Christophe Pécheyran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Christophe Pécheyran has a total of 444 co-authors. Here are the top co-authors by number of shared publications:
- Sylvain Bérail
IPREM, Centre National de la Recherche Scientifique, Pau, France
20 shared publications Olivier F. X. Donard
Université de Pau et des Pays de l'Adour
16 shared publications- David Amouroux
Universite de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, Institut des Sciences Analytiques et de Physico-chimie pour l'Environnement et les matériaux, Pau, 64000, France
14 shared publications - Françoise Daverat
UMR ECOBIOP, 1224, Institut National de Recherche pour l'Agriculture, l'alimentation et l'Environnement—INRAE, UPPA Saint‐Pée‐sur‐Nivelle France
14 shared publications Fanny Claverie
Institut des Sciences Analytiques et de Physicochimie pour l’Environnement et les Materiaux, Centre national de la recherche scientifique, University of Pau and Pays de l’Adour (UPPA), UMR 5254, 64000 Pau, France
12 shared publications- Fanny Claverie
Universite de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, UMR5254, Pau, France
8 shared publications
Latest Publications
- 12 July 2026
- Published by Wiley in Journal of Fish Biology
Population‐specific bycatch risks in two vulnerable anadromous clupeids: Insights from otolith microchemistry
Otolith microchemistry analysis revealed that bycatch of European shads, allis shad Alosa alosa and twaite shad Alosa fallax , in western Iberian commercial fisheries removes individuals from a wide array of natal origins, with the most abundant source rivers suffering the heaviest losses. Spatial variation in bycatch risk was evident: Specific marine areas exhibited high natal origin diversity, reflecting complex dispersal. Alosa alosa showed extensive medium‐ and long‐distance movements, including rare longitudinal displacements along the Cantabrian slope, and greater natal origin diversity than A. fallax , whose dispersal was largely restricted to middle‐distance, latitudinal migrations. In both species, bycatches were dominated by the most abundant continental populations, Mondego and Minho for A. alosa , and Ulla and Minho for A. fallax , suggesting that these rivers function as source populations exporting individuals to sink populations through marine dispersal. Despite their differing dispersal ranges, both species displayed dual resident–dispersive contingents coexisting within the same populations, reflecting an interplay of river proximity, philopatry and resource availability. The stronger philopatry and constrained range of A. fallax imply heightened vulnerability to localized bycatch pressure near natal rivers, whereas A. alosa 's broader dispersal and higher origin diversity expose multiple populations to risk at a regional scale. These species‐specific dispersal capacities and metapopulation structures critically shape bycatch vulnerability. Incorporating natal origin and dispersal data into transnational, ecosystem‐based management, such as targeted temporal or spatial fishing restrictions at mixing hotspots, will be essential to safeguard metapopulation dynamics, mitigate bycatch mortality and maintain ecological connectivity among European shad populations.
- 12 July 2026
- Published by Wiley in Journal of Fish Biology
Population‐specific bycatch risks in two vulnerable anadromous clupeids: Insights from otolith microchemistry
Otolith microchemistry analysis revealed that bycatch of European shads, allis shad Alosa alosa and twaite shad Alosa fallax , in western Iberian commercial fisheries removes individuals from a wide array of natal origins, with the most abundant source rivers suffering the heaviest losses. Spatial variation in bycatch risk was evident: Specific marine areas exhibited high natal origin diversity, reflecting complex dispersal. Alosa alosa showed extensive medium‐ and long‐distance movements, including rare longitudinal displacements along the Cantabrian slope, and greater natal origin diversity than A. fallax , whose dispersal was largely restricted to middle‐distance, latitudinal migrations. In both species, bycatches were dominated by the most abundant continental populations, Mondego and Minho for A. alosa , and Ulla and Minho for A. fallax , suggesting that these rivers function as source populations exporting individuals to sink populations through marine dispersal. Despite their differing dispersal ranges, both species displayed dual resident–dispersive contingents coexisting within the same populations, reflecting an interplay of river proximity, philopatry and resource availability. The stronger philopatry and constrained range of A. fallax imply heightened vulnerability to localized bycatch pressure near natal rivers, whereas A. alosa 's broader dispersal and higher origin diversity expose multiple populations to risk at a regional scale. These species‐specific dispersal capacities and metapopulation structures critically shape bycatch vulnerability. Incorporating natal origin and dispersal data into transnational, ecosystem‐based management, such as targeted temporal or spatial fishing restrictions at mixing hotspots, will be essential to safeguard metapopulation dynamics, mitigate bycatch mortality and maintain ecological connectivity among European shad populations.
- Open Access
- 4 December 2025
- Published by MDPI AG in Geosciences
- Vol. 15 (12) , 463
Timing of Deformation in the Provence Fold-and-Thrust Belt (SE France) as Constrained by U-Pb Calcite Geochronology
A combination of fault and fracture analyses, paleostress reconstructions from calcite twins, and U-Pb dating of syn-kinematic calcite mineralization provides new insights into the Cretaceous–Tertiary tectonic evolution of the Provence fold-and-thrust belt. This approach helped unravel 90 million years of polyphase deformation in this belt, which represents the eastward continuation of the northern Pyrenees. Focusing on three main targets along an NNE-SSW transect oriented roughly parallel to the regional Pyrenean shortening (the southernmost Nerthe range, the Bimont Lake area, and the northern Rians syncline), we date a wide range of scales and natures of deformation structures such as stylolites, veins, mesoscale faults, and major thrust fault zones. The reconstructed long-lasting tectonic history includes (1) the Durancian uplift and related NNE-SSW extension (~110 to 90 Ma); (2) the ~N-S Pyrenean compression related to the convergence then collision between Eurasia and Iberia and the Corsica–Sardinia block (~80 to 34 Ma); the Oligocene E-W to WNW-ESE extension related to the West European Cenozoic Rift System (ECRIS) and the Oligo–Miocene NW-SE to NNW-SSE extension related to the Liguro-Provençal Rifting (LPR); and a middle-late (?) N-S to NW-SE Alpine compression. We show that the Pyrenean shortening in Provence occurred during two main phases, 81–69 Ma and 59–34 Ma, coeval with the inversion of the pre-Pyrenean rift and the main Pyrenean collision, separated by a tectonic quiescence as described in the Pyrenees. Together with the published literature, our U-Pb ages also support the overall northward (forelandward) in sequence propagation of Pyrenean shortening across Provence. Our U-Pb results further allow us to refine the interpretation of local and regional fracture sets and reveal unsuspected polyphase development of fractures sharing a common strike. Beyond regional implications, our study shows that sampling structures of various natures and scales for U-Pb geochronology is probably the most efficient strategy to encompass the entire time interval of deformation in fold-and-thrust belts.
- 4 December 2025
- Published by MDPI AG in Geosciences
- Vol. 15 (12) , 463
Open AccessTiming of Deformation in the Provence Fold-and-Thrust Belt (SE France) as Constrained by U-Pb Calcite Geochronology
A combination of fault and fracture analyses, paleostress reconstructions from calcite twins, and U-Pb dating of syn-kinematic calcite mineralization provides new insights into the Cretaceous–Tertiary tectonic evolution of the Provence fold-and-thrust belt. This approach helped unravel 90 million years of polyphase deformation in this belt, which represents the eastward continuation of the northern Pyrenees. Focusing on three main targets along an NNE-SSW transect oriented roughly parallel to the regional Pyrenean shortening (the southernmost Nerthe range, the Bimont Lake area, and the northern Rians syncline), we date a wide range of scales and natures of deformation structures such as stylolites, veins, mesoscale faults, and major thrust fault zones. The reconstructed long-lasting tectonic history includes (1) the Durancian uplift and related NNE-SSW extension (~110 to 90 Ma); (2) the ~N-S Pyrenean compression related to the convergence then collision between Eurasia and Iberia and the Corsica–Sardinia block (~80 to 34 Ma); the Oligocene E-W to WNW-ESE extension related to the West European Cenozoic Rift System (ECRIS) and the Oligo–Miocene NW-SE to NNW-SSE extension related to the Liguro-Provençal Rifting (LPR); and a middle-late (?) N-S to NW-SE Alpine compression. We show that the Pyrenean shortening in Provence occurred during two main phases, 81–69 Ma and 59–34 Ma, coeval with the inversion of the pre-Pyrenean rift and the main Pyrenean collision, separated by a tectonic quiescence as described in the Pyrenees. Together with the published literature, our U-Pb ages also support the overall northward (forelandward) in sequence propagation of Pyrenean shortening across Provence. Our U-Pb results further allow us to refine the interpretation of local and regional fracture sets and reveal unsuspected polyphase development of fractures sharing a common strike. Beyond regional implications, our study shows that sampling structures of various natures and scales for U-Pb geochronology is probably the most efficient strategy to encompass the entire time interval of deformation in fold-and-thrust belts.
- Open Access
- 13 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Immunomagnetic and Immunogold Sandwich Assay for Borrelia burgdorferi detection from blood samples by fsLA-ICP-MS as a proof-of-concept diagnosis of the Lyme Disease
This article describes a proof-of-concept study of Borrelia burgdorferi qualitative detection from artificial blood samples by fsLA-ICP-MS, following an immunomagnetic separation and immunogold staining, showing great potential for diagnosis of the Lyme Disease (LD). A powerful magnetic separation method was established for B. burgdorferi preconcentration from 10 mL samples and blood matrix elimination, with the use of 300 nm diameter size magnetic nanoparticles (MNPs) conjugated to anti-B. burgdorferi. Qualitative 197Au fsLA-ICP-MS B. burgdorferi detection was demonstrated after bacteria immunogold staining with 3 nm gold nanoclusters (AuNCs) conjugated to another type of anti-B. burgdorferi. The complete sandwich immunoassay was performed in 10-times diluted artificial blood samples spiked with 2·106 bacterial cfu and the specificity was tested against E. coli. Successful qualitative B. burgdorferi detection of 400 cfu deposited was achieved, with 25- and 20- times higher 197Au CPS intensity compared to negative control samples in absence of bacteria and E. coli showing great potential for real cases application.
- 13 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessImmunomagnetic and Immunogold Sandwich Assay for Borrelia burgdorferi detection from blood samples by fsLA-ICP-MS as a proof-of-concept diagnosis of the Lyme Disease
This article describes a proof-of-concept study of Borrelia burgdorferi qualitative detection from artificial blood samples by fsLA-ICP-MS, following an immunomagnetic separation and immunogold staining, showing great potential for diagnosis of the Lyme Disease (LD). A powerful magnetic separation method was established for B. burgdorferi preconcentration from 10 mL samples and blood matrix elimination, with the use of 300 nm diameter size magnetic nanoparticles (MNPs) conjugated to anti-B. burgdorferi. Qualitative 197Au fsLA-ICP-MS B. burgdorferi detection was demonstrated after bacteria immunogold staining with 3 nm gold nanoclusters (AuNCs) conjugated to another type of anti-B. burgdorferi. The complete sandwich immunoassay was performed in 10-times diluted artificial blood samples spiked with 2·106 bacterial cfu and the specificity was tested against E. coli. Successful qualitative B. burgdorferi detection of 400 cfu deposited was achieved, with 25- and 20- times higher 197Au CPS intensity compared to negative control samples in absence of bacteria and E. coli showing great potential for real cases application.
- Open Access
Population-specific bycatch risks in two vulnerable anadromous clupeids: insights from otolith microchemistry
Otolith microchemistry analysis revealed that bycatch of European shads—allis shad Alosa alosa (L. 1758) and twaite shad Alosa fallax (Lacépède 1803)— in western Iberian commercial fisheries removes individuals from a wide array of natal origins, with the most abundant source rivers suffering the heaviest losses. Spatial variation in bycatch risk was evident: specific marine areas exhibited high natal-origin diversity, reflecting complex dispersal. A. alosa showed extensive medium- and long-distance movements— including rare longitudinal displacements along the Cantabrian slope—and greater natal origin diversity than A. fallax , whose dispersal was largely restricted to middle-distance, latitudinal migrations. In both species, bycatches were dominated by the most abundant continental populations—Mondego and Minho for A. alosa , and Ulla and Minho for A. fallax —suggesting that these rivers function as source populations exporting individuals to sink populations through marine dispersal. Despite their differing dispersal ranges, both species displayed dual resident–dispersive contingents coexisting within the same populations, reflecting an interplay of river proximity, philopatry and resource availability. The stronger philopatry and constrained range of A. fallax imply heightened vulnerability to localized bycatch pressure near natal rivers, whereas A. alosa ’s broader dispersal and higher origin diversity expose multiple populations to risk at a regional scale. These species-specific dispersal capacities and metapopulation structures critically shape bycatch vulnerability. Incorporating natal-origin and dispersal data into transnational, ecosystem-based management—such as targeted temporal or spatial fishing restrictions at mixing hotspots—will be essential to safeguard metapopulation dynamics, mitigate bycatch mortality, and maintain ecological connectivity among European shad populations.
Open AccessPopulation-specific bycatch risks in two vulnerable anadromous clupeids: insights from otolith microchemistry
Otolith microchemistry analysis revealed that bycatch of European shads—allis shad Alosa alosa (L. 1758) and twaite shad Alosa fallax (Lacépède 1803)— in western Iberian commercial fisheries removes individuals from a wide array of natal origins, with the most abundant source rivers suffering the heaviest losses. Spatial variation in bycatch risk was evident: specific marine areas exhibited high natal-origin diversity, reflecting complex dispersal. A. alosa showed extensive medium- and long-distance movements— including rare longitudinal displacements along the Cantabrian slope—and greater natal origin diversity than A. fallax , whose dispersal was largely restricted to middle-distance, latitudinal migrations. In both species, bycatches were dominated by the most abundant continental populations—Mondego and Minho for A. alosa , and Ulla and Minho for A. fallax —suggesting that these rivers function as source populations exporting individuals to sink populations through marine dispersal. Despite their differing dispersal ranges, both species displayed dual resident–dispersive contingents coexisting within the same populations, reflecting an interplay of river proximity, philopatry and resource availability. The stronger philopatry and constrained range of A. fallax imply heightened vulnerability to localized bycatch pressure near natal rivers, whereas A. alosa ’s broader dispersal and higher origin diversity expose multiple populations to risk at a regional scale. These species-specific dispersal capacities and metapopulation structures critically shape bycatch vulnerability. Incorporating natal-origin and dispersal data into transnational, ecosystem-based management—such as targeted temporal or spatial fishing restrictions at mixing hotspots—will be essential to safeguard metapopulation dynamics, mitigate bycatch mortality, and maintain ecological connectivity among European shad populations.
- 29 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 40 (1) , 226-237
In situ copper isotope analysis by femtosecond laser ablation multicollector inductively coupled plasma mass spectrometry (fs-LA-MC-ICP-MS) on historical gold coins
This study investigates the potential of femtosecond laser ablation coupled with multicollector inductively coupled plasma mass spectrometry (fs-LA-MC-ICP-MS) for copper isotopic analysis in gold matrices applied to cultural heritage. Elemental analyses, which have commonly been used so far, provide information on the circulation of metal stocks based on elemental signatures but fail to pinpoint the precise source of gold. In contrast, isotopic analyses can offer a more accurate means of identifying the source of the metal, yet their application to gold matrices remains a challenge. For the first time, we successfully determined copper isotope ratio in gold matrices and achieved repeatabilities of 0.12‰ to 0.26‰ (2SD) for δ65Cu analyses carried out over up to 8 days, demonstrating the feasibility of copper isotopic analyses in gold coins at the micron-scale. This work was conducted using isotopically characterised in-house matrix-matched gold standard with copper concentrations varying from 4.5 wt% to 9.6 wt%. Our results open new avenues of research for provenance studies of precious museum artefacts and archaeological finds, with potential applications in authentication analyses on similar gold materials. The micro-sampling performed by femtosecond laser ablation minimises the damages on such ancient artifacts. However, the Cu concentrations had to be of at least 4 wt% with our analytical set up and a special care must be taken on the laser beam focusing in order to obtain accurate δ65Cu measurements in gold matrices.
- 29 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 40 (1) , 226-237
In situ copper isotope analysis by femtosecond laser ablation multicollector inductively coupled plasma mass spectrometry (fs-LA-MC-ICP-MS) on historical gold coins
This study investigates the potential of femtosecond laser ablation coupled with multicollector inductively coupled plasma mass spectrometry (fs-LA-MC-ICP-MS) for copper isotopic analysis in gold matrices applied to cultural heritage. Elemental analyses, which have commonly been used so far, provide information on the circulation of metal stocks based on elemental signatures but fail to pinpoint the precise source of gold. In contrast, isotopic analyses can offer a more accurate means of identifying the source of the metal, yet their application to gold matrices remains a challenge. For the first time, we successfully determined copper isotope ratio in gold matrices and achieved repeatabilities of 0.12‰ to 0.26‰ (2SD) for δ65Cu analyses carried out over up to 8 days, demonstrating the feasibility of copper isotopic analyses in gold coins at the micron-scale. This work was conducted using isotopically characterised in-house matrix-matched gold standard with copper concentrations varying from 4.5 wt% to 9.6 wt%. Our results open new avenues of research for provenance studies of precious museum artefacts and archaeological finds, with potential applications in authentication analyses on similar gold materials. The micro-sampling performed by femtosecond laser ablation minimises the damages on such ancient artifacts. However, the Cu concentrations had to be of at least 4 wt% with our analytical set up and a special care must be taken on the laser beam focusing in order to obtain accurate δ65Cu measurements in gold matrices.
- 18 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (6) , 1439-1443
Iron quantification at the sub femtogram level in magnetite hybrid silica methacrylate core–shell nanocomposite particles by sp-ICP-MS
This study highlights the application of single particle (sp)-ICP-MS in the field of hybrid (inorganic/organic) nanocomposite characterization as a valuable tool for monitoring the inorganic metal oxide nanoparticle (NP) distribution over the total nanocomposite population as well as for adaptation of synthesis conditions. Two types of magnetic nanocomposites carrying iron oxide NPs either on the surface or in the core were synthesized in the laboratory and characterized by TEM, XPS and Auger mapping for confirmation of iron localization. Analysis of 56Fe by sp-ICP-MS provided key information about the mass of iron integrated into each nanocomposite, at the sub femtogram level, which was directly correlated with their nanostructuration.
- 18 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (6) , 1439-1443
Iron quantification at the sub femtogram level in magnetite hybrid silica methacrylate core–shell nanocomposite particles by sp-ICP-MS
This study highlights the application of single particle (sp)-ICP-MS in the field of hybrid (inorganic/organic) nanocomposite characterization as a valuable tool for monitoring the inorganic metal oxide nanoparticle (NP) distribution over the total nanocomposite population as well as for adaptation of synthesis conditions. Two types of magnetic nanocomposites carrying iron oxide NPs either on the surface or in the core were synthesized in the laboratory and characterized by TEM, XPS and Auger mapping for confirmation of iron localization. Analysis of 56Fe by sp-ICP-MS provided key information about the mass of iron integrated into each nanocomposite, at the sub femtogram level, which was directly correlated with their nanostructuration.
- 1 February 2024
- Published by Canadian Science Publishing in Canadian Journal of Fisheries and Aquatic Sciences
- Vol. 81 (2) , 223-240
Freshwater fish otoliths record signals from both water and physiological processes: new insights from Sr/Ca and Ba/Ca ratios
Using strontium (Sr) and barium (Ba) in otoliths to determine natal origins and understand patterns of fish movements is based on the fundamental assumption that otoliths record water chemistry signals without any major alterations. Although prior studies highlighted that fish physiology can modify the water signal in otoliths, studies for freshwater fish are scarce. We exposed different groups of Atlantic salmon parr Salmo salar to different scenarios of ambient-level variations in Sr/Ca and Ba/Ca ratios and then combined otolith chemical profiles with environmental data (water chemistry and temperature), Fulton's index, and otolith growth rates to assess what factors explain/influence the elemental ratios of Sr and Ba in otoliths. Generalized additive mixed models (GAMMs) using water-based otolith composition, temperature, Fulton's index, and “individual” as explanatory variables allow to demonstrate that water chemistry alone cannot fully explain measured ratios in otoliths, except in scenarios involving significant changes in water chemistry. Other factors (physiological effects) should be accounted for reproducing short and minimal seasonal variations in water composition, considering that inter-individual variability contributes quite significantly in most scenarios.
- 1 February 2024
- Published by Canadian Science Publishing in Canadian Journal of Fisheries and Aquatic Sciences
- Vol. 81 (2) , 223-240
Freshwater fish otoliths record signals from both water and physiological processes: new insights from Sr/Ca and Ba/Ca ratios
Using strontium (Sr) and barium (Ba) in otoliths to determine natal origins and understand patterns of fish movements is based on the fundamental assumption that otoliths record water chemistry signals without any major alterations. Although prior studies highlighted that fish physiology can modify the water signal in otoliths, studies for freshwater fish are scarce. We exposed different groups of Atlantic salmon parr Salmo salar to different scenarios of ambient-level variations in Sr/Ca and Ba/Ca ratios and then combined otolith chemical profiles with environmental data (water chemistry and temperature), Fulton's index, and otolith growth rates to assess what factors explain/influence the elemental ratios of Sr and Ba in otoliths. Generalized additive mixed models (GAMMs) using water-based otolith composition, temperature, Fulton's index, and “individual” as explanatory variables allow to demonstrate that water chemistry alone cannot fully explain measured ratios in otoliths, except in scenarios involving significant changes in water chemistry. Other factors (physiological effects) should be accounted for reproducing short and minimal seasonal variations in water composition, considering that inter-individual variability contributes quite significantly in most scenarios.
- 22 September 2023
- Published by Wiley in Journal of Fish Biology
- Vol. 104 (1) , 20-33
Heterogeneity of otolith chemical composition from two‐dimensional mapping: Relationship with biomineralization mechanisms and implications for microchemistry analyses
Although otoliths are widely used as archives to infer life‐history traits and habitat use in fishes, their biomineralization process remains poorly understood. This lack of knowledge is problematic as it can lead to misinterpretation of the different types of signals (e.g., optical or chemical) that provide basic data for research in fish ecology, fisheries management, and species conservation. Otolith calcification relies on a complex system involving a pericrystalline fluid, the endolymph, whose organic and inorganic compositions are spatially heterogeneous for some constituents. This property stems from the particular structure of the calcifying saccular epithelium. In this study, we explored the spatial heterogeneity of elemental incorporation in otoliths for two species of high economic interest, European hake Merluccius merluccius (L. 1758) and European sea bass Dicentrarchus labrax (L. 1758). Two‐dimensional mappings of chemical elements were obtained using UV high‐repetition‐rate femtosecond laser ablation (fs‐LA) system coupled to a high‐resolution inductively coupled plasma sector field mass spectrometer analyses on transverse sections of sagittae. Results highlighted a clear asymmetry between proximal (sulcus) and distal (antisulcus) concentrations for elements such as magnesium (Mg), phosphorus (P), manganese (Mn), and potassium (K) with concentration gradient directions that varied depending on the element. Strontium (Sr) and barium (Ba) did not show a proximo‐distal gradient. These results are discussed in light of current knowledge on the endolymph composition and the mechanisms that lead to its compartmentalization, highlighting the need for further research on otolith biomineralization. Operational implications for studies based on otolith chemical composition are also discussed with emphasis on advice for sampling strategies to avoid analytical biases and the need for in‐depth analyses of analytical settings before comparing otolith signatures between species or geographical areas.
- 22 September 2023
- Published by Wiley in Journal of Fish Biology
- Vol. 104 (1) , 20-33
Heterogeneity of otolith chemical composition from two‐dimensional mapping: Relationship with biomineralization mechanisms and implications for microchemistry analyses
Although otoliths are widely used as archives to infer life‐history traits and habitat use in fishes, their biomineralization process remains poorly understood. This lack of knowledge is problematic as it can lead to misinterpretation of the different types of signals (e.g., optical or chemical) that provide basic data for research in fish ecology, fisheries management, and species conservation. Otolith calcification relies on a complex system involving a pericrystalline fluid, the endolymph, whose organic and inorganic compositions are spatially heterogeneous for some constituents. This property stems from the particular structure of the calcifying saccular epithelium. In this study, we explored the spatial heterogeneity of elemental incorporation in otoliths for two species of high economic interest, European hake Merluccius merluccius (L. 1758) and European sea bass Dicentrarchus labrax (L. 1758). Two‐dimensional mappings of chemical elements were obtained using UV high‐repetition‐rate femtosecond laser ablation (fs‐LA) system coupled to a high‐resolution inductively coupled plasma sector field mass spectrometer analyses on transverse sections of sagittae. Results highlighted a clear asymmetry between proximal (sulcus) and distal (antisulcus) concentrations for elements such as magnesium (Mg), phosphorus (P), manganese (Mn), and potassium (K) with concentration gradient directions that varied depending on the element. Strontium (Sr) and barium (Ba) did not show a proximo‐distal gradient. These results are discussed in light of current knowledge on the endolymph composition and the mechanisms that lead to its compartmentalization, highlighting the need for further research on otolith biomineralization. Operational implications for studies based on otolith chemical composition are also discussed with emphasis on advice for sampling strategies to avoid analytical biases and the need for in‐depth analyses of analytical settings before comparing otolith signatures between species or geographical areas.
- 1 March 2023
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (6) , 999-1014
Comparison of the fluctuations of the signals measured by ICP-MS after laser ablation of powdered geological materials prepared by four methods
Sample preparation is a crucial point for quantitative multi-elemental analses by LA-ICP-MS of powdered geological materials. Four different methods are compared in this study with respect to signal stability and intensity as follows: the preparation of glass beads (GlassB) by alkaline fusion method and three grinding and pelletizing methods relying on the use of an organic binder (VanBind, vanillic acid), an adhesive binder (MixGlue, methyl methacrylate) and a sol–gel process for glass formation (SolGel, chemical reaction of tetraethoxysilane), respectively. Sixty elements were analyzed by means of a ns-UV (213 nm) laser ablation system coupled to a single collector sector field ICP-MS with a low or medium mass resolution. Signal stability was found to strongly depend on the sample homogeneity provided by the preparation method. These methods were applied to three geological standard materials (CRM). The following criteria were used to evaluate and compare the methods: (1) proportion of the measurement cycles which are above a given signal intensity threshold (defined here as signal average ± 3 times the standard deviation), (2) signal stability of the analyzed nuclides (internal precision estimated by the relative standard deviations on raw count rates), (3) signal stability of the internal standards added to the samples, (4) external precision estimated by the relative standard deviation over five preparations for each geological CRM. For the majority of the analyzed elements, signals measured for samples prepared with the four methods are reproducible. Specific contamination in one or several elements (Cr, Fe, Co, Ni, Cu, Mo, W, Au and Bi) was observed depending on the sample preparation method. In addition, compared to grinding made with PTFE material, grinding performed with tungsten carbide material was found to produce better homogeneity, especially for the sol–gel and mixing with glue protocols, although some metallic contamination (W and Co) was observed. Thanks to the suppression of grain effects by alkaline melting, the glass bead method systematically provided signal stability and percentage of “over the threshold” close to those of the NIST glasses. This may be explained by the preparation of more homogeneous samples by alkaline melting. Finally, the described methods were found to be reproducible for the majority of the analyzed elements. Graphical abstract
- 1 March 2023
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (6) , 999-1014
Comparison of the fluctuations of the signals measured by ICP-MS after laser ablation of powdered geological materials prepared by four methods
Sample preparation is a crucial point for quantitative multi-elemental analses by LA-ICP-MS of powdered geological materials. Four different methods are compared in this study with respect to signal stability and intensity as follows: the preparation of glass beads (GlassB) by alkaline fusion method and three grinding and pelletizing methods relying on the use of an organic binder (VanBind, vanillic acid), an adhesive binder (MixGlue, methyl methacrylate) and a sol–gel process for glass formation (SolGel, chemical reaction of tetraethoxysilane), respectively. Sixty elements were analyzed by means of a ns-UV (213 nm) laser ablation system coupled to a single collector sector field ICP-MS with a low or medium mass resolution. Signal stability was found to strongly depend on the sample homogeneity provided by the preparation method. These methods were applied to three geological standard materials (CRM). The following criteria were used to evaluate and compare the methods: (1) proportion of the measurement cycles which are above a given signal intensity threshold (defined here as signal average ± 3 times the standard deviation), (2) signal stability of the analyzed nuclides (internal precision estimated by the relative standard deviations on raw count rates), (3) signal stability of the internal standards added to the samples, (4) external precision estimated by the relative standard deviation over five preparations for each geological CRM. For the majority of the analyzed elements, signals measured for samples prepared with the four methods are reproducible. Specific contamination in one or several elements (Cr, Fe, Co, Ni, Cu, Mo, W, Au and Bi) was observed depending on the sample preparation method. In addition, compared to grinding made with PTFE material, grinding performed with tungsten carbide material was found to produce better homogeneity, especially for the sol–gel and mixing with glue protocols, although some metallic contamination (W and Co) was observed. Thanks to the suppression of grain effects by alkaline melting, the glass bead method systematically provided signal stability and percentage of “over the threshold” close to those of the NIST glasses. This may be explained by the preparation of more homogeneous samples by alkaline melting. Finally, the described methods were found to be reproducible for the majority of the analyzed elements. Graphical abstract
- 10 November 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 38 (1) , 229-242
Cu fractionation, isotopic analysis, and data processing via machine learning: new approaches for the diagnosis and follow up of Wilson's disease via ICP-MS
Information about Cu fractionation and Cu isotopic composition can be paramount when investigating Wilson's disease (WD). This information can provide a better understanding of the metabolism of Cu. Most importantly, it may provide an easy way to diagnose and to follow the evolution of WD patients. For such purposes, protocols for Cu determination and Cu isotopic analysis via inductively coupled plasma mass spectrometry were investigated in this work, both in bulk serum and in the exchangeable copper (CuEXC) fractions. The CuEXC protocol provided satisfactory recovery values. Also, no significant mass fractionation during the whole analytical procedure (CuEXC production and/or Cu isolation) was detected. Analyses were carried out in controls (healthy persons), newborns, patients with hepatic disorders, and WD patients. While the results for Cu isotopic analysis are relevant (e.g., δ65Cu values were lower for both WD patients under chelating treatment and patients with hepatic problems in comparison with those values obtained for WD patients under Zn treatments, controls, and newborns) to comprehend Cu metabolism and to follow up the disease, the parameter that can help to better discern between WD patients and the rest of the patients tested (non-WD) was found to be the REC (relative exchangeable Cu). In this study, all the WD patients showed a REC higher than 17%, while the rest showed lower values. However, since establishing a universal threshold is complicated, machine learning was investigated to produce a model that can differentiate between WD and non-WD samples with excellent results (100% accuracy, albeit for a limited sample set). Most importantly, unlike other ML approaches, our model can also provide an uncertainty metric to indicate the reliability of the prediction, overall opening new ways to diagnose WD.
- 10 November 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 38 (1) , 229-242
Cu fractionation, isotopic analysis, and data processing via machine learning: new approaches for the diagnosis and follow up of Wilson's disease via ICP-MS
Information about Cu fractionation and Cu isotopic composition can be paramount when investigating Wilson's disease (WD). This information can provide a better understanding of the metabolism of Cu. Most importantly, it may provide an easy way to diagnose and to follow the evolution of WD patients. For such purposes, protocols for Cu determination and Cu isotopic analysis via inductively coupled plasma mass spectrometry were investigated in this work, both in bulk serum and in the exchangeable copper (CuEXC) fractions. The CuEXC protocol provided satisfactory recovery values. Also, no significant mass fractionation during the whole analytical procedure (CuEXC production and/or Cu isolation) was detected. Analyses were carried out in controls (healthy persons), newborns, patients with hepatic disorders, and WD patients. While the results for Cu isotopic analysis are relevant (e.g., δ65Cu values were lower for both WD patients under chelating treatment and patients with hepatic problems in comparison with those values obtained for WD patients under Zn treatments, controls, and newborns) to comprehend Cu metabolism and to follow up the disease, the parameter that can help to better discern between WD patients and the rest of the patients tested (non-WD) was found to be the REC (relative exchangeable Cu). In this study, all the WD patients showed a REC higher than 17%, while the rest showed lower values. However, since establishing a universal threshold is complicated, machine learning was investigated to produce a model that can differentiate between WD and non-WD samples with excellent results (100% accuracy, albeit for a limited sample set). Most importantly, unlike other ML approaches, our model can also provide an uncertainty metric to indicate the reliability of the prediction, overall opening new ways to diagnose WD.