Bachu Deb
Bachu Deb has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kanthala Uma Reddy
Department of Mechanical Engineering, Vardhaman College of Engineering
4 shared publications Bidesh Roy
3 shared publications- Bidesh Roy
National Institute of Technology Mizoram
3 shared publications - Sheikh Mohammad Rashid
NIT Mizoram
2 shared publications Akarsan Mukherjee
1 shared publicationKanthala Uma Reddy
National Institute Technology
1 shared publication
Latest Publications
- 6 October 2024
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 13633-13653
Experimental and numerical analysis of NREL S823 airfoil with auxiliary airfoil integration
- 6 October 2024
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 13633-13653
Experimental and numerical analysis of NREL S823 airfoil with auxiliary airfoil integration
- 6 July 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (2) , 1913-1929
Experimental Study on Influence of Aspect Ratio and Auxiliary Blade Profile on the Performance of H-Type Darrieus Wind Rotor
- 6 July 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 49 (2) , 1913-1929
Experimental Study on Influence of Aspect Ratio and Auxiliary Blade Profile on the Performance of H-Type Darrieus Wind Rotor
- Open Access
- 1 July 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (4)
Experimental investigation of solidity and blade profile effects on H-Darrieus wind rotor: Performance and self-starting analysis
The present study investigates the impact of rotor solidity and blade profile on the self-starting characteristics and performance of H-Darrieus wind rotors (H-rotors) through subsonic wind tunnel experiments. Three symmetrical (NACA 0018) and three unsymmetrical (NREL S823) H-rotors were analyzed to determine the coefficient of static torque (Cts) and coefficient of power (Cp) across three solidities (σ = 0.25, 0.3, and 0.35) and two free stream wind speeds (Uf = 6 and 8 m/s). The findings revealed that the NREL S823-bladed H-rotor outperformed the NACA 0018-bladed H-rotor, displaying 13% and 11% higher Cts values at σ = 0.25 (Uf = 6 and 8 m/s), 9% and 9% at σ = 0.3 (Uf = 6 and 8 m/s), and 13% and 11% at σ = 0.35 (Uf = 6 and 8 m/s). The NREL S823-bladed H-rotor achieved a maximum Cp of 0.197 at σ = 0.3 and Uf = 8 m/s, which is 6% higher than the maximum Cp obtained by the NACA 0018-bladed H-rotor. Furthermore, the trend of maximum Cp values for both H-rotors followed the order of Cp, max σ = 0.25 < Cp, max σ = 0.3 > Cp, max σ = 0.35. Based on the experimental findings, it is inferred that the NREL S823-bladed H-rotor with a solidity of 0.3 is suitable for small-scale wind turbines.
- 1 July 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (4)
Open AccessExperimental investigation of solidity and blade profile effects on H-Darrieus wind rotor: Performance and self-starting analysis
The present study investigates the impact of rotor solidity and blade profile on the self-starting characteristics and performance of H-Darrieus wind rotors (H-rotors) through subsonic wind tunnel experiments. Three symmetrical (NACA 0018) and three unsymmetrical (NREL S823) H-rotors were analyzed to determine the coefficient of static torque (Cts) and coefficient of power (Cp) across three solidities (σ = 0.25, 0.3, and 0.35) and two free stream wind speeds (Uf = 6 and 8 m/s). The findings revealed that the NREL S823-bladed H-rotor outperformed the NACA 0018-bladed H-rotor, displaying 13% and 11% higher Cts values at σ = 0.25 (Uf = 6 and 8 m/s), 9% and 9% at σ = 0.3 (Uf = 6 and 8 m/s), and 13% and 11% at σ = 0.35 (Uf = 6 and 8 m/s). The NREL S823-bladed H-rotor achieved a maximum Cp of 0.197 at σ = 0.3 and Uf = 8 m/s, which is 6% higher than the maximum Cp obtained by the NACA 0018-bladed H-rotor. Furthermore, the trend of maximum Cp values for both H-rotors followed the order of Cp, max σ = 0.25 < Cp, max σ = 0.3 > Cp, max σ = 0.35. Based on the experimental findings, it is inferred that the NREL S823-bladed H-rotor with a solidity of 0.3 is suitable for small-scale wind turbines.
- 12 December 2020
- Published by Springer Nature
- p. 279-286
Analysis of the Aerodynamic Characteristics of NREL S823 and DU 06-W-200 Airfoils at Various Reynolds Numbers Using QBlade
- 12 December 2020
- Published by Springer Nature
- p. 279-286
Analysis of the Aerodynamic Characteristics of NREL S823 and DU 06-W-200 Airfoils at Various Reynolds Numbers Using QBlade
- 12 December 2019
- Published by Springer Nature
- p. 575-582
Flow Physics Analysis on the Effect of Cambered Airfoil Blades on Vertical Axis Wind Turbines Using CFD
- 12 December 2019
- Published by Springer Nature
- p. 575-582
Flow Physics Analysis on the Effect of Cambered Airfoil Blades on Vertical Axis Wind Turbines Using CFD
- 3 August 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1998 (1) , 020017
Wind energy, harvesting devices and market trends: A review
Wind energy has been used historically for sailing boat, grinding grain and pumping water. Wind mills were used for harvesting energy from the wind, which developed overtime. Various new designs were constructed for obtaining maximum output. However, there is a limit for wind energy extraction as formulated by Albert Betz, with maximum theoretical efficiency of 59.3%. Wind energy harvesting devices are called wind turbines, which are broadly classified as horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs). Most of the commercial wind turbines are horizontal machines because of higher efficiency than vertical machines. Their design is complex and cannot be used in constrained locations. Whereas, vertical machines are having certain advantages like cheap and simple construction, Omni-directional and they can be used in small space. Present paper is the result of study conducted from available literatures, journals of past researchers and current market trends in wind energy sector to showcase the potential of wind energy and challenges for meeting growing energy demands sustainably.
- 3 August 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1998 (1) , 020017
Wind energy, harvesting devices and market trends: A review
Wind energy has been used historically for sailing boat, grinding grain and pumping water. Wind mills were used for harvesting energy from the wind, which developed overtime. Various new designs were constructed for obtaining maximum output. However, there is a limit for wind energy extraction as formulated by Albert Betz, with maximum theoretical efficiency of 59.3%. Wind energy harvesting devices are called wind turbines, which are broadly classified as horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs). Most of the commercial wind turbines are horizontal machines because of higher efficiency than vertical machines. Their design is complex and cannot be used in constrained locations. Whereas, vertical machines are having certain advantages like cheap and simple construction, Omni-directional and they can be used in small space. Present paper is the result of study conducted from available literatures, journals of past researchers and current market trends in wind energy sector to showcase the potential of wind energy and challenges for meeting growing energy demands sustainably.