Yuan Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuan Zhang has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
- Yury Gogotsi
A.J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia, USA
7 shared publications - Volker Presser
INM ‐ Leibniz Institute for New Materials Saarbrücken Germany
4 shared publications - Guang Feng
Huazhong University of Science and Technology
3 shared publications - Teng Zhang
Drexel University
3 shared publications - Alexei A. Kornyshev
Imperial College London
2 shared publications Jongyoun Kim
Drexel University 3141 Chestnut Street
2 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75137
Soft and Transient Bioelectronics Enabled by Polymer‐Free Ti 3 C 2 T x MXene Hydrogels
Implantable bioelectronics for acute neural applications must combine tissue‐like mechanics with high electrochemical performance while enabling safe biodegradation to avoid risks associated with explant surgeries. Here, we present MXgel bioelectronics, a soft and fully transient hydrogel platform that enables high‐fidelity electrophysiological recordings and effective stimulation with programmable degradation under physiological conditions. The platform employs polymer‐free Ti 3 C 2 T x MXene hydrogels (MXgel) that achieve exceptional electrical conductivities (hydrated: 790 ± 150 S m −1 , freeze‐dried: 4420 ± 576 S m −1 ). Integrated on biodegradable gelatin‐based substrates, MXgel bioelectronics exhibit low electrochemical impedance (1.06 ± 0.37 kΩ at 1 kHz), 25‐fold higher cathodic charge storage (207.1 ± 48.8 mC cm −2 ), and 10‐fold greater charge injection capacity (0.24 ± 0.08 mC cm −2 ) than conventional clinical electrodes. We demonstrate that these properties enable cortical and peripheral neural recordings with ∼60 dB signal‐to‐noise ratio and effective neuromodulation. Moreover, MXgel bioelectronics undergo safe degradation under physiological conditions with predictable and tunable kinetics. Importantly, MXgel bioelectronics do not trigger severe foreign body reaction, and their degradation byproducts do not accumulate in the body, confirming safe systemic clearance. Together, these results establish MXgel bioelectronics as a clinically relevant platform for soft, high‐performance, and transient neural interfaces.
- 25 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75137
Open AccessSoft and Transient Bioelectronics Enabled by Polymer‐Free Ti 3 C 2 T x MXene Hydrogels
Implantable bioelectronics for acute neural applications must combine tissue‐like mechanics with high electrochemical performance while enabling safe biodegradation to avoid risks associated with explant surgeries. Here, we present MXgel bioelectronics, a soft and fully transient hydrogel platform that enables high‐fidelity electrophysiological recordings and effective stimulation with programmable degradation under physiological conditions. The platform employs polymer‐free Ti 3 C 2 T x MXene hydrogels (MXgel) that achieve exceptional electrical conductivities (hydrated: 790 ± 150 S m −1 , freeze‐dried: 4420 ± 576 S m −1 ). Integrated on biodegradable gelatin‐based substrates, MXgel bioelectronics exhibit low electrochemical impedance (1.06 ± 0.37 kΩ at 1 kHz), 25‐fold higher cathodic charge storage (207.1 ± 48.8 mC cm −2 ), and 10‐fold greater charge injection capacity (0.24 ± 0.08 mC cm −2 ) than conventional clinical electrodes. We demonstrate that these properties enable cortical and peripheral neural recordings with ∼60 dB signal‐to‐noise ratio and effective neuromodulation. Moreover, MXgel bioelectronics undergo safe degradation under physiological conditions with predictable and tunable kinetics. Importantly, MXgel bioelectronics do not trigger severe foreign body reaction, and their degradation byproducts do not accumulate in the body, confirming safe systemic clearance. Together, these results establish MXgel bioelectronics as a clinically relevant platform for soft, high‐performance, and transient neural interfaces.
- Open Access
- 24 September 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (39) , 26511-26520
Anomalous Microwave Absorption Hysteresis in Ultrathin MXene Films with Confined Water
MXenes, a family of two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, are promising materials for electromagnetic interference (EMI) shielding due to their electronic conductivity, tunable surface functionalization, and adjustable interlayer spacing. In many practical environments, MXene films host water molecules between the carbide or nitride nanosheets. However, the influence of confined water on their microwave absorption remains unclear. Here, we investigate the role of water confinement in governing microwave absorption in Ti3C2Tx MXene films. In situ humidity-dependent measurements reveal that protonated films exhibit a 56% increase in absorption even without measurable changes in interlayer spacing. In contrast, Li+-intercalated films, which undergo interlayer swelling upon water uptake, show a 167% increase in absorption. The observed enhancement in microwave absorption upon water uptake is approximately 4 orders of magnitude larger than what would be expected from the increase in bulk water content alone. These changes indicate that water confined within MXene films produces microwave absorption behavior, unlike that of conventional microwave shielding materials where impedance matching is achieved by varying material thickness. The results clarify the role of confined water in EMI absorption in MXenes and indicate that water confinement can serve as a tunable parameter for engineering high-performance EMI shielding materials.
- 24 September 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (39) , 26511-26520
Open AccessAnomalous Microwave Absorption Hysteresis in Ultrathin MXene Films with Confined Water
MXenes, a family of two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides, are promising materials for electromagnetic interference (EMI) shielding due to their electronic conductivity, tunable surface functionalization, and adjustable interlayer spacing. In many practical environments, MXene films host water molecules between the carbide or nitride nanosheets. However, the influence of confined water on their microwave absorption remains unclear. Here, we investigate the role of water confinement in governing microwave absorption in Ti3C2Tx MXene films. In situ humidity-dependent measurements reveal that protonated films exhibit a 56% increase in absorption even without measurable changes in interlayer spacing. In contrast, Li+-intercalated films, which undergo interlayer swelling upon water uptake, show a 167% increase in absorption. The observed enhancement in microwave absorption upon water uptake is approximately 4 orders of magnitude larger than what would be expected from the increase in bulk water content alone. These changes indicate that water confined within MXene films produces microwave absorption behavior, unlike that of conventional microwave shielding materials where impedance matching is achieved by varying material thickness. The results clarify the role of confined water in EMI absorption in MXenes and indicate that water confinement can serve as a tunable parameter for engineering high-performance EMI shielding materials.
- Open Access
- 3 September 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (18) , 10635-10657
Low-Dimensional Ionotronics
Ionotronics encompasses a broad range of phenomena and devices based either on the electron-controlled manipulation of ions in electrolytic media or on the use of ionic behavior to control electronic functionality. Although the term itself is relatively recent, the scientific foundations of ionotronics span more than a century of research. Owing to their promising applications in areas ranging from energy storage and harvesting to robotic actuation, nanofiltration, water desalination, sensing, and neuromorphic computation, ionotronic systems have recently attracted rapidly growing attention, particularly in the context of low-dimensional electrodes. These advanced architectures can profoundly modify the electrode–electrolyte interface, where ion transport and interfacial phenomena play a central role. Such systems exhibit distinctive physics arising either from nanoscale confinement, which restricts the electrolyte to only a few layers of ions or solvent molecules, or from low-dimensional electronic effects imposed by confining materials such as graphene, carbon nanotubes, and MXenes. This Focus Review aims to provide a comprehensive yet accessible overview of the fundamental phenomena governing low-dimensional ionotronic systems, with particular emphasis on the underlying physics that determines their performance and enables emerging applications.
- 3 September 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (18) , 10635-10657
Open AccessLow-Dimensional Ionotronics
Ionotronics encompasses a broad range of phenomena and devices based either on the electron-controlled manipulation of ions in electrolytic media or on the use of ionic behavior to control electronic functionality. Although the term itself is relatively recent, the scientific foundations of ionotronics span more than a century of research. Owing to their promising applications in areas ranging from energy storage and harvesting to robotic actuation, nanofiltration, water desalination, sensing, and neuromorphic computation, ionotronic systems have recently attracted rapidly growing attention, particularly in the context of low-dimensional electrodes. These advanced architectures can profoundly modify the electrode–electrolyte interface, where ion transport and interfacial phenomena play a central role. Such systems exhibit distinctive physics arising either from nanoscale confinement, which restricts the electrolyte to only a few layers of ions or solvent molecules, or from low-dimensional electronic effects imposed by confining materials such as graphene, carbon nanotubes, and MXenes. This Focus Review aims to provide a comprehensive yet accessible overview of the fundamental phenomena governing low-dimensional ionotronic systems, with particular emphasis on the underlying physics that determines their performance and enables emerging applications.
- Open Access
- 1 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (29) , 31253-31262
Water-Mediated Ion Selectivity in 2D MXene Channels
At the Ångström scale, water confined between two-dimensional layers behaves fundamentally differently from bulk water; this behavior governs ion transport in natural and engineered nanofluidic systems, yet the mechanisms by which confined water mediates selective ion transport remain poorly understood. As classical descriptions of aqueous ion transport break down under extreme confinement, experimental studies often face challenges in controlling both nanoconfined structure and surface chemistry, limiting our ability to explain and predict water and ion behavior in subnanometer channels and membranes. Here, we show that 2D Ti3C2Tx MXene nanosheets with precisely controlled interlayer spacing (0.9–5.0 Å), surface terminations, and electrode potentials provide a platform to systematically tune ion transport. Combined experimental measurements, including ion permeation, spatial secondary-ion mass spectrometry, and Fourier transform infrared spectroscopy, together with molecular dynamics simulations, reveal that ultranarrow confinement reorganizes confined water, imposes ion-specific energetic penalties for dehydration, and modulates ion–MXene interactions. Li+ permeation in horizontally aligned Ti3C2Tx channels is 2 orders of magnitude faster than in conventional vertically aligned MXene membranes, while electrochemical surface charge modulation further regulates ion selectivity. These coupled effects of confinement, surface chemistry, and water-mediated energetics define a transport regime beyond classical diffusion, offering design principles for artificial ion channels and high-performance membranes for ion separation, water desalination, and sustainable water treatment technologies.
- 1 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (29) , 31253-31262
Open AccessWater-Mediated Ion Selectivity in 2D MXene Channels
At the Ångström scale, water confined between two-dimensional layers behaves fundamentally differently from bulk water; this behavior governs ion transport in natural and engineered nanofluidic systems, yet the mechanisms by which confined water mediates selective ion transport remain poorly understood. As classical descriptions of aqueous ion transport break down under extreme confinement, experimental studies often face challenges in controlling both nanoconfined structure and surface chemistry, limiting our ability to explain and predict water and ion behavior in subnanometer channels and membranes. Here, we show that 2D Ti3C2Tx MXene nanosheets with precisely controlled interlayer spacing (0.9–5.0 Å), surface terminations, and electrode potentials provide a platform to systematically tune ion transport. Combined experimental measurements, including ion permeation, spatial secondary-ion mass spectrometry, and Fourier transform infrared spectroscopy, together with molecular dynamics simulations, reveal that ultranarrow confinement reorganizes confined water, imposes ion-specific energetic penalties for dehydration, and modulates ion–MXene interactions. Li+ permeation in horizontally aligned Ti3C2Tx channels is 2 orders of magnitude faster than in conventional vertically aligned MXene membranes, while electrochemical surface charge modulation further regulates ion selectivity. These coupled effects of confinement, surface chemistry, and water-mediated energetics define a transport regime beyond classical diffusion, offering design principles for artificial ion channels and high-performance membranes for ion separation, water desalination, and sustainable water treatment technologies.
- Open Access
- 27 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (17) , 12695-12711
Operation of MXene-Derived Zinc-Preintercalated Bilayered Vanadium Oxide Cathode in Aqueous Zn-Ion Batteries
Layered hydrated vanadium oxides, particularly those with bilayered structures, show remarkable electrochemical performance as cathodes for aqueous Zn-ion batteries (AZIBs). However, their wide-scale adoption is hindered by limited understanding of their charge storage mechanisms in different Zn-containing electrolytes. Here, we demonstrate the first synthesis of a MXene-derived Zn-preintercalated bilayered vanadium oxide (MD-ZVO) with a nanoflower-like morphology comprised of two-dimensional (2D) nanosheets, achieved via a two-step dissolution–recrystallization process. The strategic Zn2+ preintercalation establishes well-defined ion diffusion pathways, while the nanoflower-like assembly of 2D nanosheets enhances structural integrity, together contributing to improved electrochemical performance over other layered vanadium oxides. A systematic evaluation of four electrolytes (2 M ZnSO4, 2.6 M Zn(OTf)2, 2 M ZnCl2, and 30 m ZnCl2) showed that MD-ZVO electrodes delivered high reversible capacities (450 and 315 mAh g–1 at 0.1 A g–1), excellent rate capability (223 mAh g–1 for both electrolytes at 1.0 A g–1), and good electrochemical stability (84% and 48% over 1000 cycles at 1.0 A g–1) in saturated 2.6 M Zn(OTf)2 and highly concentrated 30 m ZnCl2, respectively. The material’s superior electrochemical stability in concentrated electrolytes is attributed to suppressed vanadium oxide dissolution during cycling. In situ and ex situ XRD analyses of MD-ZVO electrodes reveal larger contribution of Zn2+-associated species for charge storage in cells containing 2.6 M Zn(OTf)2 and proton dominant charge transfer in cells containing 30 m ZnCl2. Additionally, the combination of in situ and ex situ characterization demonstrates the reversible formation of Zn x OTf y (OH)2x–y ·nH2O in cells using 2.6 M Zn(OTf)2 and Zn5(OH)8Cl2·H2O in cells using 30 m ZnCl2 on the MD-ZVO electrode surface over extended cycling. This work highlights the superior performance of nanoflower MD-ZVO for cathodes in aqueous Zn-ion batteries, which benefits from the proper selection of highly concentrated electrolytes that enable better utilization of the cathode material.
- 27 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (17) , 12695-12711
Open AccessOperation of MXene-Derived Zinc-Preintercalated Bilayered Vanadium Oxide Cathode in Aqueous Zn-Ion Batteries
Layered hydrated vanadium oxides, particularly those with bilayered structures, show remarkable electrochemical performance as cathodes for aqueous Zn-ion batteries (AZIBs). However, their wide-scale adoption is hindered by limited understanding of their charge storage mechanisms in different Zn-containing electrolytes. Here, we demonstrate the first synthesis of a MXene-derived Zn-preintercalated bilayered vanadium oxide (MD-ZVO) with a nanoflower-like morphology comprised of two-dimensional (2D) nanosheets, achieved via a two-step dissolution–recrystallization process. The strategic Zn2+ preintercalation establishes well-defined ion diffusion pathways, while the nanoflower-like assembly of 2D nanosheets enhances structural integrity, together contributing to improved electrochemical performance over other layered vanadium oxides. A systematic evaluation of four electrolytes (2 M ZnSO4, 2.6 M Zn(OTf)2, 2 M ZnCl2, and 30 m ZnCl2) showed that MD-ZVO electrodes delivered high reversible capacities (450 and 315 mAh g–1 at 0.1 A g–1), excellent rate capability (223 mAh g–1 for both electrolytes at 1.0 A g–1), and good electrochemical stability (84% and 48% over 1000 cycles at 1.0 A g–1) in saturated 2.6 M Zn(OTf)2 and highly concentrated 30 m ZnCl2, respectively. The material’s superior electrochemical stability in concentrated electrolytes is attributed to suppressed vanadium oxide dissolution during cycling. In situ and ex situ XRD analyses of MD-ZVO electrodes reveal larger contribution of Zn2+-associated species for charge storage in cells containing 2.6 M Zn(OTf)2 and proton dominant charge transfer in cells containing 30 m ZnCl2. Additionally, the combination of in situ and ex situ characterization demonstrates the reversible formation of Zn x OTf y (OH)2x–y ·nH2O in cells using 2.6 M Zn(OTf)2 and Zn5(OH)8Cl2·H2O in cells using 30 m ZnCl2 on the MD-ZVO electrode surface over extended cycling. This work highlights the superior performance of nanoflower MD-ZVO for cathodes in aqueous Zn-ion batteries, which benefits from the proper selection of highly concentrated electrolytes that enable better utilization of the cathode material.
- 14 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (35) , 49400-49408
Suppression of Halide Ion Crossover in Zn–Halide Batteries by 2D MXene Membranes
A major challenge in Zn-halide batteries is rapid self-discharge caused by migration of halide ions to metallic Zn. Conventional Nafion or polyolefin separators, are commonly used to mitigate anion crossover, but they are costly and often ineffective in blocking corrosive halides. Recently, Ti3C2Tx (MXene) has emerged as a promising alternative due to its negatively charged surface and stability in halide electrolytes. This study demonstrates the effectiveness of MXene membranes in reducing halide ion (Cl-, Br-, and I-) crossover and provides insights into the ion transport mechanism through systematic electrochemical studies, electrolyte property measurements, and ab initio molecular dynamics simulations. MXene membranes exhibit significantly improved anion selectivity compared to Nafion, making them an attractive candidate for halide-based battery applications. Their potential to enhance battery performance and stability offers a compelling solution for addressing self-discharge in Zn-halide batteries.
- 14 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (35) , 49400-49408
Suppression of Halide Ion Crossover in Zn–Halide Batteries by 2D MXene Membranes
A major challenge in Zn-halide batteries is rapid self-discharge caused by migration of halide ions to metallic Zn. Conventional Nafion or polyolefin separators, are commonly used to mitigate anion crossover, but they are costly and often ineffective in blocking corrosive halides. Recently, Ti3C2Tx (MXene) has emerged as a promising alternative due to its negatively charged surface and stability in halide electrolytes. This study demonstrates the effectiveness of MXene membranes in reducing halide ion (Cl-, Br-, and I-) crossover and provides insights into the ion transport mechanism through systematic electrochemical studies, electrolyte property measurements, and ab initio molecular dynamics simulations. MXene membranes exhibit significantly improved anion selectivity compared to Nafion, making them an attractive candidate for halide-based battery applications. Their potential to enhance battery performance and stability offers a compelling solution for addressing self-discharge in Zn-halide batteries.
- Top Cited PapersOpen Access
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22228-22239
In Situ Raman and Fourier Transform Infrared Spectroscopy Studies of MXene−Electrolyte Interfaces
A comprehensive understanding of electrochemical interfaces is essential for the optimal performance of electrocatalysts, supercapacitors, and batteries. However, understanding the electrochemical behavior of MXenes during electrochemical processes by any single technique does not provide a whole picture. We achieved real-time monitoring in the complete near-mid-infrared chemical range by utilizing Raman spectroscopy (near-infrared (NIR) excitation) and Fourier transform infrared (FTIR) spectroscopy in the mid-infrared (MIR) range. The change of intramolecular O-H vibrations of MXene-confined water was monitored in real time using FTIR, while surface terminations were monitored by using Raman spectroscopy. The dynamic interplay between charge storage and the change in MXene surface chemistry was studied by employing representative electrolytes (0.5 M H2SO4, 1 M LiCl, and 6 M KOH) and comparing hydrophilic Ti3C2Tx with mixed-terminations (T = O/OH/F) with hydrophobic chlorine-terminated Ti3C2Cl2 MXene electrodes. Ab initio molecular dynamics (MD) simulations and density functional theory (DFT) calculations were used to shed light on ion insertion with a dynamic change of ion solvation and reveal the structure of the MXene-confined water.
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (24) , 22228-22239
Top Cited PapersOpen AccessIn Situ Raman and Fourier Transform Infrared Spectroscopy Studies of MXene−Electrolyte Interfaces
A comprehensive understanding of electrochemical interfaces is essential for the optimal performance of electrocatalysts, supercapacitors, and batteries. However, understanding the electrochemical behavior of MXenes during electrochemical processes by any single technique does not provide a whole picture. We achieved real-time monitoring in the complete near-mid-infrared chemical range by utilizing Raman spectroscopy (near-infrared (NIR) excitation) and Fourier transform infrared (FTIR) spectroscopy in the mid-infrared (MIR) range. The change of intramolecular O-H vibrations of MXene-confined water was monitored in real time using FTIR, while surface terminations were monitored by using Raman spectroscopy. The dynamic interplay between charge storage and the change in MXene surface chemistry was studied by employing representative electrolytes (0.5 M H2SO4, 1 M LiCl, and 6 M KOH) and comparing hydrophilic Ti3C2Tx with mixed-terminations (T = O/OH/F) with hydrophobic chlorine-terminated Ti3C2Cl2 MXene electrodes. Ab initio molecular dynamics (MD) simulations and density functional theory (DFT) calculations were used to shed light on ion insertion with a dynamic change of ion solvation and reveal the structure of the MXene-confined water.
- 15 September 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (43)
Obtaining a Practical Wearable Supercapacitor Power Supply
Due to the ubiquity of textiles in the lives, electronic textiles (E‐textiles) have emerged as a future technology capable of addressing a myriad of challenges from mixed reality interfaces, on‐garment climate control, patient diagnostics, and interactive athletic wear. However, providing sufficient electrical power in a textile form factor has remained elusive. To address this issue, different approaches are discussed, starting with supercapacitors' advantages and limitations and material choices for textile‐based supercapacitors before discussing proper data analysis and design considerations of textile‐based energy storage to power wearable electronics.
- 15 September 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (43)
Obtaining a Practical Wearable Supercapacitor Power Supply
Due to the ubiquity of textiles in the lives, electronic textiles (E‐textiles) have emerged as a future technology capable of addressing a myriad of challenges from mixed reality interfaces, on‐garment climate control, patient diagnostics, and interactive athletic wear. However, providing sufficient electrical power in a textile form factor has remained elusive. To address this issue, different approaches are discussed, starting with supercapacitors' advantages and limitations and material choices for textile‐based supercapacitors before discussing proper data analysis and design considerations of textile‐based energy storage to power wearable electronics.
- Open Access
- 18 January 2022
- Published by Wiley in Advanced Sustainable Systems
- Vol. 6 (3) , 2100383
Time‐Dependent Cation Selectivity of Titanium Carbide MXene in Aqueous Solution
Electrochemical ion separation is a promising technology to recover valuable ionic species from water. Pseudocapacitive materials, especially 2D materials, are up‐and‐coming electrodes for electrochemical ion separation. For implementation, it is essential to understand the interplay of the intrinsic preference of a specific ion (by charge/size), kinetic ion preference (by mobility), and crystal structure changes. Ti3C2Tz MXene is chosen here to investigate its selective behavior toward alkali and alkaline earth cations. Utilizing an online inductively coupled plasma system, it is found that Ti3C2Tz shows a time‐dependent selectivity feature. In the early stage of charging (up to about 50 min), K+ is preferred, while ultimately Ca2+ and Mg2+ uptake dominate; this unique phenomenon is related to dehydration energy barriers and the ion exchange effect between divalent and monovalent cations. Given the wide variety of MXenes, this work opens the door to a new avenue where selective ion‐separation with MXene can be further engineered and optimized.
- 18 January 2022
- Published by Wiley in Advanced Sustainable Systems
- Vol. 6 (3) , 2100383
Open AccessTime‐Dependent Cation Selectivity of Titanium Carbide MXene in Aqueous Solution
Electrochemical ion separation is a promising technology to recover valuable ionic species from water. Pseudocapacitive materials, especially 2D materials, are up‐and‐coming electrodes for electrochemical ion separation. For implementation, it is essential to understand the interplay of the intrinsic preference of a specific ion (by charge/size), kinetic ion preference (by mobility), and crystal structure changes. Ti3C2Tz MXene is chosen here to investigate its selective behavior toward alkali and alkaline earth cations. Utilizing an online inductively coupled plasma system, it is found that Ti3C2Tz shows a time‐dependent selectivity feature. In the early stage of charging (up to about 50 min), K+ is preferred, while ultimately Ca2+ and Mg2+ uptake dominate; this unique phenomenon is related to dehydration energy barriers and the ion exchange effect between divalent and monovalent cations. Given the wide variety of MXenes, this work opens the door to a new avenue where selective ion‐separation with MXene can be further engineered and optimized.
- Open Access
- 11 January 2022
- Published by Elsevier in Electrochemistry Communications
- Vol. 136, 107211
Emerging, hydrogen-driven electrochemical water purification
- 11 January 2022
- Published by Elsevier in Electrochemistry Communications
- Vol. 136, 107211
Open AccessEmerging, hydrogen-driven electrochemical water purification