Yogendra Nath Chouryal
Research Subjects
Yogendra Nath Chouryal has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Pushpal Ghosh
School of Chemical Science and Technology Department of Chemistry Dr. Harisingh Gour University (a Central University) Sagar Madhya Pradesh India
8 shared publications - Rahul Kumar Sharma
School of Chemical Science and Technology Department of Chemistry Dr. Harisingh Gour University (a Central University) Sagar Madhya Pradesh India
8 shared publications - Archna Pandey
Department of Chemistry, Dr. Harisingh Gour Vishwavidyalaya, Sagar, 470003, Madhya Pradesh, India
2 shared publications Jeganathan Saravanakumar
Department of Chemistry Dr. Harisingh Gour University (A Central University) Sagar-470003, M.P. India
2 shared publications- Konstantin V. Ivanovskikh
Institute of Physics and Technology, Ural Federal University, Ekaterinburg 620002, Russia
2 shared publications Sandeep Nigam
Chemistry Division, Bhabha Atomic Research Centre, Trombay, MUMBAI-400085, INDIA
2 shared publications
Latest Publications
- 8 December 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (3) , 1463-1473
Temperature dependent quantum cutting in cubic BaGdF5:Eu3+ nanophosphors
A task-specific ionic liquid (IL) is employed as a structure directing agent for the synthesis of quantum cutting BaGdF5:Eu3+ nanophosphors.
- 8 December 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (3) , 1463-1473
Temperature dependent quantum cutting in cubic BaGdF5:Eu3+ nanophosphors
A task-specific ionic liquid (IL) is employed as a structure directing agent for the synthesis of quantum cutting BaGdF5:Eu3+ nanophosphors.
- 14 October 2020
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 8 (23) , 6730-6740
The nano-bio interactions of rare-earth doped BaF2 nanophosphors shape the developmental processes of zebrafish
Nanoparticles with biomedical applications should be evaluated for their biocompatibility. Rare-earth doped nanoparticles with unique spectral properties are superior in vivo optical probes in comparison with quantum dots and organic dyes, however, studies describing their nano-bio interactions are still limited. Here, we have evaluated the nano-bio interactions of green-synthesized, phase-pure BaF2 nanoparticles doped with rare-earth (RE3+ = Ce3+/Tb3+) ions using larval zebrafish. We found that zebrafish can tolerate a wide concentration range of these nanoparticles, as the maximal lethality was observed at very high concentrations (more than 200 mg L−1) upon five days of continuous exposure. At a concentration of 10 mg L−1, at which Zn2+, Ti4+ and Ag+ nanoparticles are reported to be lethal to developing zebrafish, continuous exposure to our nanoparticles for four days produced no developmental anomalies, craniofacial defects, cardiac toxicity or behavioural abnormalities in the developing zebrafish larvae. We have also found that the doping of rare-earth ions has no major effect on these biomarkers. Interestingly, the function of acetylcholinesterase (AChE) and the cellular metabolic activity of whole zebrafish larvae remained unchanged, even during continuous exposure to these nanoparticles at 150 mg L−1 for four days; however, severe developmental toxicities were evident at this high concentration. Based on these results, we can conclude that the biocompatibility of rare-earth doped nanoparticles is concentration dependent. Not all biomarkers are sensitive to these nanoparticles. The high concentration-dependent toxicity occurs through a mechanism distinct from changes in the metabolic or AChE activity. The significance of these findings lies in using these nanoparticles for bioimaging applications and biomarker studies, especially for prolonged exposure times.
- 14 October 2020
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 8 (23) , 6730-6740
The nano-bio interactions of rare-earth doped BaF2 nanophosphors shape the developmental processes of zebrafish
Nanoparticles with biomedical applications should be evaluated for their biocompatibility. Rare-earth doped nanoparticles with unique spectral properties are superior in vivo optical probes in comparison with quantum dots and organic dyes, however, studies describing their nano-bio interactions are still limited. Here, we have evaluated the nano-bio interactions of green-synthesized, phase-pure BaF2 nanoparticles doped with rare-earth (RE3+ = Ce3+/Tb3+) ions using larval zebrafish. We found that zebrafish can tolerate a wide concentration range of these nanoparticles, as the maximal lethality was observed at very high concentrations (more than 200 mg L−1) upon five days of continuous exposure. At a concentration of 10 mg L−1, at which Zn2+, Ti4+ and Ag+ nanoparticles are reported to be lethal to developing zebrafish, continuous exposure to our nanoparticles for four days produced no developmental anomalies, craniofacial defects, cardiac toxicity or behavioural abnormalities in the developing zebrafish larvae. We have also found that the doping of rare-earth ions has no major effect on these biomarkers. Interestingly, the function of acetylcholinesterase (AChE) and the cellular metabolic activity of whole zebrafish larvae remained unchanged, even during continuous exposure to these nanoparticles at 150 mg L−1 for four days; however, severe developmental toxicities were evident at this high concentration. Based on these results, we can conclude that the biocompatibility of rare-earth doped nanoparticles is concentration dependent. Not all biomarkers are sensitive to these nanoparticles. The high concentration-dependent toxicity occurs through a mechanism distinct from changes in the metabolic or AChE activity. The significance of these findings lies in using these nanoparticles for bioimaging applications and biomarker studies, especially for prolonged exposure times.
- 25 November 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (1) , 200-209
A closer look at the defects and luminescence of nanocrystalline fluorides synthesized via ionic liquids: the case of Ce3+-doped BaF2
Phase pure BaF2 doped with Ce3+ (0.1%) nanocrystals are synthesized using an ionic liquid (IL) ([C4mim][BF4]) assisted solvothermal method where the IL is not only used as a reaction medium and a capping agent, but also as a reaction partner.
- 25 November 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (1) , 200-209
A closer look at the defects and luminescence of nanocrystalline fluorides synthesized via ionic liquids: the case of Ce3+-doped BaF2
Phase pure BaF2 doped with Ce3+ (0.1%) nanocrystals are synthesized using an ionic liquid (IL) ([C4mim][BF4]) assisted solvothermal method where the IL is not only used as a reaction medium and a capping agent, but also as a reaction partner.
- 1 September 2019
- Published by Springer Nature in Journal of Chemical Sciences
- Vol. 131 (9) , 93
Influence of ionic liquids and concentration of red phosphorous on luminescent Cu3P nanocrystals
- 1 September 2019
- Published by Springer Nature in Journal of Chemical Sciences
- Vol. 131 (9) , 93
Influence of ionic liquids and concentration of red phosphorous on luminescent Cu3P nanocrystals
- 9 January 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (2) , 927-936
Eu-Doped BaF2 Nanoparticles for Bioimaging Applications
- 9 January 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (2) , 927-936
Eu-Doped BaF2 Nanoparticles for Bioimaging Applications
- 26 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8171-8182
Tuning the Crystal Phase and Morphology of the Photoluminescent Indium Sulphide Nanocrystals and Their Adsorption‐Based Catalytic and Photocatalytic Applications
Phase pure quantum confined In 2 S 3 nanocrystals with high catalytic/photocatalytic efficiency are accessible solvothermally using task specific ionic liquid (IL) as structure directing agent and thiourea as sulphur source. Selective tuning of the shape, morphology and most importantly purity of the nanomaterials are controlled by changing the reaction time, IL and specially sulphur concentration. For instances, at 150 o C, when IL is used cubic phase is obtained; however in absence of IL, tetragonal phase with bigger crystallite size appears. In most of the cases In(OH) 3 is coming as an impurity; however pure In 2 S 3 with highest catalytic efficiency and band gap of 2.23 eV is achieved when 18 times sulphur concentration is used keeping other reaction parameters same. Photoluminescence emission spectra show that quantum confined pure In 2 S 3 nanoparticles are blue emitting material. Furthermore, pure In 2 S 3 nanoparticles are used for degradation of both cationic [crystal violet, methylene blue, rhodamine B] and anionic organic dyes [methyl orange]. Rate and overall catalytic efficiency are found highest for crystal violet (91%) followed by methylene blue (77%), rhodamine B (44.7%) and least for methyl orange (15.29%). Analysis reveals that along with electrostatic interaction, molecular structures of dye molecules have also significant impact on adsorption capacity which finally governs the catalytic (even in the dark) and photocatalytic efficiency of nanocrystals.
- 26 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8171-8182
Tuning the Crystal Phase and Morphology of the Photoluminescent Indium Sulphide Nanocrystals and Their Adsorption‐Based Catalytic and Photocatalytic Applications
Phase pure quantum confined In 2 S 3 nanocrystals with high catalytic/photocatalytic efficiency are accessible solvothermally using task specific ionic liquid (IL) as structure directing agent and thiourea as sulphur source. Selective tuning of the shape, morphology and most importantly purity of the nanomaterials are controlled by changing the reaction time, IL and specially sulphur concentration. For instances, at 150 o C, when IL is used cubic phase is obtained; however in absence of IL, tetragonal phase with bigger crystallite size appears. In most of the cases In(OH) 3 is coming as an impurity; however pure In 2 S 3 with highest catalytic efficiency and band gap of 2.23 eV is achieved when 18 times sulphur concentration is used keeping other reaction parameters same. Photoluminescence emission spectra show that quantum confined pure In 2 S 3 nanoparticles are blue emitting material. Furthermore, pure In 2 S 3 nanoparticles are used for degradation of both cationic [crystal violet, methylene blue, rhodamine B] and anionic organic dyes [methyl orange]. Rate and overall catalytic efficiency are found highest for crystal violet (91%) followed by methylene blue (77%), rhodamine B (44.7%) and least for methyl orange (15.29%). Analysis reveals that along with electrostatic interaction, molecular structures of dye molecules have also significant impact on adsorption capacity which finally governs the catalytic (even in the dark) and photocatalytic efficiency of nanocrystals.
- Open Access
- 3 July 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (53) , 33467-33476
Size of the rare-earth ions: a key factor in phase tuning and morphology control of binary and ternary rare-earth fluoride materials
In an ionic liquid assisted solvothermal synthesis developed by us for the synthesis of rare-earth (RE) fluorides, it is possible to control the product formation by the choice of the rare earth ion. For rare-earth cations with smaller ionic radii (below 1.075 Å), cubic NaREF4 with a spherical morphology is obtained, whilst for rare-earth cations with radii between 1.08 Å and 1.13 Å, the formation of hexagonal NaREF4 with a nanorod-like morphology is observed. For rare earth ions with a larger radius than that of La3+ (1.216 Å), instead of ternary fluorides, binary fluorides REF3 in the trigonal modification is obtained. The growth mechanism behind this morphology change is explained from atomistic origin using electron microscope studies. The lattice strain changes with the rare-earth fluoride phase. For cubic NaREF4 a tensile strain is observed, whilst for the hexagonal and trigonal binary fluoride a compressive strain is observed. The optical properties of the obtained materials promises use for various optoelectronic applications.
- 3 July 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (53) , 33467-33476
Open AccessSize of the rare-earth ions: a key factor in phase tuning and morphology control of binary and ternary rare-earth fluoride materials
In an ionic liquid assisted solvothermal synthesis developed by us for the synthesis of rare-earth (RE) fluorides, it is possible to control the product formation by the choice of the rare earth ion. For rare-earth cations with smaller ionic radii (below 1.075 Å), cubic NaREF4 with a spherical morphology is obtained, whilst for rare-earth cations with radii between 1.08 Å and 1.13 Å, the formation of hexagonal NaREF4 with a nanorod-like morphology is observed. For rare earth ions with a larger radius than that of La3+ (1.216 Å), instead of ternary fluorides, binary fluorides REF3 in the trigonal modification is obtained. The growth mechanism behind this morphology change is explained from atomistic origin using electron microscope studies. The lattice strain changes with the rare-earth fluoride phase. For cubic NaREF4 a tensile strain is observed, whilst for the hexagonal and trigonal binary fluoride a compressive strain is observed. The optical properties of the obtained materials promises use for various optoelectronic applications.
- 27 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (13) , 11651-11661
Adsorption-Driven Catalytic and Photocatalytic Activity of Phase Tuned In2S3 Nanocrystals Synthesized via Ionic Liquids
Phase tuned quantum confined In2S3 nanocrystals are accessible solvothermally using task-specific ionic liquids (ILs) as structure directing agents. Selective tuning of size, shape, morphology, and, most importantly, crystal phase of In2S3 is achieved by changing the alkyl side chain length, the H-bonding, and aromatic π-stacking ability of the 1-alkyl-3- methylimidazolium bromide ILs, [Cnmim]Br (n = 2, 4, 6, 8, and 10). It is observed that crystallite size is significantly less when ILs are used compared to the synthesis without ILs keeping the other reaction parameters the same. At 150 °C, when no IL is used, pure tetragonal form of β-In2S3 appears however in the presence of [Cnmim]Br [n = 2,4], at the same reaction condition, a pure cubic phase crystallizes. However, in case of methylimidazolium bromides with longer pendant alkyl chains such as hexyl (C6), octyl (C8) or decyl (C10), nanoparticles of the tetragonal polymorph form. Likewise, judicious choice of reaction temperature and precursors has a profound effect to obtain phase pure and morphology controlled nanocrystals. Furthermore, the adsorption driven catalytic and photocatalytic activity of as-prepared nanosized indium sulfide is confirmed by studying the degradation of crystal violet (CV) dye in the presence of dark and visible light. A maximum of 94.8% catalytic efficiency is obtained for the In2S3 nanocrystals using tetramethylammonium bromide (TMAB) ionic liquid.
- 27 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (13) , 11651-11661
Adsorption-Driven Catalytic and Photocatalytic Activity of Phase Tuned In2S3 Nanocrystals Synthesized via Ionic Liquids
Phase tuned quantum confined In2S3 nanocrystals are accessible solvothermally using task-specific ionic liquids (ILs) as structure directing agents. Selective tuning of size, shape, morphology, and, most importantly, crystal phase of In2S3 is achieved by changing the alkyl side chain length, the H-bonding, and aromatic π-stacking ability of the 1-alkyl-3- methylimidazolium bromide ILs, [Cnmim]Br (n = 2, 4, 6, 8, and 10). It is observed that crystallite size is significantly less when ILs are used compared to the synthesis without ILs keeping the other reaction parameters the same. At 150 °C, when no IL is used, pure tetragonal form of β-In2S3 appears however in the presence of [Cnmim]Br [n = 2,4], at the same reaction condition, a pure cubic phase crystallizes. However, in case of methylimidazolium bromides with longer pendant alkyl chains such as hexyl (C6), octyl (C8) or decyl (C10), nanoparticles of the tetragonal polymorph form. Likewise, judicious choice of reaction temperature and precursors has a profound effect to obtain phase pure and morphology controlled nanocrystals. Furthermore, the adsorption driven catalytic and photocatalytic activity of as-prepared nanosized indium sulfide is confirmed by studying the degradation of crystal violet (CV) dye in the presence of dark and visible light. A maximum of 94.8% catalytic efficiency is obtained for the In2S3 nanocrystals using tetramethylammonium bromide (TMAB) ionic liquid.