Florencia A. Son
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Florencia A. Son has a total of 184 co-authors. Here are the top co-authors by number of shared publications:
- Omar K. Farha
Northwestern University
42 shared publications - Timur Islamoglu
Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, United States
19 shared publications - Karam B. Idrees
International Institute for Nanotechnology and Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, United States
15 shared publications - Zhijie Chen
Zhejiang University
12 shared publications - Xingjie Wang
South China University of Technology
11 shared publications - Megan C. Wasson
International Institute for Nanotechnology and Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, United States
10 shared publications
Latest Publications
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8099-8109
Milling-Induced Defect Engineering of Zr-Based Metal–Organic Frameworks and Its Catalytic Applications
Defect engineering of metal-organic frameworks (MOFs) has been shown to impact many properties of these porous structures, including affecting the accessible pore volume as well as introducing additional active sites to modify the catalytic activity of the frameworks. However, this defect engineering has previously primarily been carried out through synthesis-based methods. Ball-milling of the frameworks presents an alternative method for the introduction of defects, which has not been largely investigated for its effects on catalysis. The complex pressure states experienced during milling result in property changes, both enhancing and diminishing defect accessibility, necessitating a detailed investigation. This work characterizes three Zirconium-based MOFs (UiO-66, MOF-808, and NU-1000), using total scattering X-ray diffraction, infrared spectroscopy, and thermal analysis to investigate their collapse and defect introduction during all stages of ball-milling. It then assesses the utility of ball-milling UiO-66 to different extents as a method for improving catalytic abilities within two reactions, the formation of propargylamine, and the conversion of glucose to fructose. The mechanical amorphization of UiO-66 led to either an increase or a decrease in catalytic ability depending on the milling time and the reaction investigated.
- 2 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (5) , 8099-8109
Milling-Induced Defect Engineering of Zr-Based Metal–Organic Frameworks and Its Catalytic Applications
Defect engineering of metal-organic frameworks (MOFs) has been shown to impact many properties of these porous structures, including affecting the accessible pore volume as well as introducing additional active sites to modify the catalytic activity of the frameworks. However, this defect engineering has previously primarily been carried out through synthesis-based methods. Ball-milling of the frameworks presents an alternative method for the introduction of defects, which has not been largely investigated for its effects on catalysis. The complex pressure states experienced during milling result in property changes, both enhancing and diminishing defect accessibility, necessitating a detailed investigation. This work characterizes three Zirconium-based MOFs (UiO-66, MOF-808, and NU-1000), using total scattering X-ray diffraction, infrared spectroscopy, and thermal analysis to investigate their collapse and defect introduction during all stages of ball-milling. It then assesses the utility of ball-milling UiO-66 to different extents as a method for improving catalytic abilities within two reactions, the formation of propargylamine, and the conversion of glucose to fructose. The mechanical amorphization of UiO-66 led to either an increase or a decrease in catalytic ability depending on the milling time and the reaction investigated.
- Open Access
- 10 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4831-4841
Exceeding flexpectations: a combined experimental and computational investigation of structural flexibility in 3-dimensional linker-based metal–organic frameworks
Designing sorbents for the separation of molecules with sub-angstrom differences in size requires precise control over pore size and environment, which can be challenging to establish in the presence of structural flexibility. However, metal–organic frameworks (MOFs) that incorporate 3-dimensional (3D) linkers—ditopic ligands with 3-dimensional, sterically bulky cores—are well-suited to address this challenge, as 3D linkers enable sub-angstrom level control over pore size by mitigating the effects of structural flexibility. In this study, we used a combined computational and experimental approach to quantify flexibility in two systems of MOFs with increasing linker bulkiness, leveraging these systems to distinguish between two classes of flexibility: global and local. Specifically, we used density functional theory (DFT) calculations to understand the electronic energy landscapes of MIL-53(Al), MIL-47(V) and their corresponding 3D linker analogues of increasing bulkiness. We further characterized the mechanical properties of these materials with DFT calculations of elastic tensors and in practical compression conditions using in situ variable pressure X-ray diffraction experiments. Finally, we illustrated the importance of establishing sub-angstrom level pore control by demonstrating the effects of each type of flexibility on the adsorption properties of MOFs using grand canonical Monte Carlo simulations.
- 10 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4831-4841
Open AccessExceeding flexpectations: a combined experimental and computational investigation of structural flexibility in 3-dimensional linker-based metal–organic frameworks
Designing sorbents for the separation of molecules with sub-angstrom differences in size requires precise control over pore size and environment, which can be challenging to establish in the presence of structural flexibility. However, metal–organic frameworks (MOFs) that incorporate 3-dimensional (3D) linkers—ditopic ligands with 3-dimensional, sterically bulky cores—are well-suited to address this challenge, as 3D linkers enable sub-angstrom level control over pore size by mitigating the effects of structural flexibility. In this study, we used a combined computational and experimental approach to quantify flexibility in two systems of MOFs with increasing linker bulkiness, leveraging these systems to distinguish between two classes of flexibility: global and local. Specifically, we used density functional theory (DFT) calculations to understand the electronic energy landscapes of MIL-53(Al), MIL-47(V) and their corresponding 3D linker analogues of increasing bulkiness. We further characterized the mechanical properties of these materials with DFT calculations of elastic tensors and in practical compression conditions using in situ variable pressure X-ray diffraction experiments. Finally, we illustrated the importance of establishing sub-angstrom level pore control by demonstrating the effects of each type of flexibility on the adsorption properties of MOFs using grand canonical Monte Carlo simulations.
- 10 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31534-31542
Measuring Mass Transfer of n-Hexane and 2-Chloroethyl Ethyl Sulfide in Sorbent/Polymer Fiber Composites Using a Volumetric Adsorption Apparatus
The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n-hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n-hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.
- 10 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31534-31542
Measuring Mass Transfer of n-Hexane and 2-Chloroethyl Ethyl Sulfide in Sorbent/Polymer Fiber Composites Using a Volumetric Adsorption Apparatus
The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n-hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n-hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.
- 5 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31798-31806
Decorating the Node of a Zirconium-Based Metal–Organic Framework to Tune Adsorption Behavior and Surface Permeation
Surface barriers are commonly observed in nanoporous materials. Although researchers have explored methods to repair defects or create flawless crystals to mitigate surface barriers, these approaches may not always be practical or readily achievable in targeted metal-organic frameworks (MOFs). In our study, we propose an alternative approach focusing on the introduction of diverse ligands onto a MOF-808 node to finely adjust its adsorption and mass transport characteristics. Significantly, our findings indicate that while adsorption curves can be inferred based on the MOF's chemical composition and the probing molecule, surface permeabilities exhibit variations dependent on the specific probe utilized and the incorporated ligand. Our investigation, considering van der Waals forces exclusively between the adsorbate (e.g., n-hexane, propane, and benzene) and the adsorbent, revealed that augmenting these interactions can indeed improve surface permeation to a certain extent. Conversely, strong adsorption resulting from hydrogen bonding interactions, particularly with water in modified MOFs, led to compromised permeation within the MOF crystals. These outcomes provide valuable insights for the porous materials community and offer guidance in the development of adsorbents with enhanced affinity and superior mass transport properties for gases and vapors.
- 5 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31798-31806
Decorating the Node of a Zirconium-Based Metal–Organic Framework to Tune Adsorption Behavior and Surface Permeation
Surface barriers are commonly observed in nanoporous materials. Although researchers have explored methods to repair defects or create flawless crystals to mitigate surface barriers, these approaches may not always be practical or readily achievable in targeted metal-organic frameworks (MOFs). In our study, we propose an alternative approach focusing on the introduction of diverse ligands onto a MOF-808 node to finely adjust its adsorption and mass transport characteristics. Significantly, our findings indicate that while adsorption curves can be inferred based on the MOF's chemical composition and the probing molecule, surface permeabilities exhibit variations dependent on the specific probe utilized and the incorporated ligand. Our investigation, considering van der Waals forces exclusively between the adsorbate (e.g., n-hexane, propane, and benzene) and the adsorbent, revealed that augmenting these interactions can indeed improve surface permeation to a certain extent. Conversely, strong adsorption resulting from hydrogen bonding interactions, particularly with water in modified MOFs, led to compromised permeation within the MOF crystals. These outcomes provide valuable insights for the porous materials community and offer guidance in the development of adsorbents with enhanced affinity and superior mass transport properties for gases and vapors.
- 25 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (22) , 15130-15142
Precise Modulation of CO2 Sorption in Ti8Ce2–Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility
Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti8Ce2-oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti8Ce2-BA (BA denotes benzoic acid) manifests a distinctive two-step profile during the CO2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between the CO2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. These insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.
- 25 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (22) , 15130-15142
Precise Modulation of CO2 Sorption in Ti8Ce2–Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility
Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti8Ce2-oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti8Ce2-BA (BA denotes benzoic acid) manifests a distinctive two-step profile during the CO2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between the CO2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. These insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.
- Open Access
- 2 November 2023
- Published by Springer Nature in npj Regenerative Medicine
- Vol. 8 (1) , 1-14
Topical application of synthetic melanin promotes tissue repair
In acute skin injury, healing is impaired by the excessive release of reactive oxygen species (ROS). Melanin, an efficient scavenger of radical species in the skin, performs a key role in ROS scavenging in response to UV radiation and is upregulated in response to toxic insult. In a chemical injury model in mice, we demonstrate that the topical application of synthetic melanin particles (SMPs) significantly decreases edema, reduces eschar detachment time, and increases the rate of wound area reduction compared to vehicle controls. Furthermore, these results were replicated in a UV-injury model. Immune array analysis shows downregulated gene expression in apoptotic and inflammatory signaling pathways consistent with histological reduction in apoptosis. Mechanistically, synthetic melanin intervention increases superoxide dismutase (SOD) activity, decreases Mmp9 expression, and suppresses ERK1/2 phosphorylation. Furthermore, we observed that the application of SMPs caused increased populations of anti-inflammatory immune cells to accumulate in the skin, mirroring their decrease from splenic populations. To enhance antioxidant capacity, an engineered biomimetic High Surface Area SMP was deployed, exhibiting increased wound healing efficiency. Finally, in human skin explants, SMP intervention significantly decreased the damage caused by chemical injury. Therefore, SMPs are promising and effective candidates as topical therapies for accelerated wound healing, including via pathways validated in human skin.
- 2 November 2023
- Published by Springer Nature in npj Regenerative Medicine
- Vol. 8 (1) , 1-14
Open AccessTopical application of synthetic melanin promotes tissue repair
In acute skin injury, healing is impaired by the excessive release of reactive oxygen species (ROS). Melanin, an efficient scavenger of radical species in the skin, performs a key role in ROS scavenging in response to UV radiation and is upregulated in response to toxic insult. In a chemical injury model in mice, we demonstrate that the topical application of synthetic melanin particles (SMPs) significantly decreases edema, reduces eschar detachment time, and increases the rate of wound area reduction compared to vehicle controls. Furthermore, these results were replicated in a UV-injury model. Immune array analysis shows downregulated gene expression in apoptotic and inflammatory signaling pathways consistent with histological reduction in apoptosis. Mechanistically, synthetic melanin intervention increases superoxide dismutase (SOD) activity, decreases Mmp9 expression, and suppresses ERK1/2 phosphorylation. Furthermore, we observed that the application of SMPs caused increased populations of anti-inflammatory immune cells to accumulate in the skin, mirroring their decrease from splenic populations. To enhance antioxidant capacity, an engineered biomimetic High Surface Area SMP was deployed, exhibiting increased wound healing efficiency. Finally, in human skin explants, SMP intervention significantly decreased the damage caused by chemical injury. Therefore, SMPs are promising and effective candidates as topical therapies for accelerated wound healing, including via pathways validated in human skin.
- Open Access
- 5 September 2023
- Published by Springer Nature in Communications Chemistry
- Vol. 6 (1) , 1-8
Investigating the mechanical stability of flexible metal–organic frameworks
As we continue to develop metal–organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (3)2, and MIL-88B-(CH3)4. In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.
- 5 September 2023
- Published by Springer Nature in Communications Chemistry
- Vol. 6 (1) , 1-8
Open AccessInvestigating the mechanical stability of flexible metal–organic frameworks
As we continue to develop metal–organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (3)2, and MIL-88B-(CH3)4. In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.
- 18 July 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (30) , 16383-16390
Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation
Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.
- 18 July 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (30) , 16383-16390
Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation
Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.
- Open Access
- 16 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (26) , 10092-10099
Survival of Zirconium-Based Metal–Organic Framework Crystallinity at Extreme Pressures
Recent research on metal-organic frameworks (MOFs) has shown a shift from considering only the crystalline high-porosity phases to exploring their amorphous counterparts. Applying pressure to a crystalline MOF is a common method of amorphization, as MOFs contain large void spaces that can collapse, reducing the accessible surface area. This can be either a desired change or indeed an unwanted side effect of the application of pressure. In either case, understanding the MOF's pressure response is extremely important. Three such MOFs with varying pore sizes (UiO-66, MOF-808, and NU-1000) were investigated using in situ high-pressure X-ray diffraction and Raman spectroscopy. Partial crystallinity was observed in all three MOFs above 10 GPa, along with some recovery of crystallinity on return to ambient conditions if the frameworks were not compressed above thresholds of 13.3, 14.2, and 12.3 GPa for UiO-66, MOF-808, and NU-1000, respectively. This threshold was marked by an unexpected increase in one or more lattice parameters with pressure in all MOFs. Comparison of compressibility between MOFs suggests penetration of the pressure-transmitting oil into MOF-808 and NU-1000. The survival of some crystallinity above 10 GPa in all of these MOFs despite their differing pore sizes and extents of oil penetration demonstrates the importance of high-pressure characterization of known structures.
- 16 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (26) , 10092-10099
Open AccessSurvival of Zirconium-Based Metal–Organic Framework Crystallinity at Extreme Pressures
Recent research on metal-organic frameworks (MOFs) has shown a shift from considering only the crystalline high-porosity phases to exploring their amorphous counterparts. Applying pressure to a crystalline MOF is a common method of amorphization, as MOFs contain large void spaces that can collapse, reducing the accessible surface area. This can be either a desired change or indeed an unwanted side effect of the application of pressure. In either case, understanding the MOF's pressure response is extremely important. Three such MOFs with varying pore sizes (UiO-66, MOF-808, and NU-1000) were investigated using in situ high-pressure X-ray diffraction and Raman spectroscopy. Partial crystallinity was observed in all three MOFs above 10 GPa, along with some recovery of crystallinity on return to ambient conditions if the frameworks were not compressed above thresholds of 13.3, 14.2, and 12.3 GPa for UiO-66, MOF-808, and NU-1000, respectively. This threshold was marked by an unexpected increase in one or more lattice parameters with pressure in all MOFs. Comparison of compressibility between MOFs suggests penetration of the pressure-transmitting oil into MOF-808 and NU-1000. The survival of some crystallinity above 10 GPa in all of these MOFs despite their differing pore sizes and extents of oil penetration demonstrates the importance of high-pressure characterization of known structures.
- 10 March 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (11) , 6434-6441
Engineering Metal–Organic Frameworks for Selective Separation of Hexane Isomers Using 3-Dimensional Linkers
Metal-organic frameworks (MOFs) are highly tunable materials with potential for use as porous media in non-thermal adsorption or membrane-based separations. However, many separations target molecules with sub-angstrom differences in size, requiring precise control over the pore size. Herein, we demonstrate that this precise control can be achieved by installing a three-dimensional linker in an MOF with one-dimensional channels. Specifically, we synthesized single crystals and bulk powder of NU-2002, an isostructural framework to MIL-53 with bicyclo[1.1.1]pentane-1,3-dicarboxylic acid as the organic linker component. Using variable-temperature X-ray diffraction studies, we show that increasing linker dimensionality limits structural breathing relative to MIL-53. Furthermore, single-component adsorption isotherms demonstrate the efficacy of this material for separating hexane isomers based on the different sizes and shapes of these isomers.
- 10 March 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (11) , 6434-6441
Engineering Metal–Organic Frameworks for Selective Separation of Hexane Isomers Using 3-Dimensional Linkers
Metal-organic frameworks (MOFs) are highly tunable materials with potential for use as porous media in non-thermal adsorption or membrane-based separations. However, many separations target molecules with sub-angstrom differences in size, requiring precise control over the pore size. Herein, we demonstrate that this precise control can be achieved by installing a three-dimensional linker in an MOF with one-dimensional channels. Specifically, we synthesized single crystals and bulk powder of NU-2002, an isostructural framework to MIL-53 with bicyclo[1.1.1]pentane-1,3-dicarboxylic acid as the organic linker component. Using variable-temperature X-ray diffraction studies, we show that increasing linker dimensionality limits structural breathing relative to MIL-53. Furthermore, single-component adsorption isotherms demonstrate the efficacy of this material for separating hexane isomers based on the different sizes and shapes of these isomers.