Levent Özcan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Levent Özcan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Sedat Yurdakal
Kimya Bölümü, Fen-Edebiyat Fakültesi, Afyon Kocatepe Üniversitesi, Ahmet Necdet Sezer Kampüsü, Afyonkarahisar, Turkey
3 shared publications - Leonardo Palmisano
Dipartimento di Ingegneria, University of Palermo, Viale delle Scienze Ed. 6, 90128 Palermo, Italy
2 shared publications Sedat Yurdakal
2 shared publicationsSıdıka Çetinkaya
2 shared publications- Adile Şahin
Afyon Kocatepe Universitesi
1 shared publication - Ahmet Fatih Yuran
Afyon Kocatepe Universitesi
1 shared publication
Latest Publications
- Open Access
- 20 December 2024
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 5 (2) , 214-227
Coating of the Surface of 316L Stainless Steel with Hydroxyapatite Produced from Eggshell Using the Sol-Gel Method
In this study, the production of high-yield and purity calcium nitrate from eggshell, a biological waste, and the usability of the obtained calcium nitrate in the production of hydroxyapatite (HAP) by the sol-gel method were investigated. In addition, the obtained HAP was used to coat 316L steel using the dip coating method. For this purpose, calcium nitrate, which will be used as a precursor in HAP production, was produced from chicken eggshells with high calcium carbonate content. The surface of 316L stainless steel discs was coated with sol-gel obtained from a mixture of calcium nitrate and triethyl phosphite by dip-coating method. Then, the 316L discs were dried and heat treated at 500 °C to form HAP on their surfaces. XRD and SEM techniques were used for the characterization of the obtained HAP structure. Unlike previous studies, it has been shown that chicken eggshell, a biological waste, can be used to produce HAP, a biocompatible material, and the surface of 316L stainless steel can be coated with the produced HAP.
- 20 December 2024
- Published by Journal of Materials and Mechatronics: A in Journal of Materials and Mechatronics: A
- Vol. 5 (2) , 214-227
Open AccessCoating of the Surface of 316L Stainless Steel with Hydroxyapatite Produced from Eggshell Using the Sol-Gel Method
In this study, the production of high-yield and purity calcium nitrate from eggshell, a biological waste, and the usability of the obtained calcium nitrate in the production of hydroxyapatite (HAP) by the sol-gel method were investigated. In addition, the obtained HAP was used to coat 316L steel using the dip coating method. For this purpose, calcium nitrate, which will be used as a precursor in HAP production, was produced from chicken eggshells with high calcium carbonate content. The surface of 316L stainless steel discs was coated with sol-gel obtained from a mixture of calcium nitrate and triethyl phosphite by dip-coating method. Then, the 316L discs were dried and heat treated at 500 °C to form HAP on their surfaces. XRD and SEM techniques were used for the characterization of the obtained HAP structure. Unlike previous studies, it has been shown that chicken eggshell, a biological waste, can be used to produce HAP, a biocompatible material, and the surface of 316L stainless steel can be coated with the produced HAP.
- Open Access
- 15 July 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (18)
Partial Photoelectrocatalytic Oxidation of 3‐Methylpiridine in Green Conditions by Nanotube/Nanowire Ti/TiO2 Plates Prepared in Aqueous, Glycerol, or Ethylene Glycol Medium
Nanotube/nanowire structured TiO2 samples on Ti plates were prepared by anodic oxidation in aqueous, glycerol or ethylene glycol medium under different experimental conditions and characterized by XRD, SEM‐EDX, electrochemical methods (photocurrent profiles and electrochemical impedance spectroscopy). The nanostructured TiO2 was built on relatively large Ti plates, and consequently, in some preparation conditions, different morphologic properties were observed in the underside and upside zones of the electrodes, especially in ethylene glycol medium. The electrodes were tested for selective photoelectrocatalytic oxidation of 3‐methylpyridine to 3‐pyridinemethanol, 3‐pyridinemethanal and vitamin B3 in water under UVA irradiation. The best performance was found with the electrode prepared in ethylene glycol/water/NH4F (98/2/0.3 w/w) medium at 36 V potential for 3 h, while the worst was that prepared in aqueous medium which showed the shortest nanostructure length. Unlike photoelectrocatalysis and photocatalysis, no aromatic alcohol/carbonyl products were obtained in electrocatalytic and photolytic experiments. The selectivity values of the products were similar for the various electrodes, while the morphology of the nanotubes/nanowires and their quantity which affects the total active surface area were essential for the substrate conversion. The results also show that the photocurrent intensity, XRD peak intensity, and electrical conductivity are correlated with photoelectrocatalytic activity of the Ti/TiO2 electrodes.
- 15 July 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (18)
Open AccessPartial Photoelectrocatalytic Oxidation of 3‐Methylpiridine in Green Conditions by Nanotube/Nanowire Ti/TiO2 Plates Prepared in Aqueous, Glycerol, or Ethylene Glycol Medium
Nanotube/nanowire structured TiO2 samples on Ti plates were prepared by anodic oxidation in aqueous, glycerol or ethylene glycol medium under different experimental conditions and characterized by XRD, SEM‐EDX, electrochemical methods (photocurrent profiles and electrochemical impedance spectroscopy). The nanostructured TiO2 was built on relatively large Ti plates, and consequently, in some preparation conditions, different morphologic properties were observed in the underside and upside zones of the electrodes, especially in ethylene glycol medium. The electrodes were tested for selective photoelectrocatalytic oxidation of 3‐methylpyridine to 3‐pyridinemethanol, 3‐pyridinemethanal and vitamin B3 in water under UVA irradiation. The best performance was found with the electrode prepared in ethylene glycol/water/NH4F (98/2/0.3 w/w) medium at 36 V potential for 3 h, while the worst was that prepared in aqueous medium which showed the shortest nanostructure length. Unlike photoelectrocatalysis and photocatalysis, no aromatic alcohol/carbonyl products were obtained in electrocatalytic and photolytic experiments. The selectivity values of the products were similar for the various electrodes, while the morphology of the nanotubes/nanowires and their quantity which affects the total active surface area were essential for the substrate conversion. The results also show that the photocurrent intensity, XRD peak intensity, and electrical conductivity are correlated with photoelectrocatalytic activity of the Ti/TiO2 electrodes.
- Open Access
- 4 February 2024
- Published by The Turkish Chemical Society in Journal of the Turkish Chemical Society Section A: Chemistry
- Vol. 11 (1) , 55-70
Voltammetric performance of nanofiber structured over-oxidized poly(3,4-ethylenedioxythiophene) modified pencil graphite electrodes for dobutamine sensing
A modified electrode was developed for the electrochemical sensing of dobutamine (DBT), one of the catecholamines. For this modification process, pencil graphite electrodes (PGE) were modified with over-oxidized nanofiber structured poly (3,4-ethylenedioxythiophene) (PGE/OPEDOTNF) by electropolymerization. The electrochemical performance of PGE/OPEDOTNF was evaluated by cyclic and differential pulse voltammetry. In addition, the performances of non-nanofiber PEDOT-modified PGE electrodes were also examined for comparison. The characterization of the modified electrodes was carried out by scanning electron microscopy and electrochemical methods. The signal of the modified electrodes was observed in a linear range of 0.1-2.0 µM against DBT using the differential pulse voltammetry method. The limit of detection and quantification are calculated as 0.026 µM and 0.086 µM, respectively. The effect of the interfering species was examined. It has been shown that DBT can be detected sensitively and selectively using pencil graphite electrodes modified with nanofiber-structured poly(3,4-ethylenedioxythiophene). The repeatability of PGE/OPEDOTNF electrodes was found to be 5.2%. PGE/OPEDOTNF electrodes remained stable for 15 days without losing their electrochemical activity.
- 4 February 2024
- Published by The Turkish Chemical Society in Journal of the Turkish Chemical Society Section A: Chemistry
- Vol. 11 (1) , 55-70
Open AccessVoltammetric performance of nanofiber structured over-oxidized poly(3,4-ethylenedioxythiophene) modified pencil graphite electrodes for dobutamine sensing
A modified electrode was developed for the electrochemical sensing of dobutamine (DBT), one of the catecholamines. For this modification process, pencil graphite electrodes (PGE) were modified with over-oxidized nanofiber structured poly (3,4-ethylenedioxythiophene) (PGE/OPEDOTNF) by electropolymerization. The electrochemical performance of PGE/OPEDOTNF was evaluated by cyclic and differential pulse voltammetry. In addition, the performances of non-nanofiber PEDOT-modified PGE electrodes were also examined for comparison. The characterization of the modified electrodes was carried out by scanning electron microscopy and electrochemical methods. The signal of the modified electrodes was observed in a linear range of 0.1-2.0 µM against DBT using the differential pulse voltammetry method. The limit of detection and quantification are calculated as 0.026 µM and 0.086 µM, respectively. The effect of the interfering species was examined. It has been shown that DBT can be detected sensitively and selectively using pencil graphite electrodes modified with nanofiber-structured poly(3,4-ethylenedioxythiophene). The repeatability of PGE/OPEDOTNF electrodes was found to be 5.2%. PGE/OPEDOTNF electrodes remained stable for 15 days without losing their electrochemical activity.
- Open Access
- 1 January 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (3) , 694-701
Sulu Ortamda Anodik Yükseltgenmeyle Elde Edilen Nanotüp Yapılı TiO2 Elektrotların Fotoelektrokimyasal Performansı
Levha halindeki titanyum metalinin yüzeyinde iki farklı yöntemle TiO2 oluşturulmuştur. Kullanılan ilk yöntem termal yükseltgenme ikincisi ise anodik yükseltgenmedir. Termal yükseltgenme ile TiO2 eldesi, Ti levhanın hava ortamında laboratuvar fırınında 3 saat ısıtılmasıyla gerçekleştirilmiştir. Anodik yükseltgenme HF içeren sulu elektrolit içerisinde 20 V sabit gerilimin Ti levhaya uygulanmasıyla yapılmıştır. Anodik yükseltgeme yöntemi ile Ti levha yüzeyinde nanotüp yapılı amorf TiO2 elde edilmektedir. Amorf yapının kristallenmesi için hava ortamında laboratuvar fırınında 3 saat ısıtma uygulanmıştır. Her iki yöntemde de elektrotlar 400, 500, 550, 600, 650 ve 700 °C’de ısıl muameleye tabi tutulmuştur. Elde edilen elektrotlar XRD ve SEM yöntemleri kullanılarak karakterize edilmiştir. XRD sonuçları, 500 °C’ye kadar kalsine edilen elektrotların yüzeyindeki TiO2’nin çoğunun amorf yapıda olduğunu, 600 °C ve daha yüksek sıcaklıklarda kalsine edilenlerin çok büyük oranda kristal yapıda olduğunu göstermiştir. Hazırlanan elektrotların 0,5 M Na2SO4 çözeltisinde UV ışığı altında fotoakım değerleri ölçülmüş ve fotoelektrokimyasal performansları karşılaştırmalı olarak incelenmiştir. Farklı yöntemler kullanılarak ve farklı sıcaklıklarda elde edilen elektrotların performansları karşılaştırıldığında en yüksek fotoakım değeri, Ti levha yüzeyinde 20 dakikalık anodik yükseltgemeyle üretilen ve 650 °C’de kalsine edilen elektrotla (TiNT-HF-650-20dk) elde edilmiştir. Anodik yükseltgenme yöntemiyle hazırlanan nanotüp yapılı TiO2’nin UV ışığı altında elde edilen fotoakım değerinin termal yükseltgenme ile elde edilene kıyasla 1,5 kata yakın daha yüksek olduğu belirlenmiştir. 20 dakikalık kısa bir sürede anodik yükseltgenme ile sulu ortamda nanotüp yapılı olarak elde edilebilen TiO2 elektrodunun fotoelektrokimyasal performansında kayda değer bir iyileşme olduğu belirlenmiştir.
- 1 January 2024
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 24 (3) , 694-701
Open AccessSulu Ortamda Anodik Yükseltgenmeyle Elde Edilen Nanotüp Yapılı TiO2 Elektrotların Fotoelektrokimyasal Performansı
Levha halindeki titanyum metalinin yüzeyinde iki farklı yöntemle TiO2 oluşturulmuştur. Kullanılan ilk yöntem termal yükseltgenme ikincisi ise anodik yükseltgenmedir. Termal yükseltgenme ile TiO2 eldesi, Ti levhanın hava ortamında laboratuvar fırınında 3 saat ısıtılmasıyla gerçekleştirilmiştir. Anodik yükseltgenme HF içeren sulu elektrolit içerisinde 20 V sabit gerilimin Ti levhaya uygulanmasıyla yapılmıştır. Anodik yükseltgeme yöntemi ile Ti levha yüzeyinde nanotüp yapılı amorf TiO2 elde edilmektedir. Amorf yapının kristallenmesi için hava ortamında laboratuvar fırınında 3 saat ısıtma uygulanmıştır. Her iki yöntemde de elektrotlar 400, 500, 550, 600, 650 ve 700 °C’de ısıl muameleye tabi tutulmuştur. Elde edilen elektrotlar XRD ve SEM yöntemleri kullanılarak karakterize edilmiştir. XRD sonuçları, 500 °C’ye kadar kalsine edilen elektrotların yüzeyindeki TiO2’nin çoğunun amorf yapıda olduğunu, 600 °C ve daha yüksek sıcaklıklarda kalsine edilenlerin çok büyük oranda kristal yapıda olduğunu göstermiştir. Hazırlanan elektrotların 0,5 M Na2SO4 çözeltisinde UV ışığı altında fotoakım değerleri ölçülmüş ve fotoelektrokimyasal performansları karşılaştırmalı olarak incelenmiştir. Farklı yöntemler kullanılarak ve farklı sıcaklıklarda elde edilen elektrotların performansları karşılaştırıldığında en yüksek fotoakım değeri, Ti levha yüzeyinde 20 dakikalık anodik yükseltgemeyle üretilen ve 650 °C’de kalsine edilen elektrotla (TiNT-HF-650-20dk) elde edilmiştir. Anodik yükseltgenme yöntemiyle hazırlanan nanotüp yapılı TiO2’nin UV ışığı altında elde edilen fotoakım değerinin termal yükseltgenme ile elde edilene kıyasla 1,5 kata yakın daha yüksek olduğu belirlenmiştir. 20 dakikalık kısa bir sürede anodik yükseltgenme ile sulu ortamda nanotüp yapılı olarak elde edilebilen TiO2 elektrodunun fotoelektrokimyasal performansında kayda değer bir iyileşme olduğu belirlenmiştir.
- 1 November 2021
- Published by Elsevier in Catalysis Today
- Vol. 380, 248-258
Partial photoelectrocatalytic oxidation of 3-pyridinemethanol by Pt, Au and Pd loaded TiO2 nanotubes on Ti plate
- 1 November 2021
- Published by Elsevier in Catalysis Today
- Vol. 380, 248-258
Partial photoelectrocatalytic oxidation of 3-pyridinemethanol by Pt, Au and Pd loaded TiO2 nanotubes on Ti plate
- 11 November 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (1) , 124-137
Photoelectrocatalytic oxidation of 3-pyridinemethanol to 3-pyridinemethanal and vitamin B3 by TiO2 nanotubes
In this paper, the first photoelectrocatalytic 3-pyridinemethanol oxidation to 3-pyridinemethanal and vitamin B3 was investigated.
- 11 November 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (1) , 124-137
Photoelectrocatalytic oxidation of 3-pyridinemethanol to 3-pyridinemethanal and vitamin B3 by TiO2 nanotubes
In this paper, the first photoelectrocatalytic 3-pyridinemethanol oxidation to 3-pyridinemethanal and vitamin B3 was investigated.
- Open Access
Photoelectrocatalytic Degradation of Paraquat by Pt Loaded TiO2 Nanotubes on Ti Anodes
Nanotube structured TiO2 on Ti surface were prepared in ethylene glycol (Ti/TiO2NTEG) medium by anodic oxidation method with different times and then the plates were calcinated at different temperatures. Non-nanotube structured Ti/TiO2, prepared by thermal oxidation method, and nanotube structured TiO2 on Ti plate in hydrogen fluoride solution were also prepared for comparison. Pt loaded Ti/TiO2NTEG photoanodes were also prepared by cyclic voltammetry method with different cycles and the optimum loaded Pt amount was determined. Photoanodes were characterized by using X-ray Diffraction (XRD), Scanning Electron Microscopy-Energy-Dispersive X-ray Analysis (SEM-EDX), and photocurrent methods. XRD analyses proved that almost all TiO2 is in anatase phase. SEM analyses show that nanotubes and Pt nanoparticles on nanotube surface are dispersed quite homogeneously. The longest nanotubes were obtained in the ethylene glycol medium and the nanotube length increased by increasing applied anodic oxidation time. In addition, a linear correlation between nanotube length and XRD peak intensity was found. Moreover, SEM-EDX and XRD analyses evidence that Pt nanoparticles on nanotube surface are metallic and in cubic structure. Photoelectrocatalytic degradation of paraquat was performed using the prepared photoanodes. Moreover, electrocatalytic and photocatalytic degradations of paraquat were also investigated for comparison, however lower activities were observed. These results evidence that the photoanodes show a significant synergy for photoelectrocatalytic activity.
Open AccessPhotoelectrocatalytic Degradation of Paraquat by Pt Loaded TiO2 Nanotubes on Ti Anodes
Nanotube structured TiO2 on Ti surface were prepared in ethylene glycol (Ti/TiO2NTEG) medium by anodic oxidation method with different times and then the plates were calcinated at different temperatures. Non-nanotube structured Ti/TiO2, prepared by thermal oxidation method, and nanotube structured TiO2 on Ti plate in hydrogen fluoride solution were also prepared for comparison. Pt loaded Ti/TiO2NTEG photoanodes were also prepared by cyclic voltammetry method with different cycles and the optimum loaded Pt amount was determined. Photoanodes were characterized by using X-ray Diffraction (XRD), Scanning Electron Microscopy-Energy-Dispersive X-ray Analysis (SEM-EDX), and photocurrent methods. XRD analyses proved that almost all TiO2 is in anatase phase. SEM analyses show that nanotubes and Pt nanoparticles on nanotube surface are dispersed quite homogeneously. The longest nanotubes were obtained in the ethylene glycol medium and the nanotube length increased by increasing applied anodic oxidation time. In addition, a linear correlation between nanotube length and XRD peak intensity was found. Moreover, SEM-EDX and XRD analyses evidence that Pt nanoparticles on nanotube surface are metallic and in cubic structure. Photoelectrocatalytic degradation of paraquat was performed using the prepared photoanodes. Moreover, electrocatalytic and photocatalytic degradations of paraquat were also investigated for comparison, however lower activities were observed. These results evidence that the photoanodes show a significant synergy for photoelectrocatalytic activity.