product - its viscosity at a shear stress of 387.0 Pa is 205 Pa-s, which is 11% higher. The viscosity of the retentate-based cream is 102 Pa-s, which is 50.2 % less than that of the pudding. The structure of the buttermilk-based cream, which also requires the greatest effort to break and has the least elasticity, was found to be the least durable. It has been proven that dairy desserts show the ability to self-heal and belong to plastic-viscous coagulation systems according to the classification of Acad. PAS. Rebinder. It was established that the rheological viscosity curves of dairy desserts are characteristic of structured systems. It is shown that the structure of cream and pudding made on the basis of retentate is stronger. To preserve the structure of desserts, thermomechanical treatment at a shear rate of up to 50 s⁻¹ is recommended to minimize the destruction of bonds. Key words: dairy desserts, cream, pudding, buttermilk, retentate, combined composition of raw materials, structure, rheological parameters, strength, quality.
- 28 November 2024
- Published by The Bila Tserkva National Agrarian University in Tehnologìâ virobnictva ì pererobki produktìv tvarinnictva
- No. 2 (190)
Study of structural and mechanical characteristics of dairy desserts with a combined composition of raw materials
Dairy products are complex in chemical composition and have a range of various properties that determine their quality. For a scientifically based consideration of these properties, information on the rheological characteristics of the product is necessary. Therefore, it is important to conduct research on the use of technological methods that allow for a targeted impact on the structural and mechanical characteristics of a dairy product and the effective management of quality indicators, particularly consistency. The aim of the study was to investigate the rheological characteristics of dairy desserts with a combined composition of raw materials. The article presents the results of research on determining the rheological parameters of pudding and cream made using whey protein concentrate, dry demineralized whey, inulin, pectin, rice flour, corn starch on various dairy raw materials. The rheological curves of dairy desserts indicate their structured nature. The structure of the retentate-based pudding is stronger than that of the butter-based product - its viscosity at a shear stress of 387.0 Pa is 205 Pa-s, which is 11% higher. The viscosity of the retentate-based cream is 102 Pa-s, which is 50.2 % less than that of the pudding. The structure of the buttermilk-based cream, which also requires the greatest effort to break and has the least elasticity, was found to be the least durable. It has been proven that dairy desserts show the ability to self-heal and belong to plastic-viscous coagulation systems according to the classification of Acad. PAS. Rebinder. It was established that the rheological viscosity curves of dairy desserts are characteristic of structured systems. It is shown that the structure of cream and pudding made on the basis of retentate is stronger. To preserve the structure of desserts, thermomechanical treatment at a shear rate of up to 50 s⁻¹ is recommended to minimize the destruction of bonds. Key words: dairy desserts, cream, pudding, buttermilk, retentate, combined composition of raw materials, structure, rheological parameters, strength, quality.
- Open Access
- 26 December 2023
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 11 (21) , 9-23
OVERVIEW OF THE CURRENT STATE OF SCIENTIFIC RESEARCH AND PRACTICAL ACCESS IN THE AREAS OF BIOLOGICAL DAIRY PACKAGING
Subject. Packaging materials made from biodegradable plastics used for packaging dairy products, as well as the technological properties of these materials that allow their use. Purpose. To justification of the feasibility of using biodegradable packaging materials, in particular bioplastics, for packaging milk and dairy products. Methods. During the research, a systematic approach was used to research factual materials, in particular scientific and scientific-practical literature, regulatory legal acts, regulatory documents and the like; abstract-logical approach to the synthesis of research results and the formulation of conclusions. Results. The dairy industry uses biodegradable plastics; bio-based materials derived from renewable resources that can be used for dairy products with a limited shelf life. Biodegradable materials must protect the dairy product from environmental influences and ensure that quality is maintained during transportation and storage. In this sense, mechanical and barrier properties regarding oxygen, carbon dioxide, water, light and odors are important. You should also consider technological aspects of safety (migration, microbial growth), sustainability (heat and chemical resistance), process requirements (weldability and formability), convenience and compliance with marketing principles (communication, printing options). Acceptable mechanical properties are important, which ensure the quality and food safety of the dairy product even during long-term storage and transportation. The mechanical properties of polylactide (PLA) in semi-crystalline form are suitable, the mechanical properties of starch-polycaprolactone (PCL) are somewhat worse. Since hot fill and sterilization can be used for liquid dairy products with a long shelf life, it should be kept in mind that PLA containers are only stable up to a temperature of 55°C, while materials based on starch-PCL mixtures were stable between 60 and 90°C. Good water vapor barrier properties are critical when packaging dairy products such as butter and cheese, where preventing moisture loss and surface drying is key. Dairy products are often sour, salty or high in fat, it is important to evaluate the chemical resistance as acceptable for PLA. Some microorganisms can use bio-based packaging materials as energy sources. PLA biofilms prevent the growth of molds, and packaging materials based on starch-PCL promote the growth of molds that can affect food products – therefore, it is advisable to include antimicrobial compounds in the material. Migration, the transfer of substances from packaging to food products, according to standards should not exceed 10 mg/dm2. The analysis of scientific and technical information proves the possibility and feasibility of using biodegradable materials, in particular bioplastics, as innovative packaging materials for use in the dairy industry. These materials do not differ significantly in mechanical and other technological properties from traditional plastics made from hydrocarbon raw materials. For the practical research was used Soft cheese Kleo (produced in Latvia). It was packaged by the Ceramis®-PLA-SiOx coating film known as the first new biodegradable PLA film with improved barrier properties. However the tests on soft cheese packaging using Ceramis®-PLA-SiOx film gave a negative result, since this packaging material ensured the storage of a perishable product only for 10 days. Therefore, it is expedient to include other PLA films and other polymeric biodegradable materials. Scope of results. The results obtained will be used to improve production technologies for various types of dairy products, improve their food safety and quality, and also to preserve the environment by ensuring the biodegradability of packaging materials.
- 26 December 2023
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 11 (21) , 9-23
Open AccessOVERVIEW OF THE CURRENT STATE OF SCIENTIFIC RESEARCH AND PRACTICAL ACCESS IN THE AREAS OF BIOLOGICAL DAIRY PACKAGING
Subject. Packaging materials made from biodegradable plastics used for packaging dairy products, as well as the technological properties of these materials that allow their use. Purpose. To justification of the feasibility of using biodegradable packaging materials, in particular bioplastics, for packaging milk and dairy products. Methods. During the research, a systematic approach was used to research factual materials, in particular scientific and scientific-practical literature, regulatory legal acts, regulatory documents and the like; abstract-logical approach to the synthesis of research results and the formulation of conclusions. Results. The dairy industry uses biodegradable plastics; bio-based materials derived from renewable resources that can be used for dairy products with a limited shelf life. Biodegradable materials must protect the dairy product from environmental influences and ensure that quality is maintained during transportation and storage. In this sense, mechanical and barrier properties regarding oxygen, carbon dioxide, water, light and odors are important. You should also consider technological aspects of safety (migration, microbial growth), sustainability (heat and chemical resistance), process requirements (weldability and formability), convenience and compliance with marketing principles (communication, printing options). Acceptable mechanical properties are important, which ensure the quality and food safety of the dairy product even during long-term storage and transportation. The mechanical properties of polylactide (PLA) in semi-crystalline form are suitable, the mechanical properties of starch-polycaprolactone (PCL) are somewhat worse. Since hot fill and sterilization can be used for liquid dairy products with a long shelf life, it should be kept in mind that PLA containers are only stable up to a temperature of 55°C, while materials based on starch-PCL mixtures were stable between 60 and 90°C. Good water vapor barrier properties are critical when packaging dairy products such as butter and cheese, where preventing moisture loss and surface drying is key. Dairy products are often sour, salty or high in fat, it is important to evaluate the chemical resistance as acceptable for PLA. Some microorganisms can use bio-based packaging materials as energy sources. PLA biofilms prevent the growth of molds, and packaging materials based on starch-PCL promote the growth of molds that can affect food products – therefore, it is advisable to include antimicrobial compounds in the material. Migration, the transfer of substances from packaging to food products, according to standards should not exceed 10 mg/dm2. The analysis of scientific and technical information proves the possibility and feasibility of using biodegradable materials, in particular bioplastics, as innovative packaging materials for use in the dairy industry. These materials do not differ significantly in mechanical and other technological properties from traditional plastics made from hydrocarbon raw materials. For the practical research was used Soft cheese Kleo (produced in Latvia). It was packaged by the Ceramis®-PLA-SiOx coating film known as the first new biodegradable PLA film with improved barrier properties. However the tests on soft cheese packaging using Ceramis®-PLA-SiOx film gave a negative result, since this packaging material ensured the storage of a perishable product only for 10 days. Therefore, it is expedient to include other PLA films and other polymeric biodegradable materials. Scope of results. The results obtained will be used to improve production technologies for various types of dairy products, improve their food safety and quality, and also to preserve the environment by ensuring the biodegradability of packaging materials.
- Open Access
- 25 July 2022
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 30 (2) , 205-215
ІННОВАЦІЙНІ ПІДХОДИ ЩОДО ВИЗНАЧЕННЯ ФРУКТОЗИ В МОЛОЧНИХ ПРОДУКТАХ З КОМБІНОВАНИМ ВУГЛЕВОДНИМ СКЛАДОМ
Determination of carbohydrate content in food products, in particular dairy products, is necessary to solve various applications, including quality control. There are currently no techniques or methods for determining fructose in dairy products with a combined carbohydrate composition, including for baby food. Given the multicomponent composition of dairy products for baby food, there is a need to separate carbohydrates, in particular fructose, from the components included in the matrices of the analyzed sample and create certain difficulties for its quantification. The aim was to apply innovative approaches to develop a method of extraction and use of the resorcinol method for the determination of fructose in dairy products with a combined carbohydrate composition, including for baby food. The founded that according to the absorption spectra of the filtrate reaction products obtained by various methods, the maximum absorption in the visible region of the spectrum is λmax = 415-420 nm. It was found that the value of the mass fraction of fructose in the filtrates obtained by precipitation of the product solutions for the polarimetric method with the destruction of lactose, correlate with each other, namely, the value of the absolute error of the compared results is 0.02 and 0.03%, and the relative error is 0.6-0.73%. An innovative method for extracting fructose in dairy products with a combined carbohydrate composition, including for baby food, to determine its resorcinol method, proved the accuracy of the method and the reliability of the results in the filtrates obtained by precipitation of the product solutions for polarimetric method with lactose destruction.
- 25 July 2022
- Published by Oles Honchar Dnipropetrovsk National University in Journal of Chemistry and Technologies
- Vol. 30 (2) , 205-215
Open AccessІННОВАЦІЙНІ ПІДХОДИ ЩОДО ВИЗНАЧЕННЯ ФРУКТОЗИ В МОЛОЧНИХ ПРОДУКТАХ З КОМБІНОВАНИМ ВУГЛЕВОДНИМ СКЛАДОМ
Determination of carbohydrate content in food products, in particular dairy products, is necessary to solve various applications, including quality control. There are currently no techniques or methods for determining fructose in dairy products with a combined carbohydrate composition, including for baby food. Given the multicomponent composition of dairy products for baby food, there is a need to separate carbohydrates, in particular fructose, from the components included in the matrices of the analyzed sample and create certain difficulties for its quantification. The aim was to apply innovative approaches to develop a method of extraction and use of the resorcinol method for the determination of fructose in dairy products with a combined carbohydrate composition, including for baby food. The founded that according to the absorption spectra of the filtrate reaction products obtained by various methods, the maximum absorption in the visible region of the spectrum is λmax = 415-420 nm. It was found that the value of the mass fraction of fructose in the filtrates obtained by precipitation of the product solutions for the polarimetric method with the destruction of lactose, correlate with each other, namely, the value of the absolute error of the compared results is 0.02 and 0.03%, and the relative error is 0.6-0.73%. An innovative method for extracting fructose in dairy products with a combined carbohydrate composition, including for baby food, to determine its resorcinol method, proved the accuracy of the method and the reliability of the results in the filtrates obtained by precipitation of the product solutions for polarimetric method with lactose destruction.
- Open Access
- 24 June 2022
- Published by State University of Trade and Economics in INTERNATIONAL SCIENTIFIC-PRACTICAL JOURNAL COMMODITIES AND MARKETS
- Vol. 42 (2) , 70-78
Canned dairy: factors of increasing preservation
Introduction. The main criterion for the state of water in food is the indicator of "water activity" (Aw), which affects their quality and shelf life. Problem. At present, it is advisable to propose such changes in the recipe and technology of canned milk, which would reduce the rate of "water activity" and increase the osmotic pressure. The aim of the work is scientific substantiation of factors of canned milk preservation. Methods. Objects of scientific research – low-fat condensed low-lactose milk with a sugar content of 13, 16 and 31 %, the low-fat condensed milk with sugar by traditional technology was used as a control; dry milk multicomponent mixture with the addition of dry whey protein concentrate, as a control there was selected milk-carbohydrate mixture without protein component. Water activity (Aw) was determined on the device AguaLab-3TE, osmotic pressure – by cryoscopic method. The number of mesophilic aerobic and facultative anaerobic microorganisms was determined according to DSTU ISO 4833: 2006. Results. Samples of low-lactose condensed milk with mass fraction of 34 and 32 % and sugar content of 31 % in terms of osmotic pressure and "water activity" were the closest to traditional condensed milk with sugar and complied with current regulations on microbiological indicators. The dry whey protein concentrate, included into the formula of the dry milk multicomponent mixture, acts as a water-binding component, reducing the "water activity" to 0.290. Conclusions. The use of enzymatic hydrolysis of lactose with the use of the enzyme preparation β-galactosidase has a positive effect on the osmotic pressure and the indicator of "water activity". In the dry milk multicomponent mixture, the proposed dry whey protein concentrate as a water-binding component helps to reduce the rate of "water activity" and the number of microorganisms. The proposed changes in the technology and recipe of the investigated canned milk will allow to extend the shelf life of products.
- 24 June 2022
- Published by State University of Trade and Economics in INTERNATIONAL SCIENTIFIC-PRACTICAL JOURNAL COMMODITIES AND MARKETS
- Vol. 42 (2) , 70-78
Open AccessCanned dairy: factors of increasing preservation
Introduction. The main criterion for the state of water in food is the indicator of "water activity" (Aw), which affects their quality and shelf life. Problem. At present, it is advisable to propose such changes in the recipe and technology of canned milk, which would reduce the rate of "water activity" and increase the osmotic pressure. The aim of the work is scientific substantiation of factors of canned milk preservation. Methods. Objects of scientific research – low-fat condensed low-lactose milk with a sugar content of 13, 16 and 31 %, the low-fat condensed milk with sugar by traditional technology was used as a control; dry milk multicomponent mixture with the addition of dry whey protein concentrate, as a control there was selected milk-carbohydrate mixture without protein component. Water activity (Aw) was determined on the device AguaLab-3TE, osmotic pressure – by cryoscopic method. The number of mesophilic aerobic and facultative anaerobic microorganisms was determined according to DSTU ISO 4833: 2006. Results. Samples of low-lactose condensed milk with mass fraction of 34 and 32 % and sugar content of 31 % in terms of osmotic pressure and "water activity" were the closest to traditional condensed milk with sugar and complied with current regulations on microbiological indicators. The dry whey protein concentrate, included into the formula of the dry milk multicomponent mixture, acts as a water-binding component, reducing the "water activity" to 0.290. Conclusions. The use of enzymatic hydrolysis of lactose with the use of the enzyme preparation β-galactosidase has a positive effect on the osmotic pressure and the indicator of "water activity". In the dry milk multicomponent mixture, the proposed dry whey protein concentrate as a water-binding component helps to reduce the rate of "water activity" and the number of microorganisms. The proposed changes in the technology and recipe of the investigated canned milk will allow to extend the shelf life of products.