MBMaria Do Socorro Rocha Bastos

Maria Do Socorro Rocha Bastos

*This is an algorithmically generated author record based on publicly available information.

Maria Do Socorro Rocha Bastos has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Liquid Smoke Incorporation on the Structural, Barrier, and Functional Properties of Okra Mucilage–Corn Starch Films

    by Nayanne Lima Dos Santos Ferreira, Luana Kelly Sampaio Facundo, Maryana Melo Frota, Maria Do Socorro Rocha Bastos, Lorena Maria Freire, Kaliana Sitônio Eça, Jeanlex Soares de Sousa, João Borges Laurindo, Thomas Karbowiak, Patrícia Marques De Farias, et al.

    The present study investigated the effect of liquid smoke (LS) on the physicochemical, structural, barrier, and functional properties of okra mucilage–corn starch (OMCS) films. Formulations containing varying concentrations of LS (0–3%) were prepared using the casting method. The incorporation of LS modified the rheological behavior of the film-forming dispersions, as evidenced by increased apparent viscosity and consistency index. In the films, water solubility increased from 43.6 to 53.2%, contact angle increased from 31.9° to 55.6°, and opacity increased from 4.73 to 8.83, while water vapor permeability decreased from 1.05 to 0.88 g·mm·m−2·h−1·kPa−1, indicating modifications in matrix organization and surface hydrophobicity. Tensile strength increased from 26.3 to 40.5 MPa at 3% LS, accompanied by a slight reduction in elongation, suggesting enhanced structural rigidity. Structural analyses revealed interactions between the LS phenolic compounds and the polysaccharide hydroxyl groups, resulting in a more cohesive polymeric network. LS was the main contributor to the film’s antioxidant activity owing to its elevated phenolic content and free radical scavenging capacity. The films also showed substantial degradation under soil burial conditions, with mass loss ranging from 61% to 96%. Overall, LS proved to be an effective functional additive, improving the structural and antioxidant performance of OMCS films and expanding their potential for active food packaging applications.

  • Open Access

    Valorization of amazonian fruit agro-industrial by-products for sustainable production of bacterial cellulose nanofibers for food bio-packaging

    by Kelvi Wilson Evaristo Miranda, Gabriel Viana Sá, Maryana Melo Frota, João Paixão dos Santos Neto, Miguel Ângelo Almeida Pinheiro de Carvalho, Nuno Miguel Velosa Nunes, Mariana Teixeira da Costa Machado, Tiago Marcolino de Souza, Maria Do Socorro Rocha Bastos, Lucicléia Barros de Vasconcelos

    The expansion of agro-industry creates large volumes of carbon-rich organic waste that pose environmental challenges but also offer opportunities for valorization as sustainable feedstocks for biocomposite production. This study aimed to produce and characterize bacterial cellulose nanofibers (BCN) from agro-industrial wastes (AIW) from soursop ( Annona muricata L.; BCN-S) and genipap ( Genipa americana L.; BCN-G) collected in the Brazilian Amazon. Substrates (2.5% w/v) were heated to 70 °C for 15 min and inoculated with 10% (w/v) starter culture SCOBY (symbiotic culture of bacteria and yeasts). The substrates exhibited variations in the carbohydrate-to-cellulose conversion profile due to the selective activity of SCOBY. BCN-G showed a good yield (14.50 g/L), highest crystallinity index (CrI = 75.2%), a calculated crystallite size (D av ) of 163.1 nm and the presence of type I cellulose, as well as traces of type II cellulose. However, the control BCN sample (sucrose) exhibited a higher enthalpy of fusion (280 J/g), suggesting greater crystalline purity. BCN-G was incorporated into potato-starch films (5–15% v/v) yielding homogeneous, mostly transparent films with strong UV-blocking (> 99% in tested regions) and numerically lower water vapor permeability (from 1.36 to 1.24 g.mm/m 2 .h.kPa for the 15% BCN sample). However, differences in some barrier metrics were not statistically significant. Overall, BCN derived from genipap byproducts appears promising as a biodegradable reinforcing agent for starch-based food packaging, supporting circular economy goals and SDG 12 (Responsible Consumption and Production).


  • Synthesis of Polyurethanes and Semi‐Interpenetrating Polymer Networks From Oligosaccharides

    by Atanu Biswas, Huai N. Cheng, Michael Appell, Bret Chisolm, Roselayne F. Furtado, Maria Socorro Bastos, Carlucio R. Alves

    Oligosaccharides occur naturally in many foods and can also be sourced from industrial solid waste. To enhance their value, two oligosaccharides, raffinose and melezitose, have been reacted with toluene diisocyanate (TDI) to produce polyurethanes. The resulting products vary in form—liquid, gel, or solid gel—depending on the stoichiometric ratio of the starting materials. Both conventional and microwave heating have been employed in the synthesis, with microwave heating proving effective in reducing reaction time compared to conventional heating. The resulting polymers have been characterized using 13C NMR, FT‐IR, TGA, and DSC to confirm their structural and thermal properties. Additionally, the feasibility of incorporating a second polymer into the oligosaccharide‐based polyurethane, thereby creating a semi‐interpenetrating polymer network, has been demonstrated. Examples include the successful embedding of poly(lactic acid) and poly(vinyl pyrrolidone) within the polyurethane matrix. The newly developed materials reported in this work may be used as bioplastics and potential replacements for petroleum‐based materials.


  • Open Access

    Impact of the extraction temperature on the antifungal efficiency and valorization potential of anise (Pimpinella Anisum L.) essential oil residues: A sustainable strategy

    by Patrícia Monteiro Evangelista, Francisco Leonardo Gomes de Lima, Livia de Sousa da Cunha, Michele Pereira Cavalcante, Jéssica Azevedo Furtado, Sandra dos Santos Silva, Sâmela Leal Barros, Christiana de Fátima Bruce da Silva, Kirley Marques Canuto, Maria Do Socorro Rocha Bastos, et al.

    The exploration of essential oils (EOs) in the pharmaceutical and food industries highlights their importance, due to the bioactive compounds they contain, which possess antioxidant, antimicrobial, and antifungal properties. This study aimed to evaluate the impact of different extraction temperatures on the yield, chemical composition, and the antifungal efficacy of anise essential oil (Pimpinella anisum L.) using hydrodistillation. Additionally, it explored the potential of producing a flour from the EO extraction residue as an innovative waste utilization strategy. Findings indicated that an optimal extraction temperature of 145ºC led to a predominance of E-anethole, as identified by gas chromatography-mass spectrometry (GC-MS), and demonstrated superior antifungal activity against Colletotrichum sp. The produced flour with a granulometry of 250 µm, stood out for its high protein content (19.81±0.09%) and high content of minerals (manganese, calcium, phosphorus, zinc, and magnesium), with iron and copper values that exceed the daily reference values set by the Ministry of Health. It also featured low water activity (0.25), medium hygroscopicity (48.02%), a pH of 5.6, and titratable acidity of 0.93% (expressed as malic acid). The analysis of bioactive compounds revealed total phenolics at 28.93 mg GAE/100g and antioxidant capacity of 5.60±0.897 µM trolox/g. This study underscores the importance of extraction temperature in essential oil quality and efficacy, proposing a sustainable approach to utilizing EO production residues making it a viable option for human consumption due to its nutritional composition and antioxidant potential.


  • Open Access

    Effect of Added Plant Hemicelluloses on the Stability of Frozen Bread Dough

    by Luísa Helena Ellery Mourão, Francisco Rogênio da Silva Mendes, Felipe Domingos de Sousa, Ana Cristina de Oliveira Monteiro Moreira, Stella Regina Arcanjo Medeiros, Maria Do Socorro Rocha Bastos, Gilberto Dantas Saraiva, Alexandre Magno Rodrigues Teixeira, Renato de Azevedo Moreira

    The use of hydrocolloids has greatly increased in recent years due to their pivotal role as functional ingredients. They can increase food consistency, control the microstructure that affects water absorption, alter texture and flavor, and improve the shelf life of baked products. In this work, we analyzed the effect of plant hemicelluloses such as Caesalpinia pulcherrima galactomannans and Tamarindus indica xyloglucans on the stability of frozen French bread dough. The amount of these additives used was optimized from an obtained central composite design- (CCD-) response surface methodology (RSM) of the alveograph parameters. Batches were characterized for moisture, water activity (aw), and texture using SEM, DSC, and TGA analyses when frozen for up to 60 days. Batches containing hemicelluloses showed better stability for aw over time. There was no difference between the texture parameters of the samples studied for 60 days. Both added hemicelluloses presented fewer fractures at 30 days and less wear at 60 days, in addition to better performance in the TGA analysis after less than 30 days of frozen storage. Batches containing only xyloglucans or galactomannans had a higher solidification peak temperature after 60 days. Both plant hemicelluloses reduced the damage caused by cold storage and improved stability for water activity. Also, dough preparations containing these additives showed better moisture retention, as well as less wear and tear and fewer fractures over their shelf life. Our evaluation suggests C. pulcherrima and T. indica are nonconventional sources of hydrocolloids that could be utilized in the bakery industry.


  • Open Access

    MASSA FRESCA SEM GLÚTEN À BASE DE FARINHA DE INHAME (Dioscorea spp.): AVALIAÇÃO DA QUALIDADE TECNOLÓGICA E SENSORIAL

    by Kelvi Wilson Evaristo Miranda, Maryana Melo Frota, Juliana Maria Maia Freire, Larissa Morais Ribeiro da Silva, Maria Do Socorro Rocha Bastos

    O objetivo deste trabalho foi desenvolver e avaliar a qualidade tecnológica e sensorial de massas frescas sem glúten à base de farinha de inhame (Dioscorea spp.) Com o objetivo de diversificar o mercado para a população celíaca, visto que é a única alternativa de tratamento para esta. A doença autoimune é a eliminação completa do glúten da dieta, além de agregar valor a esse tubérculo, possibilitando novas formas de uso. O processo de produção da farinha de inhame foi realizado na Embrapa Agroindústria Tropical e foi obtido a partir da liofilização do tubérculo por 48 horas, com posterior esmagamento. Quatro formulações de macarrão tipo macarrão foram desenvolvidas: 100% farinha de arroz - formulação padrão (Controle); 100% de farinha de inhame (F100); 75% de farinha de inhame/25% de farinha de arroz (F75) e; 50% de farinha de inhame/50% de farinha de arroz (F50). As massas foram analisadas quanto ao tempo de cozimento, aumento de massa e volume do produto cozido, perda de sólidos na água de cozimento e por análise sensorial, sendo os atributos de cor, sabor, aroma e textura avaliados por 85 provadores. A adição de farinha de inhame aumentou consideravelmente a perda de sólidos e o ganho de volume durante o cozimento e reduziu o aumento na massa do produto cozido e no tempo de cozimento. Os dados obtidos na análise sensorial mostraram que o F100 foi a formulação com maior aceitabilidade, sendo uma alternativa viável e nutritiva para pacientes com doença celíaca. O presente estudo demonstrou o potencial da farinha de inhame como principal matéria-prima para massas frescas sem glúten, além de promover seu uso em outras finalidades para a dieta da população em geral, uma vez que possui nutrientes importantes para a saúde. Portanto, esses fatores são importantes para aumentar o valor dessa cultura para o agronegócio.

  • Open Access

    Nanoemulsão de cinamaldeído assistida por ultrassom: otimização das variáveis operacionais, propriedades coloidais e atividade antibacteriana in-vitro

    by Alane Rafaela Costa Ribeiro, Taíla Veloso de Oliveira, José Carlos Baffa Júnior, Maria Do Socorro Rocha Bastos, Lais Fernanda Batista, Samiris Côcco Teixeira Teixeira, Nilda de Fátima Ferreira Soares

    Nanoemulsões de cinamaldeído (NNC) assistidas por ultrassom, surgem como uma alternativa energeticamente viável e potencialmente promissora para a entrega controlada desse composto orgânico bioativo. Nesse contexto, o objetivo central do estudo consistiu na otimização das variáveis operacionais do processo de produção assistida por ultrassom de NNC, a fim de avaliar o efeito dos elementos operacionais na estabilidade cinética, composição bioativa e atividade antibacteriana das NNC obtidas. A metodologia de superfície de resposta (MSR), via delineamento composto central rotacional foi utilizada para o ajuste, quando possível, dos modelos polinomiais de segunda ordem. O tempo de sonicação (TS) e a amplitude da potência (AP) ultrassônica foram os fatores estudados, enquanto as variáveis respostas corresponderam, respectivamente ao diâmetro hidrodinâmico (DH), ao índice de polidispersidade (PDI), ao potencial zeta (PZ), a turbidez (T) e a composição fenólica total (CFT). A atividade antibacteriana in-vitro dos sistemas obtidos foi realizada por meio da metodologia analítica de difusão em ágar-poço. Os resultados mostraram que independentemente do TS utilizado no processo, os menores valores para o DH e a T das nanoemulsões foram obtidos em condições otimizadas com baixa amplitude da potência ultrassônica. Os valores de PDI revelaram que as NNC eram monodispersas, com teores de CFT preservados durante o processo de obtenção e considerável atividade antibacteriana. Logo, foi possível, por meio da MSR propor as condições operacionais ideais durante o preparo e assim obter NNC com características físico-químicas que reforçam a sua elevada estabilidade cinética e manutenção da composição bioativa e antimicrobiana durante o processamento.


  • Open Access

    Revestimentos comestíveis à base de fécula de mandioca (manihot esculenta) em produtos vegetais: uma revisão

    by Fabia Costa, Renata Chastinet Braga, Maria Do Socorro Rocha Bastos, Daniela Nogueira dos Santos, Maryana Melo Frota

    As embalagens biodegradáveis são comestíveis e têm um alto potencial por contribuir na preservação do alimento, os polissacarídeos tem sido estudado como componente na produção de revestimentos comestíveis, entre eles o amido de mandioca, por apresentar baixo custo e boa propriedade para formação das embalagens ativas. A fécula de mandioca apresenta propriedades funcionais como gelatinização, retrogradação, inchamento e sinérese que devem ser controladas no processo de formação do revestimento, a fim de torná-lo mais útil e melhorar a sua aplicação, é necessário que o amido sofra modificações que podem ser realizada através de métodos químicos, físicos, reticulação, oxidação e substituição, incluindo esterificação e eterificação, piroconversão. Devido a perecibilidade dos produtos hortifrúti, a utilização de revestimento comestível tem se tornado uma tecnologia inovadora no controle de qualidade e aumento da vida útil destes alimentos. O objetivo deste trabalho foi de revisar a importância da utilização da fécula de mandioca na produção de embalagens comestíveis e sua aplicação em produtos de origem vegetal nos últimos anos.


  • Effect of acid catalyst on pyroconversion of breadfruit ( Artocarpus altilis ) starch: Physicochemical and structural properties

    by Erivan de Souza Oliveira, Mighay Lovera, Valessa Rios Pires, Francisco Rogênio da Silva Mendes, Nadya Virginia Lima Peixoto Maia, João Pedro Viana Rodrigues, Maria Do Socorro Rocha Bastos, Huai N. Cheng, Atanu Biswas, Renato de Azevedo Moreira, et al.


  • Open Access

    Effect of the addition of psyllium (Plantago Ovata Forsk) on the total and bioaccessible concentration of the minerals sodium and potassium in frozen banana pulp

    by Elisangela Aparecida Nazario Franco, Davy William Hidalgo Chávez, Carlos Alberto Kenji Taniguchi, Antonia Barbosa de Lima, Maria Do Socorro Rocha Bastos, Nathália Ramos de Melo

    Increased blood pressure is one of the main risk factors for cardiovascular disease. The World Health Organization (WHO) recommends that sodium intake should be moderate and potassium intake can be increased, as its intake is associated with a lower incidence of cardiovascular disease. Banana is a fruit rich in potassium and has large post-harvest losses due to its perishability. The production of frozen pulps is an alternative to reduce these losses. To add nutritional and functional benefits to the fruit pulp, it is possible to add soluble fiber, since its high intake is known to have a protective effect against cardiovascular disease and its intake by individuals does not meet the recommended minimum. There is evidence that psyllium dietary fiber contributes to lowering blood pressure, lowering cholesterol, lowering blood glucose and its incorporation into foods may offer health benefits such as preventing high blood pressure. Knowing that sodium and potassium intake is related to blood pressure, this study aimed to investigate the content of the minerals sodium and potassium in frozen banana pulp added with psyllium and to verify the concentrations of bioaccessibility in in vitro digestion. Our results showed that the addition of psyllium contributed to an increase in the content of the minerals potassium and sodium and that after the simulated digestions we verified that the final concentrations of the mineral potassium are in agreement with other results present in the literature, we also saw that despite increasing the sodium content, the final concentration of the dialysate (which would be absorbed by the human body) was 0.17%, being very low and ideal for preventing high blood pressure.