Xichun Tian

This article presents an integrated approach for theoretical analysis and numerical modeling to investigate the mechanism of roof presplitting and its reasonable parameters in the hard roof and longwall top-coal caving face. The test site is located in the city of Jinzhong, Shanxi Province, China. The theoretical analysis results indicated that when the presplitting angle remains constant, the tensile stress at the unpenetrated surface is approximately exponentially distributed with the presplitting height. When the presplitting height remains constant, the variation curve of tensile stress at the unpenetrated surface with the presplitting angle is parabolic. As the presplitting height increases, the presplitting angle required for the tensile stress at the unpenetrated face to exceed the ultimate tensile strength of limestone first increases and then decreases. The ground response of retained entry obtained with numerical modeling confirmed the theoretical analysis results. Meanwhile, numerical modeling results also showed that presplitting height affects the volume of the collapse gangues and the structure of the overlying strata above the retained entry. The presplitting angle is effective in reducing the frictional resistance between the collapse gangue and roof structure of retained entry. Moreover, based on the ground response of the retained entries, the reasonable parameters of the roof presplitting were determined at 17 m and 15°. The field application showed that reasonable roof presplitting parameters could achieve satisfactory effects at pressure relief and retained entry in the longwall top-coal caving panel. Furthermore, the proposed design principle of the roof presplitting technique can be applied to other projects.

Under the conditions of high ground stress and mining disturbance, the strata breakage that is induced by mining is severe. Thus, it is critical to investigate the structural characteristics of key strata (KS) in deep thick mining. This study introduces an innovative technology, namely, directional blasting fracturing, in which an energy-gathering tube is installed in a borehole and an explosive is detonated to break the roof in a specified direction. A theory of balanced bulk filling is established based on the requirements of developing a voussoir beam structure, which can be used to effectively evaluate the percentage of bulk filling in gob and to determine to which structure the key strata belongs. Based on this theory, two types of novel structural models in the advancing and lateral directions of the longwall face are established and defined for studying the roof fracturing mechanism. Compared with a cantilever structure, Model C can develop a stable voussoir beam structure, limiting the rotation space of the KS and reducing both the peak abutment pressure and the dynamic disturbance time in the advancing of the longwall face. Model E is defined as when the technology of directional blasting fracturing effectively cuts a stress transfer path into the barrier pillar. The peak abutment pressures on the barrier pillar and auxiliary entry are smaller, and the dynamic disturbance time is shorter, which can effectively improve the stability of the auxiliary entry. The key parameters of directional blasting fracturing are designed and constructed, and they include the roof fracturing height, angle, and charge structure. The field application performance of this innovative technology at the longwall face of 3⁻¹101 in Hongqinghe coal mine was evaluated by analyzing the chock pressure stress, the pillar pressure stress, and the deformation of the auxiliary entry during mining, which lays a foundation for the application of this technology in coal mines in China.