Matteo Lorenzoni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Matteo Lorenzoni has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
- Francesc Pérez-Murano
Institute of Microelectronics of Barcelona (IMB-CNM, CSIC), Bellaterra, Spain
20 shared publications Laura Evangelio
Institut de Microelectrònica de Barcelona (IMB-CNM, CSIC), C/Til·lers, Campus Universitat Autònoma de Barcelona, Cerdanyola del Vallès, Barcelona, Spain
8 shared publications- Jordi Fraxedas
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST, Campus UAB, Bellaterra, E-08193, Barcelona, Spain
7 shared publications - Marta Fernández-Regúlez
Institute of Microelectronics of Barcelona (IMB-CNM-CSIC)
5 shared publications - Bruno Torre
Dipartimento Scienza Applicata e Tecnologia (DISAT) Politecnico di Torino Corso Duca degli Abruzzi 24 10129 Torino Italy
4 shared publications Christophe Navarro
Arkema France, R.N. 117, BP34-64170 Lacq, France
4 shared publications
Latest Publications
- 5 November 2026
- Published by Wiley in Advanced Materials
Heterostructure Design in Two‐Dimensional Perovskites by Sequential Recrystallization
Low‐dimensional metal halide perovskites provide exciting opportunities to fabricate new semiconductor materials. Semiconductor technology relies on electronic heterojunctions, and cost‐efficient and flexible approaches to realize functional heterostructures are of fundamental importance. Lateral heterostructures define the energy landscape in the plane of the semiconducting lattice in 2D perovskite materials, representing an ideal platform to tailor energy barriers and to control charge carrier flow. Here, we demonstrate a versatile one‐pot synthesis to fabricate a large variety of 2D perovskite heterostructures based on different halides and/or metal cations. Exploiting sequential crystallization of different 2D perovskites and tuning the composition and injection events of the materials, enables the design of diverse heterostructure architectures, including multiple heterojunctions. We obtain heterostructures with high crystalline quality, multicolor emission, and optical coupling between the different heterostructure regions. We foresee that the design freedom of our method will stimulate the development of novel optoelectronic devices where electronic band engineering is crucial.
- 5 November 2026
- Published by Wiley in Advanced Materials
Heterostructure Design in Two‐Dimensional Perovskites by Sequential Recrystallization
Low‐dimensional metal halide perovskites provide exciting opportunities to fabricate new semiconductor materials. Semiconductor technology relies on electronic heterojunctions, and cost‐efficient and flexible approaches to realize functional heterostructures are of fundamental importance. Lateral heterostructures define the energy landscape in the plane of the semiconducting lattice in 2D perovskite materials, representing an ideal platform to tailor energy barriers and to control charge carrier flow. Here, we demonstrate a versatile one‐pot synthesis to fabricate a large variety of 2D perovskite heterostructures based on different halides and/or metal cations. Exploiting sequential crystallization of different 2D perovskites and tuning the composition and injection events of the materials, enables the design of diverse heterostructure architectures, including multiple heterojunctions. We obtain heterostructures with high crystalline quality, multicolor emission, and optical coupling between the different heterostructure regions. We foresee that the design freedom of our method will stimulate the development of novel optoelectronic devices where electronic band engineering is crucial.
- Open Access
- 9 February 2026
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 17, 275-291
Advancing nanolithography: a comprehensive review of materials for local anodic oxidation with AFM
Local anodic oxidation (LAO), also known as local oxidation nanolithography or oxidation scanning probe lithography has emerged as a versatile technique for nanoscale patterning, leveraging the precision of scanning probe microscopy, relying specifically on atomic force microscopy. This review explores the materials utilized in LAO experiments, including semiconductors, metals, insulators, two-dimensional (2D) materials, and emerging heterostructures. Semiconductors such as silicon and silicon carbide remain foundational due to their controllable oxidation kinetics, while metals like titanium and aluminum offer opportunities for plasmonic and optical applications. 2D materials, including graphene, graphene oxide, and transition metal dichalcogenides, demonstrate unique oxidation behaviors, enabling high-resolution applications in electronics and quantum devices. Recent advancements, such as electrode-free LAO, have expanded the range of applicable materials and improved the precision and scalability of the process. This paper also aims to provide a comprehensive understanding of material selection in LAO and its implications for advancing nanotechnology.
- 9 February 2026
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 17, 275-291
Open AccessAdvancing nanolithography: a comprehensive review of materials for local anodic oxidation with AFM
Local anodic oxidation (LAO), also known as local oxidation nanolithography or oxidation scanning probe lithography has emerged as a versatile technique for nanoscale patterning, leveraging the precision of scanning probe microscopy, relying specifically on atomic force microscopy. This review explores the materials utilized in LAO experiments, including semiconductors, metals, insulators, two-dimensional (2D) materials, and emerging heterostructures. Semiconductors such as silicon and silicon carbide remain foundational due to their controllable oxidation kinetics, while metals like titanium and aluminum offer opportunities for plasmonic and optical applications. 2D materials, including graphene, graphene oxide, and transition metal dichalcogenides, demonstrate unique oxidation behaviors, enabling high-resolution applications in electronics and quantum devices. Recent advancements, such as electrode-free LAO, have expanded the range of applicable materials and improved the precision and scalability of the process. This paper also aims to provide a comprehensive understanding of material selection in LAO and its implications for advancing nanotechnology.
- Open Access
- 15 August 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (19)
Fe(III)‐Mediated Formation of Cu Nanoinclusions and Local Heterojunctions in CuWO4 Photoanodes
Enhancing the photoelectrochemical (PEC) performance of CuWO4 photoanodes has typically relied on doping or co‐catalyst strategies to improve charge carrier dynamics. In this work, an alternative approach is presented in which Fe(III) acts as a self‐assembly mediator during hydrothermal synthesis, enabling the formation of a core–shell heterostructure composed of a crystalline CuWO4 core, a partially amorphous CuO/WO3 shell, and embedded metallic Cu nanoinclusions. Rather than functioning as a dopant or co‐catalyst, Fe(III) is completely removed during post‐synthetic treatment, mediating a redox‐guided phase reorganization without being incorporated into the final material. This architecture establishes local heterojunctions that facilitate charge separation, suppress recombination, and enhance oxygen evolution reaction (OER) activity. A relative increase of ≈30‐fold in photocurrent is observed compared to pristine CuWO4, as confirmed by structural, spectroscopic, and electrochemical analyses. While absolute photocurrents remain modest, this enhancement reflects intrinsic modifications in charge transport and recombination behavior driven by Fe(III)‐mediated structural reorganization. Complementary photocatalytic dye degradation experiments reveal that Fe‐activated particles act as highly efficient ROS‐generating catalysts in suspension, demonstrating functionality beyond thin‐film devices. These findings offer a new paradigm for oxide photoanode design, leveraging Fe(III)‐induced self‐assembly to engineer multifunctional heterostructures without relying on conventional doping.
- 15 August 2025
- Published by Wiley in Advanced Materials Interfaces
- Vol. 12 (19)
Open AccessFe(III)‐Mediated Formation of Cu Nanoinclusions and Local Heterojunctions in CuWO4 Photoanodes
Enhancing the photoelectrochemical (PEC) performance of CuWO4 photoanodes has typically relied on doping or co‐catalyst strategies to improve charge carrier dynamics. In this work, an alternative approach is presented in which Fe(III) acts as a self‐assembly mediator during hydrothermal synthesis, enabling the formation of a core–shell heterostructure composed of a crystalline CuWO4 core, a partially amorphous CuO/WO3 shell, and embedded metallic Cu nanoinclusions. Rather than functioning as a dopant or co‐catalyst, Fe(III) is completely removed during post‐synthetic treatment, mediating a redox‐guided phase reorganization without being incorporated into the final material. This architecture establishes local heterojunctions that facilitate charge separation, suppress recombination, and enhance oxygen evolution reaction (OER) activity. A relative increase of ≈30‐fold in photocurrent is observed compared to pristine CuWO4, as confirmed by structural, spectroscopic, and electrochemical analyses. While absolute photocurrents remain modest, this enhancement reflects intrinsic modifications in charge transport and recombination behavior driven by Fe(III)‐mediated structural reorganization. Complementary photocatalytic dye degradation experiments reveal that Fe‐activated particles act as highly efficient ROS‐generating catalysts in suspension, demonstrating functionality beyond thin‐film devices. These findings offer a new paradigm for oxide photoanode design, leveraging Fe(III)‐induced self‐assembly to engineer multifunctional heterostructures without relying on conventional doping.
- Open Access
- 13 May 2025
- Published by Elsevier in Materials Today Bio
- Vol. 32
A photo-inducible nano-switch for spatiotemporal controlled gene editing activation
- 13 May 2025
- Published by Elsevier in Materials Today Bio
- Vol. 32
Open AccessA photo-inducible nano-switch for spatiotemporal controlled gene editing activation
- Open Access
- 27 June 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (29) , 14128-14138
Towards molecular electronic devices based on ‘all-carbon’ wires
Nascent molecular electronic devices based on linear ‘all-carbon’ wires attached to gold electrodes through robust and reliable C–Au contacts are prepared via efficient in situ sequential cleavage of trimethylsilyl end groups from an oligoyne, Me3Si–(CC)4–SiMe3 (1). In the first stage of the fabrication process, removal of one trimethylsilyl (TMS) group in the presence of a gold substrate, which ultimately serves as the bottom electrode, using a stoichiometric fluoride-driven process gives a highly-ordered monolayer, Au|CCCCCCCCSiMe3 (Au|C8SiMe3). In the second stage, treatment of Au|C8SiMe3 with excess fluoride results in removal of the remaining TMS protecting group to give a modified monolayer Au|CCCCCCCCH (Au|C8H). The reactive terminal CC–H moiety in Au|C8H can be modified by ‘click’ reactions with (azidomethyl)ferrocene (N3CH2Fc) to introduce a redox probe, to give Au|C6C2N3HCH2Fc. Alternatively, incubation of the modified gold substrate supported monolayer Au|C8H in a solution of gold nanoparticles (GNPs), results in covalent attachment of GNPs on top of the film via a second alkynyl carbon–Au σ-bond, to give structures Au|C8|GNP in which the monolayer of linear, ‘all-carbon’ C8 chains is sandwiched between two macroscopic gold contacts. The covalent carbon–surface bond as well as the covalent attachment of the metal particles to the monolayer by cleavage of the alkyne C–H bond is confirmed by surface-enhanced Raman scattering (SERS). The integrity of the carbon chain in both Au|C6C2N3HCH2Fc systems and after formation of the gold top-contact electrode in Au|C8|GNP is demonstrated through electrochemical methods. The electrical properties of these nascent metal–monolayer–metal devices Au|C8|GNP featuring ‘all-carbon’ molecular wires were characterised by sigmoidal I–V curves, indicative of well-behaved junctions free of short circuits.
- 27 June 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (29) , 14128-14138
Open AccessTowards molecular electronic devices based on ‘all-carbon’ wires
Nascent molecular electronic devices based on linear ‘all-carbon’ wires attached to gold electrodes through robust and reliable C–Au contacts are prepared via efficient in situ sequential cleavage of trimethylsilyl end groups from an oligoyne, Me3Si–(CC)4–SiMe3 (1). In the first stage of the fabrication process, removal of one trimethylsilyl (TMS) group in the presence of a gold substrate, which ultimately serves as the bottom electrode, using a stoichiometric fluoride-driven process gives a highly-ordered monolayer, Au|CCCCCCCCSiMe3 (Au|C8SiMe3). In the second stage, treatment of Au|C8SiMe3 with excess fluoride results in removal of the remaining TMS protecting group to give a modified monolayer Au|CCCCCCCCH (Au|C8H). The reactive terminal CC–H moiety in Au|C8H can be modified by ‘click’ reactions with (azidomethyl)ferrocene (N3CH2Fc) to introduce a redox probe, to give Au|C6C2N3HCH2Fc. Alternatively, incubation of the modified gold substrate supported monolayer Au|C8H in a solution of gold nanoparticles (GNPs), results in covalent attachment of GNPs on top of the film via a second alkynyl carbon–Au σ-bond, to give structures Au|C8|GNP in which the monolayer of linear, ‘all-carbon’ C8 chains is sandwiched between two macroscopic gold contacts. The covalent carbon–surface bond as well as the covalent attachment of the metal particles to the monolayer by cleavage of the alkyne C–H bond is confirmed by surface-enhanced Raman scattering (SERS). The integrity of the carbon chain in both Au|C6C2N3HCH2Fc systems and after formation of the gold top-contact electrode in Au|C8|GNP is demonstrated through electrochemical methods. The electrical properties of these nascent metal–monolayer–metal devices Au|C8|GNP featuring ‘all-carbon’ molecular wires were characterised by sigmoidal I–V curves, indicative of well-behaved junctions free of short circuits.
- 1 June 2018
- Published by Elsevier in Applied Surface Science
- Vol. 442, 106-113
Sub-30 nm patterning of molecular resists based on crosslinking through tip based oxidation
- 1 June 2018
- Published by Elsevier in Applied Surface Science
- Vol. 442, 106-113
Sub-30 nm patterning of molecular resists based on crosslinking through tip based oxidation
- 10 October 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (44) , 445301
Suspended tungsten-based nanowires with enhanced mechanical properties grown by focused ion beam induced deposition
The implementation of three-dimensional (3D) nano-objects as building blocks for the next generation of electro-mechanical, memory and sensing nano-devices is at the forefront of technology. The direct writing of functional 3D nanostructures is made feasible by using a method based on focused ion beam induced deposition (FIBID). We use this technique to grow horizontally suspended tungsten nanowires and then study their nano-mechanical properties by three-point bending method with atomic force microscopy. These measurements reveal that these nanowires exhibit a yield strength up to 12 times higher than that of the bulk tungsten, and near the theoretical value of 0.1 times the Young’s modulus ( E ). We find a size dependence of E that is adequately described by a core–shell model, which has been confirmed by transmission electron microscopy and compositional analysis at the nanoscale. Additionally, we show that experimental resonance frequencies of suspended nanowires (in the MHz range) are in good agreement with theoretical values. These extraordinary mechanical properties are key to designing electro-mechanically robust nanodevices based on FIBID tungsten nanowires.
- 10 October 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (44) , 445301
Suspended tungsten-based nanowires with enhanced mechanical properties grown by focused ion beam induced deposition
The implementation of three-dimensional (3D) nano-objects as building blocks for the next generation of electro-mechanical, memory and sensing nano-devices is at the forefront of technology. The direct writing of functional 3D nanostructures is made feasible by using a method based on focused ion beam induced deposition (FIBID). We use this technique to grow horizontally suspended tungsten nanowires and then study their nano-mechanical properties by three-point bending method with atomic force microscopy. These measurements reveal that these nanowires exhibit a yield strength up to 12 times higher than that of the bulk tungsten, and near the theoretical value of 0.1 times the Young’s modulus ( E ). We find a size dependence of E that is adequately described by a core–shell model, which has been confirmed by transmission electron microscopy and compositional analysis at the nanoscale. Additionally, we show that experimental resonance frequencies of suspended nanowires (in the MHz range) are in good agreement with theoretical values. These extraordinary mechanical properties are key to designing electro-mechanically robust nanodevices based on FIBID tungsten nanowires.
- Open Access
- 21 September 2017
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 8 (1) , 1972-1981
Identifying the nature of surface chemical modification for directed self-assembly of block copolymers
In recent years, block copolymer lithography has emerged as a viable alternative technology for advanced lithography. In chemical-epitaxy-directed self-assembly, the interfacial energy between the substrate and each block copolymer domain plays a key role on the final ordering. Here, we focus on the experimental characterization of the chemical interactions that occur at the interface built between different chemical guiding patterns and the domains of the block copolymers. We have chosen hard X-ray high kinetic energy photoelectron spectroscopy as an exploration technique because it provides information on the electronic structure of buried interfaces. The outcome of the characterization sheds light onto key aspects of directed self-assembly: grafted brush layer, chemical pattern creation and brush/block co-polymer interface.
- 21 September 2017
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 8 (1) , 1972-1981
Open AccessIdentifying the nature of surface chemical modification for directed self-assembly of block copolymers
In recent years, block copolymer lithography has emerged as a viable alternative technology for advanced lithography. In chemical-epitaxy-directed self-assembly, the interfacial energy between the substrate and each block copolymer domain plays a key role on the final ordering. Here, we focus on the experimental characterization of the chemical interactions that occur at the interface built between different chemical guiding patterns and the domains of the block copolymers. We have chosen hard X-ray high kinetic energy photoelectron spectroscopy as an exploration technique because it provides information on the electronic structure of buried interfaces. The outcome of the characterization sheds light onto key aspects of directed self-assembly: grafted brush layer, chemical pattern creation and brush/block co-polymer interface.
- 16 August 2017
- Published by Wiley
- p. 211-223
Conductive Atomic Force Microscopy for Nanolithography Based on Local Anodic Oxidation
- 16 August 2017
- Published by Wiley
- p. 211-223
Conductive Atomic Force Microscopy for Nanolithography Based on Local Anodic Oxidation
- Open Access
- 19 April 2017
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 8 (1) , 883-891
Functional dependence of resonant harmonics on nanomechanical parameters in dynamic mode atomic force microscopy
We present a combined theoretical and experimental study of the dependence of resonant higher harmonics of rectangular cantilevers of an atomic force microscope (AFM) as a function of relevant parameters such as the cantilever force constant, tip radius and free oscillation amplitude as well as the stiffness of the sample’s surface. The simulations reveal a universal functional dependence of the amplitude of the 6th harmonic (in resonance with the 2nd flexural mode) on these parameters, which can be expressed in terms of a gun-shaped function. This analytical expression can be regarded as a practical tool for extracting qualitative information from AFM measurements and it can be extended to any resonant harmonics. The experiments confirm the predicted dependence in the explored 3–45 N/m force constant range and 2–345 GPa sample’s stiffness range. For force constants around 25 N/m, the amplitude of the 6th harmonic exhibits the largest sensitivity for ultrasharp tips (tip radius below 10 nm) and polymers (Young’s modulus below 20 GPa).
- 19 April 2017
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 8 (1) , 883-891
Open AccessFunctional dependence of resonant harmonics on nanomechanical parameters in dynamic mode atomic force microscopy
We present a combined theoretical and experimental study of the dependence of resonant higher harmonics of rectangular cantilevers of an atomic force microscope (AFM) as a function of relevant parameters such as the cantilever force constant, tip radius and free oscillation amplitude as well as the stiffness of the sample’s surface. The simulations reveal a universal functional dependence of the amplitude of the 6th harmonic (in resonance with the 2nd flexural mode) on these parameters, which can be expressed in terms of a gun-shaped function. This analytical expression can be regarded as a practical tool for extracting qualitative information from AFM measurements and it can be extended to any resonant harmonics. The experiments confirm the predicted dependence in the explored 3–45 N/m force constant range and 2–345 GPa sample’s stiffness range. For force constants around 25 N/m, the amplitude of the 6th harmonic exhibits the largest sensitivity for ultrasharp tips (tip radius below 10 nm) and polymers (Young’s modulus below 20 GPa).