Michelle Pereira Babisk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michelle Pereira Babisk has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Mônica Castoldi Borlini Gadioli
Ministry of Development, Industry, Commerce and Services—MDIC, Esplanada dos Ministérios, Brasília 70053-900, DF, Brazil
4 shared publications - Carlos Maurício Fontes Vieira
Universidade Estadual do Norte Fluminense Darcy Ribeiro, Brasil
3 shared publications - Mariane Costalonga de Aguiar
Centre for Mineral Technology—CETEM, Cachoeiro de Itapemirim 29311-970, ES, Brazil
2 shared publications - Daina Bourguignon Campos De Oliveira1 shared publication
- Diego Borges Tabelini1 shared publication
- Ednilson Silva Felipe
Universidade Federal do Espírito Santo, Pró-reitoria de Extensão, Vitória, ES, Brasil
1 shared publication
Latest Publications
- Open Access
- 18 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (3) , e04423
Development of Lead Crystal Glasses Using Ornamental Stone Waste
Purpose: The objective of this work was to develop and characterize lead crystal glasses from the use of silicate wastes from ornamental stones. Theoretical framework: Glass consumption has shown considerable growth for the economy. It is predominantly used for windows and facades in modern buildings, for many practical reasons, including thermal, energy, lighting and aesthetics. The state of Espírito Santo is one of the largest producers and exporters of ornamental stones in the country. This sector is responsible for generating a large amount of waste around the world. This waste is deposited daily in ornamental stone landfills and is rich in oxides that can be used as raw materials in the manufacture of glass. Brazil generates around 2.5 million tons of fine waste per year, with the state of Espírito Santo responsible for 2 million tons. Method/design/approach: The methodology used was melting/cooling using alumina crucibles. The maximum process temperature was 1500°C with a time of 3 hours. Glass was developed using granite and quartzite residue. After melting/cooling, the glasses were cooled by the inertia of the oven and unmolded for characterization. Results and conclusion: The results showed that the glasses developed with waste showed characteristics similar to commercial glasses of the same type. X-ray diffractions (XRD) showed complete vitrification of the glasses produced. There is technical feasibility for developing glass using ornamental stone waste. Research implications: Enable initiatives that aim to develop glass using ornamental stone waste, with the aim of promoting a significant reduction in effects on the environment without compromising the sector's production pace. Originality/value: Develop lead glass, of the crystal type, and certify its technological feasibility by comparing the results obtained with commercial lead crystal glass.
- 18 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (3) , e04423
Open AccessDevelopment of Lead Crystal Glasses Using Ornamental Stone Waste
Purpose: The objective of this work was to develop and characterize lead crystal glasses from the use of silicate wastes from ornamental stones. Theoretical framework: Glass consumption has shown considerable growth for the economy. It is predominantly used for windows and facades in modern buildings, for many practical reasons, including thermal, energy, lighting and aesthetics. The state of Espírito Santo is one of the largest producers and exporters of ornamental stones in the country. This sector is responsible for generating a large amount of waste around the world. This waste is deposited daily in ornamental stone landfills and is rich in oxides that can be used as raw materials in the manufacture of glass. Brazil generates around 2.5 million tons of fine waste per year, with the state of Espírito Santo responsible for 2 million tons. Method/design/approach: The methodology used was melting/cooling using alumina crucibles. The maximum process temperature was 1500°C with a time of 3 hours. Glass was developed using granite and quartzite residue. After melting/cooling, the glasses were cooled by the inertia of the oven and unmolded for characterization. Results and conclusion: The results showed that the glasses developed with waste showed characteristics similar to commercial glasses of the same type. X-ray diffractions (XRD) showed complete vitrification of the glasses produced. There is technical feasibility for developing glass using ornamental stone waste. Research implications: Enable initiatives that aim to develop glass using ornamental stone waste, with the aim of promoting a significant reduction in effects on the environment without compromising the sector's production pace. Originality/value: Develop lead glass, of the crystal type, and certify its technological feasibility by comparing the results obtained with commercial lead crystal glass.
- Open Access
- 17 November 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (2) , e04310
Foam Glass Synthesized Exclusively from Wastes
Purpose: The objective of this research was to synthesize and characterize foams glass using glass waste as a glass matrix and marble waste as a foaming agent. Theoretical framework: Foams glass are examples of very porous materials, the result of the insertion of a gaseous phase into a solid phase and are mostly used as thermal and acoustic insulators. Foam glass are obtained by adding a foaming agent to finely ground glass and heating it to temperatures above its softening point. Ornamental stones are basically subdivided into granites and marbles. Carbonate stone are generally included as marbles. The processing of these stones generates large amounts of fine waste. Brazil generates around 2.5 million tons of stone waste per year. Marble waste has great potential to be used as a foaming agent in the synthesis of foams glass. Method/design/approach: The glass and marble wastes were characterized by chemical, mineralogical, granulometric, thermal and morphological analysis. Foams glass were synthesized with 3, 6, 9 and 12% by mass of marble waste in mass of glass waste, fired at temperatures of 750, 800, 850 and 900°C. The characterization of the foam glass was carried out through analysis of volumetric expansion, density, porosity, and the microstructure evaluated by microscopy. Results and conclusion: The waste characterization results proved that they are capable of synthesizing foams glass for the desired purposes, glass waste as a glass matrix and marble waste as a foaming agent. The synthesized foam glass showed excellent volumetric expansion with density and porosity values compatible with those of commercial foam glass. Research implications: The use of wastes as raw material in the production of foams glass, thus aiming to reduce the consumption of natural resources, as well as reducing the environmental impact caused by wastes. Originality/value: Synthesize foams glass exclusively with wastes. It is also one of the waste of ornamental stone, generated in the order of millions of tons.
- 17 November 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (2) , e04310
Open AccessFoam Glass Synthesized Exclusively from Wastes
Purpose: The objective of this research was to synthesize and characterize foams glass using glass waste as a glass matrix and marble waste as a foaming agent. Theoretical framework: Foams glass are examples of very porous materials, the result of the insertion of a gaseous phase into a solid phase and are mostly used as thermal and acoustic insulators. Foam glass are obtained by adding a foaming agent to finely ground glass and heating it to temperatures above its softening point. Ornamental stones are basically subdivided into granites and marbles. Carbonate stone are generally included as marbles. The processing of these stones generates large amounts of fine waste. Brazil generates around 2.5 million tons of stone waste per year. Marble waste has great potential to be used as a foaming agent in the synthesis of foams glass. Method/design/approach: The glass and marble wastes were characterized by chemical, mineralogical, granulometric, thermal and morphological analysis. Foams glass were synthesized with 3, 6, 9 and 12% by mass of marble waste in mass of glass waste, fired at temperatures of 750, 800, 850 and 900°C. The characterization of the foam glass was carried out through analysis of volumetric expansion, density, porosity, and the microstructure evaluated by microscopy. Results and conclusion: The waste characterization results proved that they are capable of synthesizing foams glass for the desired purposes, glass waste as a glass matrix and marble waste as a foaming agent. The synthesized foam glass showed excellent volumetric expansion with density and porosity values compatible with those of commercial foam glass. Research implications: The use of wastes as raw material in the production of foams glass, thus aiming to reduce the consumption of natural resources, as well as reducing the environmental impact caused by wastes. Originality/value: Synthesize foams glass exclusively with wastes. It is also one of the waste of ornamental stone, generated in the order of millions of tons.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Evaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
The clay samples endure the incorporation of industrial and urban wastes, which do not cause large variations in their properties if added in controlled quantities. Wastes can be classified as fuel, fluxing and property affecting wastes. The fuel wastes usually have a high amount of organic matter, that when heated cause exothermic reactions, releasing heat to the process. The fluxing wastes cause a reduction in the ceramic melting points. The main aim of this work was to study the behavior of ceramics incorporated with fuel wastes (Eichhornia crassipes dry biomass) and fluxing wastes (granite) as well as blends of both wastes. Different compositions were prepared with incorporation of different percentages of these wastes in the clay samples, conformed by uniaxial pressing and fired at 550, 650, 750, 850, 950 e 1050ºC. The technological properties tested were: dry apparent density, linear shrinkage, water absorption and flexural rupture strength. Results indicate that the high calorific value of the biomass waste represents a great possibility of saving energy for the firing process. Incorporations can be indicated as a possibility of correct destination for the investigated wastes.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Open AccessEvaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
The clay samples endure the incorporation of industrial and urban wastes, which do not cause large variations in their properties if added in controlled quantities. Wastes can be classified as fuel, fluxing and property affecting wastes. The fuel wastes usually have a high amount of organic matter, that when heated cause exothermic reactions, releasing heat to the process. The fluxing wastes cause a reduction in the ceramic melting points. The main aim of this work was to study the behavior of ceramics incorporated with fuel wastes (Eichhornia crassipes dry biomass) and fluxing wastes (granite) as well as blends of both wastes. Different compositions were prepared with incorporation of different percentages of these wastes in the clay samples, conformed by uniaxial pressing and fired at 550, 650, 750, 850, 950 e 1050ºC. The technological properties tested were: dry apparent density, linear shrinkage, water absorption and flexural rupture strength. Results indicate that the high calorific value of the biomass waste represents a great possibility of saving energy for the firing process. Incorporations can be indicated as a possibility of correct destination for the investigated wastes.
- Open Access
- 29 January 2013
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia do Rio Grande do Norte (IFRN) in HOLOS
- Vol. 6, 169-177
INCORPORAÇÃO DE RESÍDUO DE QUARTZITOS EM CERÂMICA VERMELHA
A incorporação de resíduos industriais em cerâmica vermelha vem sendo muito utilizada atualmente na busca de matérias-primas alternativas, e também buscando uma destinação ambientalmente correta aos resíduos. Durante os processos de beneficiamento das rochas ornamentais, há perdas significativas de material e geração de resíduos, os quais muitas vezes são dispostos de forma inadequada na natureza, sem previsão de utilização ou reuso. A indústria de extração e beneficiamento de quartzito do município de Várzea, região de Seridó, na Paraíba, gera cerca de 20 mil kg de resíduos por dia. O quartzito é classificado geologicamente como uma rocha metamórfica, composto quase que inteiramente de grãos de quartzo. O objetivo desse trabalho é caracterizar e avaliar os efeitos da incorporação do resíduo de quartzito em cerâmica vermelha. Foram estudadas incorporações de até 40% em peso de resíduo em massa cerâmica, preparados corpos de prova retangulares por prensagem uniaxial a 20 MPa e queimados a 800ºC. A caracterização das matérias primas foi realizada por meio de análise química por fluorescência de raios-X e análise de fases cristalinas por difração de raios-X. As propriedades físicas e mecânicas determinadas de interesse para a cerâmica vermelha foram: densidade aparente, absorção de água, retração linear e tensão de ruptura à flexão. A microestrutura foi avaliada por microscopia eletrônica de varredura. Os resultados indicaram que o resíduo de quartzito é um material com potencial para ser utilizado como componente na massa de cerâmica vermelha.
- 29 January 2013
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia do Rio Grande do Norte (IFRN) in HOLOS
- Vol. 6, 169-177
Open AccessINCORPORAÇÃO DE RESÍDUO DE QUARTZITOS EM CERÂMICA VERMELHA
A incorporação de resíduos industriais em cerâmica vermelha vem sendo muito utilizada atualmente na busca de matérias-primas alternativas, e também buscando uma destinação ambientalmente correta aos resíduos. Durante os processos de beneficiamento das rochas ornamentais, há perdas significativas de material e geração de resíduos, os quais muitas vezes são dispostos de forma inadequada na natureza, sem previsão de utilização ou reuso. A indústria de extração e beneficiamento de quartzito do município de Várzea, região de Seridó, na Paraíba, gera cerca de 20 mil kg de resíduos por dia. O quartzito é classificado geologicamente como uma rocha metamórfica, composto quase que inteiramente de grãos de quartzo. O objetivo desse trabalho é caracterizar e avaliar os efeitos da incorporação do resíduo de quartzito em cerâmica vermelha. Foram estudadas incorporações de até 40% em peso de resíduo em massa cerâmica, preparados corpos de prova retangulares por prensagem uniaxial a 20 MPa e queimados a 800ºC. A caracterização das matérias primas foi realizada por meio de análise química por fluorescência de raios-X e análise de fases cristalinas por difração de raios-X. As propriedades físicas e mecânicas determinadas de interesse para a cerâmica vermelha foram: densidade aparente, absorção de água, retração linear e tensão de ruptura à flexão. A microestrutura foi avaliada por microscopia eletrônica de varredura. Os resultados indicaram que o resíduo de quartzito é um material com potencial para ser utilizado como componente na massa de cerâmica vermelha.