SGSilvestre Roberto Gonzalez-Avila

Silvestre Roberto Gonzalez-Avila

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Silvestre Roberto Gonzalez-Avila has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pressure and wall shear stress from high-speed droplet impact

    by Silvestre Roberto Gonzalez-Avila, Qingyun Zeng, Claus-Dieter Ohl


  • Top Cited Papers

    The acoustic pressure generated by the cavitation bubble expansion and collapse near a rigid wall

    by Silvestre Roberto Gonzalez-Avila, Fabian Denner, Claus-Dieter Ohl

    We analyze systematically the acoustic transients emitted during the collapse of a laser-induced cavitation bubble for 0.4 ≤ γ ≤ 5.2 . γ is the standoff parameter, the ratio of the distance between the bubble's nucleation place and its maximum size. At the bubble collapse, the acoustic signals recorded contain several pressure peaks with rising times as fast as 18 ns. The time delay, Δ t , between these peaks is a few hundred nanoseconds apart for bubbles nucleated close to the boundary and decreases with γ. The pressure maxima correspond to shock fronts emitted around the time the bubble reaches its minimum volume and is correlated with the high-speed video recordings of the bubble dynamics. We also show that the amplitude ratio of the first to second acoustic transient is strongly dependent on γ. The experimental results are complemented with numerical simulations based on the Volume-of-Fluid method. The simulated results help clarify the physical mechanisms leading to the generation of acoustic transients and unveil in detail the morphology of the bubble approaching its minimum volume, a feature that cannot be resolved with the high-speed data. Furthermore, the numerical results reveal that the impact of the liquid jet on the rigid wall ensues a local increase in pressure over a significant time period, contrary to the shock wave formed during bubble collapse, which produces a sharp transient pressure peak that propagates radially outwards along the rigid wall. We also discuss the validity and shortcomings of the simulation and how to improve them in the future.


  • Splitting and jetting of cavitation bubbles in thin gaps

    by Qingyun Zeng, Silvestre Roberto Gonzalez-Avila, Claus-Dieter Ohl

    We study the dynamics of cavitation bubbles and induced jets in a thin liquid gap bounded by two rigid walls. The bubbles are generated experimentally with a focused laser pulse and are compared to simulations. The gap height $H$ and the distance of the position of bubble nucleation $h$ with respect to the nearest wall are varied. The bubble dynamics is recorded at 500 000 frames per second and is compared to simulation results from the compressible volume of fluid solver based on OpenFOAM that takes into account viscosity and surface tension. Good agreement of the spatio-temporal bubble dynamics between experiments and simulations is obtained. The findings are that the parameter space consists of three regions with distinct jetting dynamics that are characterized by two dimensionless parameters: the normalized gap height, $\unicode[STIX]{x1D702}=H/R_{max}$ , where $R_{max}$ is the spherical equivalent radius of the bubble at maximum expansion, and the normalized stand-off distance of the bubble measured from the centre of the gap, $\unicode[STIX]{x1D701}=(H/2-h)/R_{max}$ . The three qualitatively distinct jetting behaviours are the transferred jet impacting on the distant wall, the double jet as a result of a bubble splitting and impacting on both walls and the directed jet from a conically shaped bubble impacting on the closest wall. The impact velocity of the liquid jets onto the walls can reach more than $200~\text{m}~\text{s}^{-1}$ and strongly depends on the gap height and bubble position. The simulations reveal that the viscous boundary layers affect the bubble splitting and therefore the directions of jetting. Additionally, we found that with increasing length of the thin gap $L$ the bubble oscillation period increases and converges for sufficiently large gaps.


  • Open Access

    Mitigating cavitation erosion using biomimetic gas-entrapping microtextured surfaces (GEMS)

    by Silvestre Roberto Gonzalez-Avila, Dang Minh Nguyen, Sankara Arunachalam, Eddy M. Domingues, Himanshu Mishra, Claus-Dieter Ohl

    Insect-inspired surfaces repel bubble jets.


  • Jetting and shear stress enhancement from cavitation bubbles collapsing in a narrow gap

    by Silvestre Roberto Gonzalez-Avila, Anne Charlotte van Blokland, Qingyun Zeng, Claus-Dieter Ohl

    The dynamics of bubbles near infinite boundaries has been studied in great detail. Once viscosity is accounted for, large wall shear stresses are generated upon jet impact and spreading. Although earlier works covered bubble dynamics in thin gaps and revealed rich fluid dynamics, viscosity and the resulting mechanical action on the surface have not been addressed. Here, we report experimental and numerical studies of cavitation bubbles expanding and collapsing inside a narrow gap. High-speed recordings and numerical simulations demonstrate an unexpected enhancement of the jetting velocity, a centre of mass translation and a dramatic increase of the wall shear stress. For the latter, we use computational simulations and present the results as spatio-temporal shear stress maps, while the bubble is recorded with high-speed photography. To test the implications of the high wall shear stress combined with the bubble translation, we conducted two experimental demonstrations. The first shows particulate removal on the distant wall, and the second cell detachment and molecule delivery through the cell membrane.


  • Jetting of viscous droplets from cavitation-induced Rayleigh–Taylor instability

    by Qingyun Zeng, Silvestre Roberto Gonzalez-Avila, Sophie Ten Voorde, Claus-Dieter Ohl

    Liquid jetting and fragmentation are important in many industrial and medical applications. Here, we study the jetting from the surface of single liquid droplets undergoing internal volume oscillations. This is accomplished by an explosively expanding and collapsing vapour bubble within the droplet. We observe jets emerging from the droplet surface, which pinch off into finer secondary droplets. The jetting is excited by the spherical Rayleigh–Taylor instability where the radial acceleration is due to the oscillation of an internal bubble. We study this jetting and the effect of fluid viscosity experimentally and numerically. Experiments are carried out by levitating the droplet in an acoustic trap and generating a laser-induced cavitation bubble near the centre of the droplet. On the simulation side, the volume of fluid method (OpenFOAM) solves the compressible Navier–Stokes equations while accounting for surface tension and viscosity. Both two-dimensional (2-D) axisymmetric and 3-D simulations are performed and show good agreement with each other and the experimental observation. While the axisymmetric simulation reveals how the bubble dynamics results destabilizes the interface, only the 3-D simulation computes the geometrically correct slender jets. Overall, experiments and simulations show good agreement for the bubble dynamics, the onset of disturbances and the rapid ejection of filaments after bubble collapse. Additionally, an analytic model for the droplet surface perturbation growth is developed based on the spherical Rayleigh–Taylor instability analysis, which allows us to evaluate the surface stability over a large parameter space. The analytic model predicts correctly the onset of jetting as a function of Reynolds number and normalized internal bubble energy.


  • Parametric Investigations of the Induced Shear Stress by a Laser-Generated Bubble

    by Phoevos Koukouvinis, George Strotos, Qingyun Zeng, Silvestre Roberto Gonzalez-Avila, Andreas Theodorakakos, Manolis Gavaises, Claus-Dieter Ohl

    The present paper focuses on the simulation of the growth and collapse of a bubble in the vicinity of a wall. Both liquid and gas phases are assumed compressible and their interaction is handled with the Volume Of Fluid (VOF) method. The main interest is to quantify the influence of the induced shear stress and pressure pulse in the vicinity of the wall, for a variety of bubble sizes and bubble wall distances. Results are validated against prior experimental results, such as measurements of the bubble size, induced pressure field and shear stress on the wall. Simulation predictions indicate that the wall in the vicinity of the bubble is subjected both to high shear stresses and large pressure pulses, due to the growth and collapse of the bubble. In fact, pressure levels of 100bar or more and shear stresses up to 25kPa have been found at localized spots on the wall surface, at the region around the bubble. Moreover, the simulations are capable of providing additional insight to the experimental investigation, since the inherent limitations of the latter are avoided. The present work may be considered as a preliminary investigation in optimizing bubble energy and wall generation distance for ultrasound cleaning applications.


  • Top Cited Papers

    Wall shear stress from jetting cavitation bubbles

    by Qingyun Zeng, Silvestre Roberto Gonzalez-Avila, Rory Dijkink, Phoevos Koukouvinis, Manolis Gavaises, Claus-Dieter Ohl

    The collapse of a cavitation bubble near a rigid boundary induces a high-speed transient jet accelerating liquid onto the boundary. The shear flow produced by this event has many applications, examples of which are surface cleaning, cell membrane poration and enhanced cooling. Yet the magnitude and spatio-temporal distribution of the wall shear stress are not well understood, neither experimentally nor by simulations. Here we solve the flow in the boundary layer using an axisymmetric compressible volume-of-fluid solver from the OpenFOAM framework and discuss the resulting wall shear stress generated for a non-dimensional distance, $\unicode[STIX]{x1D6FE}=1.0$ ( $\unicode[STIX]{x1D6FE}=h/R_{max}$ , where $h$ is the distance of the initial bubble centre to the boundary, and $R_{max}$ is the maximum spherical equivalent radius of the bubble). The calculation of the wall shear stress is found to be reliable once the flow region with constant shear rate in the boundary layer is determined. Very high wall shear stresses of 100 kPa are found during the early spreading of the jet, followed by complex flows composed of annular stagnation rings and secondary vortices. Although the simulated bubble dynamics agrees very well with experiments, we obtain only qualitative agreement with experiments due to inherent experimental challenges.


  • Bjerknes Forces in Motion: Long‐Range Translational Motion and Chiral Directionality Switching in Bubble‐Propelled Micromotors via an Ultrasonic Pathway

    by James Guo Sheng Moo, Carmen C. Mayorga‐Martinez, Hong Wang, Wei Zhe Teo, Beng Hau Tan, Trung Dung Luong, Silvestre Roberto Gonzalez‐Avila, Claus‐Dieter Ohl, Martin Pumera

    Manipulation of a micromotor's locomotion has been the ultimate aim of scientists and engineers alike. While numerous roadmaps have been cast, the interswitching of the locomotion and directionality of these miniaturized machines remains elusive. In this report, ultrasound is utilized to produce stop/go motion on bubble‐propelled micromotors via Bjerknes forces. An intricate study using high‐speed camera on the interactions between the bubbles and micromotor is undertaken. The reciprocal action between oscillating bubbles aggregates and ejected microbubbles in an acoustic field demonstrate influence on the motion of the micromotor. Long‐range translational motion can be induced into the micromotor, when repulsive forces between bubble aggregates and ejected microbubbles are manifested in an acoustic field by Bjerknes forces. Additionally, such ultrasonic pulses demonstrate capability to change the directionality of the micromotor, where chirality of the locomotion can be switched. Here, introduction of pulses of ultrasonic irradiation demonstrates new capabilities to switch the motion of bubble‐propelled micromotors.


  • Synthetic jet generation by high-frequency cavitation

    by Milad Mohammadzadeh, Silvestre Roberto Gonzalez-Avila, Kun Liu, Qi Jie Wang, Claus-Dieter Ohl

    Cavitation bubbles are nucleated at a high repetition rate in water by delivering a pulsed laser through a fibre optic. Continuous high-frequency cavitation drives a stream away from the fibre tip. Using high-speed photography and particle image velocimetry, the stream is characterised as a synthetic jet, generated by trains of vortices induced by non-spherical bubble collapse. At low laser power, the bubbles collapse before the arrival of a subsequent laser pulse. Yet, by increasing the laser power, a system of bubbles is formed which leads to complex bubble–bubble interactions. The synthetic jet is observed regardless of the bubble formation regime, demonstrating the stability of the phenomenon. Synthetic jet generation by repetitive bubble collapse extends the well-studied acoustic streaming from small-amplitude bubble oscillations.