FMFrancesco Mirani

Francesco Mirani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Francesco Mirani has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nanofoam in action: a versatile tool for laser-plasma interaction experiments

    by Alessandro Maffini, Kevin Ambrogioni, David Dellasega, Marta Galbiati, Maria Sole Galli de Magistris, Francesco Gatti, Matteo Iaccarino, Claudia Mallimaci, Francesco Mirani, Davide Orecchia, et al.

    Low-density near-critical materials in laser-plasma interaction (LPI) stand out for their capability in enhancing the coupling between the laser radiation and the target. Indeed, they can be exploited for fundamental physics studies, optimised particle acceleration for practical applications, and inertial confinement fusion. However, the modelling of complex non-linear phenomena occurring during the interaction of these materials and high-intensity lasers, together with the accurate control and characterisation of their physical properties, are still object of intense research. In this context, near-critical nanofoams produced via pulsed laser deposition represent a promising option owing to the versatility and controllability of their deposition technique. In this paper, we report on our modelling and experimental activities related to laser-nanofoam interaction. In particular, we first present the deposition methodology, focusing on the production of nanofoams with controlled composition and morphology. Then, we show our numerical strategy to model the foam aggregation. We also discuss how the nanofoam morphology affects the LPI by integrating the realistic nanostructure in particle-in-cell simulations, focusing on various regimes of interaction. Lastly, we present examples of applications of nanofoam-based targets via numerical simulations and experiments, focusing also on the open issues for reaching the requirements for full-fledged applications. Our work demonstrates nanofoam-based targets as a versatile tool to effectively optimise and advance LPI physics.

  • Addressing the role of advanced targets for enhanced control of laser-driven hadron sources

    by Francesco Mirani, Kevin Ambrogioni, Alessandro Maffini, Francesco Gatti, Maria Sole Galli De Magistris, Marta Galbiati, Davide Vavassori, Davide Orecchia, Dario Rastelli, Davide Mazzucconi, et al.


  • Top Cited Papers
    Open Access

    Rapid chromatic alteration of Street Art: Mechanisms of deterioration of the painting materials of the 20 years of Freedom and Democracy mural

    by Nicolò Guarnieri, Alessia Di Benedetto, Daniela Comelli, Francesco Mirani, David Dellasega, Laura Pagnin, Sara Goidanich, Lucia Toniolo


  • Open Access

    Design of a Semiconductor-Based Proton Spectrometer for Laser-Driven Sources Applications

    by Francesco Gatti, Francesco Mirani, Dario Rastelli, Davide Mazzucconi, José Luis Henares, Antonia Morabito, Andrea Pola, Matteo Passoni

    Laser-driven proton sources are attracting increasing interest because of their promising uses in several fields, from basic science to materials analysis. Applications require quantitative and accurate measurements of the laser-driven particle spectra. However, the peculiar features of these sources pose several challenges to their in-depth characterization. In this work, we present the design of a spectrometer based on silicon photodiodes, focusing on TW-class laser proton sources and their foreseen applications. The device comprises a dipole magnet to deflect the ions along different trajectories according to their energies. The magnet can also be removed to avoid beam deflection and make the particles available for applications. We exploit a finely shaped differential filter to cut the contribution of unwanted heavy ions and a photodiode array for proton detection. These elements are described and experimentally characterized, allowing the development of an analytical description useful to size the instrument. We perform Monte Carlo simulations to validate the model and calibrate the system. The retrieved data are used to simulate the detection of protons in a typical laser-driven particle acceleration experiment. The spectrum reconstructed by Monte Carlo simulations wellmatches the distribution provided as source, demonstrating the founding principles of the spectrometer. Lastly, a first test in a real laser environment at Centro de Láseres Pulsados (1 PW VEGA-3 laser) is also presented, showing the full response of the device and its potential as a laser-driven proton beam monitor in application-oriented scenarios.


  • Open Access

    Laser-driven production with advanced targets of Copper-64 for medical applications

    by A. Maffini, F. Mirani, A. C. Giovannelli, A. Formenti, M. Passoni

    Radionuclides are of paramount importance in nuclear medicine both for clinical uses and radiopharmaceutical production. Among the others, nuclides suitable for theranostics like Copper-64 are particularly attractive since they can play both a diagnostic and therapeutic role. In the last years, the growing demand for these nuclides stimulated the research of new solutions, along with cyclotrons already in use, for their production. In this respect, a promising alternative is laser-driven proton accelerators based on the interaction of superintense laser pulses with target materials. Because of their potential compactness and flexibility, they are under investigation for several applications ranging from materials science to nuclear medicine. Moreover, the use of advanced Double-Layer targets (DLTs) was identified as a viable route to increase the number and energy of the accelerated protons to satisfy the requirements of demanding applications. In this contribution, we numerically investigate the use of DLT-based laser-driven sources for Copper-64 production. We show that activities relevant to pre-clinical studies can be achieved with an existing 150 TW laser and DLTs. Moreover, we extend the discussion by considering a broad range of laser systems by exploiting a theoretical model. Our results can guide the choice of laser and target parameters for future experimental investigations.


  • Laser-Driven Neutron Generation with Near-Critical Targets and Application to Materials Characterization

    by F. Mirani, A. Maffini, M. Passoni

    Laser-driven neutrons arouse outstanding interest because of their promising uses in several fields, from basic science to materials inspection. Many experiments achieved neutron yields [108−1010n/(sr s)] suitable for applications. These results were obtained by exploiting high-energy (approximately 10–100J) lasers working at low repetition rates. Instead, adopting advanced target configurations like near-critical double-layer targets (DLTs) and compact, commercial lasers was slightly considered. Here, a theoretical study is performed to address neutron generation with commercial (40–400TW, 1–15J) systems and DLTs. We investigate proton acceleration and interaction with various materials to induce (p,n) reactions. DLTs allow achieving 1–2 orders of magnitude larger neutron yields and maximum energies 3 times higher than with single-layer targets. Then, the feasibility of two materials characterization techniques, namely fast neutron activation analysis and pulsed fast neutron resonance radiography, is assessed. The results indicate that they can be performed with commercial lasers and DLTs.


  • Open Access

    Superintense laser-driven photon activation analysis

    by Francesco Mirani, Daniele Calzolari, Arianna Formenti, Matteo Passoni

    Laser-driven radiation sources are attracting increasing attention for several materials science applications. While laser-driven ions, electrons and neutrons have already been considered to carry out the elemental characterization of materials, the possibility to exploit high-energy photons remains unexplored. Indeed, the electrons generated by the interaction of an ultra-intense laser pulse with a near-critical material can be turned into high-energy photons via bremsstrahlung emission when shot into a high-Z converter. These photons could be effectively exploited to perform Photon Activation Analysis (PAA). In the present work, laser-driven PAA is proposed and investigated. We develop a theoretical approach to identify the optimal experimental conditions for laser-driven PAA in a wide range of laser intensities. Lastly, exploiting the Monte Carlo and Particle-In-Cell tools, we successfully simulate PAA experiments performed with both conventional accelerators and laser-driven sources. Under high repetition rate operation (i.e. 1−10 Hz) conditions, the ultra-intense lasers can allow performing PAA with performances comparable with those achieved with conventional accelerators. Moreover, laser-driven PAA could be exploited jointly with complementary laser-driven materials characterization techniques under investigation in existing laser facilities.


  • Open Access

    Integrated quantitative PIXE analysis and EDX spectroscopy using a laser-driven particle source

    by F. Mirani, A. Maffini, F. Casamichiela, A. Pazzaglia, A. Formenti, D. Dellasega, V. Russo, D. Vavassori, D. Bortot, M. Huault, et al.

    A laser-driven particle source is exploited for the elemental and stratigraphic characterization of a nonhomogeneous sample.


  • Open Access

    Integrated quantitative PIXE analysis and EDX spectroscopy using a laser-driven particle source

    by F. Mirani, A. Maffini, F. Casamichiela, A. Pazzaglia, A. Formenti, D. Dellasega, V. Russo, D. Vavassori, D. Bortot, M. Huault, et al.

    Among the existing elemental characterization techniques, Particle Induced X-ray Emission (PIXE) and Energy Dispersive X-ray (EDX) spectroscopy are two of the most widely used in different scientific and technological fields. Here we present the first quantitative laser-driven PIXE and laser-driven EDX experimental investigation performed at the Centro de L\'aseres Pulsados in Salamanca. Thanks to their potential for compactness and portability, laser-driven particle sources are very appealing for materials science applications, especially for materials analysis techniques. We demonstrate the possibility to exploit the X-ray signal produced by the co-irradiation with both electrons and protons to identify the elements in the sample. We show that, using the proton beam only, we can successfully obtain quantitative information about the sample structure through laser-driven PIXE analysis. These results pave the way towards the development of a compact and multi-functional apparatus for the elemental analysis of materials based on a laser-driven particle source.

  • Open Access

    Advanced laser-driven ion sources and their applications in materials and nuclear science

    by Matteo Passoni, Francesca Maria Arioli, Lorenzo Cialfi, David Dellasega, Luca Fedeli, Arianna Formenti, Anna Chiara Giovannelli, Alessandro Maffini, Francesco Mirani, Andrea Pazzaglia, et al.

    The investigation of superintense laser-driven ion sources and their potential applications offers unique opportunities for multidisciplinary research. Plasma physics can be combined with materials and nuclear science, radiation detection and advanced laser technology, leading to novel research challenges of great fundamental and applicative interest. In this paper we present interesting and comprehensive results on nanostructured low density (near-critical) foam targets for TW and PW-class lasers, obtained in the framework of the European Research Council ENSURE project. Numerical simulations and experimental activities carried out at 100 s TW and PW-class laser facilities have shown that targets consisting of a solid foil coated with a nanostructured low-density (near-critical) foam can lead to an enhancement of the ion acceleration process. This stimulated a thorough numerical investigation of superintense laser-interaction with nanostructured near-critical plasmas. Thanks to a deep understanding of the foam growth process via the pulsed laser deposition technique and to the complementary capabilities of high-power impulse magnetron sputtering, advanced multi-layer targets based on near-critical films with carefully controlled properties (e.g. density gradients over few microns length scales) can now be manufactured, with applications outreaching the field of laser-driven ion acceleration. Additionally, comprehensive numerical and theoretical work has allowed the design of dedicated experiments and a realistic table-top apparatus for laser-driven materials irradiation, ion beam analysis and neutron generation, that exploit a double-layer target to reduce the requirements for the laser system.