JBJosué César Bastos

Josué César Bastos

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Josué César Bastos has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Synthesis of Railway Concrete Crosstie Advancements in North America

    by Josué Bastos, J. Riley Edwards, Marcus S. Dersch, Dimitris Rizos, Yu Qian, Robert Peterman

    There are over 35 million concrete crossties (sleepers) installed in track in North America, with approximately 750,000 to 1,500,000 additional new ones installed annually. These components have been the focus of much research over recent years, which is resulting in significant advancements in their design and use. New solutions are addressing rail seat deterioration, abrasion, splitting, and other issues that have been associated with past derailments or have required major intervention. Moreover, concrete crosstie design is moving toward a performance-based approach, which is more efficient than the traditional prescription-based methods with generous safety factors. Smart crossties are also emerging, which go far beyond the traditional concepts of crosstie application. This paper presents an overall picture of the state of the art of concrete crossties in North America, linking fundamentals, industry challenges, design approaches, recent developments, and trends for the future.


  • Degradation Mechanisms of Concrete Due to Water Flow in Cracks of Prestressed Railroad Sleepers under Cyclic Loading

    by Josué César Bastos, Marcus S. Dersch, J. Riley Edwards

    Visual inspection and field experience from concrete railroad sleepers (crossties) provide evidence that cyclic loading of train axles accelerates their degradation in areas of high precipitation. Because prestressing forces close flexural cracks after every load application, this repetitive motion generates water flow within cracks. In this study, multiple mechanisms are systematically investigated through laboratory experimentation to understand the deterioration of concrete in cracked prestressed beams exposed to moisture and under cyclic loading. Results identified abrasion as the leading degradation mechanism. High hydraulic pressures, cavitation, and leaching damage are also investigated but seem less likely to govern this problem.


  • Statistical Prediction of Center Negative Bending Capacity of Pretensioned Concrete Crossties

    by Josué César Bastos, Marcus S. Dersch, J. Riley Edwards

    When concrete railway crossties are installed in North American freight track and subjected to flexural loads, center negative bending is one of the most critical demands. However, the ultimate flexural capacity at the crosstie center is often unknown and hard to obtain. Because railroads do not always know what the remaining flexural capacity of concrete crossties is, it becomes difficult to assess whether crossties should be removed from service or if it is safe to increase axle loads as an example. To address this challenge, we present a predictive mathematical model based on laboratory experimentation data of various common pretensioned concrete crosstie designs to estimate their center negative bending strength. The model is developed using least absolute shrinkage and selection operator (LASSO) techniques. The final derived equation uses predictor variables that are easily interpreted and applied, and the results are adequate for approximations when limited information is available about the crossties’ characteristics and lengthy structural calculations or additional laboratory testing is not practical. For the investigated crosstie designs, the maximum prediction error was 5.5%.


  • Identification of the under-tie pad material characteristics for stress state reduction

    by Jacob M Branson, Marcus S Dersch, Arthur de Oliveira Lima, J Riley Edwards, Josue Cesar Bastos

    The degradation of ballast particles and concrete crossties in heavy-haul railroad tracks poses problems such as inhibiting proper drainage and disturbing track geometry. under-tie pads offer a solution to reduce crosstie–ballast stresses by improving load distribution through the track structure and reducing pressures on ballast particles and the crosstie surface. Despite the emergence of under-tie pads on heavy-haul corridors, optimal characteristics for the reduction of the tie–ballast stress state have not been defined in literature. In this research, several under-tie pad products and generic materials with various thicknesses and hardnesses were studied to identify appropriate properties of under-tie pad products for pressure distribution. The findings from this research provide an insight into how material characteristics influence the pressure mitigation performance of under-tie pads. Results from this study indicate that thickness is the most crucial metric determining under-tie pad performance in reducing ballast degradation; hardness and material type also have an effect, but to a lesser degree.


  • Development of a parametric model for the prediction of concrete railway crosstie service bending moments

    by J Riley Edwards, Yubing Liang, Josué C Bastos, Marcus S Dersch

    Concrete crosstie usage in North America continues to increase for rail transit and heavy axle load freight railroad applications. As such, it is important to design optimized crossties to save both capital and maintenance funds. Recently, a method for quantifying concrete crosstie bending moments using concrete surface strain gauges has been developed, deployed, and validated. Data from this method are used in this paper for (1) building a model to quantify sources of variability for field bending moments and the relative influence of each source, (2) generating an accurate model to predict bending moments at the two field locations surveyed, and (3) comparing the relative effects of predictor variables on rail transit and heavy axle load freight rail modes to determine their influence on service bending moments. Results show that it is possible to develop a reliable model to predict bending moments, and that several factors have a strong influence on these predictions, namely vertical load, temperature gradient, and axle location within a railcar truck. The most significant factor is the crosstie support condition, especially with respect to center moments. While the aforementioned model’s primary utility is for the two sites and railroad systems surveyed, the model provides a valuable tool for determining which variables are the most critical for inclusion in the future mechanistic design of concrete crossties.


  • Laboratory Characterization of Structural Capacity of North American Heavy Haul Concrete Crossties

    by Josué C. Bastos, Alejandro Álvarez-Reyes, Marcus S. Dersch, J. Riley Edwards, Christopher P. L. Barkan

    Over the past few decades, the use of concrete crossties in North America has increased as a high-performance alternative to timber crossties, especially in heavy-haul freight and higher speed rail corridors. To accommodate heavier axle-loads and prevent center cracking, railroads and suppliers have consistently increased the bending moment thresholds that a crosstie must withstand, leading to stiffer elements that may be more prone to brittle cracking. This paper attempts to characterize the structural capacity of the crosstie at two critical design locations, the center and the rail seat cross sections. Concrete crossties were subjected to four-point bending tests at both the center and rail seat, while recording corresponding deflections using protocols adapted from the American Railway Engineering and Maintenance-of-Way Association (AREMA) Manual on Railway Engineering. Experimentation was performed on some of the most representative concrete crosstie designs that are currently installed in North America, with 70 individual crossties undergoing tests. The resulting load-deflection curves illustrate the variability of each crosstie’s response to load and characterize the flexural performance of the crossties. Results showed that North American crosstie designs frequently have significant reserve capacity and high stiffness. The results also indicate that even severely abraded crossties can have enough flexural capacity to withstand typical field loading conditions.


  • Flexural Behavior of Concrete Crossties under Different Support Conditions

    by Josué César Bastos, Marcus S. Dersch, J. Riley Edwards, Bassem O. Andrawes

    Successful mapping of concrete crosstie flexural demands to different railroad track support conditions can lead to an improved understanding of crosstie flexural performance and more representative design requirements. Even though the ballast layer typically provides significant pressure distribution variability under concrete crossties, understanding these support conditions is essential for accurately predicting bending moments along the crossties, a useful metric for both design and planning of tamping activities in railroad track. To quantify the influence of support conditions on concrete crossties’ bending moments, laboratory experiments were performed. New and center-cracked concrete crossties were loaded while subjected to different support conditions through the use of rubber pads designed to simulate the ballast support. Results show that bending moments at the crosstie center are quite sensitive and may even be underestimated in current U.S. design practices that do not currently allow for cracking. Additionally, findings indicate that rail seat bending moments may be overestimated in typical design practices. Finally, there was no statistically significant difference between bending moments of uncracked and cracked crossties for the investigated cracking pattern.