Alicia Rodríguez-Pulido
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alicia Rodríguez-Pulido has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Martha Poisot
Instituto de Química Aplicada, Universidad del Papaloapan, Circuito Central 200, Parque Industrial, Tuxtepec, Oax C.P. 68301, Mexico
2 shared publications - María Azucena González-Lozano
Facultad de Ciencias Químicas, Universidad Juárez del Estado de Durango, Av. Veterinaria s/n, Circuito Universitario, Durango C.P. 34120, Mexico
2 shared publications - Patricia Ponce-Peña
Facultad de Ciencias Químicas, Universidad Juárez del Estado de Durango (UJED), Durango, Mexico
2 shared publications - Diola Marina Núñez-Ramírez
Facultad de Ciencias Químicas, Universidad Juárez del Estado de Durango, Av. Veterinaria s/n, Circuito Universitario, Durango C.P. 34120, Mexico
1 shared publication - Luis Alberto Bretado-Aragón
Ingeniería en Nanotecnologia, Universidad de la Ciénega del Estado de Michoacán de Ocampo (UCEMICH), Avenida Universidad 3000, Col. Lomas de la Universidad, Sahuayo 59103, Michoacán, Mexico
1 shared publication - Luis Medina-Torres
Universidad Nacional Autónoma de México
1 shared publication
Latest Publications
- Open Access
Characterization and Property Evaluation of Glasses Made from Mine Tailings, Glass Waste, and Fluxes
The present investigation introduces a novel approach, using As-Zn-Fe mining tailings (MT) and recycled bottle glass (cullet) to enable the manufacturing of a new glass for ornamental articles, with characteristics similar to those of soda–lime–silicate glass (SLS), and at the same time, immobilizing potentially toxic elements (PTEs) from mining tailings, which cause environmental pollution with severe risks to human health. The glass used was obtained from transparent glass bottles collected from urban waste, which were later washed to remove impurities and then crushed until they reached No. 70 mesh (212 μm) level; in the case of mining tailings, the sample used comes from the ore benefit process, with 96.8% of particles below the No. 50 mesh level (300 μm). Six mixtures were made by varying the composition of the mining tailings and glass, K2CO3 and H3BO3 as fluxes were also used in constant proportion. The mixtures were melted at 1370 °C, and later, the glass samples were cast on a steel plate at room temperature. The characteristics of the glasses were studied using thermal analysis (TA), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). Likewise, their chemical resistance in acid and basic media and density were evaluated. The results unequivocally demonstrate the feasibility of manufacturing glasses with a light green color, the increase in the content of mining tailings increased the apparent Tg from 625 to 831 °C. Glasses with 17 and 21.3% MT presented lower density values due to a better-polymerized glass structure, attributed to the increase in SiO2 and Al2O3 and the decrease in alkaline oxides, which allowed for the retention of PTEs in their structure.
Open AccessCharacterization and Property Evaluation of Glasses Made from Mine Tailings, Glass Waste, and Fluxes
The present investigation introduces a novel approach, using As-Zn-Fe mining tailings (MT) and recycled bottle glass (cullet) to enable the manufacturing of a new glass for ornamental articles, with characteristics similar to those of soda–lime–silicate glass (SLS), and at the same time, immobilizing potentially toxic elements (PTEs) from mining tailings, which cause environmental pollution with severe risks to human health. The glass used was obtained from transparent glass bottles collected from urban waste, which were later washed to remove impurities and then crushed until they reached No. 70 mesh (212 μm) level; in the case of mining tailings, the sample used comes from the ore benefit process, with 96.8% of particles below the No. 50 mesh level (300 μm). Six mixtures were made by varying the composition of the mining tailings and glass, K2CO3 and H3BO3 as fluxes were also used in constant proportion. The mixtures were melted at 1370 °C, and later, the glass samples were cast on a steel plate at room temperature. The characteristics of the glasses were studied using thermal analysis (TA), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). Likewise, their chemical resistance in acid and basic media and density were evaluated. The results unequivocally demonstrate the feasibility of manufacturing glasses with a light green color, the increase in the content of mining tailings increased the apparent Tg from 625 to 831 °C. Glasses with 17 and 21.3% MT presented lower density values due to a better-polymerized glass structure, attributed to the increase in SiO2 and Al2O3 and the decrease in alkaline oxides, which allowed for the retention of PTEs in their structure.
- Open Access
Crystalline Structure, Synthesis, Properties and Applications of Potassium Hexatitanate: A Review
Potassium hexatitanate (PHT) with chemical formula K2Ti6O13 has a tunnel structure formed by TiO2 octahedra sharing edges or corners and with the potassium atoms located in the tunnels. This material has attracted great interest in the areas of photocatalysis, reinforcement of materials, biomaterials, etc. This work summarizes a large number of studies about methods to prepare PHT since particle size can be modified from millimeter to nanometric scale according to the applied method. Likewise, the synthesis method has influenced the material properties as band-gap and the final mechanical performance of composites when the reinforcement is PHT. The knowing of synthesis, properties and applications of PHT is worthwhile for the design of new materials and for the development of new applications taking advantage of their inherent properties.
Open AccessCrystalline Structure, Synthesis, Properties and Applications of Potassium Hexatitanate: A Review
Potassium hexatitanate (PHT) with chemical formula K2Ti6O13 has a tunnel structure formed by TiO2 octahedra sharing edges or corners and with the potassium atoms located in the tunnels. This material has attracted great interest in the areas of photocatalysis, reinforcement of materials, biomaterials, etc. This work summarizes a large number of studies about methods to prepare PHT since particle size can be modified from millimeter to nanometric scale according to the applied method. Likewise, the synthesis method has influenced the material properties as band-gap and the final mechanical performance of composites when the reinforcement is PHT. The knowing of synthesis, properties and applications of PHT is worthwhile for the design of new materials and for the development of new applications taking advantage of their inherent properties.