Noriyuki Narukage
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Noriyuki Narukage has a total of 258 co-authors. Here are the top co-authors by number of shared publications:
- Amy R. Winebarger
NASA Marshall Space Flight Center
6 shared publications - Ken Kobayashi
NASA Marshall Space Flight Center, Huntsville, AL 35812, USA
6 shared publications - David E. McKenzie
NASA Marshall Space Flight Center, Huntsville, AL 35812, USA
5 shared publications - Masahito Kubo
National Astronomical Observatory of Japan
5 shared publications - Taro Sakao
Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, Sagamihara, Kanagawa 252-5210, Japan
5 shared publications - Amir Caspi
Southwest Research Institute
4 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1011 (2) , 202
Real-time Early Flare Alert System for the First Sounding Rocket Solar Flare Campaign
Understanding when and where a solar flare will occur continues to be an important goal for the heliophysics community, relevant to fundamental research, coordinated flare observations, and space weather applications. In 2024 April, the Focusing Optics X-ray Solar Imager (FOXSI-4) and High-resolution Coronal Imager (Hi-C Flare) carried out NASA’s first coordinated sounding rocket solar flare campaign at the Poker Flat Research Range (PFRR) in Fairbanks, Alaska, for the purpose of performing a triggered launch to observe a large (>C5 class) solar flare with flare-optimized instrumentation. For this campaign, we developed and successfully implemented a novel real-time early flare alert system that leverages low-latency solar imaging and irradiance measurements of the early stages of flares to establish when a large flare is imminent, predict the remaining duration, and identify the flare location in real time. By providing actionable flare nowcasts, this optimized collection of tools/visualizations informed real-time launch decisions and enabled the successful launch of the FOXSI-4 and Hi-C Flare experiments to observe a long-duration M-class flare. We detail the implementation of this early flare alert system, its operational validation during the launch, and the lessons learned to inform future flare monitoring systems and solar flare observing campaigns.
- 4 November 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1011 (2) , 202
Open AccessReal-time Early Flare Alert System for the First Sounding Rocket Solar Flare Campaign
Understanding when and where a solar flare will occur continues to be an important goal for the heliophysics community, relevant to fundamental research, coordinated flare observations, and space weather applications. In 2024 April, the Focusing Optics X-ray Solar Imager (FOXSI-4) and High-resolution Coronal Imager (Hi-C Flare) carried out NASA’s first coordinated sounding rocket solar flare campaign at the Poker Flat Research Range (PFRR) in Fairbanks, Alaska, for the purpose of performing a triggered launch to observe a large (>C5 class) solar flare with flare-optimized instrumentation. For this campaign, we developed and successfully implemented a novel real-time early flare alert system that leverages low-latency solar imaging and irradiance measurements of the early stages of flares to establish when a large flare is imminent, predict the remaining duration, and identify the flare location in real time. By providing actionable flare nowcasts, this optimized collection of tools/visualizations informed real-time launch decisions and enabled the successful launch of the FOXSI-4 and Hi-C Flare experiments to observe a long-duration M-class flare. We detail the implementation of this early flare alert system, its operational validation during the launch, and the lessons learned to inform future flare monitoring systems and solar flare observing campaigns.
- Open Access
- 27 July 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1006 (2) , 189
Numerical Investigation of Efficient Electron Acceleration at an Unsteady Solar Flare Loop Top
Using magnetohydrodynamic fields and guiding-center test-particle calculations, this study investigates how time-dependent loop-top dynamics modulate the adiabatic energization of electrons in a solar flare. Our results indicate that a time-varying loop-top structure enhances acceleration efficiency compared to a quasi-steady one. In the quasi-steady velocity field, the net acceleration is suppressed due to the decelerating effect of betatron cooling. Conversely, in the unsteady velocity field, the betatron mechanism readily accelerates electrons within the compressed magnetic field at the edge of the loop top. These findings suggest that the acceleration of electrons at the loop top is driven not only by the static shape of the magnetic structure but also by dynamic events such as plasmoid collisions. While previous studies have primarily focused on acceleration processes within the reconnection outflow, such as at termination shocks or within plasmoids, our research highlights the importance of the acceleration and deceleration processes at the exit point where electrons escape from the loop top.
- 27 July 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1006 (2) , 189
Open AccessNumerical Investigation of Efficient Electron Acceleration at an Unsteady Solar Flare Loop Top
Using magnetohydrodynamic fields and guiding-center test-particle calculations, this study investigates how time-dependent loop-top dynamics modulate the adiabatic energization of electrons in a solar flare. Our results indicate that a time-varying loop-top structure enhances acceleration efficiency compared to a quasi-steady one. In the quasi-steady velocity field, the net acceleration is suppressed due to the decelerating effect of betatron cooling. Conversely, in the unsteady velocity field, the betatron mechanism readily accelerates electrons within the compressed magnetic field at the edge of the loop top. These findings suggest that the acceleration of electrons at the loop top is driven not only by the static shape of the magnetic structure but also by dynamic events such as plasmoid collisions. While previous studies have primarily focused on acceleration processes within the reconnection outflow, such as at termination shocks or within plasmoids, our research highlights the importance of the acceleration and deceleration processes at the exit point where electrons escape from the loop top.
- Open Access
- 1 April 2026
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 138 (4) , 045003
Development of Electroformed X-Ray Optics Bridging Synchrotron Radiation Technology and Space Astronomy
We have developed X-ray telescope mirrors using our original electroforming replication technique, which was established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors used in synchrotron X-ray microscopy. In this paper, we present for the first time the detailed results of X-ray illumination tests performed both for a 60 mm diameter, full-circumference, double-reflection monolithic electroformed nickel mirror and for the Mirror Module Assembly (MMA) incorporating it. The experiments were performed at SPring-8 beamline BL29XUL, which has a 1 km beamline length. To simulate the parallel X-ray beam from celestial sources, we constructed and utilized a dedicated evaluation system, the High-Brilliance X-ray Kilometer-long Large-Area Expanded-beam Evaluation System (HBX-KLAEES). Thanks to the high photon flux and the virtually point-like source with a very small diverging angle provided by HBX-KLAEES, we were able to evaluate the imaging performance with high fidelity, resolving both the sharp core and the large-angle components of the Point Spread Function. The results demonstrated an extremely sharp core with a Full Width at Half Maximum of 0 . ″ 7 and a Half Power Diameter of 14″ even after integration into the MMA. Furthermore, a positive correlation was found between the angular resolution and the axial direction figure error of both the primary and secondary sections, indicating that the axial figure error contributes to image degradation. Based on these achievements, the MMA incorporating this mirror was selected as one of the hard X-ray optics for the FOXSI-4 sounding rocket experiment, which performs high-resolution soft and hard X-ray imaging spectroscopy of solar flares, and was successfully launched. These results pave the way for further improvements in angular resolution and for the development of high-resolution, ultra-short focal length X-ray optics applicable to small satellites including CubeSats.
- 1 April 2026
- Published by IOP Publishing in Publications of the Astronomical Society of the Pacific
- Vol. 138 (4) , 045003
Open AccessDevelopment of Electroformed X-Ray Optics Bridging Synchrotron Radiation Technology and Space Astronomy
We have developed X-ray telescope mirrors using our original electroforming replication technique, which was established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors used in synchrotron X-ray microscopy. In this paper, we present for the first time the detailed results of X-ray illumination tests performed both for a 60 mm diameter, full-circumference, double-reflection monolithic electroformed nickel mirror and for the Mirror Module Assembly (MMA) incorporating it. The experiments were performed at SPring-8 beamline BL29XUL, which has a 1 km beamline length. To simulate the parallel X-ray beam from celestial sources, we constructed and utilized a dedicated evaluation system, the High-Brilliance X-ray Kilometer-long Large-Area Expanded-beam Evaluation System (HBX-KLAEES). Thanks to the high photon flux and the virtually point-like source with a very small diverging angle provided by HBX-KLAEES, we were able to evaluate the imaging performance with high fidelity, resolving both the sharp core and the large-angle components of the Point Spread Function. The results demonstrated an extremely sharp core with a Full Width at Half Maximum of 0 . ″ 7 and a Half Power Diameter of 14″ even after integration into the MMA. Furthermore, a positive correlation was found between the angular resolution and the axial direction figure error of both the primary and secondary sections, indicating that the axial figure error contributes to image degradation. Based on these achievements, the MMA incorporating this mirror was selected as one of the hard X-ray optics for the FOXSI-4 sounding rocket experiment, which performs high-resolution soft and hard X-ray imaging spectroscopy of solar flares, and was successfully launched. These results pave the way for further improvements in angular resolution and for the development of high-resolution, ultra-short focal length X-ray optics applicable to small satellites including CubeSats.
- Open Access
Development of Electroformed X-ray Optics Bridging Synchrotron Technology and Space Astronomy
We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy. This paper presents detailed results of X-ray illumination tests of a 60-mm-diameter, full-circumference, double-reflection monolithic electroformed nickel mirror and its Mirror Module Assembly (MMA). The experiments were conducted at the 1-km beamline BL29XUL at SPring-8. To simulate a parallel X-ray beam from celestial sources, we constructed a dedicated evaluation system, the High-Brilliance X-ray Kilometer-long Large-Area Expanded-beam Evaluation System (HBX-KLAEES). Owing to the high photon flux and the quasi-point-like source with a small divergence provided by HBX-KLAEES, the imaging performance was evaluated with high fidelity, resolving both the sharp core and large-angle components of the Point Spread Function (PSF). The results show an extremely sharp core with a Full Width at Half Maximum (FWHM) of 0.7 arcsec and a Half Power Diameter (HPD) of 14 arcsec, even after integration into the MMA. In addition, a positive correlation was found between angular resolution and axial figure error in both the primary and secondary mirror sections, indicating that axial figure errors contribute to image degradation. Based on these results, the MMA was selected as one of the hard X-ray optics for the FOXSI-4 sounding rocket experiment, which performs high-resolution soft and hard X-ray imaging spectroscopy of solar flares and was successfully launched. These results demonstrate the potential for further improvements in angular resolution and the development of high-resolution, ultra-short focal length X-ray optics for small satellites, including CubeSats.
Open AccessDevelopment of Electroformed X-ray Optics Bridging Synchrotron Technology and Space Astronomy
We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy. This paper presents detailed results of X-ray illumination tests of a 60-mm-diameter, full-circumference, double-reflection monolithic electroformed nickel mirror and its Mirror Module Assembly (MMA). The experiments were conducted at the 1-km beamline BL29XUL at SPring-8. To simulate a parallel X-ray beam from celestial sources, we constructed a dedicated evaluation system, the High-Brilliance X-ray Kilometer-long Large-Area Expanded-beam Evaluation System (HBX-KLAEES). Owing to the high photon flux and the quasi-point-like source with a small divergence provided by HBX-KLAEES, the imaging performance was evaluated with high fidelity, resolving both the sharp core and large-angle components of the Point Spread Function (PSF). The results show an extremely sharp core with a Full Width at Half Maximum (FWHM) of 0.7 arcsec and a Half Power Diameter (HPD) of 14 arcsec, even after integration into the MMA. In addition, a positive correlation was found between angular resolution and axial figure error in both the primary and secondary mirror sections, indicating that axial figure errors contribute to image degradation. Based on these results, the MMA was selected as one of the hard X-ray optics for the FOXSI-4 sounding rocket experiment, which performs high-resolution soft and hard X-ray imaging spectroscopy of solar flares and was successfully launched. These results demonstrate the potential for further improvements in angular resolution and the development of high-resolution, ultra-short focal length X-ray optics for small satellites, including CubeSats.
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-24
SpaceWire-based data acquisition network for the solar flare sounding rocket experiment FOXSI-4 and FOXSI-5
We developed a SpaceWire-based data acquisition (DAQ) system for the FOXSI-4 and FOXSI-5 sounding rocket experiments, which aim to observe solar flares with high sensitivity and dynamic range using direct X-ray focusing optics. The FOXSI-4 mission, launched on April 17, 2024, achieved the first direct focusing observation of a GOES M1.6 class solar flare with imaging spectroscopy capabilities in the soft and hard X-ray energy ranges, using a suite of advanced detectors, including two CMOS sensors, four CdTe double-sided strip detectors (CdTe-DSDs), and a Quad-Timepix3 detector. To accommodate the high photon flux from a solar flare and these diverse detector types, a modular DAQ network architecture was implemented based on SpaceWire and the remote memory access protocol (RMAP). This modular architecture enabled fast, reliable, and scalable communication among various onboard components, including detectors, readout boards, onboard computers, and telemetry systems. In addition, by standardizing the communication interface and modularizing each detector unit and its associated electronics, the architecture also supported distributed development among collaborating institutions, simplifying integration and reducing overall complexity. To realize this architecture, we developed field-programmable gate array (FPGA)-based readout boards (SPMU-001 and SPMU-002) that support SpaceWire communication for high-speed data transfer and flexible instrument control. In addition, a real-time ground support system was developed to handle telemetry and command operations during flight, enabling live monitoring and adaptive configuration of onboard instruments in response to the properties of the observed solar flare. The same architecture is being adopted for the upcoming FOXSI-5 mission, scheduled for launch in 2026.
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-24
SpaceWire-based data acquisition network for the solar flare sounding rocket experiment FOXSI-4 and FOXSI-5
We developed a SpaceWire-based data acquisition (DAQ) system for the FOXSI-4 and FOXSI-5 sounding rocket experiments, which aim to observe solar flares with high sensitivity and dynamic range using direct X-ray focusing optics. The FOXSI-4 mission, launched on April 17, 2024, achieved the first direct focusing observation of a GOES M1.6 class solar flare with imaging spectroscopy capabilities in the soft and hard X-ray energy ranges, using a suite of advanced detectors, including two CMOS sensors, four CdTe double-sided strip detectors (CdTe-DSDs), and a Quad-Timepix3 detector. To accommodate the high photon flux from a solar flare and these diverse detector types, a modular DAQ network architecture was implemented based on SpaceWire and the remote memory access protocol (RMAP). This modular architecture enabled fast, reliable, and scalable communication among various onboard components, including detectors, readout boards, onboard computers, and telemetry systems. In addition, by standardizing the communication interface and modularizing each detector unit and its associated electronics, the architecture also supported distributed development among collaborating institutions, simplifying integration and reducing overall complexity. To realize this architecture, we developed field-programmable gate array (FPGA)-based readout boards (SPMU-001 and SPMU-002) that support SpaceWire communication for high-speed data transfer and flexible instrument control. In addition, a real-time ground support system was developed to handle telemetry and command operations during flight, enabling live monitoring and adaptive configuration of onboard instruments in response to the properties of the observed solar flare. The same architecture is being adopted for the upcoming FOXSI-5 mission, scheduled for launch in 2026.
- Open Access
- 31 July 2023
- Published by American Astronomical Society
- Vol. 55 (3)
Magnetic Energy Powers the Corona: How We Can Understand its 3D Storage & Release
Whitepaper #049 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: solar physics.
- 31 July 2023
- Published by American Astronomical Society
- Vol. 55 (3)
Open AccessMagnetic Energy Powers the Corona: How We Can Understand its 3D Storage & Release
Whitepaper #049 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: solar physics.
- Open Access
- 31 July 2023
- Published by American Astronomical Society
- Vol. 55 (3)
COMPLETE: a flagship mission for complete understanding of 3D coronal magnetic energy release
Whitepaper #048 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: solar physics; space-based missions/projects.
- 31 July 2023
- Published by American Astronomical Society
- Vol. 55 (3)
Open AccessCOMPLETE: a flagship mission for complete understanding of 3D coronal magnetic energy release
Whitepaper #048 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: solar physics; space-based missions/projects.
- Open Access
- 31 July 2023
- Published by American Astronomical Society
Particle acceleration in solar flares with imaging-spectroscopy in soft X-rays
Whitepaper #302 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: fundamental space plasma theory; solar physics.
- 31 July 2023
- Published by American Astronomical Society
Open AccessParticle acceleration in solar flares with imaging-spectroscopy in soft X-rays
Whitepaper #302 in the Decadal Survey for Solar and Space Physics (Heliophysics) 2024-2033. Main topics: basic research. Additional topics: fundamental space plasma theory; solar physics.
- 14 October 2022
- Published by Springer Nature in Solar Physics
- Vol. 297 (10) , 1-32
Polarization Accuracy Verification of the Chromospheric LAyer SpectroPolarimeter
- 14 October 2022
- Published by Springer Nature in Solar Physics
- Vol. 297 (10) , 1-32
Polarization Accuracy Verification of the Chromospheric LAyer SpectroPolarimeter
- Open Access
- 31 August 2022
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 936 (1) , 67
Quiet Sun Center to Limb Variation of the Linear Polarization Observed by CLASP2 Across the Mg ii h and k Lines
The CLASP2 (Chromospheric LAyer Spectro-Polarimeter 2) sounding rocket mission was launched on 2019 April 11. CLASP2 measured the four Stokes parameters of the Mg ii h and k spectral region around 2800 Å along a 200″ slit at three locations on the solar disk, achieving the first spatially and spectrally resolved observations of the solar polarization in this near-ultraviolet region. The focus of the work presented here is the center-to-limb variation of the linear polarization across these resonance lines, which is produced by the scattering of anisotropic radiation in the solar atmosphere. The linear polarization signals of the Mg ii h and k lines are sensitive to the magnetic field from the low to the upper chromosphere through the Hanle and magneto-optical effects. We compare the observations to theoretical predictions from radiative transfer calculations in unmagnetized semiempirical models, arguing that magnetic fields and horizontal inhomogeneities are needed to explain the observed polarization signals and spatial variations. This comparison is an important step in both validating and refining our understanding of the physical origin of these polarization signatures, and also in paving the way toward future space telescopes for probing the magnetic fields of the solar upper atmosphere via ultraviolet spectropolarimetry.
- 31 August 2022
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 936 (1) , 67
Open AccessQuiet Sun Center to Limb Variation of the Linear Polarization Observed by CLASP2 Across the Mg ii h and k Lines
The CLASP2 (Chromospheric LAyer Spectro-Polarimeter 2) sounding rocket mission was launched on 2019 April 11. CLASP2 measured the four Stokes parameters of the Mg ii h and k spectral region around 2800 Å along a 200″ slit at three locations on the solar disk, achieving the first spatially and spectrally resolved observations of the solar polarization in this near-ultraviolet region. The focus of the work presented here is the center-to-limb variation of the linear polarization across these resonance lines, which is produced by the scattering of anisotropic radiation in the solar atmosphere. The linear polarization signals of the Mg ii h and k lines are sensitive to the magnetic field from the low to the upper chromosphere through the Hanle and magneto-optical effects. We compare the observations to theoretical predictions from radiative transfer calculations in unmagnetized semiempirical models, arguing that magnetic fields and horizontal inhomogeneities are needed to explain the observed polarization signals and spatial variations. This comparison is an important step in both validating and refining our understanding of the physical origin of these polarization signatures, and also in paving the way toward future space telescopes for probing the magnetic fields of the solar upper atmosphere via ultraviolet spectropolarimetry.