Maurício Portiolli Franco
Maurício Portiolli Franco has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Ataualpa Albert Carmo Braga
Departamento de Química Fundamental, Instituto de Química, Universidade de São Paulo, Avenida Professor Lineu Prestes, 748, São Paulo 05508-000, Brazil
6 shared publications - Henrique Eisi Toma
Department of Fundamental Chemistry, Institute of Chemistry, University of São Paulo, São Paulo, Brazil
3 shared publications - Liliana Marzorati
Univ Sao Paulo, Inst Chem, BR-05508900 Sao Paulo, Brazil
2 shared publications - Luca Michael Sihn
Institute of Chemistry, University of São Paulo, 05508-000 São Paulo, Brazil
2 shared publications - Alceu Totti Silveira Junior
Universidade de São Paulo, Brazil
1 shared publication - Alcindo Aparecido dos Santos
Department of Fundamental Chemistry, Institute of Chemistry, University of São Paulo, São Paulo 05508-000, Brazil
1 shared publication
Latest Publications
- Open Access
- 6 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Mechanistic Insights into Nickel-Catalyzed Heck–Matsuda Reactions: Theoretical Evidence for a Ni(I)/Ni(III) Catalytic Cycle
Nickel catalysis offers a cost-effective alternative to palladium in cross-coupling, though its role in the Heck--Matsuda (HM) reaction remains poorly defined. Using DFT, we examined Ni(0)/Ni(II) and Ni(I)/Ni(III) catalytic cycles employing pyridine--oxazoline (Pyox) ligands. The open-shell Ni(I)/Ni(III) pathway was found to be both kinetically and thermodynamically favored, featuring an oxidative addition barrier of 24.5 kcal mol -1 and a facile reductive elimination (3.7 kcal mol-1), whereas the singlet cycle exhibited higher barriers (22-35 kcal mol -1 ) for reductive elimination step. Energy span analysis (ESA) reveals that reaction turnover-frequency (TOF) determining states depend strongly on the olefin structure, shifting between oxidative addition, β-hydride and reductive elimination step. The calculated TOF for Ni(I)/Ni(III) systems reach values of 8.03 h-1 bypassing the high reductive-elimination barriers that limit the singlet pathway. For cyclic enols, β-hydride elimination governs selectivity, and is stabilized by Ni-OH interactions. These findings establish Ni(I)-based precatalysts as key to efficient and stereoselective HM reactions under mild conditions, expanding the accessible catalytic space beyond Pd analogues.
- 6 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMechanistic Insights into Nickel-Catalyzed Heck–Matsuda Reactions: Theoretical Evidence for a Ni(I)/Ni(III) Catalytic Cycle
Nickel catalysis offers a cost-effective alternative to palladium in cross-coupling, though its role in the Heck--Matsuda (HM) reaction remains poorly defined. Using DFT, we examined Ni(0)/Ni(II) and Ni(I)/Ni(III) catalytic cycles employing pyridine--oxazoline (Pyox) ligands. The open-shell Ni(I)/Ni(III) pathway was found to be both kinetically and thermodynamically favored, featuring an oxidative addition barrier of 24.5 kcal mol -1 and a facile reductive elimination (3.7 kcal mol-1), whereas the singlet cycle exhibited higher barriers (22-35 kcal mol -1 ) for reductive elimination step. Energy span analysis (ESA) reveals that reaction turnover-frequency (TOF) determining states depend strongly on the olefin structure, shifting between oxidative addition, β-hydride and reductive elimination step. The calculated TOF for Ni(I)/Ni(III) systems reach values of 8.03 h-1 bypassing the high reductive-elimination barriers that limit the singlet pathway. For cyclic enols, β-hydride elimination governs selectivity, and is stabilized by Ni-OH interactions. These findings establish Ni(I)-based precatalysts as key to efficient and stereoselective HM reactions under mild conditions, expanding the accessible catalytic space beyond Pd analogues.
- Open Access
- 18 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (26) , 15164-15173
The Effect of N-Donor Ligands on Activation of [Ru(tpy)(L–py)(AcCN)] 2+ Precatalysts in CO 2 Reduction Reaction Electrocatalysis
The electrocatalytic reduction of CO2 to CO in anhydrous media requires the formation of the M–CO2 bond. Using [Ru(tpy)(bpy)S]2+ as a model, and substituting a pyridine of bipyridine(bpy) for L = 123-triazole(123-trz), oxazole(oz), pyrrole(pyrr), pyrazole(pr z), or NHC was computationally studied using TPPSh/def2-svp for geometries, SP correction with def2-tzvp, and implicit acetonitrile solvation. Complexes with pyrr, prz, and NHC undergo both reductions on the tpy ligand, shifting the second reduction to more negative potentials compared to bpy, 123-trz, and oz (which are at least 0.15 V more positive). For the latter, the second reduction occurs on the bidentate ligand generating [Ru(tpy·)(py-L·)AcCN]0. The general reaction path features two reductions, solvent dissociation to a pentacoordinated complex, and CO2 association, except for NHC, where theoretical and experimental data suggest dissociation after the first reduction. Dissociation barriers varied from 19.0 (oz) to 12.9 kcal/mol (prz), while association barriers ranged from 9.0 (NHC) to 3.8 kcal/mol (oz). Finally, the cis/trans product ratio from CO2 association is directly influenced by the τ5 distortion parameter, serving as a qualitative indicator of selectivity.
- 18 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (26) , 15164-15173
Open AccessThe Effect of N-Donor Ligands on Activation of [Ru(tpy)(L–py)(AcCN)] 2+ Precatalysts in CO 2 Reduction Reaction Electrocatalysis
The electrocatalytic reduction of CO2 to CO in anhydrous media requires the formation of the M–CO2 bond. Using [Ru(tpy)(bpy)S]2+ as a model, and substituting a pyridine of bipyridine(bpy) for L = 123-triazole(123-trz), oxazole(oz), pyrrole(pyrr), pyrazole(pr z), or NHC was computationally studied using TPPSh/def2-svp for geometries, SP correction with def2-tzvp, and implicit acetonitrile solvation. Complexes with pyrr, prz, and NHC undergo both reductions on the tpy ligand, shifting the second reduction to more negative potentials compared to bpy, 123-trz, and oz (which are at least 0.15 V more positive). For the latter, the second reduction occurs on the bidentate ligand generating [Ru(tpy·)(py-L·)AcCN]0. The general reaction path features two reductions, solvent dissociation to a pentacoordinated complex, and CO2 association, except for NHC, where theoretical and experimental data suggest dissociation after the first reduction. Dissociation barriers varied from 19.0 (oz) to 12.9 kcal/mol (prz), while association barriers ranged from 9.0 (NHC) to 3.8 kcal/mol (oz). Finally, the cis/trans product ratio from CO2 association is directly influenced by the τ5 distortion parameter, serving as a qualitative indicator of selectivity.
- 14 March 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (10)
Evaluation of N‐binding through N1, N2 or N3 of 4‐R‐1,2,3‐Triazolate to [CuCO] + Complexes
We computationally investigated eight 4‐R‐1,2,3‐triazolates and their three possible N‐binding modes. Optimization of the pre‐ligands to verify NPA charges were done with M06‐2X/def2‐TZVPP. The complexes with [CuCO] + were optimized with M06 L/def2‐TZVPP and the electronic energies were improved with DLPNO‐CCSD(T)/cc‐pVTZ. Our calculations with pre‐ligands indicated the NPA charge of N2 as less negative than N1 and N3 by at least ∼0.100 e . Taking into account the complexes energies and vibrations, coordination via N2 is the most stable among all three nitrogens in gas‐phase by at least, 8 kJ/mol and the vibrational analysis of the indicates linkage isomer N2 as the best electron density donor among the three linkage isomers. The results exhibit a fine‐tuning of ligand donation properties that can be achieved by selecting different R groups in 4‐R‐1,2,3‐triazoles.
- 14 March 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (10)
Evaluation of N‐binding through N1, N2 or N3 of 4‐R‐1,2,3‐Triazolate to [CuCO] + Complexes
We computationally investigated eight 4‐R‐1,2,3‐triazolates and their three possible N‐binding modes. Optimization of the pre‐ligands to verify NPA charges were done with M06‐2X/def2‐TZVPP. The complexes with [CuCO] + were optimized with M06 L/def2‐TZVPP and the electronic energies were improved with DLPNO‐CCSD(T)/cc‐pVTZ. Our calculations with pre‐ligands indicated the NPA charge of N2 as less negative than N1 and N3 by at least ∼0.100 e . Taking into account the complexes energies and vibrations, coordination via N2 is the most stable among all three nitrogens in gas‐phase by at least, 8 kJ/mol and the vibrational analysis of the indicates linkage isomer N2 as the best electron density donor among the three linkage isomers. The results exhibit a fine‐tuning of ligand donation properties that can be achieved by selecting different R groups in 4‐R‐1,2,3‐triazoles.
- 12 March 2020
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 51 (7) , 1083-1091
Room temperature synthesis and Raman spectral evidence of carbon bond ranelate–gold nanoparticles
Ranelate ions, employed in the past as strontium salt for the treatment of osteoporosis, exhibit a rather interesting chemistry associated with a central thiophene ring encompassing two carboxylic groups, a cyanonitrile substituent, and a nitrile diacetate group. In spite of their unfavorable reduction potentials, around 1.26 V, they react very rapidly with HAuCl4 at room temperature, leading to decarboxylation at the C5 position in order to generate gold nanoparticles strongly stabilized by Au–C bonds. The reactions were elucidated by electrospray ionization mass spectrometry, ligand exchange kinetics, and by means of the surface‐enhanced Raman scattering effect. The gold nanoparticles were further characterized based on transmission electron microscopy and CytoViva hyperspectral microscopy.
- 12 March 2020
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 51 (7) , 1083-1091
Room temperature synthesis and Raman spectral evidence of carbon bond ranelate–gold nanoparticles
Ranelate ions, employed in the past as strontium salt for the treatment of osteoporosis, exhibit a rather interesting chemistry associated with a central thiophene ring encompassing two carboxylic groups, a cyanonitrile substituent, and a nitrile diacetate group. In spite of their unfavorable reduction potentials, around 1.26 V, they react very rapidly with HAuCl4 at room temperature, leading to decarboxylation at the C5 position in order to generate gold nanoparticles strongly stabilized by Au–C bonds. The reactions were elucidated by electrospray ionization mass spectrometry, ligand exchange kinetics, and by means of the surface‐enhanced Raman scattering effect. The gold nanoparticles were further characterized based on transmission electron microscopy and CytoViva hyperspectral microscopy.
- 1 March 2020
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1203
A new piperazine: Spectroscopic and theoretical conformational studies
- 1 March 2020
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1203
A new piperazine: Spectroscopic and theoretical conformational studies
- 18 December 2019
- Published by Wiley in ChemistrySelect
- Vol. 4 (47) , 13926-13931
On the Amazing Reactivity of the Ranelate Ion: New Applications of an Old Antiosporotic Drug
Ranelate ion, the major component of an old antiosporotic drug, exhibits a unusual chemical structure encompassing a thiophene ring with two carboxylic groups, a cyanonitrile substituent, and a nitrile diacetate group; it undergoes decarboxylation at the thiophene carbon‐5 position in acidic solutions, yielding a photoreactive (H5Ran) species which converts into a remarkably stable blue dithiophene dye in the presence of UV light and air.
- 18 December 2019
- Published by Wiley in ChemistrySelect
- Vol. 4 (47) , 13926-13931
On the Amazing Reactivity of the Ranelate Ion: New Applications of an Old Antiosporotic Drug
Ranelate ion, the major component of an old antiosporotic drug, exhibits a unusual chemical structure encompassing a thiophene ring with two carboxylic groups, a cyanonitrile substituent, and a nitrile diacetate group; it undergoes decarboxylation at the thiophene carbon‐5 position in acidic solutions, yielding a photoreactive (H5Ran) species which converts into a remarkably stable blue dithiophene dye in the presence of UV light and air.
- Open Access
- 2 December 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 11 (3) , 862-869
Base induced isomerisation of a phosphaethynolato-borane: mechanistic insights into boryl migration and decarbonylation to afford a triplet phosphinidene
We report on the (tert-butyl)isocyanide-catalysed isomersation of a phosphaethynolato-borane, [B]OCP ([B] = N,N′-bis(2,6-diisopropylphenyl)-2,3-dihydro-1H-1,3,2-diazaboryl), to its linkage isomer, a phosphaketenyl-borane, [B]PCO. Mechanistic insight into this unusual isomerisation was gained through a series of stoichiometric reactions of [B]OCP with isocyanides and theoretical calculations at the Density Functional Theory (DFT) level. [B]PCO decarbonylates under photolytic conditions to afford a novel boryl-substituted diphosphene, [B]PP[B]. This reaction proceeds via a transient triplet phosphinidene which we have been able to observe spectroscopically by Electron Paramagnetic Resonance (EPR) spectroscopy.
- 2 December 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 11 (3) , 862-869
Open AccessBase induced isomerisation of a phosphaethynolato-borane: mechanistic insights into boryl migration and decarbonylation to afford a triplet phosphinidene
We report on the (tert-butyl)isocyanide-catalysed isomersation of a phosphaethynolato-borane, [B]OCP ([B] = N,N′-bis(2,6-diisopropylphenyl)-2,3-dihydro-1H-1,3,2-diazaboryl), to its linkage isomer, a phosphaketenyl-borane, [B]PCO. Mechanistic insight into this unusual isomerisation was gained through a series of stoichiometric reactions of [B]OCP with isocyanides and theoretical calculations at the Density Functional Theory (DFT) level. [B]PCO decarbonylates under photolytic conditions to afford a novel boryl-substituted diphosphene, [B]PP[B]. This reaction proceeds via a transient triplet phosphinidene which we have been able to observe spectroscopically by Electron Paramagnetic Resonance (EPR) spectroscopy.
- 9 April 2018
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 57 (9) , 4898-4905
Unusual Photooxidation of S-Bonded Mercaptopyridine in a Mixed Ligand Ruthenium(II) Complex with Terpyridine and Bipyridine Ligands
An unusual photooxidation of a coordinated 4-mercaptopyridine (SpyH) ligand in the [Ru(Hmctpy)(dmbpy)(κS-SpyH)]2+complex (Hmctpy = 4′-carboxy-2,2′;6′,2″-terpyridine, dmbpy = 4,4′-dimethyl-2,2′-bipyridine) takes place under visible and UV irradiation, in aerated acetonitrile. The [Ru(mctpy)(dmbpy)(κS-SO2py)] sulfinato product has been characterized by a variety of methods, including X-ray diffraction which supports the presence of the Ru-κS-SpyH isomer in the starting complex. The photooxidation of the 4-mercaptopyridine ligand enhances the back-bonding interactions in the complex by means of the strongly acceptor 4-pyridinesulfinato-SO2py species, increasing the redox potential of the Ru(III)/Ru(II) couple significantly from 1.23 to 1.62 V. It also led to pronounced changes in the electronic and NMR spectra of the complexes, corroborated by DFT and ZINDO-S calculations. A possible mechanism based on referenced data of photooxidation has been proposed, which involves the formation of a reactive oxygen species and intermediate endoperoxide species, yielding a very stable Ru-sulfinato product. This novel species exhibits stronger luminescence (Φf = 0.004) than the starting complex under UV excitation.
- 9 April 2018
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 57 (9) , 4898-4905
Unusual Photooxidation of S-Bonded Mercaptopyridine in a Mixed Ligand Ruthenium(II) Complex with Terpyridine and Bipyridine Ligands
An unusual photooxidation of a coordinated 4-mercaptopyridine (SpyH) ligand in the [Ru(Hmctpy)(dmbpy)(κS-SpyH)]2+complex (Hmctpy = 4′-carboxy-2,2′;6′,2″-terpyridine, dmbpy = 4,4′-dimethyl-2,2′-bipyridine) takes place under visible and UV irradiation, in aerated acetonitrile. The [Ru(mctpy)(dmbpy)(κS-SO2py)] sulfinato product has been characterized by a variety of methods, including X-ray diffraction which supports the presence of the Ru-κS-SpyH isomer in the starting complex. The photooxidation of the 4-mercaptopyridine ligand enhances the back-bonding interactions in the complex by means of the strongly acceptor 4-pyridinesulfinato-SO2py species, increasing the redox potential of the Ru(III)/Ru(II) couple significantly from 1.23 to 1.62 V. It also led to pronounced changes in the electronic and NMR spectra of the complexes, corroborated by DFT and ZINDO-S calculations. A possible mechanism based on referenced data of photooxidation has been proposed, which involves the formation of a reactive oxygen species and intermediate endoperoxide species, yielding a very stable Ru-sulfinato product. This novel species exhibits stronger luminescence (Φf = 0.004) than the starting complex under UV excitation.
- 1 December 2017
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1149, 640-644
Conformation of some 2,4,6-trisubstitued pyridinium salts
- 1 December 2017
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1149, 640-644
Conformation of some 2,4,6-trisubstitued pyridinium salts
- Open Access
- 10 August 2017
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 2 (8) , 4431-4439
Stability Study of Hypervalent Tellurium Compounds in Aqueous Solutions
Hypervalent tellurium compounds (telluranes) are promising therapeutical agents with negligible toxicities for some diseases in animal models. The C–Te bond of organotellurium compounds is commonly considered unstable, disfavoring their applicability in biological studies. In this study, the stability of a set of telluranes composed of an inorganic derivative and noncharged and charged organic derivatives was monitored in aqueous media with 1H, 13C, and 125Te NMR spectroscopy and high-resolution mass spectrometry. Organic telluranes were found to be remarkably resistant and stable to hydrolysis, whereas the inorganic tellurane AS101 is totally converted to the hydrolysis product, trichlorooxytellurate, [TeOCl3]−, which was also observed in the hydrolysis of TeCl4. The noteworthy stability of organotelluranes in aqueous media makes them prone to further structure–activity relationship studies and to be considered for broad biological investigations.
- 10 August 2017
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 2 (8) , 4431-4439
Open AccessStability Study of Hypervalent Tellurium Compounds in Aqueous Solutions
Hypervalent tellurium compounds (telluranes) are promising therapeutical agents with negligible toxicities for some diseases in animal models. The C–Te bond of organotellurium compounds is commonly considered unstable, disfavoring their applicability in biological studies. In this study, the stability of a set of telluranes composed of an inorganic derivative and noncharged and charged organic derivatives was monitored in aqueous media with 1H, 13C, and 125Te NMR spectroscopy and high-resolution mass spectrometry. Organic telluranes were found to be remarkably resistant and stable to hydrolysis, whereas the inorganic tellurane AS101 is totally converted to the hydrolysis product, trichlorooxytellurate, [TeOCl3]−, which was also observed in the hydrolysis of TeCl4. The noteworthy stability of organotelluranes in aqueous media makes them prone to further structure–activity relationship studies and to be considered for broad biological investigations.