Andre Weiner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andre Weiner has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Richard Semaan
Institute of Fluid Mechanics, Technische Universität Braunschweig, Brunswick, Germany
3 shared publications - Sebastian Spinner
DLR German Aerospace Center 38108 Braunschweig Germany
2 shared publications Christian Breitsamter
1 shared publication- Christian Breitsamter
Chair of Aerodynamics and Fluid Mechanics, School of Engineering and Design, Technical University of Munich, 85748 Garching b. München, Germany
1 shared publication Claire Claassen
Technische Universiteit Eindhoven
1 shared publicationClaire M. Y. Claassen
Multiphase Reactors Group, Department of Chemical Engineering and Chemistry Eindhoven University of Technology Eindhoven The Netherlands
1 shared publication
Latest Publications
- Open Access
- 17 August 2026
- Published by Elsevier in Computers & Fluids
- Vol. 319
An octree-based sampling algorithm for analyzing big simulation data
- 17 August 2026
- Published by Elsevier in Computers & Fluids
- Vol. 319
Open AccessAn octree-based sampling algorithm for analyzing big simulation data
- Open Access
- 27 July 2026
- Published by Elsevier in SSRN Electronic Journal
Frequency and Amplitude Influence of Forced Wing Motion of a Transport Aircraft on Transonic Buffet
Transonic shock buffet poses a significant aeroelastic constraint for modern transport aircraft, yet the underlying three-dimensional flow dynamics on fully equipped configurations remain highly complex and not fully understood. This study investigates the transonic buffet and forced buffeting behaviour of the XRF-1 transport aircraft, featuring an Ultra-High Bypass Ratio (UHBR) nacelle, under deep buffet conditions ($Ma_{\infty} = 0.84$, $\mathrm{Re}_{\infty} = 25 \times 10^{6}$ and $\alpha = 4.5^\circ$). The unforced aerodynamic baseline is established using computational fluid dynamics (CFD) and validated against wind-tunnel measurements, including discrete pressure probes and unsteady pressure-sensitive paint (iPSP). To identify and track coherent flow structures, the surface pressure fields are analyzed using the adaptive multi-taper Spectral Proper Orthogonal Decomposition (AMSPOD) method. The numerical baseline demonstrates strong agreement with the experimental data, accurately capturing the primary outboard-propagating buffet modes. Building on this validation, the aerodynamic response to forced wing motions is examined by exciting the structure in symmetric ($\mathrm{Sr} = 0.164$, 4n) and asymmetric ($\mathrm{Sr} = 0.212$, 5n) wing bending eigenmodes at varying amplitudes. The results reveal a highly nonlinear flow-structure interaction characterized by frequency lock-in like behaviour, which predominantly synchronizes near the higher harmonics of the structural forcing. Further, it is shown that high-amplitude structural excitation does not amplify the natural instabilities; rather, it induces an attenuation and frequency shift of the baseline buffet modes.- 27 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFrequency and Amplitude Influence of Forced Wing Motion of a Transport Aircraft on Transonic Buffet
Transonic shock buffet poses a significant aeroelastic constraint for modern transport aircraft, yet the underlying three-dimensional flow dynamics on fully equipped configurations remain highly complex and not fully understood. This study investigates the transonic buffet and forced buffeting behaviour of the XRF-1 transport aircraft, featuring an Ultra-High Bypass Ratio (UHBR) nacelle, under deep buffet conditions ($Ma_{\infty} = 0.84$, $\mathrm{Re}_{\infty} = 25 \times 10^{6}$ and $\alpha = 4.5^\circ$). The unforced aerodynamic baseline is established using computational fluid dynamics (CFD) and validated against wind-tunnel measurements, including discrete pressure probes and unsteady pressure-sensitive paint (iPSP). To identify and track coherent flow structures, the surface pressure fields are analyzed using the adaptive multi-taper Spectral Proper Orthogonal Decomposition (AMSPOD) method. The numerical baseline demonstrates strong agreement with the experimental data, accurately capturing the primary outboard-propagating buffet modes. Building on this validation, the aerodynamic response to forced wing motions is examined by exciting the structure in symmetric ($\mathrm{Sr} = 0.164$, 4n) and asymmetric ($\mathrm{Sr} = 0.212$, 5n) wing bending eigenmodes at varying amplitudes. The results reveal a highly nonlinear flow-structure interaction characterized by frequency lock-in like behaviour, which predominantly synchronizes near the higher harmonics of the structural forcing. Further, it is shown that high-amplitude structural excitation does not amplify the natural instabilities; rather, it induces an attenuation and frequency shift of the baseline buffet modes. - Open Access
- 25 May 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 176
Modal analysis of buffet effects induced by ultrahigh bypass ratio nacelle installation
- 25 May 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 176
Open AccessModal analysis of buffet effects induced by ultrahigh bypass ratio nacelle installation
- 1 October 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 61 (10) , 4456-4467
Robust Dynamic Mode Decomposition Methodology for an Airfoil Undergoing Transonic Shock Buffet
Dynamic mode decomposition (DMD) is a data-driven technique widely used to analyze and model fluid problems, including transonic buffet flows. Despite its strengths, DMD is known to suffer from sensitivities to the selected settings and the characteristics of the data used. In this work, we closely examine the aforementioned sensitivities, identify possible pitfalls, and provide best practices for robustly performing DMD on a flow exhibiting transonic shock buffet. Specifically, we assess several DMD variants and test their sensitivity to the POD rank truncation and the sampling rate. A critical enabler to our analysis is a new presentation of the DMD algorithm as a modular framework consisting of five distinct steps. The tests also highlight the existing dangers of aliasing, when the sampling rate is too low. Finally, a list of practical recommendations and guidelines on how to accurately and robustly perform DMD on a transonic buffet flow is provided.
- 1 October 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 61 (10) , 4456-4467
Robust Dynamic Mode Decomposition Methodology for an Airfoil Undergoing Transonic Shock Buffet
Dynamic mode decomposition (DMD) is a data-driven technique widely used to analyze and model fluid problems, including transonic buffet flows. Despite its strengths, DMD is known to suffer from sensitivities to the selected settings and the characteristics of the data used. In this work, we closely examine the aforementioned sensitivities, identify possible pitfalls, and provide best practices for robustly performing DMD on a flow exhibiting transonic shock buffet. Specifically, we assess several DMD variants and test their sensitivity to the POD rank truncation and the sampling rate. A critical enabler to our analysis is a new presentation of the DMD algorithm as a modular framework consisting of five distinct steps. The tests also highlight the existing dangers of aliasing, when the sampling rate is too low. Finally, a list of practical recommendations and guidelines on how to accurately and robustly perform DMD on a transonic buffet flow is provided.
- Open Access
A robust dynamic mode decomposition methodology for an airfoil undergoing transonic shock buffet
Dynamic mode decomposition (DMD) is a data-driven technique widely used to analyze and model fluid problems including transonic buffet flows. Despite its strengths, DMD is known to suffer from sensitivities to the selected settings and the characteristics of the employed data. In this work, we closely examine the aforementioned sensitivities, identify possible pitfalls, and provide best practices to robustly perform DMD on a flow exhibiting transonic shock buffet. Specifically, we assess various DMD variants and test their sensitivity to the POD rank truncation and the sampling rate. A critical enabler to our analysis is a new presentation of the DMD algorithm as a modular framework consisting of five distinct steps. The tests also highlight the existing dangers of aliasing, when the sampling rate is too low. Finally, a list of practical recommendations and guidelines on how to accurately and robustly perform DMD on a transonic buffet flow is provided.
Open AccessA robust dynamic mode decomposition methodology for an airfoil undergoing transonic shock buffet
Dynamic mode decomposition (DMD) is a data-driven technique widely used to analyze and model fluid problems including transonic buffet flows. Despite its strengths, DMD is known to suffer from sensitivities to the selected settings and the characteristics of the employed data. In this work, we closely examine the aforementioned sensitivities, identify possible pitfalls, and provide best practices to robustly perform DMD on a flow exhibiting transonic shock buffet. Specifically, we assess various DMD variants and test their sensitivity to the POD rank truncation and the sampling rate. A critical enabler to our analysis is a new presentation of the DMD algorithm as a modular framework consisting of five distinct steps. The tests also highlight the existing dangers of aliasing, when the sampling rate is too low. Finally, a list of practical recommendations and guidelines on how to accurately and robustly perform DMD on a transonic buffet flow is provided.
- Open Access
- 14 March 2023
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 15 (1) , 61-77
Prediction of wing buffet pressure loads using a convolutional and recurrent neural network framework
In the present study, a hybrid deep learning reduced-order model (ROM) is applied for the prediction of wing buffet pressure distributions on a civil aircraft configuration. The hybrid model is compound of a convolutional variational neural network autoencoder (CNN-VAR-AE) and a long short-term memory (LSTM) neural network. The CNN-VAR-AE is used for the reduction of the high-dimensional flow field data, whereas the LSTM is applied to predict the temporal evolution of the pressure distributions. For training the neural network, experimental buffet data obtained by unsteady pressure sensitive paint measurement (iPSP), is applied. As a test case, the Airbus XRF-1 configuration is selected, considering two different experimental setups. The first setup is defined by a wind tunnel model with a clean wing, whereas the second setup includes an ultra high bypass ratio engine nacelle on each wing. Both configurations have been tested in the European Transonic Windtunnel, considering several transonic buffet conditions. Finalizing the training of the hybrid neural networks, the trained models are applied for the prediction of buffet flow conditions which are not included in the training data set. A comparison of the experimental results and the pressure distributions predicted by the hybrid ROMs indicate a precise prediction performance. Considering both aircraft configurations, the main buffet flow features are captured by the hybrid ROMs.
- 14 March 2023
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 15 (1) , 61-77
Open AccessPrediction of wing buffet pressure loads using a convolutional and recurrent neural network framework
In the present study, a hybrid deep learning reduced-order model (ROM) is applied for the prediction of wing buffet pressure distributions on a civil aircraft configuration. The hybrid model is compound of a convolutional variational neural network autoencoder (CNN-VAR-AE) and a long short-term memory (LSTM) neural network. The CNN-VAR-AE is used for the reduction of the high-dimensional flow field data, whereas the LSTM is applied to predict the temporal evolution of the pressure distributions. For training the neural network, experimental buffet data obtained by unsteady pressure sensitive paint measurement (iPSP), is applied. As a test case, the Airbus XRF-1 configuration is selected, considering two different experimental setups. The first setup is defined by a wind tunnel model with a clean wing, whereas the second setup includes an ultra high bypass ratio engine nacelle on each wing. Both configurations have been tested in the European Transonic Windtunnel, considering several transonic buffet conditions. Finalizing the training of the hybrid neural networks, the trained models are applied for the prediction of buffet flow conditions which are not included in the training data set. A comparison of the experimental results and the pressure distributions predicted by the hybrid ROMs indicate a precise prediction performance. Considering both aircraft configurations, the main buffet flow features are captured by the hybrid ROMs.
- Open Access
- 9 February 2022
- Published by Wiley in AIChE Journal
- Vol. 68 (7) , e17641
Assessment of a subgrid‐scale model for convection‐dominated mass transfer for initial transient rise of a bubble
The mass transfer between a rising bubble and the surrounding liquid is mainly determined by an extremely thin layer of dissolved gas near the bubble interface. Resolving this concentration boundary layer in numerical simulations is computationally expensive and limited to low Péclet numbers. Subgrid‐scale (SGS) models mitigate the resolution requirements by approximating the mass transfer near the interface. In this contribution, we validate an improved SGS model with a single‐phase simulation approach, which solves only the liquid phase at a highly resolved mesh. The mass transfer during the initial transient rise of moderately deformed bubbles in the range Re = 72–569 and Sc = 102–104 is carefully validated. The single‐phase approach is able to mirror the two‐phase flow field. The time‐dependent local and global mass transfer of both approaches agree well. The difference in the global Sherwood number is below than 2.5%. The improved SGS model predicts the mass transfer accurately and shows marginal mesh dependency.
- 9 February 2022
- Published by Wiley in AIChE Journal
- Vol. 68 (7) , e17641
Open AccessAssessment of a subgrid‐scale model for convection‐dominated mass transfer for initial transient rise of a bubble
The mass transfer between a rising bubble and the surrounding liquid is mainly determined by an extremely thin layer of dissolved gas near the bubble interface. Resolving this concentration boundary layer in numerical simulations is computationally expensive and limited to low Péclet numbers. Subgrid‐scale (SGS) models mitigate the resolution requirements by approximating the mass transfer near the interface. In this contribution, we validate an improved SGS model with a single‐phase simulation approach, which solves only the liquid phase at a highly resolved mesh. The mass transfer during the initial transient rise of moderately deformed bubbles in the range Re = 72–569 and Sc = 102–104 is carefully validated. The single‐phase approach is able to mirror the two‐phase flow field. The time‐dependent local and global mass transfer of both approaches agree well. The difference in the global Sherwood number is below than 2.5%. The improved SGS model predicts the mass transfer accurately and shows marginal mesh dependency.
- Open Access
- 13 December 2021
- Published by The Open Journal in Journal of Open Source Software
- Vol. 6 (68) , 3860
flowTorch - a Python library for analysis and reduced-order modeling of fluid flows
- 13 December 2021
- Published by The Open Journal in Journal of Open Source Software
- Vol. 6 (68) , 3860
Open AccessflowTorch - a Python library for analysis and reduced-order modeling of fluid flows
- Open Access
- 25 September 2021
- Published by Wiley
Assessment of a subgrid-scale model for convection-dominated mass transfer for initial transient rise of a bubble
The mass transfer between a rising bubble and the surrounding liquid is mainly determined by an extremely thin layer of dissolved gas forming at the liquid side of the gas-liquid interface. Resolving this concentration boundary layer in numerical simulations is computationally expensive. Subgrid-scale models mitigate the resolution requirements enormously and allow approximating the mass transfer in industrially relevant flow conditions with high accuracy. However, the development and validation of such models is difficult as only integral mass transfer data for steady-state conditions are available. Therefore, it is difficult to assess the validity of the sub-grid models in transient conditions. In this contribution, we compare the local and global mass transfer of an improved subgrid-scale model for rising bubbles (Re = 72-569 and Sc = 10^2-10^4) to a single-phase simulation approach, which maps the two-phase flow field to a highly-resolved mesh comprising only the liquid phase.
- 25 September 2021
- Published by Wiley
Open AccessAssessment of a subgrid-scale model for convection-dominated mass transfer for initial transient rise of a bubble
The mass transfer between a rising bubble and the surrounding liquid is mainly determined by an extremely thin layer of dissolved gas forming at the liquid side of the gas-liquid interface. Resolving this concentration boundary layer in numerical simulations is computationally expensive. Subgrid-scale models mitigate the resolution requirements enormously and allow approximating the mass transfer in industrially relevant flow conditions with high accuracy. However, the development and validation of such models is difficult as only integral mass transfer data for steady-state conditions are available. Therefore, it is difficult to assess the validity of the sub-grid models in transient conditions. In this contribution, we compare the local and global mass transfer of an improved subgrid-scale model for rising bubbles (Re = 72-569 and Sc = 10^2-10^4) to a single-phase simulation approach, which maps the two-phase flow field to a highly-resolved mesh comprising only the liquid phase.
- 1 October 2017
- Published by Elsevier in Journal of Computational Physics
- Vol. 347, 261-289
Advanced subgrid-scale modeling for convection-dominated species transport at fluid interfaces with application to mass transfer from rising bubbles
- 1 October 2017
- Published by Elsevier in Journal of Computational Physics
- Vol. 347, 261-289
Advanced subgrid-scale modeling for convection-dominated species transport at fluid interfaces with application to mass transfer from rising bubbles