YCYuhan Chen

Yuhan Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuhan Chen has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Kinematic Analysis of 3-PPPS Parallel Manipulator with Inclined Passive Prismatic Joints

    by Bowen Wang, Fan Bu, Haoran Cui, Junhui Zhu, Yuhan Chen, Xinyu Liu

    This paper addresses the challenge of solving the coupled forward kinematics (FK) and singularity boundaries of a 3-PPPS parallel manipulator with inclined passive prismatic joints. To simplify the kinematic modeling, the inherently 8th-order FK problem is first reduced to three quadratic constraint equations by formulating closed-loop constraints. Subsequently, higher-order iterative algorithms, namely Halley’s Method (HM) and Super-Halley’s Method (SHM), are introduced with an analytical initial guess. We prove the exact equivalence between one SHM iteration and two Newton-Raphson iterations, and show that HM offers higher stability by utilizing exact Hessian information. Next, a concise quaternion-based Jacobian determinant reveals that the singularity-free orientation workspace is bounded by its maximum inscribed sphere in both quaternion and XYZ Euler-angle spaces. These boundaries are determined by the nearest FK singularity, which occurs when the axes of the passive joints are orthogonal to the moving platform. Finally, MATLAB and C++ benchmarks are performed to validate the analytical derivations and algorithmic performance. The results show that the HM guarantees a 100% success rate, and the SHM achieves efficiency with a median execution time of 3.6 μs.

  • Open Access

    Metrology-Assisted Constraint-preserving Kinematic Calibration of Hybrid and Parallel Micro-Nano Positioning Robots

    by Wuduan Zhao, Sirui Li, Zishuai Yan, Yuhan Chen, Changsheng Dai

    Calibrating hybrid and parallel micro-nano positioning robots requires measured pose errors to be transferred to identifiable geometric quantities without violating closed-loop compatibility or the equality of components shared among kinematic paths. Existing projection and rank-reduction methods do not generally distinguish physical-sharing constraints, unmeasured passive-state directions, and measurement-null parameter directions within one model. This paper develops a metrology-assisted, constraint-preserving framework based on local product-of-exponentials kinematics represented by unit dual quaternions (UDQs). A digital holographic microscope and a pseudo-periodic encoded target provide local six-degree-of-freedom pose measurements. Binary assembly maps first assign one global variable to each physical component, and a limb-incidence operator expresses loop compatibility. A full-SVD left-null-space projection then eliminates passive-coordinate perturbations without constraint-matrix inversion; a second SVD constructs rank-minimal observable coordinates within the retained physical-sharing manifold. The same projected feasible space defines a damped active-joint update and separates compensable from irreducible task errors. On a 6-DOF parallel and a 5-DOF hybrid platform, 100 measured poses per platform were divided into 50 identification and 50 held-out poses within one continuous out-of-plane window. Mean held-out position/orientation residuals were 1.25 μm/28.3 μrad and 17.1 μm/354 μrad, respectively. Relative to an algebraically matched homogeneous-transformation-matrix implementation, UDQ reduced identification runtime by 23.1%-23.5%; a 1000-pose numerical timing study showed a 13.0%-20.0% reduction in compensation time. The evidence supports local cross-architecture predictive consistency and representation-level efficiency, but not independently traceable absolute or measured post-compensation accuracy.

  • A Fifth-Order POE-Based Method for Kinematic Identification and Inverse Kinematics of Serial Robots

    by Yuhan Chen, Yunkai Wang, Fan Bu, Guiyang Xin, Changsheng Dai, Xingjian Liu, Yu Sun, Xinyu Liu

    Current numerical methods for solving kinematic identification (KI) and inverse kinematics (IK) are limited in accuracy, convergence rates, and robustness, necessitating further enhancement. This paper presents a modified Halley method for solving the KI and IK problems of serial robots based on the product of exponentials formula, achieving quintic convergence. Specifically, a general error model is first established based on exponential coordinates, and KI and IK are reformulated as root-finding problems. Next, the modified Halley method, which we prove to be a fifth-order method and incorporates a damping strategy, is proposed to resolve the singularity issue and enhance robustness. Subsequently, the Jacobian and Hessian matrices required for the proposed method are analytically derived based on the time differential of exponentials. Furthermore, highly simplified explicit formulas for these matrices are presented for the IK problem. Simulations on serial robots with various configurations validate the proposed method's accuracy, convergence rates, and robustness in solving KI and IK problems, as well as its advantages over the state-of-the-art. Additionally, experimental validation of KI on two physical robots further demonstrates the effectiveness of the proposed method. Our custom-written MATLAB and C++ codebases are made publicly available for download.


  • Adaptive Load-Dependent Sim2Real Framework for Path Tracking Toward Tendon-Driven Continuum Robots

    by Shilong Yao, Peiyu Luo, Yiyao Yue, Yuhan Chen, Hong Yan, Max Q.-H. Meng

    Continuum robots (CRs) are crucial for executing intricate tasks in constrained anatomical spaces. However, challenges such as actuator latency, backlash, and tendon pretensioning can limit their effectiveness. In this article, we introduce an adaptive load-dependent simulation to the real-world framework for path tracking in tendon-driven CRs, essential for enhancing the dexterity and precision required in minimally invasive surgical procedures. We propose a fixed-pose inverse kinematics control method integrating virtual degrees of freedom into end-effector planning to facilitate six-dof navigation. Then, it establishes a relationship between overall tendon loading and motor actuation, paving the way for employing the learning-based neural network for accurate calibration of the robot's physical model, enabling arbitrary trajectory tracking without the need for external shape-sensing sensors. Our method maintains a maximum 3-D root-mean-square error (RMSE) of 5.01 mm across diverse trajectory types, achieving a directional discrepancy RMSE of 0.114 radians. This demonstrates a significant improvement in tracking accuracy, reducing tracking errors by 86.1% compared to the noncompensated approach. The findings of this study highlight the potential of our approach to bridge the gap between simulation and real-world applications, ultimately enhancing operational efficiency and patient outcomes in robotic-assisted surgeries.


  • Robotic Repositioning of Photoacoustic Tomography for Reproducible Long-Term Monitoring of Peripheral Artery In Vivo

    by Yongjian Zhao, Handi Deng, Xianghu Yu, Yisong Zhao, Ao Xu, Yuhan Chen, Cheng Ma, Li Liu

    This paper presents a robotic arm assisted photoacoustic tomography imager that employs a direct visual servoing-enabled repositioning strategy designed for reproducible surveillance of peripheral arterial disease (PAD) progression. The system ensures precise repositioning of the cross-sectional location of the vessel of interest, allowing consistent measurements to track PAD progression and response to treatment. This strategy overcomes the difficulty of obtaining cross-sectional images of the same vessel at different monitoring intervals due to operator variability. In addition, the acquisition of high-resolution, high-contrast vessel images helps to clearly delineate long-term changes in the vasculature. To evaluate the effectiveness of the proposed experimental configurations and algorithms, we performed two sets of vascular phantom experiments and one set of servo-imaging experiments on human lower extremity vessels. The experimental results show 100% similarity for all three sets of grid segmentation comparisons, while the pixel-wise comparison similarity is 99.3% for the first set, 97.4% for the second set, and 98.9% for the in vivo experimental set. These results are important for monitoring the progression of PAD and predicting the risk of cardiovascular disease.


  • Direct Visual Servoing Based on Discrete Orthogonal Moments

    by Yuhan Chen, Max Qing-Hu Meng, Li Liu

    This paper proposes a new approach to achieve direct visual servoing (DVS) based on discrete orthogonal moments (DOMs). DVS is performed in such a way that the extraction of geometric primitives, matching, and tracking steps in the conventional feature-based visual servoing pipeline can be bypassed. Although DVS enables highly precise positioning, it suffers from a limited convergence domain and poor robustness due to the extreme nonlinearity of the cost function to be minimized and the presence of redundant data between visual features. To tackle these issues, we propose a generic and augmented framework that considers DOMs as visual features. By using the Tchebichef, Krawtchouk, and Hahn moments as examples, we not only present the strategies for adaptively tuning the parameters and order of the visual features but also exhibit an analytical formulation of the associated interaction matrix. Simulations demonstrate the robustness and accuracy of our approach, as well as its advantages over the state-of-the-art. Real-world experiments have also been performed to validate the effectiveness of our approach.


  • Chained Spatial Beam Constraint Model: A General Kinetostatic Model for Tendon-Driven Continuum Robots

    by Yuhan Chen, Shilong Yao, Max Q.-H. Meng, Li Liu

    The profile estimation for continuum robots is a crucial problem concerning automatically controlling robots. The conventional method is based on the Cosserat rod theory, which is limited by the dependence of the convergence on the initial guess and computational complexity. To tackle these issues, this article proposes a general kinetostatic model to estimate the profile of the tendon-driven continuum robot (TDCR). We first abstract the backbone of the TDCR as an Euler–Bernoulli beam and then derive the spatial beam constraint model of a circular cross-section beam without considering torsion and shear. Next, taking a single-section TDCR as an example, we provide comprehensive modeling, considering the driving tendon tensions, friction, gravity, and external forces. Subsequently, an algorithm based on the chained spatial beam constraint model is proposed to estimate the robot's profile. The method can be generalized to the TDCR with different configurations. Simulations demonstrate the accuracy, computational efficiency, and computational success rate of our method, as well as its advantages over the state-of-the-art. Real-world experiments have also been performed to validate the effectiveness of our method with three different configurations of the TDCR.