Peter G. Antreasian
Research Subjects
Peter G. Antreasian has a total of 162 co-authors. Here are the top co-authors by number of shared publications:
- Dante S. Lauretta
Lunar and Planetary Laboratory University of Arizona Tucson Arizona USA
10 shared publications - Jason M. Leonard
KinetX Inc., Simi Valley, CA 93065, USA
9 shared publications - Coralie D. Adam
KinetX, Inc
8 shared publications - Michael C. Moreau
NASA Goddard Space Flight Center, Greenbelt, MD 20771, USA
8 shared publications - Kenneth Getzandanner
Goddard Space Flight Center, Greenbelt, MD, USA
7 shared publications - Michael G. Daly
York University
7 shared publications
Latest Publications
- Open Access
- 1 October 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (10) , 198
OSIRIS-APEX: An OSIRIS-REx Extended Mission to Asteroid Apophis
The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft mission characterized and collected a sample from asteroid (101955) Bennu. After the OSIRIS-REx Sample Return Capsule released to Earth’s surface in 2023 September, the spacecraft diverted into a new orbit that encounters asteroid (99942) Apophis in 2029, enabling a second mission with the same unique capabilities: OSIRIS–Apophis Explorer (APEX). On 2029 April 13, the 340 m diameter Apophis will draw within ∼32,000 km of Earth’s surface, less than 1/10 the lunar distance. Apophis will be the largest object to approach Earth this closely in recorded history. This rare planetary encounter will alter Apophis’s orbit, will subject it to tidal forces that change its spin state, and may seismically disturb its surface. APEX will distantly observe Apophis during the Earth encounter and capture its evolution in real time, revealing the consequences of an asteroid undergoing tidal disturbance by a major planet. Beginning in 2029 July, the spacecraft’s instrument suite will begin providing high-resolution data of this “stony” asteroid—advancing knowledge of these objects and their connection to meteorites. Near the mission’s end, APEX will use its thrusters to excavate regolith, a technique demonstrated at Bennu. Observations before, during, and after excavation will provide insight into the subsurface and material properties of stony asteroids. Furthermore, Apophis’s material and structure have critical implications for planetary defense.
- 1 October 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (10) , 198
Open AccessOSIRIS-APEX: An OSIRIS-REx Extended Mission to Asteroid Apophis
The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft mission characterized and collected a sample from asteroid (101955) Bennu. After the OSIRIS-REx Sample Return Capsule released to Earth’s surface in 2023 September, the spacecraft diverted into a new orbit that encounters asteroid (99942) Apophis in 2029, enabling a second mission with the same unique capabilities: OSIRIS–Apophis Explorer (APEX). On 2029 April 13, the 340 m diameter Apophis will draw within ∼32,000 km of Earth’s surface, less than 1/10 the lunar distance. Apophis will be the largest object to approach Earth this closely in recorded history. This rare planetary encounter will alter Apophis’s orbit, will subject it to tidal forces that change its spin state, and may seismically disturb its surface. APEX will distantly observe Apophis during the Earth encounter and capture its evolution in real time, revealing the consequences of an asteroid undergoing tidal disturbance by a major planet. Beginning in 2029 July, the spacecraft’s instrument suite will begin providing high-resolution data of this “stony” asteroid—advancing knowledge of these objects and their connection to meteorites. Near the mission’s end, APEX will use its thrusters to excavate regolith, a technique demonstrated at Bennu. Observations before, during, and after excavation will provide insight into the subsurface and material properties of stony asteroids. Furthermore, Apophis’s material and structure have critical implications for planetary defense.
- Open Access
- 1 September 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (9) , 167
Stereophotoclinometry for OSIRIS-REx Spacecraft Navigation
We summarize a decade of effort by the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission team to build up the unique capabilities, processes, and procedures required to accomplish the unprecedented navigation performance required during proximity operations at asteroid (101955) Bennu. Stereophotoclinometry was a key technology used for digital terrain model (DTM) generation and landmark navigation, enabling estimation of spacecraft trajectories and Bennu’s geophysical parameters. We outline the concept of operations for OSIRIS-REx landmark navigation and the wide array of testing and verification efforts leading up to OSIRIS-REx’s arrival at Bennu. We relate the outcome of these efforts to the experiences during proximity operations. We discuss navigation and DTM performance during operations, including detailed lessons learned to carry forward for future missions.
- 1 September 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (9) , 167
Open AccessStereophotoclinometry for OSIRIS-REx Spacecraft Navigation
We summarize a decade of effort by the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission team to build up the unique capabilities, processes, and procedures required to accomplish the unprecedented navigation performance required during proximity operations at asteroid (101955) Bennu. Stereophotoclinometry was a key technology used for digital terrain model (DTM) generation and landmark navigation, enabling estimation of spacecraft trajectories and Bennu’s geophysical parameters. We outline the concept of operations for OSIRIS-REx landmark navigation and the wide array of testing and verification efforts leading up to OSIRIS-REx’s arrival at Bennu. We relate the outcome of these efforts to the experiences during proximity operations. We discuss navigation and DTM performance during operations, including detailed lessons learned to carry forward for future missions.
- Open Access
- 1 July 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (7) , 131
Post-flight Evaluation of Lidar-based Digital Terrain Models for OSIRIS-REx Navigation at Bennu
The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft spent more than 2 yr characterizing near-Earth asteroid (101955) Bennu. The OSIRIS-REx Laser Altimeter (OLA) was responsible for producing the most accurate reconstruction of the asteroid’s surface—down to a global resolution of around 5 cm with a data precision of ±1.25 cm. However, the best-quality global OLA digital terrain model (DTM), version 21 (v21), was not available for navigation during proximity operations, nor was the utility of this model evaluated for processing images and altimeter data for navigation. The focus of this paper is the post-flight assessment of the final OLA v21 DTM, its performance for navigation-related analysis, and estimates of corrections needed for the DTM and measurement models. We created 15 cm resolution maplets for processing optical navigation (OpNav) data, and 5 cm resolution DTMs for processing altimeter data, to estimate a combined spacecraft trajectory over five phases of the mission. Our estimated corrections to the OLA instrument model produce altimeter data residuals with a precision of 7.12 cm (1σ; one standard deviation from the mean). The OpNav maplets produce image residuals at 0.2 px (1σ) and estimated landmark locations accurate to ±6 cm, outperforming DTM navigation-related performance requirements. Finally, our estimate of the global DTM scale is more precise and within 1.1σ of previously reported values. We find that a slight discrepancy persists between the image and altimeter data, with image data suggesting that the DTM is too small by 0.049%, but nevertheless is exceptional for navigation.
- 1 July 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (7) , 131
Open AccessPost-flight Evaluation of Lidar-based Digital Terrain Models for OSIRIS-REx Navigation at Bennu
The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft spent more than 2 yr characterizing near-Earth asteroid (101955) Bennu. The OSIRIS-REx Laser Altimeter (OLA) was responsible for producing the most accurate reconstruction of the asteroid’s surface—down to a global resolution of around 5 cm with a data precision of ±1.25 cm. However, the best-quality global OLA digital terrain model (DTM), version 21 (v21), was not available for navigation during proximity operations, nor was the utility of this model evaluated for processing images and altimeter data for navigation. The focus of this paper is the post-flight assessment of the final OLA v21 DTM, its performance for navigation-related analysis, and estimates of corrections needed for the DTM and measurement models. We created 15 cm resolution maplets for processing optical navigation (OpNav) data, and 5 cm resolution DTMs for processing altimeter data, to estimate a combined spacecraft trajectory over five phases of the mission. Our estimated corrections to the OLA instrument model produce altimeter data residuals with a precision of 7.12 cm (1σ; one standard deviation from the mean). The OpNav maplets produce image residuals at 0.2 px (1σ) and estimated landmark locations accurate to ±6 cm, outperforming DTM navigation-related performance requirements. Finally, our estimate of the global DTM scale is more precise and within 1.1σ of previously reported values. We find that a slight discrepancy persists between the image and altimeter data, with image data suggesting that the DTM is too small by 0.049%, but nevertheless is exceptional for navigation.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Contact with Bennu! Flight Performance Versus Prediction of OSIRIS-REx “TAG” Sample Collection
View Video Presentation: https://doi.org/10.2514/6.2022-2521.vid (OSIRIS-REx) mission collected a sample from the surface of the near-Earth asteroid (101955) Bennu in late 2020. Bennu challenged the team with a surface that was much rockier than expected, resulting in modifications to the prelaunch design of the Touch And Go (TAG) sequence. Following enhancements in onboard trajectory correction, ground-based navigation, and maneuver execution error modeling, the spacecraft was delivered to the chosen TAG site within 1 m of the target, and a sample was successfully collected on the first attempt. This paper provides a comprehensive description of all flight dynamics aspects of TAG trajectory planning and execution. It also describes hazard map generation and how that combined with error analysis results to predict the probability of safe contact before TAG and the onboard wave-off determination during TAG.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Contact with Bennu! Flight Performance Versus Prediction of OSIRIS-REx “TAG” Sample Collection
View Video Presentation: https://doi.org/10.2514/6.2022-2521.vid (OSIRIS-REx) mission collected a sample from the surface of the near-Earth asteroid (101955) Bennu in late 2020. Bennu challenged the team with a surface that was much rockier than expected, resulting in modifications to the prelaunch design of the Touch And Go (TAG) sequence. Following enhancements in onboard trajectory correction, ground-based navigation, and maneuver execution error modeling, the spacecraft was delivered to the chosen TAG site within 1 m of the target, and a sample was successfully collected on the first attempt. This paper provides a comprehensive description of all flight dynamics aspects of TAG trajectory planning and execution. It also describes hazard map generation and how that combined with error analysis results to predict the probability of safe contact before TAG and the onboard wave-off determination during TAG.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Concept of Operations for OSIRIS-REx Optical Navigation Image Planning
View Video Presentation: https://doi.org/10.2514/6.2022-1569.vid Optical navigation (OpNav) is a critical subsystem of the OSIRIS-REx asteroid sample return mission, which operated in the vicinity of near-Earth asteroid (101955) Bennu from August 2018 through April 2021. A substantial amount of mission resources across multiple subsystems and institutions is required to ensure that the OpNav data are successfully acquired. The KinetX OpNav team, part of the Flight Dynamics System (FDS), is responsible for performing required analysis to develop the OpNav operations plans; requesting, reviewing and verifying the plans; and ultimately using the image data for critical navigation operations. The FDS team, responsible for the mission navigation, is operated by KinetX Aerospace with management and operations support from NASA’s Goddard Space Flight Center. The Science Processing and Operations Center (SPOC), located at the University of Arizona’s Lunar and Planetary Laboratory, is responsible for generating the planning products for all science and most OpNav data. These plans are integrated into the spacecraft sequences, tested, and commanded by the Mission Support Area (MSA) at Lockheed Martin Space. To ensure mission-critical navigation image data are successfully acquired, the plan is developed through a waterfall of planning cycles over the course of 3 months prior to onboard plan execution. During the initial strategic planning for a mission phase, detailed analysis is performed by the OpNav team to conceptualize the concept of operations (ConOps) for image data collection. This phase OpNav Narrative is included along with other strategic planning documents for the key ground segment stakeholders to review and provide feedback. The detailed OpNav plans get defined in the tactical planning cycle, which spans 8 to 3 weeks before the week-long integrated sequence is executed on-board the spacecraft. During the tactical cycle, the initial OpNav Request is submitted along with the science requests, kicking off development of the science and OpNav plans. Once the initial plan is drafted, interfaces are exercised so that the plan can be reviewed and iterated, if necessary. A rigorous schedule is followed by the planning teams during the implementation cycle, spanning the last 18 days before uplink, to ensure all the necessary integration, testing, and reviewing can occur on time. The development of the OpNav planning ConOps, including responsibilities, interfaces, timelines, and procedures, took extensive collaboration across mission elements and institutions. The process was robust throughout the 137 weeks of continuous Optical Navigation Operations at Bennu, which concluded on April 9th, 2021.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Concept of Operations for OSIRIS-REx Optical Navigation Image Planning
View Video Presentation: https://doi.org/10.2514/6.2022-1569.vid Optical navigation (OpNav) is a critical subsystem of the OSIRIS-REx asteroid sample return mission, which operated in the vicinity of near-Earth asteroid (101955) Bennu from August 2018 through April 2021. A substantial amount of mission resources across multiple subsystems and institutions is required to ensure that the OpNav data are successfully acquired. The KinetX OpNav team, part of the Flight Dynamics System (FDS), is responsible for performing required analysis to develop the OpNav operations plans; requesting, reviewing and verifying the plans; and ultimately using the image data for critical navigation operations. The FDS team, responsible for the mission navigation, is operated by KinetX Aerospace with management and operations support from NASA’s Goddard Space Flight Center. The Science Processing and Operations Center (SPOC), located at the University of Arizona’s Lunar and Planetary Laboratory, is responsible for generating the planning products for all science and most OpNav data. These plans are integrated into the spacecraft sequences, tested, and commanded by the Mission Support Area (MSA) at Lockheed Martin Space. To ensure mission-critical navigation image data are successfully acquired, the plan is developed through a waterfall of planning cycles over the course of 3 months prior to onboard plan execution. During the initial strategic planning for a mission phase, detailed analysis is performed by the OpNav team to conceptualize the concept of operations (ConOps) for image data collection. This phase OpNav Narrative is included along with other strategic planning documents for the key ground segment stakeholders to review and provide feedback. The detailed OpNav plans get defined in the tactical planning cycle, which spans 8 to 3 weeks before the week-long integrated sequence is executed on-board the spacecraft. During the tactical cycle, the initial OpNav Request is submitted along with the science requests, kicking off development of the science and OpNav plans. Once the initial plan is drafted, interfaces are exercised so that the plan can be reviewed and iterated, if necessary. A rigorous schedule is followed by the planning teams during the implementation cycle, spanning the last 18 days before uplink, to ensure all the necessary integration, testing, and reviewing can occur on time. The development of the OpNav planning ConOps, including responsibilities, interfaces, timelines, and procedures, took extensive collaboration across mission elements and institutions. The process was robust throughout the 137 weeks of continuous Optical Navigation Operations at Bennu, which concluded on April 9th, 2021.
- Open Access
- 1 November 2021
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 2 (6) , 219
Mass and Shape Determination of (101955) Bennu Using Differenced Data from Multiple OSIRIS-REx Mission Phases
The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) mission collected a sample from the rubble-pile asteroid (101955) Bennu for return to Earth. For the successful Touch And Go sample acquisition maneuver, the shape and mass of the asteroid needed to be known precisely. Here we use a combination of radiometric, image landmark, and laser altimetry data to determine Bennu’s mass, shape, and orientation simultaneously and to verify existing models thereof. Our shape determination consists of estimating a scale factor and three frame rotation angles that apply to both the global digital terrain model (GDTM) and the landmark coordinates. We use a data type called image constraints, where we take the difference of the observation of the same landmark in images taken at two different times. We analyze data from two phases of the OSIRIS-REx mission, Orbital B and Recon B, and show that interphase image constraints greatly reduce interdependencies between estimated parameters for mass, GDTM scale, and biases on the altimetry data. This results in an improved solution for the mass and shape relative to considering a single mission phase. We find Bennu’s gravitational parameter GM to be 4.89256 ± 0.00035 m3 s−2, and we find a scale factor of 1.000896 ± 0.00036 for the altimetry-based GDTM. Using the scaled volume, this results in a bulk density of 1191.57 ± 1.74 kg m−3 , which is within the uncertainties of previous analyses but more precise.
- 1 November 2021
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 2 (6) , 219
Open AccessMass and Shape Determination of (101955) Bennu Using Differenced Data from Multiple OSIRIS-REx Mission Phases
The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) mission collected a sample from the rubble-pile asteroid (101955) Bennu for return to Earth. For the successful Touch And Go sample acquisition maneuver, the shape and mass of the asteroid needed to be known precisely. Here we use a combination of radiometric, image landmark, and laser altimetry data to determine Bennu’s mass, shape, and orientation simultaneously and to verify existing models thereof. Our shape determination consists of estimating a scale factor and three frame rotation angles that apply to both the global digital terrain model (GDTM) and the landmark coordinates. We use a data type called image constraints, where we take the difference of the observation of the same landmark in images taken at two different times. We analyze data from two phases of the OSIRIS-REx mission, Orbital B and Recon B, and show that interphase image constraints greatly reduce interdependencies between estimated parameters for mass, GDTM scale, and biases on the altimetry data. This results in an improved solution for the mass and shape relative to considering a single mission phase. We find Bennu’s gravitational parameter GM to be 4.89256 ± 0.00035 m3 s−2, and we find a scale factor of 1.000896 ± 0.00036 for the altimetry-based GDTM. Using the scaled volume, this results in a bulk density of 1191.57 ± 1.74 kg m−3 , which is within the uncertainties of previous analyses but more precise.
- Open Access
- 9 October 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (41) , eabc3350
Heterogeneous mass distribution of the rubble-pile asteroid (101955) Bennu
The asteroid (101955) Bennu has a heterogeneous internal mass distribution with an underdense center and equatorial bulge.
- 9 October 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (41) , eabc3350
Open AccessHeterogeneous mass distribution of the rubble-pile asteroid (101955) Bennu
The asteroid (101955) Bennu has a heterogeneous internal mass distribution with an underdense center and equatorial bulge.
- Open Access
- 19 September 2020
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 7 (9)
Initial Orbit Determination and Event Reconstruction From Estimation of Particle Trajectories About (101955) Bennu
The OSIRIS‐REx mission has observed multiple instances of particles being ejected from the surface of near‐Earth asteroid (101955) Bennu. The ability to quickly identify the particle trajectories and origins is necessary following a particle ejection event. Using proven initial orbit determination techniques, we can rapidly estimate particle trajectories and ejection locations. We present current results pertaining to the identification of particle tracks, an evaluation of the estimated orbits and the excess velocity necessary to induce the particle ejection from the surface, and the uncertainty quantification of the ejection location. We estimate energies per particle ranging from 0.03 to 11.03 mJ for the largest analyzed events and velocities ranging from 5 to 90 cm/s, though we exclude the highest‐velocity particles in this technique. We estimate ejection times for eight events and constrain six of the analyzed ejection events to have occurred between about 16:30 and 19:00 local solar time, with the largest events occurring between 16:30 and 18:05.
- 19 September 2020
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 7 (9)
Open AccessInitial Orbit Determination and Event Reconstruction From Estimation of Particle Trajectories About (101955) Bennu
The OSIRIS‐REx mission has observed multiple instances of particles being ejected from the surface of near‐Earth asteroid (101955) Bennu. The ability to quickly identify the particle trajectories and origins is necessary following a particle ejection event. Using proven initial orbit determination techniques, we can rapidly estimate particle trajectories and ejection locations. We present current results pertaining to the identification of particle tracks, an evaluation of the estimated orbits and the excess velocity necessary to induce the particle ejection from the surface, and the uncertainty quantification of the ejection location. We estimate energies per particle ranging from 0.03 to 11.03 mJ for the largest analyzed events and velocities ranging from 5 to 90 cm/s, though we exclude the highest‐velocity particles in this technique. We estimate ejection times for eight events and constrain six of the analyzed ejection events to have occurred between about 16:30 and 19:00 local solar time, with the largest events occurring between 16:30 and 18:05.
- 6 December 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 366 (6470) , 1217-+
Episodes of particle ejection from the surface of the active asteroid (101955) Bennu
Bennu ejects material from its surface: Most asteroids appear inert, but remote observations show that a small number experience mass loss from their surfaces. Lauretta and Hergenrother et al. describe close-range observations of mass loss on the near-Earth asteroid Bennu (see the Perspective by Agarwal). Shortly after arriving at Bennu, navigation cameras on the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security—Regolith Explorer) spacecraft detected objects 1 to 10 centimeters in diameter moving above the surface. Analysis of the objects' trajectories showed that they originated in discrete ejection events from otherwise unremarkable locations on Bennu. Some objects remained in orbit for several days, whereas others escaped into interplanetary space. The authors suggest multiple plausible mechanisms that could underlie this activity. Science , this issue p. eaay3544 ; see also p. 1192
- 6 December 2019
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 366 (6470) , 1217-+
Episodes of particle ejection from the surface of the active asteroid (101955) Bennu
Bennu ejects material from its surface: Most asteroids appear inert, but remote observations show that a small number experience mass loss from their surfaces. Lauretta and Hergenrother et al. describe close-range observations of mass loss on the near-Earth asteroid Bennu (see the Perspective by Agarwal). Shortly after arriving at Bennu, navigation cameras on the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security—Regolith Explorer) spacecraft detected objects 1 to 10 centimeters in diameter moving above the surface. Analysis of the objects' trajectories showed that they originated in discrete ejection events from otherwise unremarkable locations on Bennu. Some objects remained in orbit for several days, whereas others escaped into interplanetary space. The authors suggest multiple plausible mechanisms that could underlie this activity. Science , this issue p. eaay3544 ; see also p. 1192