Hyo Sik Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hyo Sik Yoon has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Kang Ryoung Park
Division of Electronics and Electrical Engineering, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 04620, Republic of Korea
4 shared publications - Jin Kyu Kang
Division of Electronics and Electrical Engineering, Dongguk University, Seoul, South Korea
2 shared publications - Min Beom Lee
Division of Electronics and Electrical Engineering, Dongguk University, Seoul, South Korea
2 shared publications - Dat Tien Nguyen
Faculty of Electrical and Electronic Engineering, Phenikaa University, Yen Nghia, Ha Dong, Hanoi 12116, Vietnam
1 shared publication - Ganbayar Batchuluun
Division of Electronics and Electrical Engineering, Dongguk University, 30 Pildong-ro 1gil, Jung-gu, Seoul 04620, Republic of Korea
1 shared publication - Tuyen Danh Pham
IT Department, FPT University, Hanoi 11312, Vietnam
1 shared publication
Latest Publications
- Open Access
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 12055-12066
AS-RIG: Adaptive Selection of Reconstructed Input by Generator or Interpolation for Person Re-Identification in Cross-Modality Visible and Thermal Images
Multimodal camera-based person re-identification (ReID) is important in the field of intelligent surveillance. Thermal cameras can solve the problem in that visible-light cameras cannot acquire the valid feature information of a person under poor illumination conditions. However, thermal cameras usually have lower frame resolution than visible-light cameras. To overcome this problem, we propose an adaptive selection of reconstructed input by generator or interpolation (AS-RIG) method, which can adaptively select the generative adversarial network (GAN), or an interpolation method (bi-linear or bi-cubic). AS-RIG automatically selects a resolution-model using the mean-squared error (MSE), feature distance (FD), and structural similarity (SSIM). To verify the performance of our proposed method, two open databases are used: the DBPerson-Recog-DB1 and Sun Yat-set University multiple modality Re-ID (SYSU-MM01). Infrared frames from both databases are resized to be smaller than the original ones for experimentation. Experimental results show that our generator outperforms traditional interpolation methods. In addition, the person ReID experimental results demonstrate that AS-RIG outperforms non-adaptive selection methods and state-of-the-art methods.
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 12055-12066
Open AccessAS-RIG: Adaptive Selection of Reconstructed Input by Generator or Interpolation for Person Re-Identification in Cross-Modality Visible and Thermal Images
Multimodal camera-based person re-identification (ReID) is important in the field of intelligent surveillance. Thermal cameras can solve the problem in that visible-light cameras cannot acquire the valid feature information of a person under poor illumination conditions. However, thermal cameras usually have lower frame resolution than visible-light cameras. To overcome this problem, we propose an adaptive selection of reconstructed input by generator or interpolation (AS-RIG) method, which can adaptively select the generative adversarial network (GAN), or an interpolation method (bi-linear or bi-cubic). AS-RIG automatically selects a resolution-model using the mean-squared error (MSE), feature distance (FD), and structural similarity (SSIM). To verify the performance of our proposed method, two open databases are used: the DBPerson-Recog-DB1 and Sun Yat-set University multiple modality Re-ID (SYSU-MM01). Infrared frames from both databases are resized to be smaller than the original ones for experimentation. Experimental results show that our generator outperforms traditional interpolation methods. In addition, the person ReID experimental results demonstrate that AS-RIG outperforms non-adaptive selection methods and state-of-the-art methods.
- Open Access
- 11 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 10120-10135
Enhanced Iris Recognition Method by Generative Adversarial Network-Based Image Reconstruction
Iris recognition is one of the non-contact biometric identification methods that are hygienic and highly accurate. Iris recognition involves using iris images obtained by a near-infrared (NIR) camera or a visible light camera. A clear image of iris can be obtained when an NIR camera is used, but it requires an NIR illuminator in addition to the NIR camera. Iris recognition can be performed with a built-in camera device when a visible light camera is used, which also has the advantage of obtaining a three-channel image containing the color information. Accordingly, studies are being conducted on iris recognition by obtaining iris images from the face images taken by a high-resolution visible light camera in smartphones. However, when iris images have unconstrained conditions or are obtained without the cooperation of the subjects, the quality of iris images are reduced by noises such as optical and motion blur, off-angle view, specular reflection (SR), and other artifacts, thus ultimately deteriorating the recognition performance. Therefore, in this study, a method has been proposed for enhancing the quality of iris images by blurring the iris region and deep-learning-based deblurring. In addition, we propose the method for improving the recognition performance by integrating the recognition score in periocular regions and support vector machine (SVM). The method proposed in this study, which was experimented with noisy iris challenge evaluation-part II training database and MICHE database, exhibited an improved performance compared to the state-of-the-art methods.
- 11 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 10120-10135
Open AccessEnhanced Iris Recognition Method by Generative Adversarial Network-Based Image Reconstruction
Iris recognition is one of the non-contact biometric identification methods that are hygienic and highly accurate. Iris recognition involves using iris images obtained by a near-infrared (NIR) camera or a visible light camera. A clear image of iris can be obtained when an NIR camera is used, but it requires an NIR illuminator in addition to the NIR camera. Iris recognition can be performed with a built-in camera device when a visible light camera is used, which also has the advantage of obtaining a three-channel image containing the color information. Accordingly, studies are being conducted on iris recognition by obtaining iris images from the face images taken by a high-resolution visible light camera in smartphones. However, when iris images have unconstrained conditions or are obtained without the cooperation of the subjects, the quality of iris images are reduced by noises such as optical and motion blur, off-angle view, specular reflection (SR), and other artifacts, thus ultimately deteriorating the recognition performance. Therefore, in this study, a method has been proposed for enhancing the quality of iris images by blurring the iris region and deep-learning-based deblurring. In addition, we propose the method for improving the recognition performance by integrating the recognition score in periocular regions and support vector machine (SVM). The method proposed in this study, which was experimented with noisy iris challenge evaluation-part II training database and MICHE database, exhibited an improved performance compared to the state-of-the-art methods.
- Open Access
- 27 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 137418-137437
CycleGAN-Based Deblurring for Gaze Tracking in Vehicle Environments
Recently, the need for research on tracking driver gazes is increasing owing to the development of driver convenience systems, such as autonomous driving or intelligent driver monitoring system, to address traffic accidents caused by negligence. A camera is installed in a vehicle to track the driver’s gaze in vehicle environment. The accuracy of estimating driver gazes in vehicle environments reduces if a motion blur of the driver occurs, owing to vehicular vibrations during driving. Most past studies on gaze-tracking of a driver in a vehicle did not consider the motion blurs in their experiments. To address this concern, we propose a method for improving the accuracy of gaze estimation by deblurring the blurred images of a driver from the vehicle. This study is the first attempt to calculate a driver’s gaze by deblurring a motion blurred image with CycleGAN, whereas simultaneously using the image information from the two cameras in the vehicle. In previous studies, multiple deep CNNs were used for obtaining the images of a driver’s eyes and face. In this study, information obtained from the two cameras in the vehicle are integrated into an image with three channels and thereafter deblurred, consequently reducing the time required for training. Whereas in previous studies the gaze position was not calculated for severe blurs by measuring the level of blur from the input image, the gaze position was calculated for all the input images in this study. From the database (Dongguk blurred gaze database (DBGD)) from 26 drivers in actual vehicles and the Columbia gaze dataset (CAVE-DB) that is an open database, the proposed method exhibited greater accuracy than the existing methods.
- 27 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 137418-137437
Open AccessCycleGAN-Based Deblurring for Gaze Tracking in Vehicle Environments
Recently, the need for research on tracking driver gazes is increasing owing to the development of driver convenience systems, such as autonomous driving or intelligent driver monitoring system, to address traffic accidents caused by negligence. A camera is installed in a vehicle to track the driver’s gaze in vehicle environment. The accuracy of estimating driver gazes in vehicle environments reduces if a motion blur of the driver occurs, owing to vehicular vibrations during driving. Most past studies on gaze-tracking of a driver in a vehicle did not consider the motion blurs in their experiments. To address this concern, we propose a method for improving the accuracy of gaze estimation by deblurring the blurred images of a driver from the vehicle. This study is the first attempt to calculate a driver’s gaze by deblurring a motion blurred image with CycleGAN, whereas simultaneously using the image information from the two cameras in the vehicle. In previous studies, multiple deep CNNs were used for obtaining the images of a driver’s eyes and face. In this study, information obtained from the two cameras in the vehicle are integrated into an image with three channels and thereafter deblurred, consequently reducing the time required for training. Whereas in previous studies the gaze position was not calculated for severe blurs by measuring the level of blur from the input image, the gaze position was calculated for all the input images in this study. From the database (Dongguk blurred gaze database (DBGD)) from 26 drivers in actual vehicles and the Columbia gaze dataset (CAVE-DB) that is an open database, the proposed method exhibited greater accuracy than the existing methods.
- Open Access
- 4 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 174597-174611
A Study on the Elimination of Thermal Reflections
Recently, thermal cameras have been used in various surveillance and monitoring systems. In particular, in camera-based surveillance systems, algorithms are being developed for detecting and recognizing objects from images acquired in dark environments. However, it is difficult to detect and recognize an object due to the thermal reflections generated in the image obtained from a thermal camera. For example, thermal reflection often occurs on a structure or the floor near an object, similar to shadows or mirror reflections. In this case, the object and the areas of thermal reflection overlap or are connected to each other and are difficult to separate. Thermal reflection also occurs on nearby walls, which can be detected as artifacts when an object is not associated with this phenomenon. In addition, the size and pixel value of the thermal reflection area vary greatly depending on the material of the area and the environmental temperature. In this case, the patterns and pixel values of the thermal reflection and the object are similar to each other and difficult to differentiate. These problems reduce the accuracy of object detection and recognition methods. In addition, no studies have been conducted on the elimination of thermal reflection of objects under different environmental conditions. Therefore, to address these challenges, we propose a method of detecting reflections in thermal images based on deep learning and their elimination via post-processing. Experiments using a self-collected database (Dongguk thermal image database (DTh-DB), Dongguk items and vehicles database (DI&V-DB)) and an open database showed that the performance of the proposed method is superior compared to that of other state-of-the-art approaches.
- 4 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 174597-174611
Open AccessA Study on the Elimination of Thermal Reflections
Recently, thermal cameras have been used in various surveillance and monitoring systems. In particular, in camera-based surveillance systems, algorithms are being developed for detecting and recognizing objects from images acquired in dark environments. However, it is difficult to detect and recognize an object due to the thermal reflections generated in the image obtained from a thermal camera. For example, thermal reflection often occurs on a structure or the floor near an object, similar to shadows or mirror reflections. In this case, the object and the areas of thermal reflection overlap or are connected to each other and are difficult to separate. Thermal reflection also occurs on nearby walls, which can be detected as artifacts when an object is not associated with this phenomenon. In addition, the size and pixel value of the thermal reflection area vary greatly depending on the material of the area and the environmental temperature. In this case, the patterns and pixel values of the thermal reflection and the object are similar to each other and difficult to differentiate. These problems reduce the accuracy of object detection and recognition methods. In addition, no studies have been conducted on the elimination of thermal reflection of objects under different environmental conditions. Therefore, to address these challenges, we propose a method of detecting reflections in thermal images based on deep learning and their elimination via post-processing. Experiments using a self-collected database (Dongguk thermal image database (DTh-DB), Dongguk items and vehicles database (DI&V-DB)) and an open database showed that the performance of the proposed method is superior compared to that of other state-of-the-art approaches.