Yongjun Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yongjun Shi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Wei Dong
State Key Laboratory of Robotics and Systems (HIT), Harbin Institute of Technology, Harbin 150001, China
5 shared publications - Weiqi Lin
State Key Laboratory of Robotics and Systems (HIT), Harbin Institute of Technology, Harbin 150001, China
5 shared publications - Yongzhuo Gao
State Key Laboratory of Robotics and Systems (HIT), Harbin Institute of Technology, Harbin 150001, China
5 shared publications - Dongmei Wu
State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin 150001, China
2 shared publications - Chao-Feng Chen
State Key Laboratory of Robotics and System, Harbin Institute of Technology (HIT), Harbin 150001, China
1 shared publication - Guo-Qiang Xu
Weapon Equipment Research Institute, China South Industries Group Corporation, Beijing 102202, China
1 shared publication
Latest Publications
- 26 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6478-6489
A Wearable Scissored-Pair Control Moment Gyroscopes Utilized for Reactionless Support in Human Locomotion
Wearable assistive devices (WADs) show potential for future applications in industrial and medical fields. However, wearing discomfort, caused by factors such as additional weight penalties, inappropriate straps, and joint misalignment, may disrupt the natural balance of human motion, leading to increased metabolic expenditure, muscle fatigue, and even physical injury. These challenges severely restrict the practical application of WADs. To address these challenges, we have developed a reactionless, lightweight WAD that utilizes a single device attached to the shoe, eliminating the need for additional rigid links or straps on the shank or thigh. This design provides assistive torque directly to the target limbs during human locomotion. The proposed device weighs 0.67 kg and can provide an assistive torque of 12 N·m and mechanical power of 10 W. Furthermore, we introduced a human-in-the-loop multiobjective optimization approach considering the assistance effectiveness, power consumption, system size, service safety, and actuator constraints to achieve relative optimality in performance of the proposed device. Cardiopulmonary exercise test and surface electromyography test results from seven participants indicated that the device can reduce the average gross metabolic rate by 12.62%, and the muscle activation of the rectus femoris and soleus by 35.12% and 4.10%, respectively.
- 26 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6478-6489
A Wearable Scissored-Pair Control Moment Gyroscopes Utilized for Reactionless Support in Human Locomotion
Wearable assistive devices (WADs) show potential for future applications in industrial and medical fields. However, wearing discomfort, caused by factors such as additional weight penalties, inappropriate straps, and joint misalignment, may disrupt the natural balance of human motion, leading to increased metabolic expenditure, muscle fatigue, and even physical injury. These challenges severely restrict the practical application of WADs. To address these challenges, we have developed a reactionless, lightweight WAD that utilizes a single device attached to the shoe, eliminating the need for additional rigid links or straps on the shank or thigh. This design provides assistive torque directly to the target limbs during human locomotion. The proposed device weighs 0.67 kg and can provide an assistive torque of 12 N·m and mechanical power of 10 W. Furthermore, we introduced a human-in-the-loop multiobjective optimization approach considering the assistance effectiveness, power consumption, system size, service safety, and actuator constraints to achieve relative optimality in performance of the proposed device. Cardiopulmonary exercise test and surface electromyography test results from seven participants indicated that the device can reduce the average gross metabolic rate by 12.62%, and the muscle activation of the rectus femoris and soleus by 35.12% and 4.10%, respectively.
- 25 July 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (20) , 9810-9824
A cable-driven exosuit for upper limbs: design, control, and evaluation
In the field of rehabilitation engineering, wearable robots for upper limbs tend to help powerless arms of patients smoothly complete daily activities. Compared with traditional rigid exoskeleton, soft exosuit takes the advantage of high movement flexibility and relatively compact structure so that it could be a more adaptive and compliant alternative for the elder and the disabled. In this study, a novel dual-arm exosuit is proposed to provide active assistance for multiple joints through bidirectional cable-driven modules. Several Bowden cables achieve power transmission from actuators mounted on the back to shoulders and elbows. The actuator is designed with reference to the principle of differential mechanism, in order to automatically preload both cables wrapped around it, generate assistive torque in two opposite rotation directions of a joint, and keep the human-robot interaction as safe as possible. This study adopts the constant torque control to assist in the pre-tightening process, and develop a model-based control strategy for bidirectional joint motion enhancement according to mathematical models of the human-robot system. The experimental results demonstrate that the prototype can impose pretension on each cable, and offer enough support on the joint according to the wearers’ demands.
- 25 July 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (20) , 9810-9824
A cable-driven exosuit for upper limbs: design, control, and evaluation
In the field of rehabilitation engineering, wearable robots for upper limbs tend to help powerless arms of patients smoothly complete daily activities. Compared with traditional rigid exoskeleton, soft exosuit takes the advantage of high movement flexibility and relatively compact structure so that it could be a more adaptive and compliant alternative for the elder and the disabled. In this study, a novel dual-arm exosuit is proposed to provide active assistance for multiple joints through bidirectional cable-driven modules. Several Bowden cables achieve power transmission from actuators mounted on the back to shoulders and elbows. The actuator is designed with reference to the principle of differential mechanism, in order to automatically preload both cables wrapped around it, generate assistive torque in two opposite rotation directions of a joint, and keep the human-robot interaction as safe as possible. This study adopts the constant torque control to assist in the pre-tightening process, and develop a model-based control strategy for bidirectional joint motion enhancement according to mathematical models of the human-robot system. The experimental results demonstrate that the prototype can impose pretension on each cable, and offer enough support on the joint according to the wearers’ demands.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (6) , 5919-5926
Human-in-the-Loop Modeling and Control of an Upper Limb Exosuit With Tendon-Sheath Actuation
Cable-driven exosuits have the advantages of being lightweight, compact, and well-adapted due to avoiding extensive usage of rigid structures to transmit power. However, applying too many flexible materials into the system will cause some problems such as insufficient stiffness, easy deformation, and non-negligible friction, thus increasing the difficulty of synergistic control between the human and cable-driven exosuit. In this letter, we attempt to control the exosuit effectively and reliably to provide assistance for the elbow, by analyzing the force and position relationship of connecting parts between the power source and the joint. The fundamental laws of Tendon-Sheath Mechanism (TSM) are deeply analyzed, which has obtained the corresponding mathematical description of force transmission and cable elongation. A spring-damping model is introduced between the tendon end and forearm to describe the character of textile-based interface, whose parameters could be identified by the least square method with the forgetting factor. Then, these theoretical analyses are incorporated into the human-in-the-loop modeling that can achieve appropriate motion generation from the desired joint torque to the actuator output. In the experiments, we have evaluated the output performance of the fabricated prototype and its efficacy on muscle activity based on the identification of spring coefficient and damping coefficient. The results demonstrate that the exosuit is able to respond appropriately to the changes of elbow position while realizing accurate tracking of the torque profile (the RMSE is 0.092 ± 0.011 Nm). In addition, it can effectively reduce the magnitude of muscle activation (29.52% reduction in biceps activation), thereby alleviating physical fatigue.
- 18 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (6) , 5919-5926
Human-in-the-Loop Modeling and Control of an Upper Limb Exosuit With Tendon-Sheath Actuation
Cable-driven exosuits have the advantages of being lightweight, compact, and well-adapted due to avoiding extensive usage of rigid structures to transmit power. However, applying too many flexible materials into the system will cause some problems such as insufficient stiffness, easy deformation, and non-negligible friction, thus increasing the difficulty of synergistic control between the human and cable-driven exosuit. In this letter, we attempt to control the exosuit effectively and reliably to provide assistance for the elbow, by analyzing the force and position relationship of connecting parts between the power source and the joint. The fundamental laws of Tendon-Sheath Mechanism (TSM) are deeply analyzed, which has obtained the corresponding mathematical description of force transmission and cable elongation. A spring-damping model is introduced between the tendon end and forearm to describe the character of textile-based interface, whose parameters could be identified by the least square method with the forgetting factor. Then, these theoretical analyses are incorporated into the human-in-the-loop modeling that can achieve appropriate motion generation from the desired joint torque to the actuator output. In the experiments, we have evaluated the output performance of the fabricated prototype and its efficacy on muscle activity based on the identification of spring coefficient and damping coefficient. The results demonstrate that the exosuit is able to respond appropriately to the changes of elbow position while realizing accurate tracking of the torque profile (the RMSE is 0.092 ± 0.011 Nm). In addition, it can effectively reduce the magnitude of muscle activation (29.52% reduction in biceps activation), thereby alleviating physical fatigue.
- 23 May 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12645, 220-224
Application of Internet of Things in power systems in remote inspection system of infrastructure construction
The power industry is developing fast and there are many power construction projects. With the growing intelligent degree of power system, the construction of power projects become more complicated. There are more than one thousand workers on the site. How to inspect and guarantee the security in construction remotely is a key subject. This paper introduces the principles and means of remote inspection system of infrastructure construction by using internet of things in power systems. Through the application of this system, violations on the construction site can be discovered in a timely and effective manner, and the planning level of construction can be better improved.
- 23 May 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12645, 220-224
Application of Internet of Things in power systems in remote inspection system of infrastructure construction
The power industry is developing fast and there are many power construction projects. With the growing intelligent degree of power system, the construction of power projects become more complicated. There are more than one thousand workers on the site. How to inspect and guarantee the security in construction remotely is a key subject. This paper introduces the principles and means of remote inspection system of infrastructure construction by using internet of things in power systems. Through the application of this system, violations on the construction site can be discovered in a timely and effective manner, and the planning level of construction can be better improved.
- Open Access
Soft Wearable Robots: Development Status and Technical Challenges
In recent years, more and more research has begun to focus on the flexible and lightweight design of wearable robots. During this process, many novel concepts and achievements have been continuously made and shown to the public, while new problems have emerged at the same time, which need to be solved. In this paper, we give an overview of the development status of soft wearable robots for human movement assistance. On the basis of a clear definition, we perform a system classification according to the target assisted joint and attempt to describe the overall prototype design level in related fields. Additionally, it is necessary to sort out the latest research progress of key technologies such as structure, actuation, control and evaluation, thereby analyzing the design ideas and basic characteristics of them. Finally, we discuss the possible application fields, and propose the main challenges of this valuable research direction.
Open AccessSoft Wearable Robots: Development Status and Technical Challenges
In recent years, more and more research has begun to focus on the flexible and lightweight design of wearable robots. During this process, many novel concepts and achievements have been continuously made and shown to the public, while new problems have emerged at the same time, which need to be solved. In this paper, we give an overview of the development status of soft wearable robots for human movement assistance. On the basis of a clear definition, we perform a system classification according to the target assisted joint and attempt to describe the overall prototype design level in related fields. Additionally, it is necessary to sort out the latest research progress of key technologies such as structure, actuation, control and evaluation, thereby analyzing the design ideas and basic characteristics of them. Finally, we discuss the possible application fields, and propose the main challenges of this valuable research direction.
- Open Access
- 22 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (9) , 1335
Human Joint Torque Estimation Based on Mechanomyography for Upper Extremity Exosuit
Human intention recognition belongs to the algorithm basis for exoskeleton robots to generate synergic movements and provide corresponding assistance. In this article, we acquire and analyze the mechanomyography (MMG) to estimate the current joint torque and apply this method to the rehabilitation training research of the upper extremity exosuit. In order to obtain relatively pure biological signals, a MMG processing method based on the Hilbert-Huang Transform (HHT) is proposed to eliminate the mixed noise and motion artifacts. After extracting features and forming the dataset, a random forest regression (RFR) model is designed to build the mapping relationship between MMG and human joint output through offline learning. In addition, an upper extremity exosuit is constructed for multi-joint assistance. Based on the above research, we develop a torque estimation-based control strategy and make it responsible for the intention understanding and motion servo of this customized system. Finally, an actual test verifies the accuracy and reliability of this recognition algorithm, and an efficiency evaluation experiment also proves the feasibility for power assistance.
- 22 April 2022
- Published by MDPI AG in Electronics
- Vol. 11 (9) , 1335
Open AccessHuman Joint Torque Estimation Based on Mechanomyography for Upper Extremity Exosuit
Human intention recognition belongs to the algorithm basis for exoskeleton robots to generate synergic movements and provide corresponding assistance. In this article, we acquire and analyze the mechanomyography (MMG) to estimate the current joint torque and apply this method to the rehabilitation training research of the upper extremity exosuit. In order to obtain relatively pure biological signals, a MMG processing method based on the Hilbert-Huang Transform (HHT) is proposed to eliminate the mixed noise and motion artifacts. After extracting features and forming the dataset, a random forest regression (RFR) model is designed to build the mapping relationship between MMG and human joint output through offline learning. In addition, an upper extremity exosuit is constructed for multi-joint assistance. Based on the above research, we develop a torque estimation-based control strategy and make it responsible for the intention understanding and motion servo of this customized system. Finally, an actual test verifies the accuracy and reliability of this recognition algorithm, and an efficiency evaluation experiment also proves the feasibility for power assistance.
- Open Access
- 13 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 169107-169122
Development and Hybrid Control of an Electrically Actuated Lower Limb Exoskeleton for Motion Assistance
This paper describes a system design and hybrid control algorithm of an electrically actuated lower limb exoskeleton (LLE). The system design mainly includes three parts: mechanical structure design, actuation system design and sensor system design. According to the initial state of the joint angle, LLE can be divided into Non-anthropomorphic state (NAS) and anthropomorphic state (AS). The human motion intention (HMI) estimation can be divided into gait phase classification and reference trajectory estimation. The fuzzy logic is used to detect different phases in the gait phase classification. In the reference trajectory estimation, the kinematic model of the LLE is utilized to obtain a continuous joint trajectory, which is used as input of the control law. To make the LLE accurately follow the movement of people and remain stable, a hybrid dual-mode control strategy is proposed in this paper, i.e., the adaptive impedance control (AIC) method is used to improve the stability and resistance to shock in stance phase, and the active disturbance rejection control with the fast terminal sliding mode control (ADRC-FTSMC) method is employed to improve the response speed and the tracking precision in swing phase. Furthermore, in order to solve the torque discontinuity in the switching process, a smoothing method is proposed during the transition. Finally, the prototype experiments were set up to verify the tracking performance and power-assisted effect of the proposed exoskeleton. The experiments results show the LLE can achieve excellent tracking performance and power-assisted effect based on the proposed HMI methodology and hybrid dual-mode control strategy.
- 13 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 169107-169122
Open AccessDevelopment and Hybrid Control of an Electrically Actuated Lower Limb Exoskeleton for Motion Assistance
This paper describes a system design and hybrid control algorithm of an electrically actuated lower limb exoskeleton (LLE). The system design mainly includes three parts: mechanical structure design, actuation system design and sensor system design. According to the initial state of the joint angle, LLE can be divided into Non-anthropomorphic state (NAS) and anthropomorphic state (AS). The human motion intention (HMI) estimation can be divided into gait phase classification and reference trajectory estimation. The fuzzy logic is used to detect different phases in the gait phase classification. In the reference trajectory estimation, the kinematic model of the LLE is utilized to obtain a continuous joint trajectory, which is used as input of the control law. To make the LLE accurately follow the movement of people and remain stable, a hybrid dual-mode control strategy is proposed in this paper, i.e., the adaptive impedance control (AIC) method is used to improve the stability and resistance to shock in stance phase, and the active disturbance rejection control with the fast terminal sliding mode control (ADRC-FTSMC) method is employed to improve the response speed and the tracking precision in swing phase. Furthermore, in order to solve the torque discontinuity in the switching process, a smoothing method is proposed during the transition. Finally, the prototype experiments were set up to verify the tracking performance and power-assisted effect of the proposed exoskeleton. The experiments results show the LLE can achieve excellent tracking performance and power-assisted effect based on the proposed HMI methodology and hybrid dual-mode control strategy.