YJYongjun Jang

Yongjun Jang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yongjun Jang has a total of 80 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Structural and functional benchmarking of monolayer- and bioreactor-generated hiPSC-derived cardiomyocytes

    by Yongjun Jang, Kevin Shani, Anna Clouvel-Gervaiseau, Maksymilian Prondzynski, Simone Nuebling, Christopher J. Shin, Yichong Wang, Giulio Ciucci, Michio Kawai, Yoonseo Lee, et al.

    Transitioning from animal to human cell sources represents a critical milestone in cardiac tissue engineering and biomedical research. Neonatal rat ventricular myocytes (NRVMs) have long served as the functional benchmark for engineered cardiac tissues; however, their rodent origin limits clinical relevance. Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) offer a renewable, species-specific alternative but remain restricted by immature structure and function, small-scale yield, and high batch variability by conventional two-dimensional monolayer (2D-Mono) differentiation. Here, we systematically evaluated hiPSC-CMs generated by 2D-Mono and three-dimensional embryoid-body (3D-EB) differentiation using identical 15-day Wnt-modulated protocols without additional maturation steps. The 3D-EB method yielded 181 × 106 cells per 100 ml, approximately 2.7-fold higher than the 2D-Mono, while maintaining >80% cTnT+ purity and reduced batch variability. Structural analyses revealed improved sarcomeric organization in 3D-EB tissues compared with 2D-Mono, although both remained less organized than NRVMs, while other morphological parameters were comparable between groups. Functionally, 3D-EB tissues exhibited faster calcium conduction (33.7 cm/s), indicating enhanced electrical coupling relative to 2D-Mono. Although contractile performance remained similar between differentiation formats and below NRVM levels, 3D-EB tissues exhibited consistent structural and functional improvement in calcium wave velocity and contractility over time. These results show that, even without external maturation cues, 3D-EB differentiation yields reproducible, scalable, and human-relevant cardiomyocytes.


  • Open Access

    Rapid functional classification of cardiac genetic variants directly informs precision cardiology

    by Xiao-Ting Wang, Po-Ta Chen, Joshua Mayourian, Leona Ripple, Yashasvi Tharani, Tiantian Shang, Nikoleta Pavlaki, Kevin Shani, Yongjun Jang, Christopher M. Janson, et al.

    Large-scale clinical genome sequencing yields vast numbers of variants of unknown significance (VUSs). The high frequency of VUSs and the paucity of platforms to characterize their functional impact pose significant challenges for clinical decision making. Here, we present an integrated end-to-end platform, REVi-SCOPE (Rapid evaluation of variants in single cells by optogenetics and prime editing), for characterization of the impact of VUSs on cardiac physiology. Our strategy consists of (1) introduction of variants directly into wild-type (WT) human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) via prime editing; (2) optogenetic assessment of calcium and membrane voltage dynamics in single hiPSC-CMs within the pool of edited and unedited cells; and (3) in situ single-cell genotyping of the phenotyped hiPSC-CMs with single-allele resolution. By optimizing and integrating each of these steps, we created a platform that enables VUS characterization in 10 days. We validated the REVi-SCOPE’s capabilities by analyzing the properties of established arrhythmogenic variants. We then used REVi-SCOPE to reveal the functional impact of a VUS, TRPM4 A320V , identified in a child with a conduction block. Together, our results show that REVi-SCOPE enables functional characterization of VUSs linked to cardiac arrhythmias with unprecedented throughput.

  • Open Access

    Cardiac fibroblast-mediated ECM remodeling regulates maturation in an in vitro 3D engineered cardiac tissue

    by Yongjun Jang, Myeongjin Kang, Yong Guk Kang, Dongtak Lee, Hyo Gi Jung, Dae Sung Yoon, Jongseong Kim, Yongdoo Park

    Cardiac fibroblasts play an important role in heart homeostasis, regeneration, and disease by producing extracellular matrix (ECM) proteins and remodeling enzymes. Under normal conditions, fibroblasts exist in a quiescent state and maintain homeostasis, such as tissue structure and ECM turnover. However, if they become activated upon stimuli, such as injury, aging, or mechanical stress, which can lead to disease through excessive cell proliferation and ECM production. In addition to their role in disease progression, it remains unclear how cardiac fibroblasts contribute to cardiac maturation during development and whether the mechanism driving cytokine and ECM production during development aligns with those observed in pathological conditions. In this study, we investigated the functional and structural maturation of engineered cardiac tissue by modulating fibroblast activity within a three-dimensional (3D) in vitro model. In this model, human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) and human primary cardiac fibroblasts (FBs) were co-cultured in a fibrin gel and their morphology, beating characteristics, beating force, and mRNA expression profiles were analyzed. The results demonstrate that functional and structural maturation were enhanced by fibroblast-driven tissue contraction and collagen deposition, while inhibition of ECM remodeling impaired both processes. However, excessive collagen accumulation reduced functional maturation by limiting contractile efficiency. Our data suggest that ECM remodeling by cardiac fibroblasts is essential for cardiac tissue maintenance and maturation. Additionally, the regulation of collagen deposition by fibroblast activity will be a key focus of future research, as it may critically influence both cardiac development and the progression of heart disease.


  • Open Access

    Cyclic stretching induces maturation of human induced pluripotent stem cell-derived cardiomyocytes through nuclear mechanotransduction

    by Yongjun Jang, Myeongjin Song, Seung-Jong Kim, Yongdoo Park

    During cardiogenesis, cardiac cells receive various stimuli, such as biomechanical and chemical cues, from the surrounding microenvironment, and these signals induce the maturation of heart cells. Mechanical force, especially tensile force in the heart, is one of the key stimuli that induce cardiomyocyte (CM) maturation through mechanotransduction, a process through which physical cues are transformed into biological responses. However, the effects and mechanisms of tensile force on cell maturation are poorly studied. In this study, we developed a cyclic stretch system that mimics the mechanical environment of the heart by loading tensile force to human induced pluripotent stem cell (hiPSC)-derived CMs. HiPSC-CMs cultured with the cyclic stretch system showed increased cell alignment, sarcomere length and expression of maturation markers in mRNA, such as TNNI3, MYL2 and TTN, compared to static cultures. Especially, the expression of genes related to nuclear mechanotransduction, such as Yap1, lamin A/C, plectin (PLEC), and desmin (DES), was increased in the cyclically stretched hiPSC-CMs. Furthermore, the volume of the nucleus was increased by as much as 120% in the cyclic stretch group. These results revealed that nuclear mechanotransduction induced by tensile force is involved in CM maturation. Together, these findings provide novel evidence suggesting that nuclear mechanotransduction induced by tensile force is involved in the regulation of cardiac maturation.

  • Open Access

    The Activation of the LIMK/Cofilin Signaling Pathway via Extracellular Matrix–Integrin Interactions Is Critical for the Generation of Mature and Vascularized Cardiac Organoids

    by Ji-Min Noh, Seung-Cheol Choi, Myeong-Hwa Song, Kyung Seob Kim, Seongmin Jun, Jae Hyoung Park, Ju Hyeon Kim, Kyoungmi Kim, Tae Hee Ko, Jong-Il Choi, et al.

    The generation of mature and vascularized human pluripotent stem cell-derived cardiac organoids (hPSC-COs) is necessary to ensure the validity of drug screening and disease modeling. This study investigates the effects of cellular aggregate (CA) stemness and self-organization on the generation of mature and vascularized hPSC-COs and elucidates the mechanisms underlying cardiac organoid (CO) maturation and vascularization. COs derived from 2-day-old CAs with high stemness (H-COs) and COs derived from 5-day-old CAs with low stemness (L-COs) were generated in a self-organized microenvironment via Wnt signaling induction. This study finds that H-COs exhibit ventricular, structural, metabolic, and functional cardiomyocyte maturation and vessel networks consisting of endothelial cells, smooth muscle cells, pericytes, and basement membranes compared to L-COs. Transcriptional profiling shows the upregulation of genes associated with cardiac maturation and vessel formation in H-COs compared with the genes in L-COs. Through experiments with LIMK inhibitors, the activation of ROCK-LIMK-pCofilin via ECM–integrin interactions leads to cardiomyocyte maturation and vessel formation in H-COs. Furthermore, the LIMK/Cofilin signaling pathway induces TGFβ/NODAL and PDGF pathway activation for the maturation and vascularization of H-COs. The study demonstrates for the first time that LIMK/Cofilin axis activation plays an important role in the generation of mature and vascularized COs.


  • LEFTY-PITX2 signaling pathway is critical for generation of mature and ventricular cardiac organoids in human pluripotent stem cell-derived cardiac mesoderm cells

    by Myeong-Hwa Song, Seung-Cheol Choi, Ji-Min Noh, Hyung Joon Joo, Chi-Yeon Park, Jung-Joon Cha, Tae Hoon Ahn, Tae Hee Ko, Jong-Il Choi, Ji Eun Na, et al.


  • Open Access

    Modeling Hypoxic Stress In Vitro Using Human Embryonic Stem Cells Derived Cardiomyocytes Matured by FGF4 and Ascorbic Acid Treatment

    by Seung-Cheol Choi, Ha-Rim Seo, Long-Hui Cui, Myeong-Hwa Song, Ji-Min Noh, Kyung-Seob Kim, Ji-Hyun Choi, Jong-Ho Kim, Chi-Yeon Park, Hyung Joon Joo, et al.

    Mature cardiomyocytes (CMs) obtained from human pluripotent stem cells (hPSCs) have been required for more accurate in vitro modeling of adult-onset cardiac disease and drug discovery. Here, we found that FGF4 and ascorbic acid (AA) induce differentiation of BG01 human embryonic stem cell–cardiogenic mesoderm cells (hESC-CMCs) into mature and ventricular CMs. Co-treatment of BG01 hESC-CMCs with FGF4+AA synergistically induced differentiation into mature and ventricular CMs. FGF4+AA-treated BG01 hESC-CMs robustly released acute myocardial infarction (AMI) biomarkers (cTnI, CK-MB, and myoglobin) into culture medium in response to hypoxic injury. Hypoxia-responsive genes and potential cardiac biomarkers proved in the diagnosis and prognosis of coronary artery diseases were induced in FGF4+AA-treated BG01 hESC-CMs in response to hypoxia based on transcriptome analyses. This study demonstrates that it is feasible to model hypoxic stress in vitro using hESC-CMs matured by soluble factors.


  • Open Access

    Recapitulating Cardiac Structure and Function In Vitro from Simple to Complex Engineering

    by Ana Rita M. P. Santos, Yongjun Jang, Inwoo Son, Jongseong Kim, Yongdoo Park

    Cardiac tissue engineering aims to generate in vivo-like functional tissue for the study of cardiac development, homeostasis, and regeneration. Since the heart is composed of various types of cells and extracellular matrix with a specific microenvironment, the fabrication of cardiac tissue in vitro requires integrating technologies of cardiac cells, biomaterials, fabrication, and computational modeling to model the complexity of heart tissue. Here, we review the recent progress of engineering techniques from simple to complex for fabricating matured cardiac tissue in vitro. Advancements in cardiomyocytes, extracellular matrix, geometry, and computational modeling will be discussed based on a technology perspective and their use for preparation of functional cardiac tissue. Since the heart is a very complex system at multiscale levels, an understanding of each technique and their interactions would be highly beneficial to the development of a fully functional heart in cardiac tissue engineering.


  • Open Access

    Engineering Biomaterials to Guide Heart Cells for Matured Cardiac Tissue

    by Yongjun Jang, Yongdoo Park, Jongseong Kim

    The extracellular matrix (ECM) is needed to maintain the structural integrity of tissues and to mediate cellular dynamics. Its main components are fibrous proteins and glycosaminoglycans, which provide a suitable environment for biological functions. Thus, biomaterials with ECM-like properties have been extensively developed by modulating their key components and properties. In the field of cardiac tissue engineering, the use of biomaterials offers several advantages in that biophysical and biochemical cues can be designed to mediate cardiac cells, which is critical for maturation and regeneration. This suggests that understanding biomaterials and their use in vivo and in vitro is beneficial in terms of advancing cardiac engineering. The current review provides an overview of both natural and synthetic biomaterials and their use in cardiac engineering. In addition, we focus on different strategies to recapitulate the cardiac tissue in 2D and 3D approaches, which is an important step for the maturation of cardiac tissues toward regeneration of the adult heart.


  • Open Access

    Multidimensional assembly using layer-by-layer deposition for synchronized cardiac macro tissues

    by Yongjun Jang, Da Jung Jung, Seung-Cheol Choi, Do-Sun Lim, Jong-Hoon Kim, Gi Seok Jeoung, Jongseong Kim, Yongdoo Park

    The fabrication of biomimetic structures for tissues and organs is emerging in the fields of biomedical engineering and precision medicine. While current progress in biomedical research provides a number of biofabrication methods, the construction of multi-dimensional cardiac tissue is highly challenging due to difficulties in the maturation and synchronization of cardiomyocytes (CMs) in conjunction with other types of cells, such as myofibroblasts and endothelial cells. Here, we show a simple fabrication methodology to construct multi-dimensional cardiac macro tissue (mCMT) by layer-by-layer (LBL) deposition of cells on micro patterned PDMS. mCMTs formed by LBL deposition of pluripotent stem cell (PSC)-derived cardiomyocytes and cardiac fibroblasts formed 3D patterned structures with synchronized beating characteristics. We also demonstrate that cardiac maturation factors such as the gene expression of MLC2v and cTNI and formation of sarcomeres in mCMTs were significantly enhanced by LBL deposition and growth factors during the maturation process. Fabrication of matured mCMTs with synchronized beating enables providing an efficient platform for evaluating the efficacy and toxicity of drug candidates. These results have important implications because mCMTs are applicable to diverse in vitro studies and drug screening methods that require tissue-like structures and functions in a physiological environment.