HOHasan Omur Ozer

Hasan Omur Ozer

*This is an algorithmically generated author record based on publicly available information.

Hasan Omur Ozer has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Makine Mühendisliğinde Yeni Nesil Teknolojiler

    by Emin Taner Elmas, Mert Demir, Hasan Ömür Özer, Muhammed Mustafa Uyar, Ahmet Beyzade Demirpolat

    Teknolojinin hızla geliştiği günümüz dünyasında makine mühendisliği, yalnızca klasik mekanik sistemlerin tasarımı ile sınırlı kalmayıp; dijital dönüşüm, akıllı üretim sistemleri ve sürdürülebilir enerji teknolojileri ile birlikte çok daha geniş bir perspektife ulaşmıştır. Endüstri 4.0, yapay zekâ destekli üretim, ileri malzeme teknolojileri ve yenilenebilir enerji sistemleri gibi gelişmeler, makine mühendisliğinin geleceğini yeniden şekillendirmektedir. Makine Mühendisliğinde Yeni Nesil Teknolojiler adlı bu eser; modern mühendislik yaklaşımlarını, güncel araştırmaları ve geleceğe yön veren teknolojik gelişmeleri bir araya getirerek okuyuculara kapsamlı bir bakış açısı sunmaktadır. Kitapta; ileri üretim teknolojileri, enerji sistemleri, akıllı malzemeler ve sürdürülebilir mühendislik çözümleri gibi alanlarda yapılan bilimsel çalışmalar ele alınmaktadır. Akademisyenler, araştırmacılar, lisans ve lisansüstü öğrencileri ile mühendislik alanında çalışan profesyoneller için önemli bir başvuru kaynağı niteliği taşıyan bu kitap, makine mühendisliğinin değişen ve gelişen yüzünü ortaya koymayı amaçlamaktadır. Disiplinler arası yaklaşımların önem kazandığı günümüzde, mühendislik alanındaki yenilikçi uygulamaların anlaşılmasına ve geliştirilmesine katkı sağlaması hedeflenmektedir. Bilimsel bilgi ile teknolojik yeniliklerin buluştuğu bu çalışma, makine mühendisliğinin geleceğine ışık tutan önemli bir kaynak olma niteliği taşımaktadır.


  • Open Access

    Kesir Türevli Diferansiyel Denklemlerin Kollokasyon Yöntemi ile Çözümü

    by Birkan Durak, Mehmet Şirin Demir, Hasan Ömür Özer

    Mühendislik problemlerini ve doğa olaylarını bir diferansiyel denklem aracılığıyla matematiksel bir formda yazmak ve ardından bu denklemi çözerek olgu hakkında bazı sonuçlara ulaşmak bilimsel uğraşının önemli bir kısmıdır. Özellikle değişimin göz önüne alındığı olayların incelemesinde tam sayılı veya kesir türevli denklemler kullanılır. Kesir türevli denklemleri içeren bazı çalışmalar termoelastisite, titreşim ve difüzyon süreçleri, biyomühendislik konularında verilmiştir. Ayrıca fizik, genetik, biyoloji, ekonomi ve istatistik gibi bilim dallarındaki çeşitli problemler bu tip denklemlerle incelenmiştir. Kesir türevli denklemler, sönümün frekansa bağlı olduğu malzemeli modelleri tahmin etmekte ve ayrıca gerçek fiziksel sistemlerin hareketini tanımlamada, viskoz bir akışkan içine daldırılmış rijit bir plakanın veya bir akışkan içindeki bir gazın hareketinin modellenmesinde kullanılmaktadır. Bu tür denklemlerin yaklaşık çözümlerinin bulunması hala önemli bir çalışma sahasıdır. Bu çalışmada ağırlıklı kalanlar yöntemlerinden olan kollokasyon, kesir türevli denklemlerin yaklaşık çözümünü bulmak amacıyla önerilmiştir. Yöntem sayesinde incelenen problemlerin çözümleri indirgendikleri denklem sisteminin çözümüyle bulunmuştur. Kollokasyon ile seçilen test problemlerine basit işlem ve programlama adımlarıyla yaklaşık çözümler bulunmuştur. Yöntemin çalışma algoritması verilerek, lineer olan veya olmayan, sınır ve başlangıç değer problemlerine uygulanması tartışılmıştır. Kollokasyonla bulunan değerler ile diğer araştırmacıların sonuçları arasında uyum yöntemin basit ve etkili bir yaklaşık çözüm yöntemi olduğunu göstermektedir.

  • Open Access

    Radyal Baz Fonksiyonu (RBF) kullanan Ağsız (Meshless) Çözüm Yöntemlerinde Şekil Parametresi ve Merkez Nokta Sayısının Çözüme Etkisi

    by Hüseyin Yıldız, Hasan Ömür Özer, Birkan Durak, Erol Uzal

    Yere sahiptir. Fiziksel olaylar, belirli sınır şartları sağlayan diferansiyel denklem sistemleri ile matematiksel olarak modellenebilir. Genellikle denklem sisteminin analitik çözümünü bulmak mümkün olmaz. Bu nedenle çeşitli sayısal yöntemler geliştirilmiştir. Günümüzde en çok kullanılan sayısal çözüm yöntemlerinden ikisi Sonlu Elemanlar Yöntemi (SEY) ve Sonlu Farklar Yöntemi (SFY)’dir. Bu yöntemlerde çözüm alanı ağ adı verilen küçük parçalara (bölgelere) ayrılarak hesaplamalar yapılır. Ağ örme işlemi oldukça karmaşık ve uzun zaman alan bir işlemdir. Kırılma mekaniği ve hareketli sistemlerin modellenmesinde her hesaplama sonrası ağın yenilenmesi gereklidir. Araştırmacılar, özellikle 20. yüzyılın sonlarında bu zorlukların üstesinden gelmek için ağsız çözüm yöntemleri geliştirdiler. Çözüm alanına düzenli veya düzensiz örnekleme noktaları yerleştiren ağsız çözüm teknikleri için uygun bir temel fonksiyon ailesi de gereklidir. Önerilen baz fonksiyon ailesi, diferansiyel denklem sistemini ve sınır şartlarını sağlayacak şekil katsayıları ile temsil edilir. Bu çalışmada radyal baz fonksiyon (RBF) kullanan ağsız çözüm yöntemi bir boyutlu ve iki boyutlu ısı geçiş problemlerine uygulanmıştır. İncelenen problemlerde merkez noktaların ve şekil katsayısının benzetim sonuçlarına etkisi incelenmiştir. Bulgular, kontrol (kollokasyon) noktalarının sayısının doğrudan çözümün kararlılığıyla ilişkili olduğunu ve kontrol nokta sayısının merkez nokta sayısından fazla olduğunda kararlılığa katkıda bulunduğunu göstermektedir. Şekil yapısının uygun çözümü için merkez nokta değişikliklerinin büyüklüğünde bir artışın gerekli olduğu gözlemlenmiştir. Bu çalışmanın sonuçları, şekil katsayısı arttıkça doğru bir çözüme ulaşmak için merkez nokta sayısının ve yineleme sayısının da arttırılması gerektiğini göstermektedir.

  • Open Access

    Fuzzy Logic Enhanced Second-Order Sliding Mode Controller Design for an Experimental Twin Rotor System Under External Disturbances

    by Hasan Omur Ozer, Yuksel Hacioglu, Nurkan Yagiz

    Background: The twin rotor model is frequently studied by researchers because although it has a basic structure the coupled pitch and yaw motions are adequately represented. However, it is quite difficult to obtain an efficient controller due to external disturbances. Classical sliding mode controller (SMC), which is of first order, is recognized to be robust in case of parameter changes and external disturbances especially when the sliding motion takes place, but it possesses chattering in the control input which may damage the mechanical parts of the system. Purpose: In this study it was aimed to design a robust controller without chattering effect which will be used for the control of the twin rotor system in real time experiments. Methods: To remedy the chattering issue, a novel fuzzy logic enhanced second-order sliding mode controller (FSOSMC) based on super twisting algorithm is proposed. This controller suppresses chattering while enhancing the robustness of the controller where the sliding surface slope parameter is updated online via a fuzzy logic unit. Then the proposed controller is implemented on an experimental twin-rotor system which has highly nonlinear and coupled dynamics. Results: Real time experiments were performed on the twin rotor system using the proposed FSOSMC. For comparison purpose the SMC and second-order sliding mode controller (SOSMC) were also applied to the same system. The results have shown that the proposed controller increased the tracking performance without increasing the control effort while reducing the chattering. Conclusions: The experimental results verified the success of the designed FSOSMC, therefore it may be recommended for the robust and precise control of aerial vehicles. Graphical


  • Open Access

    Flutter of a Plate at High Supersonic Speeds

    by Aziz Sezgin, Birkan Durak, Alaattin Sayın, Huseyin Yildiz, Hasan Omur Ozer, Lutfi Emir Sakman, Sule Kapkin, Erol Uzal

    The vibrations of plate structures placed in a supersonic flow was considered. The undisturbed fluid flow was parallel to the plate. This type of problem is especially important in the aerospace industry, where it is named panel flutter. It has been noticed for a long time that panel flutter may be problematic at high speeds. In this article, two specific problems were treated: in the first one, the plate was in the form of an infinite strip and the flow was in the direction of its finite length. Rigid walls indefinitely extended from the sides of the plate. In the second problem, the plate was a finite rectangle and the flow was parallel to one of its sides. The rest of the plane of the rectangle was again rigid. The first problem was a limiting case of the second problem. The flow was modeled by piston theory, which assumes that the fluid pressure on the plate is proportional to its local slope. This approximation is widely used at high speeds (supersonic speeds in the range of M > 1), and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution was also found by using the collocation method. The contribution of this study is the correlation between the flutter velocity and the other parameters of the plate. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows for the quick estimation of the flutter velocity. These simple expressions were deduced by least squares fits to the computed flutter velocities.


  • Open Access

    Eigenfrequencies of a Three-Dimensional Arbitrarily-Curved Beam

    by Lutfi Emir Sakman, Hasan Omur Ozer, Aziz Sezgin, Birkan Durak, Sule Kapkin

    Research Problem: The eigenvalue problem for the vibrations of an arbitrarily-curved three-dimensional beam with circular cross-section is solved by a series expansion method under various boundary conditions. Methodology: The governing differential equations of motion are derived based on Euler-Bernoulli beam theory using the Hamilton’s principle. The general equations are given for any space curved beam with variable curvature and torsion, and solved for a specific example using the method of power series. Results and Conclusions: The eigenfrequencies of a specific 3D beam were computed and compared with the eigenfrequencies of straight, circular, and helical beams, all having the same length. It was found that the eigenfrequencies of the 3D beam tend to increase slower compared to the other cases as the mode number increases. The main contribution of this study is the computation of the eigenfrequencies of a truly three-dimensional beam: torsion and curvature change continously along the beam length. In constrast, the most studied 3D case, helical beam, has constant curvature and torsion.


  • Open Access

    Approximate Solutions of Nonlinear Boundary Value Problems by Collocation Methods Compared to Newer Methods

    by Birkan Durak, Hasan Ömür Özer, Aziz Sezgi̇n, Lütfi Emir Sakman

    A large variety of new methods are being developed for fast and efficient solutions of nonlinear boundary value problems. Some of these methods are, Adomian decomposition (ADM), differential transform (DTM), least squares vector machines (LSSVMM), and multiple variational iteration (MVIM). A natural question arises as to how efficient and simple to use these newer methods are compared to classical methods. One of the simplest and widely applicable classical methods is the collocation method. The overall performance of collocation method and the newer methods are compared on a number of problems, which were previously used to benchmark the newer methods. It is concluded that, at least for the problems considered, the collocation method performs as successfully as the newer methods.


  • Open Access

    Bazı İntegral Denklemlerin Nokta Kollokasyon Yöntemiyle Çözümü

    by Birkan Durak, Hasan Ömür Özer, Şule Kapkin, Hüseyin Yildiz

    In several engineering or physics problems, particularly those involving electromagnetic theory, thermal and radiation effects, acoustics, elasticity, and some fluid mechanics, it is not always easy or possible to find the analytical solution of integral equations that describe them. For this reason, numerical techniques are used. In this study, Point-collocation method was applied to linear and nonlinear, Volterra and Fredholm type integral equations and the performance and accuracy of the method was compared with several other methods that seem to be popular choices. As the base functions, a suitably chosen family of polynomials were employed. The convergence of the method was verified by increasing the number of polynomial base functions. The results demonstrate that the collocation method performs well even with a relatively low number of base functions and is a good candidate for solving a wide variety of integral equations. Nonlinear problems take longer to calculate approximate solution coefficients than linear problems. Furthermore, it is necessary to use the real and smallest coefficients found in order to obtain a suitable approximate solution to these problems.

  • Open Access

    COLLOCATION METHOD APPLIED TO NUMERICAL SOLUTION OF INTEGRO-DIFFERENTIAL EQUATIONS

    by Birkan Durak, Aziz Sezgi̇n, Hasan Ömür Özer, Lütfi Emir Sakman, Şule Kapkin

    Integro-differential equations are encountered in such fields of study as mechanics, physics, chemistry, biophysics, astronomy, economic theory, and population dynamics. In rare cases the solution methods for differential and/or integral equations can be generalized to integro-differential equations; but in general, numerical methods have to be applied. Recent years have seen the development of a large number of methods applicable to integro-differential equations. The present study aims to compare these newer methods with the classical method of point collocation, which is one of the weighted residual methods. The method was applied to test problems chosen from the literature, both linear and nonlinear integro-differential equations, and was seen to give good results.


  • Open Access

    Flutter of a Plate at High Supersonic Speeds

    by Aziz Sezgin, Birkan Durak, Alaattin Sayın, Huseyin Yildiz, Hasan Omur Ozer, Lutfi Emir Sakman, Sule Kapkin, Erol Uzal

    Vibrations of plate structures placed in a supersonic flow is considered. The undisturbed fluid flow is parallel to the plate. Two specific problems are treated: in the first one the plate is in the form of an infinite strip and the flow is in the direction of its finite length. Rigid walls extend from the sides of the plate indefinitely. In the second problem, the plate is a finite rectangle and the flow is parallel to one of its sides. The first problem is a limiting case of the second problem. The flow is modeled by piston theory which assumes that the fluid pressure on the plate is proportional to local slope. This approximation is widely used at high speeds, and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution is also carried out by using the collocation method. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows quick estimation of flutter velocity.