Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhammad Sonny Abfertiawan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:

  • Marisa Handajani

    Water and Wastewater Engineering Research Group, Faculty of Civil and Environmental Engineering, Bandung Institute of Technology, Indonesia

    8 shared publications
  • Kris Pranoto

    Environmental Department, PT Kaltim Prima Coal, Indonesia

    6 shared publications
  • Mindriany Syafila

    Water and Wastewater Engineering Research Group, Faculty of Civil and Environmental Engineering, Bandung Institute of Technology, Indonesia

    6 shared publications
  • Faiz Hasan

    Water and Wastewater Engineering Research Group, Faculty of Civil and Environmental Engineering, Bandung Institute of Technology, Bandung, Indonesia

    5 shared publications
  • Yoseph Palinggi

    Environmental Department, PT Kaltim Prima Coal, Indonesia

    4 shared publications
  • Firman Gunawan

    Environmental Department, PT. Berau Coal, Berau Regency, Indonesia

    2 shared publications

Latest Publications

  • Open Access

    Fractionation and mobility of nickel between water–sediment interface in a mining-impacted tropical river basin

    by Ibtisani Farahnaz, Mindriany Syafila, Muhammad Sonny Abfertiawan, Marisa Handajani

    Nickel mining in high?rainfall tropical regions produces metal?rich runoff that can substantially alter biogeochemical processes at the water–sediment interface. However, the mechanisms governing nickel partitioning into dissolved, particulate, and sedimentary geochemical fractions in tropical river systems remain insufficiently resolved. This study investigates the fractionation and mobility of Ni, Fe, Mn, Cr, Cu, and Zn in a mining?impacted river in North Maluku, Indonesia, by integrating dissolved–particulate metal separation in water with five?step sequential extraction in sediments. Most metals in sediments were predominantly bound to the residual (RES) fraction, reflecting strong lithogenic control and incorporation into mineral lattices. In contrast, the exchangeable (EXC) fraction—representing the most mobile geochemical phase—followed the order Ni > Zn > Cu > Cr > Mn > Fe, indicating higher potential mobility for nickel relative to other metals. River water showed elevated proportions of dissolved Ni compared to its particulate form, suggesting substantial anthropogenic contributions from mining?derived geochemical runoff. The contrasting dominance of residual?bound metals in sediments and dissolved metals in water highlights a dual?source system in which sedimentary metals are primarily geogenic, whereas dissolved metals are strongly influenced by mining effluents. These findings advance understanding of nickel behavior at the water–sediment interface in tropical rivers and provide a mechanistic basis for predicting metal mobility and ecological risks in mining?impacted environments.

  • Open Access

    Continuous Electrocoagulation Process for the Treatment of High Colloidal Clay in Coal Mine Water using Lab Scale Baffle Channel Reactor

    by Muhammad Sonny Abfertiawan, Althaf Gavin Azarya, Syarif Makki Zamani, Mindriany Syafila, Marisa Handajani

    The electrocoagulation (EC) process has been extensively studied in recent years for the removal of various contaminants present in wastewater, such as metals, organic materials, dyes, oils, pharmaceutical compounds, and other emerging pollutants. In the mining industry, EC development continues to be conducted for the removal of contaminants in mine water, which is characterized by high acidity and suspended solids. This study aims to develop EC for the removal of suspended solids caused by the presence of colloidal clay from overburden during mining activities. EC was operated using a lab-scale baffle channel reactor with a volume of 15 liters in continuous mode, utilizing monopolar iron and aluminum electrode pairs. To obtain optimal performance, the study focused on the influence of three parameters affecting EC: current density (2 A, 4 A, and 6 A), electrode type (iron and aluminum), and residence time in the reactor (15 minutes, 30 minutes, and 45 minutes, equivalent to flow rates of 0.3, 0.5, and 1 LPM). The results demonstrated that the highest suspended solids removal of 99.66% occurred in the iron electrode reactor with a current strength of 6 amperes and an HRT of 45 minutes or a flow rate of 0.3 liters per minute. The reactor with aluminum electrodes achieved a removal percentage of 99.11% with a current strength of 6 amperes and an HRT of 15 minutes or a flow rate of 1 liter per minute. This research represents an advanced stage of batch operation in efforts to develop field-scale EC for the treatment of mine water with high colloidal clay content.

  • Open Access

    Continuous-Flow Electrocoagulation for Hexavalent Chromium Reduction in Nickel Mining Wastewater: Insights into Optimization and Mechanisms

    by Muhammad Risal Rusman, Muhammad Sonny Abfertiawan, Faiz Hasan, Mindriany Syafila, Marisa Handajani

    Indonesia’s extensive laterite nickel reserves drive substantial nickel mining activities yet pose environmental risks due to the wastewater’s hexavalent chromium (Cr(VI)) contamination. This study evaluates a continuous-flow electrocoagulation reactor, using aluminum and iron electrodes to remove Cr(VI) from nickel mining wastewater. Optimization via a Box-Behnken design examined current intensity, flow rate, and reactor flow distance. Results revealed that iron electrodes achieved superior Cr(VI) removal efficiency of up to 99% at a flow rate of 0.99 L/min, current intensity of 2 A, and reactor flow distance of 165,6 cm, whereas aluminum electrodes attained a maximum removal efficiency of 83% under optimal conditions of 2.9 A, 0.93 L/min, and 338 cm. Iron electrodes also demonstrated lower specific electrical energy consumption (0.48 kWh/g Cr(VI)) than aluminum (1.39 kWh/g Cr(VI)). Kinetic studies indicated that Cr(VI) removal on aluminum electrodes aligns with a pseudo-first-order model, while iron electrodes follow a second-order model, highlighting a shift from physical to chemical adsorption mechanisms. Adsorption isotherms further supported these findings, with Freundlich isotherms fitting the aluminum electrodes (R 2 = 0.998), suggesting heterogeneous, multilayer adsorption, and Langmuir isotherms fitting the iron electrodes (R 2 = 0.988), indicating homogeneous, monolayer adsorption. This study underscores electrocoagulation’s potential as an energy-efficient and sustainable solution for Cr(VI) removal in mining wastewater treatment.


  • Open Access

    From Acidic Water to Neutralization Process: Unravelling the Efficacy and Stability of Alkaline Agents for Acid Mine Drainage

    by Muhammad Sonny Abfertiawan

    Acid mine drainage (AMD) arises as a major environmental challenge in the mining industry, resulting from the reaction of sulphide minerals with oxygen and water to produce sulfuric acid. Evaluating and optimizing AMD neutralization methods is crucial for mitigating its environmental impact. This study assessed the effectiveness and stability of alkaline agents for neutralization, comparing caustic soda and hydrated lime in bench-scale laboratory experiments. Jar tests were performed by rapid mixing at 120 rpm for one minute, followed by slow mixing at 60 rpm for 20 minutes. The experiments showed increased AMD's pH after contact with neutralizing agents. The optimal doses were 815 mg/L for caustic soda, 1200 mg/L for hydrated lime, and 800 mg/L for a combination of 18%w/w hydrated lime and 82%w/w caustic soda. The stability of the neutralization process, evaluated using pH as an indicator, varied in the following order: hydrated lime, combination, and caustic soda. Hydrated lime demonstrated better stability than caustic soda. Interestingly, caustic soda caused a more rapid pH change when reintroducing AMD. This study provides insights into effective alkaline agents for the mining industry.

  • Open Access

    Electrocoagulation for nickel, chromium, and iron removal from mine water using aluminum electrodes

    by Muhammad Ghozali Harahap, Muhammad Sonny Abfertiawan, Mindriany Syafila, Marisa Handajani, Tonny H. Gultom


  • Open Access

    Batch Electrocoagulation Process for the Removal of High Colloidal Clay from Open-Cast Coal Mine Water Using Al and Fe Electrodes

    by Muhammad Sonny Abfertiawan, Mindriany Syafila, Marisa Handajani, Faiz Hasan, Hanifah Oktaviani, Firman Gunawan, Dan Febriwiadi Djali

    Open-cast coal mining operations can produce water with high amounts of total suspended solids (TSS). We tested the use of electrocoagulation for the removal of colloidal clay from mine water. Monopolar batch electrocoagulation was performed at the laboratory scale using Al and Fe electrodes and varying the DC current (0.5, 1, and 2 A) and contact time (15, 30, and 45 min). Aluminum electrode electrocoagulation with a current of 2 A and a contact time of 15 min had the greatest TSS removal efficiency (99%), with concentrations decreasing from 5,400 to 23 mg/L. The greatest removal (98 and 99%, respectively) was obtained using an Al electrode with an electric current of 0.5 and 1 A, with 30 min of contact time. With an Fe electrode, the greatest efficiency was achieved with a current of 2 A and a contact time of 30 min. The TSS removal efficiency reached 98% while the concentration dropped to 66 mg/L, followed by 89% and 95% for the 0.5 A-45 min and 1 A-15 min variations, respectively.


  • Open Access

    The application of artificial neural network model to predicting the acid mine drainage from long-term lab scale kinetic test

    by Muhammad Sonny Abfertiawan, Muchammad Daniyal Kautsar, Faiz Hasan, Yoseph Palinggi, Kris Pranoto

    Acid mine drainage (AMD) is one of the common environmental problems in the coal mining industry that was formed by the oxidation of sulfide minerals in the overburden or waste rock. The prediction of acid generation through AMD is important to do in overburden management and planning the post-mining land use. One of the methods used to predict AMD is a lab-scale kinetic test to determine the rate of acid formation over time using representative samples in the field. However, this test requires a long-time procedure and large amount of chemical reagents lead to inefficient cost. On the other hand, there is potential for machine learning to learn the pattern behind the lab-scale kinetic test data. This study describes an approach to use artificial neural network (ANN) modeling to predict the result from lab-scale kinetic tests. Various ANN model is used based on 83 weeks experiments of lab-scale kinetic tests with 100% potential acid-forming rock. The model approaches the monitoring of pH, ORP, conductivity, TDS, sulfate, and heavy metals (Fe and Mn). The overall Nash-Sutcliffe Efficiency (NSE) obtained in this study was 0.99 on training and validation data, indicating a strong correlation and accurate prediction compared to the actual lab-scale kinetic tests data. This show the ANN ability to learn patterns, trends, and seasonality from past data for accurate forecasting, thereby highlighting its significant contribution to solving AMD problems. This research is also expected to establish the foundation for a new approach to predict AMD, with time efficient, accurate, and cost-effectiveness in future applications.


  • Open Access

    Comparative study of long-term laboratory and field kinetic test for potential acid forming (PAF) materials

    by Muhammad Sonny Abfertiawan, Faiz Hasan, Yosef Palinggi, Kris Pranoto

    Acid Mine Drainage (AMD) comes from open pit and underground mining activities, characterized by high level of acidity and high metal solubility. AMD is formed from sulfide minerals that are exposed from mining activities, undergo oxidation by oxygen and contact with rainwater. AMD formation reaction rate must be studied to prevent AMD from being released to the environment. Reaction rate of acid formation can be determined by kinetic test. This study used the Free Draining Column Leach (FDCL) test method for the kinetic test, performed in laboratory scale and field scale. Laboratory scale experiment was done in a cylinder reactor, with 15 cm diameter and 35 cm height. Meanwhile the field scale was carried out in greater amount of rock material and reactor volume. The test was carried out in a weekly cycle for a total of 83 weeks. This study states that field scale experiments tend to produce higher concentrations of ORP, conductivity, sulfate, iron (Fe) and manganese (Mn) rather than the laboratory scale. The pH parameter on field scale experiment is around 1.91 to 3.18, meanwhile on the laboratory scale experiment is around 2.18 to 3.47. It can be interpreted that the field scale experiment tends to produce more acidic pH compared to the laboratory scale experiment. This research is expected to find the differences between laboratory scale and field scale experiments in long-term kinetic tests.


  • Open Access

    Batch Electrocoagulation Process for the Removal of High Colloidal Clay from Open-Cast Coal Mine Water using Al and Fe Electrodes

    by Muhammad Sonny Abfertiawan, Mindryani Syafila, Marisa Handajani, Faiz Hasan, Hanifah Oktaviani, Firman Gunawan, Febriwiadi Djali

    Open-cast coal mining, which involves massive excavation and stockpiling of overburden, has the potential to affect surface water quality. In addition to the potential generation of acid mine drainage owing to the presence of sulfide minerals, mining operations also have the potential to produce water with high total suspended solids (TSS) concentrations. This can occur owing to the presence of clay materials, especially colloidal clays, which prevent solid particles from settling naturally. This study aims to develop an alternative electrocoagulation technology that can be used to remove colloidal clay from mine water. Monopolar batch electrocoagulation was performed at a laboratory scale using aluminum and iron electrodes with variations in the current (0.5, 1, and 2 A) and contact time (15, 30, and 45 min). The results showed that aluminum electrode electrocoagulation, with a current of 2 A and a contact time of 15 min, had a TSS removal efficiency of 99.58%, with concentrations decreasing from 5,400 to 22.84 mg/L. Iron electrode electrocoagulation achieved the highest efficiency with a current of 2 A and a contact time of 30 min. The TSS removal efficiency reached 98.78% while the concentration dropped to 65.66 mg/L. This study is the initial stage to develop electrocoagulation technology. This technology may become an essential alternative for treating mine water with colloidal clay in the future.

  • Open Access

    A Comparison dataset on static test using two concentrations of hydrogen peroxide for prediction of acid mine drainage

    by Muhammad Sonny Abfertiawan, Yoseph Palinggi, Mindriany Syafila, Marisa Handajani, Kris Pranoto