Shao Qi Lim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Shao Qi Lim has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- James S. Williams
Australian National University
11 shared publications - Brett Cameron Johnson
RMIT University
9 shared publications - Jeffrey M. Warrender
U.S. Army DEVCOM—Armaments Center, Watervliet, NY 12189, United States of America
7 shared publications - Jeffrey Colin McCallum
The University of Melbourne
5 shared publications - Bruce Claflin
Air Force Research Laboratory, Sensors Directorate, Wright-Patterson Air Force Base 3 , Dayton, Ohio 45433
3 shared publications - Danielle Holmes
UNSW Sydney
3 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Dilute Pb in Ge materials fabricated by ion implantation and pulsed laser melting
Germanium lead (GePb) alloys have shown promising potential as a material platform for fabricating mid-infrared photodetectors, where the Pb content enables tuning of the bandgap. However, fabricating such devices using GePb is challenging because the equilibrium solid solubility of Pb in Ge is in the parts per million range. Here, we synthesize the metastable GePb alloy by Pb implantation into Ge, followed by pulsed laser melting. By varying the ion implantation and melting conditions, we identify a processing window that yields GePb alloy films of high crystalline quality, with a substitutional Pb amount of at least 1.6 × 1015 Pb atoms/cm2, which is equivalent to a Pb concentration of around 0.36 at. %, more than 3 orders of magnitude above the equilibrium solubility. These results establish a pathway to fabricating GePb for mid-infrared photodetection applications using non-equilibrium ion implantation, ultra-rapid melting, and solidification.
- 12 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Open AccessDilute Pb in Ge materials fabricated by ion implantation and pulsed laser melting
Germanium lead (GePb) alloys have shown promising potential as a material platform for fabricating mid-infrared photodetectors, where the Pb content enables tuning of the bandgap. However, fabricating such devices using GePb is challenging because the equilibrium solid solubility of Pb in Ge is in the parts per million range. Here, we synthesize the metastable GePb alloy by Pb implantation into Ge, followed by pulsed laser melting. By varying the ion implantation and melting conditions, we identify a processing window that yields GePb alloy films of high crystalline quality, with a substitutional Pb amount of at least 1.6 × 1015 Pb atoms/cm2, which is equivalent to a Pb concentration of around 0.36 at. %, more than 3 orders of magnitude above the equilibrium solubility. These results establish a pathway to fabricating GePb for mid-infrared photodetection applications using non-equilibrium ion implantation, ultra-rapid melting, and solidification.
- Open Access
- 9 June 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (23) , 230602
Coupling a Ge 73 Nuclear Spin to an Electrostatically Defined Quantum Dot in Silicon
Single nuclear spins in silicon are a promising resource for quantum technologies due to their long coherence times and excellent control fidelities. Qubits and qudits have been encoded on donor nuclei, with successful demonstrations of Bell states and quantum memories on the spin- / 2 1 P 31 and cat-qubits on the spin- / 2 7 Sb 123 nuclei. Isoelectronic nuclear spins coupled to gate-defined quantum dots, such as the naturally occurring Si 29 isotope, possess no additional charge and allow for the coupled electron to be shuttled without destroying the nuclear spin coherence. Here, we demonstrate the coupling of a spin- / 2 9 Ge 73 nuclear spin to a gate-defined quantum dot in SiMOS via Pauli spin blockade readout using rf reflectometry. We observe the hyperfine interaction (HFI) to the coupled quantum dot electron and are able to tune it from 180 to 350 kHz, through the voltages applied to the lateral gate electrodes. This smaller HFI combined with the faster readout enable easier quantum nondemolition readout of the nuclear spin state. Thus, this work lays the foundation for future spin control experiments on the spin- / 2 9 qudit as well as more advanced experiments such as entanglement distribution between distant nuclear spins or repeated weak measurements.
- 9 June 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (23) , 230602
Open AccessCoupling a Ge 73 Nuclear Spin to an Electrostatically Defined Quantum Dot in Silicon
Single nuclear spins in silicon are a promising resource for quantum technologies due to their long coherence times and excellent control fidelities. Qubits and qudits have been encoded on donor nuclei, with successful demonstrations of Bell states and quantum memories on the spin- / 2 1 P 31 and cat-qubits on the spin- / 2 7 Sb 123 nuclei. Isoelectronic nuclear spins coupled to gate-defined quantum dots, such as the naturally occurring Si 29 isotope, possess no additional charge and allow for the coupled electron to be shuttled without destroying the nuclear spin coherence. Here, we demonstrate the coupling of a spin- / 2 9 Ge 73 nuclear spin to a gate-defined quantum dot in SiMOS via Pauli spin blockade readout using rf reflectometry. We observe the hyperfine interaction (HFI) to the coupled quantum dot electron and are able to tune it from 180 to 350 kHz, through the voltages applied to the lateral gate electrodes. This smaller HFI combined with the faster readout enable easier quantum nondemolition readout of the nuclear spin state. Thus, this work lays the foundation for future spin control experiments on the spin- / 2 9 qudit as well as more advanced experiments such as entanglement distribution between distant nuclear spins or repeated weak measurements.
- Open Access
- 12 May 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (19)
Coherent all-optical control of the germanium vacancy in diamond
The germanium vacancy in diamond (GeV) is a promising candidate for color center based quantum networking. Yet, like for other group-IV vacancy defects in diamond, achieving fast, high-fidelity qubit operations using traditional magnetic resonance techniques is experimentally challenging due to a weak magnetic dipole and susceptibility to thermally induced decoherence. Here, we perform all-optical control of the GeV and realize Rabi frequencies exceeding ∼ 20 MHz. We do so by driving the two Λ -systems of the GeV simultaneously and apply this to probe the spin coherence ( T 2 * = 224 ± 14 ns, T 2 H = 11.9 ± 0.3 µ s ). Our control scheme is applicable to other color centers and particularly, other group-IV defects for which the scheme may be optimized to improve all-optical control in these systems.
- 12 May 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 113 (19)
Open AccessCoherent all-optical control of the germanium vacancy in diamond
The germanium vacancy in diamond (GeV) is a promising candidate for color center based quantum networking. Yet, like for other group-IV vacancy defects in diamond, achieving fast, high-fidelity qubit operations using traditional magnetic resonance techniques is experimentally challenging due to a weak magnetic dipole and susceptibility to thermally induced decoherence. Here, we perform all-optical control of the GeV and realize Rabi frequencies exceeding ∼ 20 MHz. We do so by driving the two Λ -systems of the GeV simultaneously and apply this to probe the spin coherence ( T 2 * = 224 ± 14 ns, T 2 H = 11.9 ± 0.3 µ s ). Our control scheme is applicable to other color centers and particularly, other group-IV defects for which the scheme may be optimized to improve all-optical control in these systems.
- Open Access
- 13 April 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Narrow magneto-optical transitions of erbium implanted into silicon carbide-on-insulator
- 13 April 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1)
Open AccessNarrow magneto-optical transitions of erbium implanted into silicon carbide-on-insulator
- Open Access
- 7 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Strong coupling of a superconducting flux qubit to single bismuth donors
The realization of a quantum computer represents a tremendous scientific and technological challenge due to the extreme fragility of quantum information. The physical support of information, namely the quantum bit or qubit, must at the same time be strongly coupled to other qubits by gates to compute information, and well decoupled from its environment to keep its quantum behavior. An interesting physical system for realizing such qubits are magnetic impurities in semiconductors, such as bismuth donors in silicon. Indeed, spins associated to bismuth donors can reach an extremely long coherence time - of the order of seconds. Yet it is extremely difficult to establish and control efficient gates between these spins. Here we demonstrate a protocol where single bismuth donors can coherently transfer their quantum information to a superconducting flux qubit, which acts as a mediator or quantum bus. This superconducting device allows to connect distant spins on-demand with little impact on their coherent behavior.
- 7 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Open AccessStrong coupling of a superconducting flux qubit to single bismuth donors
The realization of a quantum computer represents a tremendous scientific and technological challenge due to the extreme fragility of quantum information. The physical support of information, namely the quantum bit or qubit, must at the same time be strongly coupled to other qubits by gates to compute information, and well decoupled from its environment to keep its quantum behavior. An interesting physical system for realizing such qubits are magnetic impurities in semiconductors, such as bismuth donors in silicon. Indeed, spins associated to bismuth donors can reach an extremely long coherence time - of the order of seconds. Yet it is extremely difficult to establish and control efficient gates between these spins. Here we demonstrate a protocol where single bismuth donors can coherently transfer their quantum information to a superconducting flux qubit, which acts as a mediator or quantum bus. This superconducting device allows to connect distant spins on-demand with little impact on their coherent behavior.
- 8 July 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (7)
Silicon spin vacuum: Isotopically enriched and from ultrahigh fluence ion implantation- 8 July 2025
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 9 (7)
Silicon spin vacuum: Isotopically enriched and from ultrahigh fluence ion implantation- Open Access
- 18 April 2025
- Published by Springer Nature in npj Quantum Information
- Vol. 11 (1) , 1-10
Long optical and electron spin coherence times for erbium ions in silicon
- 18 April 2025
- Published by Springer Nature in npj Quantum Information
- Vol. 11 (1) , 1-10
Open AccessLong optical and electron spin coherence times for erbium ions in silicon
- Open Access
- 12 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Comparison of GeSn alloy films prepared by ion implantation and remote plasma-enhanced chemical vapor deposition methods
Thin films of germanium-tin (GeSn) alloy with Sn content well above its equilibrium solubility limit in Ge are produced using both remote plasma-enhanced chemical vapor deposition (RPECVD) directly on silicon substrates and ion implantation of Sn into Ge. For RPECVD, the growth temperature of 302 °C resulted in fully relaxed GeSn alloys with high defect density, principally threading dislocations related to the large lattice mismatch between Si and GeSn. For the implantation case, pulsed laser melting was used to melt and crystallize the GeSn layer on a time scale of a few tens of nanoseconds. The resulting GeSn layers were also relaxed and defective, presumably again as a result of lattice mismatch with the underlying Ge lattice. However, the nature of the defects was quite different to the RPECVD method, whereby the line defects were not threading dislocations but stackinglike defects, which developed into arrays of these defects in the high Sn content region close to the surface. For the purpose of comparing RPECVD and ion-implantation methods, alloy films of similar thickness (400–450 nm) and Sn content (4.5–6.5 at. %) were examined. Film parameters (thickness, Sn content, Sn solubility, and segregation), as well as film quality and defect structures, were examined for both fabrication methods using several analytical techniques. This comparison provided us with a better physical understanding of our GeSn films and will help inform future growth/fabrication strategies targeted at minimizing defects formed in the GeSn films for the realization of optoelectronic devices.
- 12 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Open AccessComparison of GeSn alloy films prepared by ion implantation and remote plasma-enhanced chemical vapor deposition methods
Thin films of germanium-tin (GeSn) alloy with Sn content well above its equilibrium solubility limit in Ge are produced using both remote plasma-enhanced chemical vapor deposition (RPECVD) directly on silicon substrates and ion implantation of Sn into Ge. For RPECVD, the growth temperature of 302 °C resulted in fully relaxed GeSn alloys with high defect density, principally threading dislocations related to the large lattice mismatch between Si and GeSn. For the implantation case, pulsed laser melting was used to melt and crystallize the GeSn layer on a time scale of a few tens of nanoseconds. The resulting GeSn layers were also relaxed and defective, presumably again as a result of lattice mismatch with the underlying Ge lattice. However, the nature of the defects was quite different to the RPECVD method, whereby the line defects were not threading dislocations but stackinglike defects, which developed into arrays of these defects in the high Sn content region close to the surface. For the purpose of comparing RPECVD and ion-implantation methods, alloy films of similar thickness (400–450 nm) and Sn content (4.5–6.5 at. %) were examined. Film parameters (thickness, Sn content, Sn solubility, and segregation), as well as film quality and defect structures, were examined for both fabrication methods using several analytical techniques. This comparison provided us with a better physical understanding of our GeSn films and will help inform future growth/fabrication strategies targeted at minimizing defects formed in the GeSn films for the realization of optoelectronic devices.
- Open Access
- 4 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (9)
Room temperature electrical characteristics of gold-hyperdoped silicon
Hyperdoped silicon is a promising material for near-infrared light detection, but to date, the device efficiency has been limited. To optimize photodetectors based on this material that operate at room temperature, we present a detailed study on the electrical nature of gold-hyperdoped silicon formed via ion implantation and pulsed-laser melting (PLM). After PLM processing, oxygen-rich and gold-rich surface layers were identified and a wet etch process was developed to remove them. Resistivity and Hall effect measurements were performed at various stages of device processing. The underlying gold-hyperdoped silicon was found to be semi-insulating, regardless of whether the surface gold was removed by etching or not. We propose a Fermi level pinning model to describe the band bending of the transformed surface layer and propose a promising device architecture for efficient Au-hyperdoped Si photodetectors.
- 4 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (9)
Open AccessRoom temperature electrical characteristics of gold-hyperdoped silicon
Hyperdoped silicon is a promising material for near-infrared light detection, but to date, the device efficiency has been limited. To optimize photodetectors based on this material that operate at room temperature, we present a detailed study on the electrical nature of gold-hyperdoped silicon formed via ion implantation and pulsed-laser melting (PLM). After PLM processing, oxygen-rich and gold-rich surface layers were identified and a wet etch process was developed to remove them. Resistivity and Hall effect measurements were performed at various stages of device processing. The underlying gold-hyperdoped silicon was found to be semi-insulating, regardless of whether the surface gold was removed by etching or not. We propose a Fermi level pinning model to describe the band bending of the transformed surface layer and propose a promising device architecture for efficient Au-hyperdoped Si photodetectors.
- Open Access
- 8 September 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (51)
Graphene‐Enhanced Single Ion Detectors for Deterministic Near‐Surface Dopant Implantation in Diamond
Diamond color centers with applications to single photon sources, quantum computation, and magnetic field sensing down to the nanoscale have been investigated using ensembles of near‐surface implanted atoms. Deterministic ion implantation for ions stopping between 30 and 130 nm deep is demonstrated by configuring an electronic‐grade diamond substrate with a biased surface graphene electrode connected to charge sensitive electronics. The thin graphene electrode has a negligible surface dead layer, so implantation events are signaled from the drift of electron–hole pairs induced by the dissipation of ion kinetic energy in the substrate. Ion beam induced charge maps from a scanned 1 MeV He microbeam show the graphene electrode is highly effective with a charge collection efficiency up to 86% compared to an O‐terminated diamond surface of 30%. For lower energy ions, applicable to near surface implantation, single ion detection confidence is >99(1)% for 19.5 keV H and 85(2)% for 24 keV N ions to allow maps of device surface features by employing a focused ion beam microscope or an atomic force microscope cantilever incorporating a nanostencil beam collimator. In the near‐term, this system can be used to investigate the annealing dynamics for the conversion of single implanted ions into diamond color centers.
- 8 September 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (51)
Open AccessGraphene‐Enhanced Single Ion Detectors for Deterministic Near‐Surface Dopant Implantation in Diamond
Diamond color centers with applications to single photon sources, quantum computation, and magnetic field sensing down to the nanoscale have been investigated using ensembles of near‐surface implanted atoms. Deterministic ion implantation for ions stopping between 30 and 130 nm deep is demonstrated by configuring an electronic‐grade diamond substrate with a biased surface graphene electrode connected to charge sensitive electronics. The thin graphene electrode has a negligible surface dead layer, so implantation events are signaled from the drift of electron–hole pairs induced by the dissipation of ion kinetic energy in the substrate. Ion beam induced charge maps from a scanned 1 MeV He microbeam show the graphene electrode is highly effective with a charge collection efficiency up to 86% compared to an O‐terminated diamond surface of 30%. For lower energy ions, applicable to near surface implantation, single ion detection confidence is >99(1)% for 19.5 keV H and 85(2)% for 24 keV N ions to allow maps of device surface features by employing a focused ion beam microscope or an atomic force microscope cantilever incorporating a nanostencil beam collimator. In the near‐term, this system can be used to investigate the annealing dynamics for the conversion of single implanted ions into diamond color centers.