Jinrong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jinrong Liu has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Yanfang Gao
School of Chemical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
3 shared publications Lijun Li
College of Chemical Engineering, Inner Mongolia University of Technology, Hohhot 010051, People’s Republic of China
2 shared publicationsZhiqiang He
College of Chemical Engineering, Inner Mongolia University of Technology, Huhhot, China
2 shared publicationsChunping Li
Inner Mongolia University of Technology
1 shared publicationDawei Lan
College of Chemical Engineering, Inner Mongolia University of Technology, Huhhot 010051, China
1 shared publicationDong Wang
School of Chemical Engineering, Inner Mongolia University of Technology, Hohhot, 010051, P. R. China
1 shared publication
Latest Publications
- Open Access
- 7 July 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (28) , 24646-24655
Strong Metal–Support Interactions of Ni-CeO2 Effectively Improve the Performance of a Molten Hydroxide Direct Carbon Fuel Cell
A strong metal-support interaction (SMSI) type catalyst has been synthesized and applied to a molten hydroxide direct carbon fuel cell (MHDCFC) to enhance the reaction activity of the anode carbon fuel through the interaction between the metal Ni and the support CeO2. Two catalysts have been prepared by a direct precipitation method (denoted NiO@CeO2) and a hydrothermal method (denoted NiO-CeO2), which are reduced by H2 to obtain Ni@CeO2 and Ni-CeO2, respectively. X-ray photoelectron spectroscopy (XPS), Raman, and temperature-programmed hydrogen reduction (H2-TPR) analysis results show that there are obvious oxygen vacancies and a Ni-O-Ce interface structure in NiO-CeO2 and Ni-CeO2, which is induced by the interaction between Ni and CeO2. The calculation results of current density and power density show that the performance of the MHDCFC is significantly improved in the presence of Ni-CeO2. The function fitting curves of the logarithm of the reaction rate constant (ln k) and the reciprocal of the temperature (1/T) show that the slope of the curve is decreased significantly after the addition of Ni-CeO2. In combination with density functional theory (DFT), the anode carbon reaction path is simulated in the MHDCFC, and the calculation results show that the reaction energy for the anodic carbon to generate carbon dioxide is decreased by 1.03 eV in the presence of Ni-CeO2.
- 7 July 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (28) , 24646-24655
Open AccessStrong Metal–Support Interactions of Ni-CeO2 Effectively Improve the Performance of a Molten Hydroxide Direct Carbon Fuel Cell
A strong metal-support interaction (SMSI) type catalyst has been synthesized and applied to a molten hydroxide direct carbon fuel cell (MHDCFC) to enhance the reaction activity of the anode carbon fuel through the interaction between the metal Ni and the support CeO2. Two catalysts have been prepared by a direct precipitation method (denoted NiO@CeO2) and a hydrothermal method (denoted NiO-CeO2), which are reduced by H2 to obtain Ni@CeO2 and Ni-CeO2, respectively. X-ray photoelectron spectroscopy (XPS), Raman, and temperature-programmed hydrogen reduction (H2-TPR) analysis results show that there are obvious oxygen vacancies and a Ni-O-Ce interface structure in NiO-CeO2 and Ni-CeO2, which is induced by the interaction between Ni and CeO2. The calculation results of current density and power density show that the performance of the MHDCFC is significantly improved in the presence of Ni-CeO2. The function fitting curves of the logarithm of the reaction rate constant (ln k) and the reciprocal of the temperature (1/T) show that the slope of the curve is decreased significantly after the addition of Ni-CeO2. In combination with density functional theory (DFT), the anode carbon reaction path is simulated in the MHDCFC, and the calculation results show that the reaction energy for the anodic carbon to generate carbon dioxide is decreased by 1.03 eV in the presence of Ni-CeO2.
- Open Access
- 5 May 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (22) , 13653-13659
A free-standing VN/MXene composite anode for high-performance Li-ion hybrid capacitors
The Li-ion hybrid capacitor (LIHC) is considered as a promising candidate for electrochemical energy storage owing to the high energy and power density. However, the sluggish anodic reaction kinetics and high reaction voltage greatly hinder the overall performance of LIHCs. Herein, a free-standing VN/MXene composite anode with high specific capacity and low reaction voltage was prepared by a simple vacuum filtration method. The obtained VN/MXene composite anode shows a high discharge specific capacity of 501.7 mA h g−1 at 0.1 A g−1 and excellent rate capability (191.8 mA h g−1 at 5 A g−1), as well as much extended cycling stability (1500 cycles at 2 A g−1). When combined with an egg white-derived activated carbon (E-AC) cathode, the assembled LIHC delivers a high specific capacity of 59.1 F g−1 and a high energy density of 129.3 W h kg−1 with a power density of 449.7 W kg−1. Even at a high current density of 5 A g−1, the LIHC still maintains an exciting energy density of 42.81 W h kg−1 at 11 249 W kg−1. Meanwhile, the cycling life can be extended to 5000 cycles with a high capacity retention of 98% at 1 A g−1. We believe that this work opens up new possibilities for developing advanced free-standing MXene-based electrodes for Li-ion storage.
- 5 May 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (22) , 13653-13659
Open AccessA free-standing VN/MXene composite anode for high-performance Li-ion hybrid capacitors
The Li-ion hybrid capacitor (LIHC) is considered as a promising candidate for electrochemical energy storage owing to the high energy and power density. However, the sluggish anodic reaction kinetics and high reaction voltage greatly hinder the overall performance of LIHCs. Herein, a free-standing VN/MXene composite anode with high specific capacity and low reaction voltage was prepared by a simple vacuum filtration method. The obtained VN/MXene composite anode shows a high discharge specific capacity of 501.7 mA h g−1 at 0.1 A g−1 and excellent rate capability (191.8 mA h g−1 at 5 A g−1), as well as much extended cycling stability (1500 cycles at 2 A g−1). When combined with an egg white-derived activated carbon (E-AC) cathode, the assembled LIHC delivers a high specific capacity of 59.1 F g−1 and a high energy density of 129.3 W h kg−1 with a power density of 449.7 W kg−1. Even at a high current density of 5 A g−1, the LIHC still maintains an exciting energy density of 42.81 W h kg−1 at 11 249 W kg−1. Meanwhile, the cycling life can be extended to 5000 cycles with a high capacity retention of 98% at 1 A g−1. We believe that this work opens up new possibilities for developing advanced free-standing MXene-based electrodes for Li-ion storage.
- Open Access
- 21 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (9) , 1422
A Free-Standing α-MoO3/MXene Composite Anode for High-Performance Lithium Storage
Replacing the commercial graphite anode in Li-ion batteries with pseudocapacitor materials is an effective way to obtain high-performance energy storage devices. α-MoO3 is an attractive pseudocapacitor electrode material due to its theoretical capacity of 1117 mAh g−1. Nevertheless, its low conductivity greatly limits its electrochemical performance. MXene is often used as a 2D conductive substrate and flexible framework for the development of a non-binder electrode because of its unparalleled electronic conductivity and excellent mechanical flexibility. Herein, a free-standing α-MoO3/MXene composite anode with a high specific capacity and an outstanding rate capability was prepared using a green and simple method. The resultant α-MoO3/MXene composite electrode combines the advantages of each of the two components and possesses improved Li+ diffusion kinetics. In particular, this α-MoO3/MXene free-standing electrode exhibited a high Li+ storage capacity (1008 mAh g−1 at 0.1 A g−1) and an outstanding rate capability (172 mAh g−1 at 10 A g−1), as well as a much extended cycling stability (500 cycles at 0.5 A g−1). Furthermore, a full cell was fabricated using commercial LiFePO4 as the cathode, which displayed a high Li+ storage capacity of 160 mAh g−1 with an outstanding rate performance (48 mAh g−1 at 1 A g−1). We believe that our research reveals new possibilities for the development of an advanced free-standing electrode from pseudocapacitive materials for high-performance Li-ion storage.
- 21 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (9) , 1422
Open AccessA Free-Standing α-MoO3/MXene Composite Anode for High-Performance Lithium Storage
Replacing the commercial graphite anode in Li-ion batteries with pseudocapacitor materials is an effective way to obtain high-performance energy storage devices. α-MoO3 is an attractive pseudocapacitor electrode material due to its theoretical capacity of 1117 mAh g−1. Nevertheless, its low conductivity greatly limits its electrochemical performance. MXene is often used as a 2D conductive substrate and flexible framework for the development of a non-binder electrode because of its unparalleled electronic conductivity and excellent mechanical flexibility. Herein, a free-standing α-MoO3/MXene composite anode with a high specific capacity and an outstanding rate capability was prepared using a green and simple method. The resultant α-MoO3/MXene composite electrode combines the advantages of each of the two components and possesses improved Li+ diffusion kinetics. In particular, this α-MoO3/MXene free-standing electrode exhibited a high Li+ storage capacity (1008 mAh g−1 at 0.1 A g−1) and an outstanding rate capability (172 mAh g−1 at 10 A g−1), as well as a much extended cycling stability (500 cycles at 0.5 A g−1). Furthermore, a full cell was fabricated using commercial LiFePO4 as the cathode, which displayed a high Li+ storage capacity of 160 mAh g−1 with an outstanding rate performance (48 mAh g−1 at 1 A g−1). We believe that our research reveals new possibilities for the development of an advanced free-standing electrode from pseudocapacitive materials for high-performance Li-ion storage.
- 11 December 2019
- Published by Springer Nature in Ionics
- Vol. 26 (4) , 2021-2029
Enhanced capacitive performance of WO3@W18O49-CNFs-based flexible electrode as a high performance supercapacitor
- 11 December 2019
- Published by Springer Nature in Ionics
- Vol. 26 (4) , 2021-2029
Enhanced capacitive performance of WO3@W18O49-CNFs-based flexible electrode as a high performance supercapacitor
- 20 February 2014
- Published by China Science Publishing & Media Ltd. in Journal of Inorganic Materials
- Vol. 29 (2) , 220-224
Microstructure and Ionic Conductivity of Sb-doped Li7La3Zr2O12 Ceramics
- 20 February 2014
- Published by China Science Publishing & Media Ltd. in Journal of Inorganic Materials
- Vol. 29 (2) , 220-224
Microstructure and Ionic Conductivity of Sb-doped Li7La3Zr2O12 Ceramics
- 1 February 2014
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 31 (3) , 514-521
Spectroscopic study on the intermolecular interaction of SO2 absorption in poly-ethylene glycol+H2O systems
- 1 February 2014
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 31 (3) , 514-521
Spectroscopic study on the intermolecular interaction of SO2 absorption in poly-ethylene glycol+H2O systems
- 23 October 2012
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 51 (43) , 13882-13890
Absorption Properties and Spectroscopic Studies of Dilute Sulfur Dioxide in Aqueous Glycerol Solutions
- 23 October 2012
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 51 (43) , 13882-13890
Absorption Properties and Spectroscopic Studies of Dilute Sulfur Dioxide in Aqueous Glycerol Solutions