Lijia Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lijia Zhu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Guangli Yang
Shanghai Institute for Advanced Communication and Data Science, Shanghai University, Shanghai, China
3 shared publications - Yong Luo
Shanghai Key Laboratory of Chips and Systems for Intelligent Connected Vehicle, School of Communication and Information Engineering, Shanghai University, Shanghai, China
2 shared publications - Bin Xu
Qualcomm, San Diego, 92122, USA
1 shared publication - Fan Li
Shanghai Institute for Advanced Communication and Data Science (SICS), School of Communication and Information Engineering, Shanghai University, Shanghai 200444 China
1 shared publication - Hao Jin
Guangxi University of Science and Technology, Liuzhou, China
1 shared publication - Hongwei Wang
Capital University of Physical Education and Sports,Beijing,China,100191
1 shared publication
Latest Publications
- Open Access
- 13 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 7672-7681
A Wideband Dual-Polarized Antenna and its Array With Electrically Downtilt Function for 5G Sub-6 GHz Communication Applications
A wideband dual-polarized antenna is proposed for 4G and 5G communication applications. The antenna element consists of a pair of opened-loop dipoles for dual-polarization and its three inherent resonant modes are shifted closer to form a wide bandwidth. With additional U-shaped slots etched around the feed point, the input impedance of the antenna element is matched to 50 Ohm. The fabricated antenna element operates from 1.8 to 4.0 GHz, having 75.9% (VSWR ≤ 2) impedance bandwidth and high port-toport isolation (> 25 dB). It also achieves a 67±1° beamwidth in H-plane and 68.7 ± 3.3° in V-plane with 8.5 ± 1 dBi gain across the supported bands. By using six antenna elements and designing RF phase shifting module (RFPSM) based on vector modulators, a six-element dual-polarized array with electrically downtilt is also fabricated and measured, realizing a peak gain of 16.8 dBi, a similar beamwidth in H-plane as single antenna element and an electrically downtilt in V-plane from 0° to 12° which is preferred in communication applications. This antenna array could be used for future 5G communication and other applications.
- 13 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 7672-7681
Open AccessA Wideband Dual-Polarized Antenna and its Array With Electrically Downtilt Function for 5G Sub-6 GHz Communication Applications
A wideband dual-polarized antenna is proposed for 4G and 5G communication applications. The antenna element consists of a pair of opened-loop dipoles for dual-polarization and its three inherent resonant modes are shifted closer to form a wide bandwidth. With additional U-shaped slots etched around the feed point, the input impedance of the antenna element is matched to 50 Ohm. The fabricated antenna element operates from 1.8 to 4.0 GHz, having 75.9% (VSWR ≤ 2) impedance bandwidth and high port-toport isolation (> 25 dB). It also achieves a 67±1° beamwidth in H-plane and 68.7 ± 3.3° in V-plane with 8.5 ± 1 dBi gain across the supported bands. By using six antenna elements and designing RF phase shifting module (RFPSM) based on vector modulators, a six-element dual-polarized array with electrically downtilt is also fabricated and measured, realizing a peak gain of 16.8 dBi, a similar beamwidth in H-plane as single antenna element and an electrically downtilt in V-plane from 0° to 12° which is preferred in communication applications. This antenna array could be used for future 5G communication and other applications.
- Open Access
- 18 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 171684-171690
A Wide-Angle Beam Scanning Antenna in E-plane for K-band Radar Sensor
In this paper, a K-band antenna with ±60° beam scanning is proposed for a mmWave (millimeter-Wave) radar sensor. Especially, we take advantages of the magnetic dipole principle, and design the antenna by employing via holes in three sides, so as to form a cavity which can be equivalently considered as magnetic dipole, resulting in the 3 dB beam width as wide as 140° in E-plane. We cascade the mmWave antenna to 4×1 and 4×4 arrays for radar transmitting and receiving, respectively. The antenna array is fabricated and implemented to a K-band radar and its wide-angle beam scanning performance is evaluated by the radar’s distance and angular detections.
- 18 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 171684-171690
Open AccessA Wide-Angle Beam Scanning Antenna in E-plane for K-band Radar Sensor
In this paper, a K-band antenna with ±60° beam scanning is proposed for a mmWave (millimeter-Wave) radar sensor. Especially, we take advantages of the magnetic dipole principle, and design the antenna by employing via holes in three sides, so as to form a cavity which can be equivalently considered as magnetic dipole, resulting in the 3 dB beam width as wide as 140° in E-plane. We cascade the mmWave antenna to 4×1 and 4×4 arrays for radar transmitting and receiving, respectively. The antenna array is fabricated and implemented to a K-band radar and its wide-angle beam scanning performance is evaluated by the radar’s distance and angular detections.
- 26 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (4) , 534-537
A Compact, Scanning Tightly Coupled Dipole Array With Parasitic Strips for Next-Generation Wireless Applications
A wideband one-dimensional (1-D) Tightly Coupled Dipole Array (TCDA) with enhanced impedance matching is presented in this paper, which consists of eight printed dipole units, a coplanar waveguide with ground (CPWG) feeding network and two rows of parasitic strips. The feed structure is simple and small with good ports isolation. A 1-8 prototype was fabricated and tested. A four-channel phase-amplitude control board was designed to validate the beam-steering function of the proposed TCDA. This array has a height of only 0.176$low$, it exhibits a measured 10-dB return loss operating bandwidth of 92.7% from 2.2 to 6.0 GHz for the scan angle up to 45° broadside radiation. The cross-polarization suppression level is better than 15 dB in the whole scanning range. This antenna array can be applied in the future massive MIMO beamforming systems for 5G and other applications.
- 26 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (4) , 534-537
A Compact, Scanning Tightly Coupled Dipole Array With Parasitic Strips for Next-Generation Wireless Applications
A wideband one-dimensional (1-D) Tightly Coupled Dipole Array (TCDA) with enhanced impedance matching is presented in this paper, which consists of eight printed dipole units, a coplanar waveguide with ground (CPWG) feeding network and two rows of parasitic strips. The feed structure is simple and small with good ports isolation. A 1-8 prototype was fabricated and tested. A four-channel phase-amplitude control board was designed to validate the beam-steering function of the proposed TCDA. This array has a height of only 0.176$low$, it exhibits a measured 10-dB return loss operating bandwidth of 92.7% from 2.2 to 6.0 GHz for the scan angle up to 45° broadside radiation. The cross-polarization suppression level is better than 15 dB in the whole scanning range. This antenna array can be applied in the future massive MIMO beamforming systems for 5G and other applications.