Arthur Sousa de Sena
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Arthur Sousa de Sena has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Pedro Henrique Juliano Nardelli
Lappeenranta-Lahti University of Technology
14 shared publications - Matti Latva-Aho
Centre for Wireless Communications (CWC), University of Oulu, Oulu, Finland
10 shared publications - Nurul Huda Mahmood
University of Oulu
10 shared publications - Daniel Benevides da Costa
King Fahd University of Petroleum and Minerals
9 shared publications - Constantinos B. Papadias
Smart Wireless Future Technologies (SWiFT) Lab, Research, Technology and Innovation Network (RTIN), The American College of Greece, Athens, Greece
7 shared publications - Petar Popovski
Department of Electronic Systems, Aalborg University, Aalborg, Denmark
6 shared publications
Latest Publications
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1806-1810
Passive RIS Is Not Silent: Revisiting Performance Limits Under Thermal Noise
Reconfigurable intelligent surfaces (RISs) have emerged as a promising solution for enabling energy-efficient and flexible spectrum usage in wireless communication, particularly in the context of sixth-generation (6G) networks. While passive RIS architectures are widely regarded as virtually noiseless due to the lack of active components, this idealized assumption can lead to misleading performance evaluations. In this paper, we revisit this assumption and demonstrate that the thermal noise generated by passive RIS elements, though often neglected, can significantly affect system performance. We propose a tractable approximated analytical framework that incorporates RIS-induced thermal noise into the system and derive closed-form expressions for key performance metrics, such as outage probability and throughput. Simulation results validate our approximated analysis and high-light the substantial performance discrepancies that arise when RIS thermal noise is ignored. Our results offer valuable insights into the trade-offs between receiver and RIS noise, guiding the development of robust and efficient 6G communication systems.
- 17 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1806-1810
Passive RIS Is Not Silent: Revisiting Performance Limits Under Thermal Noise
Reconfigurable intelligent surfaces (RISs) have emerged as a promising solution for enabling energy-efficient and flexible spectrum usage in wireless communication, particularly in the context of sixth-generation (6G) networks. While passive RIS architectures are widely regarded as virtually noiseless due to the lack of active components, this idealized assumption can lead to misleading performance evaluations. In this paper, we revisit this assumption and demonstrate that the thermal noise generated by passive RIS elements, though often neglected, can significantly affect system performance. We propose a tractable approximated analytical framework that incorporates RIS-induced thermal noise into the system and derive closed-form expressions for key performance metrics, such as outage probability and throughput. Simulation results validate our approximated analysis and high-light the substantial performance discrepancies that arise when RIS thermal noise is ignored. Our results offer valuable insights into the trade-offs between receiver and RIS noise, guiding the development of robust and efficient 6G communication systems.
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. PP (08908044) , 1-8
Dimensioning and Optimization of Reliability Coverage in Local 6G Networks
Enabling vertical use cases for the Sixth Generation Wireless (6G) networks, such as automated manufacturing, immersive Extended Reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of “reliability coverage,” defined as the percentage of the area covered by communication services operating under well-defined reliability and performance targets. Reliability coverage allows us to unify the different network design tasks operating at different time scales, namely resource orchestration and allocation, resulting in a single framework for dimensioning and optimization in local 6G networks. The two time scales, when considered together, yield remarkably consistent results and allow us to observe how stringent reliability/latency requirements translate into the increased wireless network resource demands.
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. PP (08908044) , 1-8
Dimensioning and Optimization of Reliability Coverage in Local 6G Networks
Enabling vertical use cases for the Sixth Generation Wireless (6G) networks, such as automated manufacturing, immersive Extended Reality (XR), and self-driving fleets, will require network designs that meet reliability and latency targets in well-defined service areas. In order to establish a quantifiable design objective, we introduce the novel concept of “reliability coverage,” defined as the percentage of the area covered by communication services operating under well-defined reliability and performance targets. Reliability coverage allows us to unify the different network design tasks operating at different time scales, namely resource orchestration and allocation, resulting in a single framework for dimensioning and optimization in local 6G networks. The two time scales, when considered together, yield remarkably consistent results and allow us to observe how stringent reliability/latency requirements translate into the increased wireless network resource demands.
- Open Access
- 20 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-16
On the Robustness of RSMA to Adversarial BD-RIS-Induced Interference
This article investigates the robustness of ratesplitting multiple access (RSMA) in multi-user multiple-input single-output (MISO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected reconfigurable intelligent surface (RIS) architectures. Valid random reflection coefficients are generated exploiting the Takagi factorization, while potent aligned interference attacks are achieved through optimization strategies based on a quadratically constrained quadratic program (QCQP) reformulation followed by projections onto the unitary manifold. Our numerical findings reveal that, when perfect channel state information (CSI) is available, RSMA behaves similarly to space-division multiple access (SDMA) and thus is highly susceptible to the attack, with BD-RIS inducing severe performance loss and significantly outperforming diagonal RIS. However, under imperfect CSI, RSMA consistently demonstrates significantly greater robustness than SDMA, particularly as the system's transmit power increases.
- 20 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-16
Open AccessOn the Robustness of RSMA to Adversarial BD-RIS-Induced Interference
This article investigates the robustness of ratesplitting multiple access (RSMA) in multi-user multiple-input single-output (MISO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected reconfigurable intelligent surface (RIS) architectures. Valid random reflection coefficients are generated exploiting the Takagi factorization, while potent aligned interference attacks are achieved through optimization strategies based on a quadratically constrained quadratic program (QCQP) reformulation followed by projections onto the unitary manifold. Our numerical findings reveal that, when perfect channel state information (CSI) is available, RSMA behaves similarly to space-division multiple access (SDMA) and thus is highly susceptible to the attack, with BD-RIS inducing severe performance loss and significantly outperforming diagonal RIS. However, under imperfect CSI, RSMA consistently demonstrates significantly greater robustness than SDMA, particularly as the system's transmit power increases.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- p. 1-16
UAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- p. 1-16
Open AccessUAV-Mounted Hybrid RIS-Assisted ISAC-RSMA: Performance Analysis with Imperfect CSI and SIC
- Open Access
- 17 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (11) , 2731-2735
Nested Tensor-Based Channel Estimation for Stacked Intelligent Metasurface-Assisted Wireless Networks
Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable intelligent surface (RIS) layers to enable wave-based beamforming. Both channel estimation and the calibration of inter-layer channel coefficients, that is, the channels between consecutive RIS layers, play a crucial role in the performance of SIM-assisted systems. However, the execution of these essential tasks can be challenging due to the large dimensionality inherent in the SIM architecture. In this letter, we address this challenge by proposing a novel tensor-based joint channel estimation and inter-layer channel coefficients calibration protocol exploiting the PARATUCK2 decomposition and the alternating least squares method, which can be applied to an SIM-assisted multi-user multiple-input single-output system to reduce the complexity of the multi-layer SIM structure. Numerical results prove the superiority of the proposed scheme in comparison with state-of-the-art schemes. Specifically, the proposed tensor-based protocol can achieve a normalized mean squared error of less than 0.01, which is orders of magnitude better than state-of-the-art schemes for SIM-assisted systems, while incurring similar levels of computational complexity or training overhead.
- 17 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (11) , 2731-2735
Open AccessNested Tensor-Based Channel Estimation for Stacked Intelligent Metasurface-Assisted Wireless Networks
Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable intelligent surface (RIS) layers to enable wave-based beamforming. Both channel estimation and the calibration of inter-layer channel coefficients, that is, the channels between consecutive RIS layers, play a crucial role in the performance of SIM-assisted systems. However, the execution of these essential tasks can be challenging due to the large dimensionality inherent in the SIM architecture. In this letter, we address this challenge by proposing a novel tensor-based joint channel estimation and inter-layer channel coefficients calibration protocol exploiting the PARATUCK2 decomposition and the alternating least squares method, which can be applied to an SIM-assisted multi-user multiple-input single-output system to reduce the complexity of the multi-layer SIM structure. Numerical results prove the superiority of the proposed scheme in comparison with state-of-the-art schemes. Specifically, the proposed tensor-based protocol can achieve a normalized mean squared error of less than 0.01, which is orders of magnitude better than state-of-the-art schemes for SIM-assisted systems, while incurring similar levels of computational complexity or training overhead.
- Open Access
- 27 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 5639-5656
Max-Min Fairness for Stacked Intelligent Metasurface-Assisted Multi-User MISO Systems
Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable surface layers to enable flexible wave-based beamforming. In this paper, we focus on an SIM-assisted multi-user multiple-input single-output system, where it is essential to ensure that all users receive a fair and reliable service level. To this end, we develop two max-min fairness algorithms based on instantaneous channel state information (CSI) and statistical CSI. For the instantaneous CSI case, we propose an alternating optimization algorithm that jointly optimizes power allocation using geometric programming and wave-based beamforming coefficients using the gradient descent-ascent method. For the statistical CSI case, since deriving an exact expression for the average minimum achievable rate is analytically intractable, we derive a tight upper bound and thereby formulate a stochastic optimization problem. This problem is then solved, capitalizing on an alternating approach combining geometric programming and gradient descent algorithms, to obtain the optimal policies. Our numerical results show significant improvements in the minimum achievable rate compared to the benchmark schemes. In particular, for the instantaneous CSI scenario, the individual impact of the optimal wave-based beamforming is significantly higher than that of the power allocation strategy. Moreover, the proposed upper bound is shown to be tight in the low signal-to-noise ratio regime under the statistical CSI
- 27 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 5639-5656
Open AccessMax-Min Fairness for Stacked Intelligent Metasurface-Assisted Multi-User MISO Systems
Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable surface layers to enable flexible wave-based beamforming. In this paper, we focus on an SIM-assisted multi-user multiple-input single-output system, where it is essential to ensure that all users receive a fair and reliable service level. To this end, we develop two max-min fairness algorithms based on instantaneous channel state information (CSI) and statistical CSI. For the instantaneous CSI case, we propose an alternating optimization algorithm that jointly optimizes power allocation using geometric programming and wave-based beamforming coefficients using the gradient descent-ascent method. For the statistical CSI case, since deriving an exact expression for the average minimum achievable rate is analytically intractable, we derive a tight upper bound and thereby formulate a stochastic optimization problem. This problem is then solved, capitalizing on an alternating approach combining geometric programming and gradient descent algorithms, to obtain the optimal policies. Our numerical results show significant improvements in the minimum achievable rate compared to the benchmark schemes. In particular, for the instantaneous CSI scenario, the individual impact of the optimal wave-based beamforming is significantly higher than that of the power allocation strategy. Moreover, the proposed upper bound is shown to be tight in the low signal-to-noise ratio regime under the statistical CSI
- Open Access
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (9) , 8014-8024
Finite Blocklength Analysis for SWIPT-Enabled RSMA Networks Under Realistic Assumptions
Efficient connectivity for energy constrained massive Internet of Things (IoT) nodes is among the key design challenges for future wireless networks. In this work, we analyze the downlink performance of a massive IoT network considering simultaneous wireless information and power transfer (SWIPT). We consider the rate-splitting multiple access (RSMA) scheme in the finite blocklength (FBL) regime under realistic assumptions such imperfect channel state information (CSI), imperfect successive interference cancellation (SIC), and hardware impairments in the energy harvesting circuitry. The system performance is assessed by evaluating closed-form expressions for the block-error rate (BLER) and goodput. We also derive analytical expressions for the average harvested energy considering linear and non-linear characteristics of the energy-constrained IoT nodes. The effect of the power splitting (PS) factor under linear and non-linear regimes on the BLER is also discussed. Monte Carlo simulations corroborate the accuracy of the derived expressions, which highlight the impact of increasing the blocklength and demonstrate the performance degradation generated by imperfect CSI, imperfect SIC, and hardware impairment. The results reveal that the integration of PS-SWIPT in RSMA networks can offer around 28% ~ 33% performance improvement in terms of BLER over SWIPT-enabled non-orthogonal multiple access networks.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (9) , 8014-8024
Open AccessFinite Blocklength Analysis for SWIPT-Enabled RSMA Networks Under Realistic Assumptions
Efficient connectivity for energy constrained massive Internet of Things (IoT) nodes is among the key design challenges for future wireless networks. In this work, we analyze the downlink performance of a massive IoT network considering simultaneous wireless information and power transfer (SWIPT). We consider the rate-splitting multiple access (RSMA) scheme in the finite blocklength (FBL) regime under realistic assumptions such imperfect channel state information (CSI), imperfect successive interference cancellation (SIC), and hardware impairments in the energy harvesting circuitry. The system performance is assessed by evaluating closed-form expressions for the block-error rate (BLER) and goodput. We also derive analytical expressions for the average harvested energy considering linear and non-linear characteristics of the energy-constrained IoT nodes. The effect of the power splitting (PS) factor under linear and non-linear regimes on the BLER is also discussed. Monte Carlo simulations corroborate the accuracy of the derived expressions, which highlight the impact of increasing the blocklength and demonstrate the performance degradation generated by imperfect CSI, imperfect SIC, and hardware impairment. The results reveal that the integration of PS-SWIPT in RSMA networks can offer around 28% ~ 33% performance improvement in terms of BLER over SWIPT-enabled non-orthogonal multiple access networks.
- Open Access
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (8) , 12658-12672
Efficient Channel Prediction for Beyond Diagonal RIS-Assisted MIMO Systems With Channel Aging
Novel reconfigurable intelligent surface (RIS) architectures, known as beyond diagonal RISs (BD-RISs), have been proposed to enhance reflection efficiency and expand RIS capabilities. However, their passive nature, non-diagonal reflection matrix, and the large number of coupled reflecting elements complicate the channel state information (CSI) estimation process. The challenge further escalates in scenarios with fast-varying channels. In this paper, we address this challenge by proposing novel joint channel estimation and prediction strategies with low overhead and high accuracy for two different RIS architectures in a BD-RIS-assisted multiple-input multiple-output system under correlated fast-fading environments with channel aging. The channel estimation procedure utilizes the Tucker2 decomposition with bilinear alternative least squares, which is exploited to decompose the cascade channels of the BD-RIS-assisted system into effective channels of reduced dimension. The channel prediction framework is based on a convolutional neural network combined with an autoregressive predictor. The estimated/predicted CSI is then utilized to optimize the RIS phase shifts aiming at the maximization of the downlink sum rate. Insightful simulation results demonstrate that our proposed approach is robust to channel aging, and exhibits a high estimation accuracy. Moreover, our scheme can deliver a high average downlink sum rate, outperforming other state-of-the-art channel estimation methods. The results also reveal a remarkable reduction in pilot overhead of up to 98% compared to baseline schemes, all imposing low computational complexity.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (8) , 12658-12672
Open AccessEfficient Channel Prediction for Beyond Diagonal RIS-Assisted MIMO Systems With Channel Aging
Novel reconfigurable intelligent surface (RIS) architectures, known as beyond diagonal RISs (BD-RISs), have been proposed to enhance reflection efficiency and expand RIS capabilities. However, their passive nature, non-diagonal reflection matrix, and the large number of coupled reflecting elements complicate the channel state information (CSI) estimation process. The challenge further escalates in scenarios with fast-varying channels. In this paper, we address this challenge by proposing novel joint channel estimation and prediction strategies with low overhead and high accuracy for two different RIS architectures in a BD-RIS-assisted multiple-input multiple-output system under correlated fast-fading environments with channel aging. The channel estimation procedure utilizes the Tucker2 decomposition with bilinear alternative least squares, which is exploited to decompose the cascade channels of the BD-RIS-assisted system into effective channels of reduced dimension. The channel prediction framework is based on a convolutional neural network combined with an autoregressive predictor. The estimated/predicted CSI is then utilized to optimize the RIS phase shifts aiming at the maximization of the downlink sum rate. Insightful simulation results demonstrate that our proposed approach is robust to channel aging, and exhibits a high estimation accuracy. Moreover, our scheme can deliver a high average downlink sum rate, outperforming other state-of-the-art channel estimation methods. The results also reveal a remarkable reduction in pilot overhead of up to 98% compared to baseline schemes, all imposing low computational complexity.
- Open Access
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (1) , 749-766
Beyond Diagonal RIS for Multi-Band Multi-Cell MIMO Networks: A Practical Frequency-Dependent Model and Performance Analysis
This paper delves into the unexplored frequency-dependent characteristics of beyond diagonal reconfigurable intelligent surfaces (BD-RISs). A generalized practical frequency-dependent reflection model is proposed as a fundamental framework for configuring fully-connected and group-connected RISs in a multi-band multi-base station (BS) multiple-input multiple-output (MIMO) network. Leveraging this practical model, multi-objective optimization strategies are formulated to maximize the received power at multiple users connected to different BSs, each operating under a distinct carrier frequency. By relying on matrix theory and exploiting the symmetric structure of the reflection matrices inherent to BD-RISs, relaxed tractable versions of the challenging problems are achieved for scenarios with obstructed and unobstructed direct channel links. The relaxed solutions are then combined with codebook-based approaches to configure the practical capacitance values for the BD-RISs. Simulation results reveal the frequency-dependent behaviors of different RIS architectures and demonstrate the effectiveness of the proposed schemes. Notably, BD-RISs exhibit high reflection performance across the intended frequency range, remarkably outperforming conventional single-connected RISs. Moreover, the proposed optimization approaches prove effective in enabling the targeted operation of BD-RISs across one or more carrier frequencies. The results also shed light on the potential for harmful interference in the absence of synchronization between RISs and adjacent BSs.
- 22 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (1) , 749-766
Open AccessBeyond Diagonal RIS for Multi-Band Multi-Cell MIMO Networks: A Practical Frequency-Dependent Model and Performance Analysis
This paper delves into the unexplored frequency-dependent characteristics of beyond diagonal reconfigurable intelligent surfaces (BD-RISs). A generalized practical frequency-dependent reflection model is proposed as a fundamental framework for configuring fully-connected and group-connected RISs in a multi-band multi-base station (BS) multiple-input multiple-output (MIMO) network. Leveraging this practical model, multi-objective optimization strategies are formulated to maximize the received power at multiple users connected to different BSs, each operating under a distinct carrier frequency. By relying on matrix theory and exploiting the symmetric structure of the reflection matrices inherent to BD-RISs, relaxed tractable versions of the challenging problems are achieved for scenarios with obstructed and unobstructed direct channel links. The relaxed solutions are then combined with codebook-based approaches to configure the practical capacitance values for the BD-RISs. Simulation results reveal the frequency-dependent behaviors of different RIS architectures and demonstrate the effectiveness of the proposed schemes. Notably, BD-RISs exhibit high reflection performance across the intended frequency range, remarkably outperforming conventional single-connected RISs. Moreover, the proposed optimization approaches prove effective in enabling the targeted operation of BD-RISs across one or more carrier frequencies. The results also shed light on the potential for harmful interference in the absence of synchronization between RISs and adjacent BSs.