TLTianjun Liu

Tianjun Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tianjun Liu has a total of 231 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Toward high-performance and stable blue perovskite light-emitting diodes via optimized fluorinated polymer blend hole transport layers

    by Qichun Gu, Tianjun Liu, Yucheng Xu, Xinjuan Li, Yunzhou Deng, Yang Lu, Youcheng Zhang, Zimu Wei, Xinyu Bai, Capucine Mamak, et al.

    Perovskite light-emitting diodes (PeLEDs) are promising low-cost, solution-processable, and color-pure optoelectronic devices for display and lighting applications. However, blue PeLEDs continue to lag their green and red counterparts in terms of luminance and operational lifetime, limiting their practical implementation. The performance disparity primarily arises from charge injection imbalance, which accelerates degradation at the perovskite/hole transport layer (HTL) interface under electrical bias. Here, we design a polymer blend HTL comprising poly( N -vinyl-2,7-difluoro-carbazole) (PVK-F) and poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) (PTAA), in which strengthened van der Waals interactions promote denser molecular packing. This optimized microstructure simultaneously enhances hole mobility and wettability, enabling high-quality perovskite film formation. Consequently, PeLEDs emitting at 485 nanometers achieve an external quantum efficiency of 24.1% and luminance exceeding 26,000 candela per square meter. Moreover, the improved hole injection mitigates interfacial degradation, yielding an operational half-lifetime exceeding 700 minutes at an initial luminance of 100 candela per square meter. This work establishes polymer blending as an effective strategy for advancing the performance and stability of blue PeLEDs.

  • Open Access

    Ultrabright Near-Infrared Lead-Free Perovskite Light-Emitting Diodes with Negligible Efficiency Roll-Off.

    by Tianjun Liu, Qichun Gu, Xinjuan Li, Yunzhou Deng, Zhongzheng Yu, Weidong Xu, Linfeng Pan, Zher Ying Ooi, Yang Lu, Young-Kwang Jung, et al.

    Lead-free halide perovskite semiconductors show great promise for light-emitting diodes (LEDs), benefiting from tunable optoelectronic properties and solution processability. However, their practical applications in high-current-density LEDs are fundamentally constrained by severe efficiency roll-off, primarily caused by nonradiative recombination and carrier-induced structural instabilities. In this study, we introduce a molecular N,N'-diphenylthiourea (DPTA)-engineered tin perovskite semiconductor (CsSnI3) that achieves a photoluminescence quantum efficiency (PLQE) of 36% at a carrier concentration of 1018 cm-3. Our approach enables precise control over the charge-carrier concentration and lattice growth. High-resolution transmission electron microscopy further demonstrates that the uniform local strain distribution in the doped films enhances carrier wave-function overlap, leading to a substantial boost in PLQE. Leveraging the enhanced optoelectronic properties of DPTA-treated CsSnI3, we fabricate near-infrared LEDs that exhibit an external quantum efficiency (EQE) of 13.4% and an unprecedented peak radiance of 1248 W sr-1 m-2, with minimal efficiency roll-off even at high current densities exceeding 3500 mA cm-2 in pulse-mode operation. This work introduces a new material-doping strategy for lead-free perovskites, demonstrating their potential for high-power optoelectronic applications and advancing the feasibility of electrically pumped perovskite laser diodes.

  • Open Access

    Interface-regulated vapour crystallization for ultrapure perovskite LEDs

    by Jian Mao, Qichun Gu, Yunzhou Deng, Milos Dubajic, Thomas A. Selby, Yorrick Boeije, Xinjuan Li, Yang Lu, Zhengkang Qu, Sebastiaan Hoek, et al.

    Achieving ultranarrow spectral linewidth and broad spectral tunability in light-emitting diodes (LEDs) remains challenging due to linewidth broadening from compositional and size heterogeneities. Here we report an interface-regulated vapour crystallization strategy that enables precise control over the spectral linewidth of solution-processed halide perovskite thin films. Underlying materials that exhibit minimal molecular interactions with perovskite precursors, exemplified by poly(9-vinylcarbazole), facilitate smooth ion diffusion and crystallization assisted by dimethylformamide vapour. This mechanism leads to perovskite films with both horizontal and vertical homogeneity and low inhomogeneous broadening comparable to that of perovskite single crystals. We demonstrate perovskite films with ultranarrow photoluminescence linewidths of 13.6 nm, 13.7 nm, 13.8 nm and 14.4 nm for emissions at 464 nm, 474 nm, 483 nm and 522 nm, respectively. This enables us to achieve sky-blue perovskite LEDs with narrow electroluminescence linewidths of 14.7 nm and a peak external quantum efficiency of 24.6%, with comparable linewidths and performance in LEDs spanning the pure blue to pure green. This work offers a practical and scalable strategy to realize narrow spectral linewidth, broad spectral tunability and high performance in thin film LEDs.


  • Open Access

    High-performance red light-emitting diodes from quasi-two-dimensional perovskite nanocrystals

    by Jibin Zhang, Tianjun Liu, Qichun Gu, Shuailing Lin, Jian Mao, Zimu Wei, Meng Wang, Yang Lu, Bo Cai, Zher Ying Ooi, et al.

    Metal halide perovskite light-emitting diodes offer a promising platform for low-cost full-color displays, yet achieving high-performance pure-red emission remains challenging. Here, we report a crystallization regulation strategy for mixed bromide/iodide quasi-two-dimensional perovskites using a multifunctional molecule, 4-(trifluoromethyl)benzenesulfonamide, which simultaneously coordinates with organic spacer cations, Pb 2+ ions and halide ions. Moreover, the combination of large steric hindrance and ordered molecular assembly in the precursor solution plays a decisive role in directing the formation of nanocrystals, thereby suppressing defect formation, inhibiting halide ions migration, and enhancing exciton binding energy. The resulting light-emitting diodes exhibited pure-red emission at ~635 nm, delivering a peak external quantum efficiency of 30.2%, a maximum luminance exceeding 25,000 cd m -2 , and a half-lifetime of 8426 min. Achieving perovskite light-emitting diodes with performance comparable to that of quantum-dot or organic light-emitting diodes would mark a major milestone toward commercialization. This work would expand opportunities beyond conventional light-emitting diode technologies.


  • Top Cited Papers
    Open Access

    Multimodal electron microscopy of halide perovskite interfacial dynamics

    by Xinjuan Li, Qichun Gu, Wei Huang, Simon M. Fairclough, Richard H. Friend, Samuel D. Stranks, Tianjun Liu, Caterina Ducati

    Halide perovskite light-emitting diodes promise high-efficiency 1–3 , low-cost optoelectronics, yet their operational instability remains a critical barrier to practical deployment. Here we develop a multimodal in situ electron microscopy approach that integrates four-dimensional scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and atomic-resolution imaging to directly visualize structural and chemical evolution in a working halide perovskite light-emitting diode with nanometre precision. Our in situ biasing measurements uncover nanoscale structural and chemical transformations initiated at transport layer interfaces, including the formation of metallic lead and lead-rich secondary phases, as well as strain-driven grain fragmentation. On biasing, we observe the partial transformation of the metallic Al contact to insulating AlCl 3 . Crucially, whereas the bulk of the perovskite emitter remains relatively intact, our experiment shows that degradation is localized at interfaces. By comparing in situ and ex situ measurements, these results establish a mechanistic link between interfacial strain, ionic transport and electrochemical reactions in working devices, and provide a broadly applicable framework for nanoscale degradation analysis in complex multilayered optoelectronic systems using multimodal in situ biasing microscopy.


  • Open Access

    Triplets electrically turn on insulating lanthanide-doped nanoparticles

    by Zhongzheng Yu, Yunzhou Deng, Junzhi Ye, Lars van Turnhout, Tianjun Liu, Alasdair Tew, Rakesh Arul, Simon Dowland, Yuqi Sun, Xinjuan Li, et al.

    Insulating nanomaterials have large energy gaps and are only electrically accessible under extreme conditions, such as high-intensity radiation and high temperature, pressure or voltage 1,2 . Lanthanide-doped insulating nanoparticles (LnNPs) are widely studied owing to their exceptional luminescence properties, including bright, narrow-linewidth, non-blinking and non-bleaching emission in the second near-infrared (NIR-II) range 3,4 . However, it has not been possible to electrically generate excited states in these insulating nanomaterials under low biases and, therefore, not possible to fabricate optoelectronic devices from these systems. Here we report an electrical excitation pathway to obtain emission from LnNPs. By forming LnNP@organic molecule nanohybrids, in which the recombination of electrically injected charges on the organic molecule is followed by efficient triplet energy transfer (TET) to the LnNP, it is possible to turn on LnNPs under a low operating bias. We demonstrate this excitation pathway in light-emitting diodes (LEDs), with low turn-on voltages of about 5 V, very narrow electroluminescence (EL) spectra and a peak external quantum efficiency (EQE) greater than 0.6% in the NIR-II window 5 . Our LnNP-based LEDs (LnLEDs) also allow for widely tunable EL properties, by changing the type and concentration of lanthanide dopants. These results open up a new field of hybrid optoelectronic devices and provide new opportunities for the electrically driven excitation sources based on lanthanide nanomaterials for biomedical and optoelectronic applications.


  • Layer-by-layer epitaxial growth of perovskite heterostructures with tunable band offsets

    by Yang Lu, Young-Kwang Jung, Milos Dubajic, Xinjuan Li, Shabnum Maqbool, Qichun Gu, Xinyu Bai, Yorrick Boeije, Xian Wei Chua, Alessandro J. Mirabelli, et al.

    Halide perovskites exhibit superior optoelectronic properties but lack precise thickness and band offset control in heterojunctions, which is critical for modular multilayer architectures such as multiple quantum wells. We demonstrate vapor-phase, layer-by-layer heteroepitaxial growth exemplified by CsPbBr 3 deposition on single crystals of PEA 2 PbBr 4 (PEA: 2-phenylethylammonium). Angstrom-level thickness control and subangstrom smooth layers enable quantum-confined photoluminescence of CsPbBr 3 from monolayer, bilayer, and through to bulk. The interfacial structure controls the electronic structure from a Cs‒PEA-terminated interface (type II heterojunction) to a PEA‒PEA-terminated interface (type I heterojunction), with a layer-tunable band offset shift exceeding 0.5 electron volts. Electron transfer from CsPbBr 3 to PEA 2 PbBr 4 for a type II Cs‒PEA heterojunction results in delayed electron-hole recombination beyond 10 microseconds. Precise quantum confinement control and large band offset tunability unlock perovskite heterojunctions as platforms for scalable, superlattice-based optoelectronic applications.


  • Reducing Inter-grain Gaps to Stabilize the Outdoor Operation of Perovskite Solar Modules

    by Xiangnan Sun, Xin Wang, Jinping Zhang, Peng Xu, Wei Zhang, Zhenhu Zhang, Wenda Shi, Tianjun Liu, Xiaoming Zhao


  • Circularly polarized electroluminescence from light-emitting diodes: mechanisms, materials, and applications

    by Tianjun Liu, Yuqing Huang

    Circularly polarized luminescence (CPL) has gained significant interest in applications ranging from quantum computing and optical communications to data encryption and bioimaging.


  • Open Access

    Resonant Cavity Effect for Spectrally Tunable and Efficient Narrowband Perovskite Photodetectors

    by Zher Ying Ooi, Shenyu Nie, Guadalupe Vega, May Ching Lai, Alberto Jiménez-Solano, Chieh-Szu Huang, Hao Wang, Tianjun Liu, Krzysztof Gałkowski, Michał P. Nowak, et al.

    Narrowband photodetectors with precise spectral control offer significant potential for applications such as color imaging and machine vision. However, existing demonstrations have encountered challenges due to restricted absorption, the need for additional filters, or the inclusion of thick absorbing layers to facilitate charge collection filtering mechanisms. These constraints have resulted in suboptimal detectivity, inadequate color control, or slow response. Here, we exploit cavity resonance enhancement to demonstrate a highly spectral selective and robust perovskite photodetector, showing 2.4-fold EQE enhancement at the main narrowband peak with respect to a broadband photodetector counterpart of the same perovskite thickness. This device architecture achieves peak external quantum efficiency of 80%, responsivity of 0.41 A W–1, and detectivity of 3.7 × 1011 Jones at the main narrowband peak, with a secondary signal below 450 nm that can be mitigated with advanced photonic crystal as proposed. Additionally, the resonant cavity-enhanced photodetector offers a rapid switching of 0.9 μs and low noise of 0.57 pW Hz–1/2. Our demonstration shows precise tuning of the main narrowband photodetection characteristics across a 100 nm spectral range by simply varying the thickness of the perovskite layer, ensuring device efficiency and stability across the wavelength region around 560 to 660 nm, where most perovskite devices suffer from degradation due to halide segregation. This work demonstrates the practical integration of resonant cavity enhancement in perovskite photodetectors and paves the way for high-performance optical sensing, multispectral imaging, and wavelength-selective photonic devices.