Bernoulli Andilab
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernoulli Andilab has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Comondore Ravindran
Centre for Near-net-shape Processing of Materials, Ryerson University, Toronto, Canada
4 shared publications Payam Emadi
Toronto Metropolitan University
4 shared publicationsComondore Ravindran
Toronto Metropolitan University
3 shared publications- Payam Emadi
Centre for Near-net-shape Processing of Materials, Ryerson University, Toronto, Canada
3 shared publications C. Ravindran
2 shared publicationsEli Vandersluis
Toronto Metropolitan University
2 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by SAGE Publications in International Materials Reviews
Metallurgical factors affecting the thermal and electrical conductivity of Al and Mg alloys
Controlling the metallurgical factors affecting thermal conductivity is critical for improving thermal conductivity and promoting the wider use of structural materials in automotive, aerospace, and electronics applications. Although numerous studies examine isolated process parameters affecting thermal conductivity, there is a lack of comprehensive review of the effect of process parameters on thermal conductivity. This review critically summarizes the work available in the literature on metallurgical factors influencing thermal conductivity of aluminum and magnesium alloys, evaluating the effects of alloying elements, solidification, heat treatment, porosity, reinforcement addition, and plastic deformation. The review begins by presenting heat transfer mechanisms in metals, focusing on thermal carrier mobility in metals. While pure aluminum and magnesium exhibit relatively high conductivities, lattice irregularities including vacancies, dislocations, grain boundaries, secondary phases, and porosity all contribute to scattering of thermal carriers, thereby reducing conductivity. Studies on alloying have indicated that achieving high conductivity primarily requires minimizing solid solution concentration. Secondary phases in the microstructure also influence conductivity, making manipulation of their volume fraction and morphology refinement advantageous for conductivity. Thereafter, the various methods used to improve conductivity will be discussed, including novel addition of reinforcement particles such as graphene. Thermal conductivity manipulation in light alloys can be achieved via strategic control of composition, altering cooling rates, introducing chemical modifiers, and conducting high-temperature treatments. Finally, the discussion will include inadequacies in the literature as well as the opportunities for future work. To conclude, this review will demonstrate that although similar process techniques can be used to modify both mechanical properties and thermal conductivity, changes in microstructure can produce significantly different and often contrasting effects between these two properties. Therefore, with the comprehensive understanding enabled by this critical review, metallurgical control for enhancing thermal properties can be used in conjunction with that used for mechanical properties, to produce quality aluminum and magnesium components for engineering applications.
- 16 September 2026
- Published by SAGE Publications in International Materials Reviews
Open AccessMetallurgical factors affecting the thermal and electrical conductivity of Al and Mg alloys
Controlling the metallurgical factors affecting thermal conductivity is critical for improving thermal conductivity and promoting the wider use of structural materials in automotive, aerospace, and electronics applications. Although numerous studies examine isolated process parameters affecting thermal conductivity, there is a lack of comprehensive review of the effect of process parameters on thermal conductivity. This review critically summarizes the work available in the literature on metallurgical factors influencing thermal conductivity of aluminum and magnesium alloys, evaluating the effects of alloying elements, solidification, heat treatment, porosity, reinforcement addition, and plastic deformation. The review begins by presenting heat transfer mechanisms in metals, focusing on thermal carrier mobility in metals. While pure aluminum and magnesium exhibit relatively high conductivities, lattice irregularities including vacancies, dislocations, grain boundaries, secondary phases, and porosity all contribute to scattering of thermal carriers, thereby reducing conductivity. Studies on alloying have indicated that achieving high conductivity primarily requires minimizing solid solution concentration. Secondary phases in the microstructure also influence conductivity, making manipulation of their volume fraction and morphology refinement advantageous for conductivity. Thereafter, the various methods used to improve conductivity will be discussed, including novel addition of reinforcement particles such as graphene. Thermal conductivity manipulation in light alloys can be achieved via strategic control of composition, altering cooling rates, introducing chemical modifiers, and conducting high-temperature treatments. Finally, the discussion will include inadequacies in the literature as well as the opportunities for future work. To conclude, this review will demonstrate that although similar process techniques can be used to modify both mechanical properties and thermal conductivity, changes in microstructure can produce significantly different and often contrasting effects between these two properties. Therefore, with the comprehensive understanding enabled by this critical review, metallurgical control for enhancing thermal properties can be used in conjunction with that used for mechanical properties, to produce quality aluminum and magnesium components for engineering applications.
- Open Access
- 2 April 2026
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 15 (2) , 269
Special Issue on Characterization and Analysis of Aluminum and Magnesium Alloys in Engineering Applications
- 2 April 2026
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 15 (2) , 269
Open AccessSpecial Issue on Characterization and Analysis of Aluminum and Magnesium Alloys in Engineering Applications
- Open Access
- 3 September 2025
- Published by SAGE Publications in International Materials Reviews
- Vol. 71 (1) , 3-29
Ultrasonic processing of lightweight alloys: A critical review
Ultrasonic processing in the liquid state has been identified as an effective method to improve the mechanical properties of Al and Mg alloys. Ultrasonic melt processing is capable of enhancing material properties through the application of high-frequency, high-power vibrations that form cavitation bubbles which pulsate and collapse throughout the melt volume. Thus, this technology has excellent potential in engineering high performance lightweight materials. With global trends converging toward greener energy, reduced greenhouse gas (GHG) emissions and increasingly stringent efficiency standards, lightweight and high-strength alloys such as aluminum (Al) and magnesium (Mg) are becoming an area of high interest. The aim of this review is to analyze the literature on ultrasonic processing of Al and Mg alloys in the last 15 years. This review discusses ultrasonic processing equipment, experimental set-ups, mechanisms of ultrasonic cavitation and acoustic streaming. As well, the effects of processing time, vibrational amplitude, and temperature on microstructure and properties are elucidated. Furthermore, it aims to investigate how a combination of sonication and particle reinforcement can affect the properties of Al and Mg alloys. The challenges of ultrasonic processing have been identified and expanded on in this review. This includes energy consumption, equipment complexity, temperature control, process optimization and limited industrial adoption.
- 3 September 2025
- Published by SAGE Publications in International Materials Reviews
- Vol. 71 (1) , 3-29
Open AccessUltrasonic processing of lightweight alloys: A critical review
Ultrasonic processing in the liquid state has been identified as an effective method to improve the mechanical properties of Al and Mg alloys. Ultrasonic melt processing is capable of enhancing material properties through the application of high-frequency, high-power vibrations that form cavitation bubbles which pulsate and collapse throughout the melt volume. Thus, this technology has excellent potential in engineering high performance lightweight materials. With global trends converging toward greener energy, reduced greenhouse gas (GHG) emissions and increasingly stringent efficiency standards, lightweight and high-strength alloys such as aluminum (Al) and magnesium (Mg) are becoming an area of high interest. The aim of this review is to analyze the literature on ultrasonic processing of Al and Mg alloys in the last 15 years. This review discusses ultrasonic processing equipment, experimental set-ups, mechanisms of ultrasonic cavitation and acoustic streaming. As well, the effects of processing time, vibrational amplitude, and temperature on microstructure and properties are elucidated. Furthermore, it aims to investigate how a combination of sonication and particle reinforcement can affect the properties of Al and Mg alloys. The challenges of ultrasonic processing have been identified and expanded on in this review. This includes energy consumption, equipment complexity, temperature control, process optimization and limited industrial adoption.
- 21 December 2023
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 18 (4) , 3047-3061
Influence of GNP Additions on the Microstructure, Mechanical Properties, and Electrical Conductivity of Cast A319 Aluminum Alloy
- 21 December 2023
- Published by Springer Nature in International Journal of Metalcasting
- Vol. 18 (4) , 3047-3061
Influence of GNP Additions on the Microstructure, Mechanical Properties, and Electrical Conductivity of Cast A319 Aluminum Alloy
- Open Access
- 1 December 2022
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 10 (12) , 3397-3405
Effects of sonication amplitude on the microstructure and mechanical properties of AZ91E magnesium alloy
- 1 December 2022
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 10 (12) , 3397-3405
Open AccessEffects of sonication amplitude on the microstructure and mechanical properties of AZ91E magnesium alloy
- Open Access
Casting and Characterization of A319 Aluminum Alloy Reinforced with Graphene Using Hybrid Semi-Solid Stirring and Ultrasonic Processing
Advanced metallurgical processing techniques are required to produce aluminum matrix composites due to the tendency of the reinforcement particles to agglomerate. In this study, graphene nano-platelet reinforcement particles were effectively incorporated into an automotive A319 aluminum alloy matrix using a liquid metallurgical route. Due to its low density, it is a highly difficult task to produce an aluminum matrix composite reinforced with graphene. Hence, this study explored a novel approach to prevent particle floating to the melt surface and agglomeration. This was achieved via a hybrid semi-solid stirring of A319, followed by ultrasonic treatment of the liquid melt using a sonication probe. The microstructure and graphene particles were characterized using optical microscopy and scanning electron microscopy. Furthermore, the interfacial products produced with the incorporation of graphene in liquid aluminum were analyzed with X-ray diffraction. The tensile test results exhibited 10, 11 and 32% improvements in ultimate tensile strength, yield strength, and ductility of A319 reinforced with 0.05 wt.% addition of graphene. Analysis of strengthening models demonstrated primary contribution from Hall-Petch followed by CTE mismatch and load bearing mechanism. The results from this research enable the potential for using cost-effective, efficient and simple liquid metallurgy methods to produce aluminum reinforced graphene composites with improved mechanical properties.
Open AccessCasting and Characterization of A319 Aluminum Alloy Reinforced with Graphene Using Hybrid Semi-Solid Stirring and Ultrasonic Processing
Advanced metallurgical processing techniques are required to produce aluminum matrix composites due to the tendency of the reinforcement particles to agglomerate. In this study, graphene nano-platelet reinforcement particles were effectively incorporated into an automotive A319 aluminum alloy matrix using a liquid metallurgical route. Due to its low density, it is a highly difficult task to produce an aluminum matrix composite reinforced with graphene. Hence, this study explored a novel approach to prevent particle floating to the melt surface and agglomeration. This was achieved via a hybrid semi-solid stirring of A319, followed by ultrasonic treatment of the liquid melt using a sonication probe. The microstructure and graphene particles were characterized using optical microscopy and scanning electron microscopy. Furthermore, the interfacial products produced with the incorporation of graphene in liquid aluminum were analyzed with X-ray diffraction. The tensile test results exhibited 10, 11 and 32% improvements in ultimate tensile strength, yield strength, and ductility of A319 reinforced with 0.05 wt.% addition of graphene. Analysis of strengthening models demonstrated primary contribution from Hall-Petch followed by CTE mismatch and load bearing mechanism. The results from this research enable the potential for using cost-effective, efficient and simple liquid metallurgy methods to produce aluminum reinforced graphene composites with improved mechanical properties.
- 9 February 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 31 (7) , 5679-5688
Characterization of a Cast Al-Cu Alloy for Automotive Cylinder Head Applications
- 9 February 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 31 (7) , 5679-5688
Characterization of a Cast Al-Cu Alloy for Automotive Cylinder Head Applications
- 12 February 2020
- Published by Springer Nature
- p. 3-12
In Situ Analysis of Incipient Melting in a Novel High Strength Al–Cu Cast Alloy Using Laser Scanning Confocal Microscopy (LSCM)
- 12 February 2020
- Published by Springer Nature
- p. 3-12
In Situ Analysis of Incipient Melting in a Novel High Strength Al–Cu Cast Alloy Using Laser Scanning Confocal Microscopy (LSCM)
- 10 February 2020
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 51 (4) , 1874-1886
The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy
- 10 February 2020
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 51 (4) , 1874-1886
The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy
- 22 January 2020
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 9 (1) , 61-74
Interactions Between Strontium and Sodium Fluorosilicate in the Combined Treatment of A319 Al Alloy
- 22 January 2020
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 9 (1) , 61-74
Interactions Between Strontium and Sodium Fluorosilicate in the Combined Treatment of A319 Al Alloy